TY  - JOUR
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/788
AB  - The properties which determine whether the metal surface is mirror bright are precisely determined by scanning electron microscopy (SEM), atomic forces microscopy (AFM), scanning tunneling microscopy (STM) and reflectance spectrophotometry investigations. Mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal with the lowest degree of diffuse reflection. Mirror brightness of the copper coatings and the copper surfaces polished both mechanically and electrochemically was determined by fiat and mutually parallel parts of the surface, which are smooth on the atomic level and which point out towards layer structure of these surfaces. Mirror bright metal surfaces can be obtained only by electrochemical polishing or electrochemical deposition in the presence of brightening addition agents.
PB  - Soc Chemists Technologists Madeconia, Skopje
T2  - Macedonian Journal of Chemistry and Chemical Engineering
T1  - Morphology and structure of bright electrodeposited metal coatings
VL  - 30
IS  - 1
SP  - 29
EP  - 44
UR  - https://hdl.handle.net/21.15107/rcub_cer_788
ER  - 

@article{
author = "Pavlović, Miomir and Pavlović, Ljubica",
year = "2011",
abstract = "The properties which determine whether the metal surface is mirror bright are precisely determined by scanning electron microscopy (SEM), atomic forces microscopy (AFM), scanning tunneling microscopy (STM) and reflectance spectrophotometry investigations. Mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal with the lowest degree of diffuse reflection. Mirror brightness of the copper coatings and the copper surfaces polished both mechanically and electrochemically was determined by fiat and mutually parallel parts of the surface, which are smooth on the atomic level and which point out towards layer structure of these surfaces. Mirror bright metal surfaces can be obtained only by electrochemical polishing or electrochemical deposition in the presence of brightening addition agents.",
publisher = "Soc Chemists Technologists Madeconia, Skopje",
journal = "Macedonian Journal of Chemistry and Chemical Engineering",
title = "Morphology and structure of bright electrodeposited metal coatings",
volume = "30",
number = "1",
pages = "29-44",
url = "https://hdl.handle.net/21.15107/rcub_cer_788"
}

Pavlović, M.,& Pavlović, L.. (2011). Morphology and structure of bright electrodeposited metal coatings. in Macedonian Journal of Chemistry and Chemical Engineering
Soc Chemists Technologists Madeconia, Skopje., 30(1), 29-44.
https://hdl.handle.net/21.15107/rcub_cer_788

Pavlović M, Pavlović L. Morphology and structure of bright electrodeposited metal coatings. in Macedonian Journal of Chemistry and Chemical Engineering. 2011;30(1):29-44.
https://hdl.handle.net/21.15107/rcub_cer_788 .

Pavlović, Miomir, Pavlović, Ljubica, "Morphology and structure of bright electrodeposited metal coatings" in Macedonian Journal of Chemistry and Chemical Engineering, 30, no. 1 (2011):29-44,
https://hdl.handle.net/21.15107/rcub_cer_788 .

TY  - JOUR
AU  - Gajić, Anto S.
AU  - Tomić, Milorad V.
AU  - Pavlović, Ljubica
AU  - Pavlović, Miomir
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/724
AB  - This paper presents sources and types of corrosion processes of boiler tube system of the Thermal Power Plant 'Ugljevik'. The main goal in the electric power production is to achieve lower prices, which can only be done by providing low maintenance costs. While it is not possible to completely stop corrosion, it could be slowed down and its effects could be reduced. In order to reduce corrosion to a minimum on thermal power plants' vital equipment, particularly boilers, it is necessary to determine in each particular case the acting mechanism of corrosion and agents that cause it. Damages and failures on thermal power plants are largely caused by the development of various types of corrosion processes. Special attention is given to the preparation of water, considering its importance to the occurrence of corrosion. The following types of corrosion were detected on the screen tube boiler by visual examination on the side of water and steam: erosive, pitting and impact corrosion. The inner surface of screen pipes, from which the scale layer was removed, indicates that the erosive corrosion with the thinning of pipe walls occurs. Perforation of the welded screen pipes shows that stress corrosion occurred on the screen pipe with formation of cracks and that pipe exploded. Pits on the inner surface of the screen pipes, visible after the removal of scale and corrosion products, are proof that pitting corrosion occurred. The causes of corrosion were discovered and proposed measures for their elimination were given.
AB  - U ovom radu su prikazani osnovi i vrste korozionih procesa cevnog sistema kotla TE 'Ugljevik', R. Srpska. Korozione procese nije moguće u potpunosti zaustaviti, ali se oni mogu usporiti pa i smanjiti posledice koje oni izazivaju. Da bi se korozija vitalne opreme termoenergetskih postrojenja, a naročito kotlova, svela na minimum, neophodno je u svakom pojedinačnom slučaju odrediti delujući mehanizam korozije kao i uzročnike koji ga izazivaju. Oštećenja i njima izazvani zastoji u radu termoenergetskih postrojenja u velikom broju su izazvani odvijanjem različitih tipova korozionih procesa. Posebna pažnja je posvećena pripremi vode, s obzirom na njen uticaj na pojavu korozije. Vizuelnim pregledom su utvrđene sledeće vrste korozije na ekranskim cevima kotla sa strane vode i pare: eroziona, jamasta i naponska sa prslinama. Unutrašnje površine ekranskih cevi sa kojih je uklonjen ('sljušten') sloj kamenca ukazuju da je usled erozije dolazilo do skidanja kamenca i produkata korozije, odnosno erozione korozije, uz stanjivanje zidova cevi. Prsline (perforacije) na ekranskim cevima koje su zavarene, pokazuju da se odigrala naponska korozija cevi sa obrazovanjem prslina, odnosno da je došlo do pucanja cevi. Rupice (udubljenja) na unutrašnjoj površini ekranskih cevi, vidljive nakon uklanjanja kamenca i produkata korozije, dokaz su da se odigrala tačkasta korozija. Istaknuti su potencijalni uzročnici korozije i dat je predlog mera za njihovo eliminisanje.
PB  - Association of Chemical Engineers of Serbia
T2  - Hemijska industrija
T1  - The effect of water quality on reliability of boiler plants performance
T1  - Uticaj kvaliteta vode na pouzdanost rada kotlovskih postrojenja
VL  - 64
IS  - 4
SP  - 311
EP  - 317
DO  - 10.2298/HEMIND100316018G
ER  - 

@article{
author = "Gajić, Anto S. and Tomić, Milorad V. and Pavlović, Ljubica and Pavlović, Miomir",
year = "2010",
abstract = "This paper presents sources and types of corrosion processes of boiler tube system of the Thermal Power Plant 'Ugljevik'. The main goal in the electric power production is to achieve lower prices, which can only be done by providing low maintenance costs. While it is not possible to completely stop corrosion, it could be slowed down and its effects could be reduced. In order to reduce corrosion to a minimum on thermal power plants' vital equipment, particularly boilers, it is necessary to determine in each particular case the acting mechanism of corrosion and agents that cause it. Damages and failures on thermal power plants are largely caused by the development of various types of corrosion processes. Special attention is given to the preparation of water, considering its importance to the occurrence of corrosion. The following types of corrosion were detected on the screen tube boiler by visual examination on the side of water and steam: erosive, pitting and impact corrosion. The inner surface of screen pipes, from which the scale layer was removed, indicates that the erosive corrosion with the thinning of pipe walls occurs. Perforation of the welded screen pipes shows that stress corrosion occurred on the screen pipe with formation of cracks and that pipe exploded. Pits on the inner surface of the screen pipes, visible after the removal of scale and corrosion products, are proof that pitting corrosion occurred. The causes of corrosion were discovered and proposed measures for their elimination were given., U ovom radu su prikazani osnovi i vrste korozionih procesa cevnog sistema kotla TE 'Ugljevik', R. Srpska. Korozione procese nije moguće u potpunosti zaustaviti, ali se oni mogu usporiti pa i smanjiti posledice koje oni izazivaju. Da bi se korozija vitalne opreme termoenergetskih postrojenja, a naročito kotlova, svela na minimum, neophodno je u svakom pojedinačnom slučaju odrediti delujući mehanizam korozije kao i uzročnike koji ga izazivaju. Oštećenja i njima izazvani zastoji u radu termoenergetskih postrojenja u velikom broju su izazvani odvijanjem različitih tipova korozionih procesa. Posebna pažnja je posvećena pripremi vode, s obzirom na njen uticaj na pojavu korozije. Vizuelnim pregledom su utvrđene sledeće vrste korozije na ekranskim cevima kotla sa strane vode i pare: eroziona, jamasta i naponska sa prslinama. Unutrašnje površine ekranskih cevi sa kojih je uklonjen ('sljušten') sloj kamenca ukazuju da je usled erozije dolazilo do skidanja kamenca i produkata korozije, odnosno erozione korozije, uz stanjivanje zidova cevi. Prsline (perforacije) na ekranskim cevima koje su zavarene, pokazuju da se odigrala naponska korozija cevi sa obrazovanjem prslina, odnosno da je došlo do pucanja cevi. Rupice (udubljenja) na unutrašnjoj površini ekranskih cevi, vidljive nakon uklanjanja kamenca i produkata korozije, dokaz su da se odigrala tačkasta korozija. Istaknuti su potencijalni uzročnici korozije i dat je predlog mera za njihovo eliminisanje.",
publisher = "Association of Chemical Engineers of Serbia",
journal = "Hemijska industrija",
title = "The effect of water quality on reliability of boiler plants performance, Uticaj kvaliteta vode na pouzdanost rada kotlovskih postrojenja",
volume = "64",
number = "4",
pages = "311-317",
doi = "10.2298/HEMIND100316018G"
}

Gajić, A. S., Tomić, M. V., Pavlović, L.,& Pavlović, M.. (2010). The effect of water quality on reliability of boiler plants performance. in Hemijska industrija
Association of Chemical Engineers of Serbia., 64(4), 311-317.
https://doi.org/10.2298/HEMIND100316018G

Gajić AS, Tomić MV, Pavlović L, Pavlović M. The effect of water quality on reliability of boiler plants performance. in Hemijska industrija. 2010;64(4):311-317.
doi:10.2298/HEMIND100316018G .

Gajić, Anto S., Tomić, Milorad V., Pavlović, Ljubica, Pavlović, Miomir, "The effect of water quality on reliability of boiler plants performance" in Hemijska industrija, 64, no. 4 (2010):311-317,
https://doi.org/10.2298/HEMIND100316018G . .

TY  - JOUR
AU  - Gajić, Anto S.
AU  - Tomić, Milorad V.
AU  - Pavlović, Ljubica
AU  - Pavlović, Miomir
PY  - 2010
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/747
AB  - Damage and cancellations of thermal power plants in large numbers are caused due to an inadequate quality of feed water, which occur due to different types of corrosion processes. Water is a good solvent and its chemical composition contains a large number of ingredients which provide its very complex chemical composition. That is the reason why raw water provides possibilities of complex and different corrosion processes. Since water is a basic fluid in power plants, it needs adequate preparation in order to minimize corrosion processes and to control them. It is necessary in each particular case to determine the acting mechanism of corrosion and sources that cause it. This paper presents the basic causes that lead to corrosion in thermal power plants. To achieve a high level of reliability of power plants and achieve their expected lifetime it is necessary to provide high quality water, due to its importance for the occurrence of corrosion. .
AB  - Oštećenja i njima izazvani otkazi termoenergetskih postrojenja u velikom broju su izazvani usled neadekvatnog kvaliteta napojne vode, usled čega se odvijaju različiti tipovi korozionih procesa. Voda je dobar rastvarač i u svom hemijskom sastavu sadrži i veliki broj primesa koje joj daju veoma složen hemijski sastav. Upravo zbog toga sirova voda pruža mogućnost odvijanja niza kompleksnih i različitih korozionih procesa. Zbog toga je vodu, kao osnovni fluid u termoenergetskim postrojenjima, potrebno podvrgnuti adekvatnoj pripremi kako bi se korozioni procesi sveli na minimum i mogli kontrolisati. Neophodno je u svakom pojedinačnom slučaju odrediti delujući mehanizam korozije i uzročnike koji ga izazivaju. U radu su prikazani osnovni uzroci koji dovde do korozije termoenergetskih postrojenja. Da bi se ostvario visok nivo pouzdanosti rada termoelektrana i postigao njihov očekivani radni vek mora se obezbediti visok kvalitet vode, s obzirom na njen značaj za pojavu korozije.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - Water quality as one of the possible causative agents of corrosion in thermal power plants
T1  - Kvalitet vode kao jedan od mogućih uzročnika korozije u termoenergetskim postrojenjima
VL  - 51
IS  - 1
SP  - 29
EP  - 34
UR  - https://hdl.handle.net/21.15107/rcub_cer_747
ER  - 

@article{
author = "Gajić, Anto S. and Tomić, Milorad V. and Pavlović, Ljubica and Pavlović, Miomir",
year = "2010",
abstract = "Damage and cancellations of thermal power plants in large numbers are caused due to an inadequate quality of feed water, which occur due to different types of corrosion processes. Water is a good solvent and its chemical composition contains a large number of ingredients which provide its very complex chemical composition. That is the reason why raw water provides possibilities of complex and different corrosion processes. Since water is a basic fluid in power plants, it needs adequate preparation in order to minimize corrosion processes and to control them. It is necessary in each particular case to determine the acting mechanism of corrosion and sources that cause it. This paper presents the basic causes that lead to corrosion in thermal power plants. To achieve a high level of reliability of power plants and achieve their expected lifetime it is necessary to provide high quality water, due to its importance for the occurrence of corrosion. ., Oštećenja i njima izazvani otkazi termoenergetskih postrojenja u velikom broju su izazvani usled neadekvatnog kvaliteta napojne vode, usled čega se odvijaju različiti tipovi korozionih procesa. Voda je dobar rastvarač i u svom hemijskom sastavu sadrži i veliki broj primesa koje joj daju veoma složen hemijski sastav. Upravo zbog toga sirova voda pruža mogućnost odvijanja niza kompleksnih i različitih korozionih procesa. Zbog toga je vodu, kao osnovni fluid u termoenergetskim postrojenjima, potrebno podvrgnuti adekvatnoj pripremi kako bi se korozioni procesi sveli na minimum i mogli kontrolisati. Neophodno je u svakom pojedinačnom slučaju odrediti delujući mehanizam korozije i uzročnike koji ga izazivaju. U radu su prikazani osnovni uzroci koji dovde do korozije termoenergetskih postrojenja. Da bi se ostvario visok nivo pouzdanosti rada termoelektrana i postigao njihov očekivani radni vek mora se obezbediti visok kvalitet vode, s obzirom na njen značaj za pojavu korozije.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "Water quality as one of the possible causative agents of corrosion in thermal power plants, Kvalitet vode kao jedan od mogućih uzročnika korozije u termoenergetskim postrojenjima",
volume = "51",
number = "1",
pages = "29-34",
url = "https://hdl.handle.net/21.15107/rcub_cer_747"
}

Gajić, A. S., Tomić, M. V., Pavlović, L.,& Pavlović, M.. (2010). Water quality as one of the possible causative agents of corrosion in thermal power plants. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 51(1), 29-34.
https://hdl.handle.net/21.15107/rcub_cer_747

Gajić AS, Tomić MV, Pavlović L, Pavlović M. Water quality as one of the possible causative agents of corrosion in thermal power plants. in Zaštita materijala. 2010;51(1):29-34.
https://hdl.handle.net/21.15107/rcub_cer_747 .

Gajić, Anto S., Tomić, Milorad V., Pavlović, Ljubica, Pavlović, Miomir, "Water quality as one of the possible causative agents of corrosion in thermal power plants" in Zaštita materijala, 51, no. 1 (2010):29-34,
https://hdl.handle.net/21.15107/rcub_cer_747 .

TY  - JOUR
AU  - Pavlović, M. G.
AU  - Tomić, M. V.
AU  - Pavlović, Ljubica
AU  - Maksimović, Vesna M.
AU  - Nikolić, Nebojša D.
PY  - 2009
UR  - https://jepm.tfzv.ues.rs.ba/index.php/Journal/article/view/115
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3933
AB  - Ispitivan je uticaj različitih reţima elektrolize (konstantna i reversna struja) na morfologiju bakarnog praha. Morfologija istaloţenog bakarnog praha je proučavana pomoću skening elektronskog mikroskopa (SEM). Diskutovan je efekat katodne i anodne amplitudne gustine struje, odnos katodnog i anodnog vremena kao i vremena katodnog taloţenja i anodnog rastvaranja. Pokazano je da parametri koji određuju oblik talasa reversne struje određuju i mikromorfologiju čestica istaloţenog bakarnog praha.
AB  - The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The morphology of electrodeposited copper powder was investigated using a scanning electron microscope (SEM). The effect of the current amplitude, cathodic to anodic time ratio and period of the current wave are discussed. It is shown that the parameters determining the reversing current wave determine the micro-morphology of the copper powder particles deposited.
PB  - Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology
T2  - Journal of Engineering & Processing Management
T1  - Elektrohemijsko dobijanje i morfologija čestica bakarnog praha dobijenog pri različitim retimima elektrolize
T1  - Electrodeposition and morphology of copper powder particles obtained at different current regimes
VL  - 1
IS  - 1
SP  - 47
EP  - 54
UR  - https://hdl.handle.net/21.15107/rcub_cer_3933
ER  - 

@article{
author = "Pavlović, M. G. and Tomić, M. V. and Pavlović, Ljubica and Maksimović, Vesna M. and Nikolić, Nebojša D.",
year = "2009",
abstract = "Ispitivan je uticaj različitih reţima elektrolize (konstantna i reversna struja) na morfologiju bakarnog praha. Morfologija istaloţenog bakarnog praha je proučavana pomoću skening elektronskog mikroskopa (SEM). Diskutovan je efekat katodne i anodne amplitudne gustine struje, odnos katodnog i anodnog vremena kao i vremena katodnog taloţenja i anodnog rastvaranja. Pokazano je da parametri koji određuju oblik talasa reversne struje određuju i mikromorfologiju čestica istaloţenog bakarnog praha., The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The morphology of electrodeposited copper powder was investigated using a scanning electron microscope (SEM). The effect of the current amplitude, cathodic to anodic time ratio and period of the current wave are discussed. It is shown that the parameters determining the reversing current wave determine the micro-morphology of the copper powder particles deposited.",
publisher = "Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology",
journal = "Journal of Engineering & Processing Management",
title = "Elektrohemijsko dobijanje i morfologija čestica bakarnog praha dobijenog pri različitim retimima elektrolize, Electrodeposition and morphology of copper powder particles obtained at different current regimes",
volume = "1",
number = "1",
pages = "47-54",
url = "https://hdl.handle.net/21.15107/rcub_cer_3933"
}

Pavlović, M. G., Tomić, M. V., Pavlović, L., Maksimović, V. M.,& Nikolić, N. D.. (2009). Elektrohemijsko dobijanje i morfologija čestica bakarnog praha dobijenog pri različitim retimima elektrolize. in Journal of Engineering & Processing Management
Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology., 1(1), 47-54.
https://hdl.handle.net/21.15107/rcub_cer_3933

Pavlović MG, Tomić MV, Pavlović L, Maksimović VM, Nikolić ND. Elektrohemijsko dobijanje i morfologija čestica bakarnog praha dobijenog pri različitim retimima elektrolize. in Journal of Engineering & Processing Management. 2009;1(1):47-54.
https://hdl.handle.net/21.15107/rcub_cer_3933 .

Pavlović, M. G., Tomić, M. V., Pavlović, Ljubica, Maksimović, Vesna M., Nikolić, Nebojša D., "Elektrohemijsko dobijanje i morfologija čestica bakarnog praha dobijenog pri različitim retimima elektrolize" in Journal of Engineering & Processing Management, 1, no. 1 (2009):47-54,
https://hdl.handle.net/21.15107/rcub_cer_3933 .

TY  - JOUR
AU  - Tomić, M.V.
AU  - Pavlović, M.G.
AU  - Pavlović, Ljubica J.
AU  - Nikolić, Nebojša D.
PY  - 2009
UR  - https://jepm.tfzv.ues.rs.ba/index.php/Journal/article/view/132
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3926
AB  - Uzorci bakra su podvrgnuti mehaničkom i elektrohemijskom glačanju u odgovarajućim elektrolitima za elektrohemijsko glačanje. Na tako prethodno pripremljene površine supstrata izvršeno je taloţenje prevlaka bakra iz dva kupatila i to iz osnovnog elektrolita (OR) sastava: 240 g/dm3 CuSO4 ∙ 5 H2O + 60 g/dm3 H2SO4 i kupatila sa dodacima za sjaj (OR +DS). Pomoću STM i AFM tehnika precizno su prikazane strukturne osobine koje odreĎuju da li je metalna površina ogledalski sjajna ili ne, odnosno da li dobijena topografija površine manje ili više hrapava. UtvrĎeno je znatno povećanje hrapavosti uzoraka na koje je taloţena prevlaka bakra iz osnovnog sulfatnog kupatila (OR) u odnosu na mehanički i mehanički i elektrohemijske pripremane uzorke. TakoĎe, pri taloţenju prevlaka iz kupatila sa dodacima za sjaj (OR +DS), došlo je do smanjenja hrapavosti površine.
AB  - The samples of rolled copper were mechanically and electrochemically polished in suitable electrolytes for electrochemical polishing. These substrate surfaces that had been prepared in advance, served as the basis for depositing of copper layers from two baths, namely, from the basic electrolyte(OR) with the following composition: 240 g/dm3 CuSO4 ∙ 5 H2O + 60 g/dm3 H2SO4i as well as from the bath which contained brightening addition agents(OR +DS). STM and AFM techniques show in great detail the structural properties which determine whether the metal surfaceis are as bright as a mirrior or not, that is, whether the obtained topography of the surface is more or less rough. It was determined that a considerable increase of roughness occurred in the samples where copper layers were deposited from the basic sulfate bath (OR) when compared with mechanical, and mechanical-electrochemical samples. In addition, depositing of the samples from the bath with brightening addition agents (OR +DS) resulted in the decrease of surface roughness.
PB  - Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology
T2  - Journal of Engineering & Processing Management
T1  - Strukturne karakteristike galvanskih prevlaka bakra
T1  - Structural characteristics of electrodeposited copper coatings
VL  - 1
IS  - 2
SP  - 14
EP  - 25
UR  - https://hdl.handle.net/21.15107/rcub_cer_3926
ER  - 

@article{
author = "Tomić, M.V. and Pavlović, M.G. and Pavlović, Ljubica J. and Nikolić, Nebojša D.",
year = "2009",
abstract = "Uzorci bakra su podvrgnuti mehaničkom i elektrohemijskom glačanju u odgovarajućim elektrolitima za elektrohemijsko glačanje. Na tako prethodno pripremljene površine supstrata izvršeno je taloţenje prevlaka bakra iz dva kupatila i to iz osnovnog elektrolita (OR) sastava: 240 g/dm3 CuSO4 ∙ 5 H2O + 60 g/dm3 H2SO4 i kupatila sa dodacima za sjaj (OR +DS). Pomoću STM i AFM tehnika precizno su prikazane strukturne osobine koje odreĎuju da li je metalna površina ogledalski sjajna ili ne, odnosno da li dobijena topografija površine manje ili više hrapava. UtvrĎeno je znatno povećanje hrapavosti uzoraka na koje je taloţena prevlaka bakra iz osnovnog sulfatnog kupatila (OR) u odnosu na mehanički i mehanički i elektrohemijske pripremane uzorke. TakoĎe, pri taloţenju prevlaka iz kupatila sa dodacima za sjaj (OR +DS), došlo je do smanjenja hrapavosti površine., The samples of rolled copper were mechanically and electrochemically polished in suitable electrolytes for electrochemical polishing. These substrate surfaces that had been prepared in advance, served as the basis for depositing of copper layers from two baths, namely, from the basic electrolyte(OR) with the following composition: 240 g/dm3 CuSO4 ∙ 5 H2O + 60 g/dm3 H2SO4i as well as from the bath which contained brightening addition agents(OR +DS). STM and AFM techniques show in great detail the structural properties which determine whether the metal surfaceis are as bright as a mirrior or not, that is, whether the obtained topography of the surface is more or less rough. It was determined that a considerable increase of roughness occurred in the samples where copper layers were deposited from the basic sulfate bath (OR) when compared with mechanical, and mechanical-electrochemical samples. In addition, depositing of the samples from the bath with brightening addition agents (OR +DS) resulted in the decrease of surface roughness.",
publisher = "Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology",
journal = "Journal of Engineering & Processing Management",
title = "Strukturne karakteristike galvanskih prevlaka bakra, Structural characteristics of electrodeposited copper coatings",
volume = "1",
number = "2",
pages = "14-25",
url = "https://hdl.handle.net/21.15107/rcub_cer_3926"
}

Tomić, M.V., Pavlović, M.G., Pavlović, L. J.,& Nikolić, N. D.. (2009). Strukturne karakteristike galvanskih prevlaka bakra. in Journal of Engineering & Processing Management
Bosnia and Herzegovina : University of East Sarajevo, Faculty of Technology., 1(2), 14-25.
https://hdl.handle.net/21.15107/rcub_cer_3926

Tomić M, Pavlović M, Pavlović LJ, Nikolić ND. Strukturne karakteristike galvanskih prevlaka bakra. in Journal of Engineering & Processing Management. 2009;1(2):14-25.
https://hdl.handle.net/21.15107/rcub_cer_3926 .

Tomić, M.V., Pavlović, M.G., Pavlović, Ljubica J., Nikolić, Nebojša D., "Strukturne karakteristike galvanskih prevlaka bakra" in Journal of Engineering & Processing Management, 1, no. 2 (2009):14-25,
https://hdl.handle.net/21.15107/rcub_cer_3926 .

TY  - JOUR
AU  - Maksimović, Vesna M.
AU  - Pavlović, Ljubica
AU  - Jović, Borka M.
AU  - Pavlović, Miomir
PY  - 2008
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/434
AB  - Polarization characteristics of the electrodeposition processes of Fe powders from sulfate and chloride electrolytes and the morphology of the obtained powders were investigated. The morphology depended on the anion pre sence in the electrolyte but not on the current density in the investigated range. A characteristic feature of the dendritic powder with cauliflower endings obtained from sulfate electrolyte is the presence of cone-like cavities and the crystallite morphology of the powders surface. On the other hand, Fe powders electrodeposited from chloride electrolyte appear in the form of agglomerates. A soap solution treatment applied as a method of washing and drying provides good protection from oxidation of the powders.
AB  - U ovom radu prikazani su rezultati ispitivanja polarizacionih karakteristika procesa taloženja Fe prahova iz sulfatnih i hloridnih elektrolita, kao i morfologija dobijenog praha. Utvrđeno je da morfologija čestica zavisi od vrste anjona prisutnih u elektrolitu, ali ne i od primenjene gustine struje u ispitivanom opsegu. Karakteristično za čestice koje su istaložene iz sulfatnih elektrolita je da su one dendritične sa karfiolastim, kristaliničnim završecima i da poseduju kupaste šupljine. Kod Fe prahova istaloženih iz hloridnih elektrolita uočeni su aglomerati. Korišćenje rastvora sapuna u procesu pranja i sušenja prahova pokazao se kao dobar metod zaštite praha od oksidacije.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Electrodeposition of Fe powder from acid electrolytes
T1  - Elektrohemijsko taloženje Fe prahova iz kiselih elektrolita
VL  - 73
IS  - 8-9
SP  - 861
EP  - 870
DO  - 10.2298/JSC0809861M
ER  - 

@article{
author = "Maksimović, Vesna M. and Pavlović, Ljubica and Jović, Borka M. and Pavlović, Miomir",
year = "2008",
abstract = "Polarization characteristics of the electrodeposition processes of Fe powders from sulfate and chloride electrolytes and the morphology of the obtained powders were investigated. The morphology depended on the anion pre sence in the electrolyte but not on the current density in the investigated range. A characteristic feature of the dendritic powder with cauliflower endings obtained from sulfate electrolyte is the presence of cone-like cavities and the crystallite morphology of the powders surface. On the other hand, Fe powders electrodeposited from chloride electrolyte appear in the form of agglomerates. A soap solution treatment applied as a method of washing and drying provides good protection from oxidation of the powders., U ovom radu prikazani su rezultati ispitivanja polarizacionih karakteristika procesa taloženja Fe prahova iz sulfatnih i hloridnih elektrolita, kao i morfologija dobijenog praha. Utvrđeno je da morfologija čestica zavisi od vrste anjona prisutnih u elektrolitu, ali ne i od primenjene gustine struje u ispitivanom opsegu. Karakteristično za čestice koje su istaložene iz sulfatnih elektrolita je da su one dendritične sa karfiolastim, kristaliničnim završecima i da poseduju kupaste šupljine. Kod Fe prahova istaloženih iz hloridnih elektrolita uočeni su aglomerati. Korišćenje rastvora sapuna u procesu pranja i sušenja prahova pokazao se kao dobar metod zaštite praha od oksidacije.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Electrodeposition of Fe powder from acid electrolytes, Elektrohemijsko taloženje Fe prahova iz kiselih elektrolita",
volume = "73",
number = "8-9",
pages = "861-870",
doi = "10.2298/JSC0809861M"
}

Maksimović, V. M., Pavlović, L., Jović, B. M.,& Pavlović, M.. (2008). Electrodeposition of Fe powder from acid electrolytes. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 73(8-9), 861-870.
https://doi.org/10.2298/JSC0809861M

Maksimović VM, Pavlović L, Jović BM, Pavlović M. Electrodeposition of Fe powder from acid electrolytes. in Journal of the Serbian Chemical Society. 2008;73(8-9):861-870.
doi:10.2298/JSC0809861M .

Maksimović, Vesna M., Pavlović, Ljubica, Jović, Borka M., Pavlović, Miomir, "Electrodeposition of Fe powder from acid electrolytes" in Journal of the Serbian Chemical Society, 73, no. 8-9 (2008):861-870,
https://doi.org/10.2298/JSC0809861M . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Pavlović, Ljubica
AU  - Branković, Goran
AU  - Pavlović, Miomir
AU  - Popov, Konstantin I.
PY  - 2008
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/378
AB  - The ionic equilibrium of the species in the CuSO4-H2SO4-H2O system was employed to systematize the conditions of copper electrodeposition leading to the formation of the honeycomb-like structure. The reason why CuSO4 concentrations higher than 0.15 M are unsuitable for the formation of honeycomb-like structures is shown. The range of H2SO4 concentrations enabling the formation of this type of structure was also determined. The conditions leading to the formation of the honeycomb-like structures are: electrodeposition from solutions with lower concentrations of Cu(II) ions (0.15 M CuSO4 and less) in a concentration range from 0.25 to 1.0 M H2SO4, at a temperature of 18.0±1.0°C and at overpotentials outside the plateau of the limiting diffusion current density at which hydrogen evolution is vigorous enough to change the hydrodynamic conditions in the near-electrode layer. .
AB  - Analizirana je jonska ravnoteža u sistemu CuSO4-H2SO4-H2O da bi se sistematizovali uslovi elektrohemijskog taloženja bakra koji dovode do formiranja strukture pčelinjeg saća. Pokazano je da su koncentracije CuSO4 veće od 0,15 M nepogodne za formiranje strukture pčelinjeg saća. Određen je i opseg koncentracija H2SO4 u kojem se formira ovakva struktura. Uslovi koji dovode do formiranja strukture pčelinjeg saća su: elektro- hemijsko taloženje iz rastvora sa koncentracijom Cu(II) od najviše 0,15 M i opsegom koncentracija H2SO4 od 0,25 do 1,0 M, temperature od 18,0±1,0°C, i na prenapetostima pozitivnijim od onih koji odgovaraju platou granične difuzione gustine struje, na kojima je izdvajanje vodonika dovoljno intenzivno da promeni hidrodinamičke uslove u prikatodnom sloju. .
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition
T1  - Jonska ravnoteža u sistemu CuSO4-H2SO4-H2O i formiranje strukture pčelinjeg saća elektrohemijskim taloženjem bakra
VL  - 73
IS  - 7
SP  - 753
EP  - 760
DO  - 10.2298/JSC0807753N
ER  - 

@article{
author = "Nikolić, Nebojša D. and Pavlović, Ljubica and Branković, Goran and Pavlović, Miomir and Popov, Konstantin I.",
year = "2008",
abstract = "The ionic equilibrium of the species in the CuSO4-H2SO4-H2O system was employed to systematize the conditions of copper electrodeposition leading to the formation of the honeycomb-like structure. The reason why CuSO4 concentrations higher than 0.15 M are unsuitable for the formation of honeycomb-like structures is shown. The range of H2SO4 concentrations enabling the formation of this type of structure was also determined. The conditions leading to the formation of the honeycomb-like structures are: electrodeposition from solutions with lower concentrations of Cu(II) ions (0.15 M CuSO4 and less) in a concentration range from 0.25 to 1.0 M H2SO4, at a temperature of 18.0±1.0°C and at overpotentials outside the plateau of the limiting diffusion current density at which hydrogen evolution is vigorous enough to change the hydrodynamic conditions in the near-electrode layer. ., Analizirana je jonska ravnoteža u sistemu CuSO4-H2SO4-H2O da bi se sistematizovali uslovi elektrohemijskog taloženja bakra koji dovode do formiranja strukture pčelinjeg saća. Pokazano je da su koncentracije CuSO4 veće od 0,15 M nepogodne za formiranje strukture pčelinjeg saća. Određen je i opseg koncentracija H2SO4 u kojem se formira ovakva struktura. Uslovi koji dovode do formiranja strukture pčelinjeg saća su: elektro- hemijsko taloženje iz rastvora sa koncentracijom Cu(II) od najviše 0,15 M i opsegom koncentracija H2SO4 od 0,25 do 1,0 M, temperature od 18,0±1,0°C, i na prenapetostima pozitivnijim od onih koji odgovaraju platou granične difuzione gustine struje, na kojima je izdvajanje vodonika dovoljno intenzivno da promeni hidrodinamičke uslove u prikatodnom sloju. .",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition, Jonska ravnoteža u sistemu CuSO4-H2SO4-H2O i formiranje strukture pčelinjeg saća elektrohemijskim taloženjem bakra",
volume = "73",
number = "7",
pages = "753-760",
doi = "10.2298/JSC0807753N"
}

Nikolić, N. D., Pavlović, L., Branković, G., Pavlović, M.,& Popov, K. I.. (2008). The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 73(7), 753-760.
https://doi.org/10.2298/JSC0807753N

Nikolić ND, Pavlović L, Branković G, Pavlović M, Popov KI. The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition. in Journal of the Serbian Chemical Society. 2008;73(7):753-760.
doi:10.2298/JSC0807753N .

Nikolić, Nebojša D., Pavlović, Ljubica, Branković, Goran, Pavlović, Miomir, Popov, Konstantin I., "The ionic equilibrium in the CuSO4-H2SO4-H2O system and the formation of the honeycomb-like structure during copper electrodeposition" in Journal of the Serbian Chemical Society, 73, no. 7 (2008):753-760,
https://doi.org/10.2298/JSC0807753N . .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Pavlović, Ljubica
AU  - Pavlović, Miomir
AU  - Popov, Konstantin I.
PY  - 2007
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4113
AB  - Copper electrodeposition from acid sulfate solutions at an overpotential of 1000 mV, which is about 250 mV outside the plateau of the limiting diffusion current density, was examined by the determination of the average current efficiency of hydrogen evolution and by the scanning electron microscopic (SEM) analysis of the morphology of the formed copper deposits. Craters or holes formed due to the attachment hydrogen bubbles were the dominant morphological forms of copper deposits obtained at this overpotential. In dependence of the concentration of Cu (II) ions in the plating solution, the two types of holes or craters were formed. One type of holes is obtained by electrodeposition from a solution with a concentration of Cu (II) ions of 0.075 M CuSO4 in 0.50 M H2SO4, and a honeycomb-like structure was formed from these holes. The other types of holes are formed from a solution with a higher concentration of Cu (II) ions (0.60 M CuSO4 in 0.50 M H2SO4) and the formed holes were dish-like. A mixture of both types of holes was obtained by electrodeposition from 0.30 M CuSO4 in 0.50 M H2SO4. The obtained morphologies of copper deposits are discussed in terms of the effect of hydrogen evolution on the hydrodynamic conditions in the plating solution.
PB  - Elsevier
T2  - Electrochimica Acta
T1  - Formation of dish-like holes and a channel structure in electrodeposition of copper under hydrogen co-deposition
VL  - 52
IS  - 28
SP  - 8096
EP  - 8104
DO  - 10.1016/j.electacta.2007.07.008
ER  - 

@article{
author = "Nikolić, Nebojša D. and Pavlović, Ljubica and Pavlović, Miomir and Popov, Konstantin I.",
year = "2007",
abstract = "Copper electrodeposition from acid sulfate solutions at an overpotential of 1000 mV, which is about 250 mV outside the plateau of the limiting diffusion current density, was examined by the determination of the average current efficiency of hydrogen evolution and by the scanning electron microscopic (SEM) analysis of the morphology of the formed copper deposits. Craters or holes formed due to the attachment hydrogen bubbles were the dominant morphological forms of copper deposits obtained at this overpotential. In dependence of the concentration of Cu (II) ions in the plating solution, the two types of holes or craters were formed. One type of holes is obtained by electrodeposition from a solution with a concentration of Cu (II) ions of 0.075 M CuSO4 in 0.50 M H2SO4, and a honeycomb-like structure was formed from these holes. The other types of holes are formed from a solution with a higher concentration of Cu (II) ions (0.60 M CuSO4 in 0.50 M H2SO4) and the formed holes were dish-like. A mixture of both types of holes was obtained by electrodeposition from 0.30 M CuSO4 in 0.50 M H2SO4. The obtained morphologies of copper deposits are discussed in terms of the effect of hydrogen evolution on the hydrodynamic conditions in the plating solution.",
publisher = "Elsevier",
journal = "Electrochimica Acta",
title = "Formation of dish-like holes and a channel structure in electrodeposition of copper under hydrogen co-deposition",
volume = "52",
number = "28",
pages = "8096-8104",
doi = "10.1016/j.electacta.2007.07.008"
}

Nikolić, N. D., Pavlović, L., Pavlović, M.,& Popov, K. I.. (2007). Formation of dish-like holes and a channel structure in electrodeposition of copper under hydrogen co-deposition. in Electrochimica Acta
Elsevier., 52(28), 8096-8104.
https://doi.org/10.1016/j.electacta.2007.07.008

Nikolić ND, Pavlović L, Pavlović M, Popov KI. Formation of dish-like holes and a channel structure in electrodeposition of copper under hydrogen co-deposition. in Electrochimica Acta. 2007;52(28):8096-8104.
doi:10.1016/j.electacta.2007.07.008 .

Nikolić, Nebojša D., Pavlović, Ljubica, Pavlović, Miomir, Popov, Konstantin I., "Formation of dish-like holes and a channel structure in electrodeposition of copper under hydrogen co-deposition" in Electrochimica Acta, 52, no. 28 (2007):8096-8104,
https://doi.org/10.1016/j.electacta.2007.07.008 . .

TY  - JOUR
AU  - Arsenović, Božidarka
AU  - Pavlović, Ljubica
AU  - Tomić, Milorad V.
AU  - Nikolić, Nebojša D.
AU  - Pavlović, Miomir
PY  - 2007
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/317
AB  - Mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal. The samples of steel and copper are processed by electrochemical polisher in corresponding electrolytes for electrochemical polishing. On previously mechanically, and further electrochemically polished samples surface roughness and surface reflection were measured. The effect of decreasing surface roughness of electrochemically polished samples was shown compared to only mechanical polished samples. Following the changes in the relation of the mirror, the total and the diffuse reflection, it is confirmed that it came to significant increase of brightness of the surface polished by electrochemical method, compared to initial surface, both for steel samples and for copper samples.
AB  - Ogledalski sjaj metalnih površina se može povezati sa visokim stepenom ogledalske refleksije koji se približava idealnoj refleksivnosti istog metala. Uzorci čelika i bakra su podvrgnuti elektrohemijskom glačanju u odgovarajućim elektrolitima za elektrohemijsko glačanje. Na prethodno mehanički, a zatim elektrohemijskim glačanim uzorcima merena je hrapavost površine i refleksija svetlosti. Pokazan je uticaj smanjenja površinske hrapavosti elektrohemijski glačanih uzoraka u odnosu na samo mehanički glačane uzorke. Prateći promene odnosa ogledalske, ukupne i difuzne refleksije potvrđeno je da je došlo do značajnog povećanja sjaja površine glačane elektrohemijskim putem u odnosu na polaznu površinu, kako za uzorke čelika tako i za uzorke bakra.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The effect of metal surface condition on brightness and structure of metal coatings. PART I, Surface reflection of the light
T1  - Uticaj stanja površine metala na sjaj i strukturu metalnih prevlaka. I deo, Površinska refleksija svetlosti
VL  - 48
IS  - 4
SP  - 13
EP  - 18
UR  - https://hdl.handle.net/21.15107/rcub_cer_317
ER  - 

@article{
author = "Arsenović, Božidarka and Pavlović, Ljubica and Tomić, Milorad V. and Nikolić, Nebojša D. and Pavlović, Miomir",
year = "2007",
abstract = "Mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal. The samples of steel and copper are processed by electrochemical polisher in corresponding electrolytes for electrochemical polishing. On previously mechanically, and further electrochemically polished samples surface roughness and surface reflection were measured. The effect of decreasing surface roughness of electrochemically polished samples was shown compared to only mechanical polished samples. Following the changes in the relation of the mirror, the total and the diffuse reflection, it is confirmed that it came to significant increase of brightness of the surface polished by electrochemical method, compared to initial surface, both for steel samples and for copper samples., Ogledalski sjaj metalnih površina se može povezati sa visokim stepenom ogledalske refleksije koji se približava idealnoj refleksivnosti istog metala. Uzorci čelika i bakra su podvrgnuti elektrohemijskom glačanju u odgovarajućim elektrolitima za elektrohemijsko glačanje. Na prethodno mehanički, a zatim elektrohemijskim glačanim uzorcima merena je hrapavost površine i refleksija svetlosti. Pokazan je uticaj smanjenja površinske hrapavosti elektrohemijski glačanih uzoraka u odnosu na samo mehanički glačane uzorke. Prateći promene odnosa ogledalske, ukupne i difuzne refleksije potvrđeno je da je došlo do značajnog povećanja sjaja površine glačane elektrohemijskim putem u odnosu na polaznu površinu, kako za uzorke čelika tako i za uzorke bakra.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The effect of metal surface condition on brightness and structure of metal coatings. PART I, Surface reflection of the light, Uticaj stanja površine metala na sjaj i strukturu metalnih prevlaka. I deo, Površinska refleksija svetlosti",
volume = "48",
number = "4",
pages = "13-18",
url = "https://hdl.handle.net/21.15107/rcub_cer_317"
}

Arsenović, B., Pavlović, L., Tomić, M. V., Nikolić, N. D.,& Pavlović, M.. (2007). The effect of metal surface condition on brightness and structure of metal coatings. PART I, Surface reflection of the light. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 48(4), 13-18.
https://hdl.handle.net/21.15107/rcub_cer_317

Arsenović B, Pavlović L, Tomić MV, Nikolić ND, Pavlović M. The effect of metal surface condition on brightness and structure of metal coatings. PART I, Surface reflection of the light. in Zaštita materijala. 2007;48(4):13-18.
https://hdl.handle.net/21.15107/rcub_cer_317 .

Arsenović, Božidarka, Pavlović, Ljubica, Tomić, Milorad V., Nikolić, Nebojša D., Pavlović, Miomir, "The effect of metal surface condition on brightness and structure of metal coatings. PART I, Surface reflection of the light" in Zaštita materijala, 48, no. 4 (2007):13-18,
https://hdl.handle.net/21.15107/rcub_cer_317 .

TY  - JOUR
AU  - Pavlović, Ljubica
AU  - Pavlović, Miroslav M.
AU  - Arsenović, Božidarka
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Pavlović, Miomir
PY  - 2007
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/316
AB  - The properties which determine whether the metal surface is mirror bright are precisely determined by STM investigations. Mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal. Mirror brightness of the copper coatings and the copper surfaces polished both mechanically and electrochemically was determined by flat and mutually parallel parts of the surface which are smooth on the atomic level and which point out towards layer structure of these surfaces. Mirror bright metal surfaces can be obtained only by electrochemical polishing or electrochemical deposition in the presence of brightening addition agents. It was shown that mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal, with the small degree of diffuse reflection.
AB  - Osobine koje određuju da li je metalna površina ogledalski sjajna ili ne su precizno određene AFM i STM ispitivanjima. Ogledalski sjaj metalnih površina se može povezati sa visokim stepenom ogledalske refleksije koji se približava idealnoj refleksivnosti istog metala. Ogledalski sjaj prevlaka bakra i površina bakra glačanih i mehanički i elektrohemijski je određen ravnim i međusobno paralelenim, atomski glatkim delovima površine koji ukazuju na njihovu slojevitu strukturu. Ogledalski sjajne metalne površine mogu da se dobiju jedino elektrohemijskim glačanjem ili elektrohemijskim taloženjem u prisustvu dodataka za sjaj. Pokazano je da se ogledalski sjaj metalnih površina može povezati sa visokim stepenom ogledalske refleksije svetlosti koji se približava idealnoj refleksivnosti istog metala, uz što manji stepen difuzne refleksije.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs
T1  - Uticaj stanja površine metala na sjaj i strukturu metalnih prevlaka. II deo, Morfologija i struktura elektrohemijski istaloženih prevlaka metala
VL  - 48
IS  - 4
SP  - 19
EP  - 31
UR  - https://hdl.handle.net/21.15107/rcub_cer_316
ER  - 

@article{
author = "Pavlović, Ljubica and Pavlović, Miroslav M. and Arsenović, Božidarka and Nikolić, Nebojša D. and Popov, Konstantin I. and Pavlović, Miomir",
year = "2007",
abstract = "The properties which determine whether the metal surface is mirror bright are precisely determined by STM investigations. Mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal. Mirror brightness of the copper coatings and the copper surfaces polished both mechanically and electrochemically was determined by flat and mutually parallel parts of the surface which are smooth on the atomic level and which point out towards layer structure of these surfaces. Mirror bright metal surfaces can be obtained only by electrochemical polishing or electrochemical deposition in the presence of brightening addition agents. It was shown that mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal, with the small degree of diffuse reflection., Osobine koje određuju da li je metalna površina ogledalski sjajna ili ne su precizno određene AFM i STM ispitivanjima. Ogledalski sjaj metalnih površina se može povezati sa visokim stepenom ogledalske refleksije koji se približava idealnoj refleksivnosti istog metala. Ogledalski sjaj prevlaka bakra i površina bakra glačanih i mehanički i elektrohemijski je određen ravnim i međusobno paralelenim, atomski glatkim delovima površine koji ukazuju na njihovu slojevitu strukturu. Ogledalski sjajne metalne površine mogu da se dobiju jedino elektrohemijskim glačanjem ili elektrohemijskim taloženjem u prisustvu dodataka za sjaj. Pokazano je da se ogledalski sjaj metalnih površina može povezati sa visokim stepenom ogledalske refleksije svetlosti koji se približava idealnoj refleksivnosti istog metala, uz što manji stepen difuzne refleksije.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs, Uticaj stanja površine metala na sjaj i strukturu metalnih prevlaka. II deo, Morfologija i struktura elektrohemijski istaloženih prevlaka metala",
volume = "48",
number = "4",
pages = "19-31",
url = "https://hdl.handle.net/21.15107/rcub_cer_316"
}

Pavlović, L., Pavlović, M. M., Arsenović, B., Nikolić, N. D., Popov, K. I.,& Pavlović, M.. (2007). The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 48(4), 19-31.
https://hdl.handle.net/21.15107/rcub_cer_316

Pavlović L, Pavlović MM, Arsenović B, Nikolić ND, Popov KI, Pavlović M. The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs. in Zaštita materijala. 2007;48(4):19-31.
https://hdl.handle.net/21.15107/rcub_cer_316 .

Pavlović, Ljubica, Pavlović, Miroslav M., Arsenović, Božidarka, Nikolić, Nebojša D., Popov, Konstantin I., Pavlović, Miomir, "The effect of metal surface condition on the brightness and the structure of metal coatings. PART II, Morphology and structure of electrodeposited metal coatigs" in Zaštita materijala, 48, no. 4 (2007):19-31,
https://hdl.handle.net/21.15107/rcub_cer_316 .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Pavlović, Ljubica
AU  - Pavlović, Miomir
AU  - Popov, Konstantin I.
PY  - 2007
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/331
AB  - The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency of hydrogen evolution and by scanning electron microscopic (SEM) analysis of the morphology of the formed copper deposits. Increasing the temperature of the solution led to a shift of both the beginning and the end of the plateau of the limiting diffusion current density towards lower electrodeposition overpotentials. Also, higher temperatures led to the formation of morphological forms of copper deposits characteristic for electrodeposition of copper at some higher overpotentials. The unexpected trend in the development of copper structures electrodeposited at an overpotential of 800 mV is discussed in terms of the effect of temperature on the viscosity and surface tension of the electroplating solution.
AB  - Uticaj temperature na elektrohemijsko taloženje bakra na prenapetostima koje pripadaju platoima granične difuzione gustine struje, kao i na višim prenapetostima je ispitan određivanjem srednjeg iskorišćenja struje reakcije izdvajanja vodonika i analizom morfologija taloga bakra tehnikom skenirajuće elektronske mikroskopije. Povećanje temperature rastvora dovelo je do pomeranja i početka i kraja platoa granične difuzione gustine struje ka nižim prenapetostima. Takođe, povećanje temperature dovelo je do formiranja morfoloških formi taloga bakra karakterističnih za elektrohemijsko taloženje na nekim višim prenapetostima. Neočekivani trend u razvoju struktura bakra dobijenih na prenapetosti od 800 mV je bio diskutovan na osnovu uticaja temperature na viskoznost i površinski napon rastvora za elektrohemijsko taloženje bakra.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Effect of temperature on the electrodeposition of disperse copper deposits
T1  - Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra
VL  - 72
IS  - 12
SP  - 1369
EP  - 1381
DO  - 10.2298/JSC0712369N
ER  - 

@article{
author = "Nikolić, Nebojša D. and Pavlović, Ljubica and Pavlović, Miomir and Popov, Konstantin I.",
year = "2007",
abstract = "The effect of temperature on the electrodeposition of copper at overpotentials belonging to the plateau of the limiting diffusion current density and higher was examined by the determination of the average current efficiency of hydrogen evolution and by scanning electron microscopic (SEM) analysis of the morphology of the formed copper deposits. Increasing the temperature of the solution led to a shift of both the beginning and the end of the plateau of the limiting diffusion current density towards lower electrodeposition overpotentials. Also, higher temperatures led to the formation of morphological forms of copper deposits characteristic for electrodeposition of copper at some higher overpotentials. The unexpected trend in the development of copper structures electrodeposited at an overpotential of 800 mV is discussed in terms of the effect of temperature on the viscosity and surface tension of the electroplating solution., Uticaj temperature na elektrohemijsko taloženje bakra na prenapetostima koje pripadaju platoima granične difuzione gustine struje, kao i na višim prenapetostima je ispitan određivanjem srednjeg iskorišćenja struje reakcije izdvajanja vodonika i analizom morfologija taloga bakra tehnikom skenirajuće elektronske mikroskopije. Povećanje temperature rastvora dovelo je do pomeranja i početka i kraja platoa granične difuzione gustine struje ka nižim prenapetostima. Takođe, povećanje temperature dovelo je do formiranja morfoloških formi taloga bakra karakterističnih za elektrohemijsko taloženje na nekim višim prenapetostima. Neočekivani trend u razvoju struktura bakra dobijenih na prenapetosti od 800 mV je bio diskutovan na osnovu uticaja temperature na viskoznost i površinski napon rastvora za elektrohemijsko taloženje bakra.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Effect of temperature on the electrodeposition of disperse copper deposits, Uticaj temperature na elektrohemijsko taloženje disperznih taloga bakra",
volume = "72",
number = "12",
pages = "1369-1381",
doi = "10.2298/JSC0712369N"
}

Nikolić, N. D., Pavlović, L., Pavlović, M.,& Popov, K. I.. (2007). Effect of temperature on the electrodeposition of disperse copper deposits. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 72(12), 1369-1381.
https://doi.org/10.2298/JSC0712369N

Nikolić ND, Pavlović L, Pavlović M, Popov KI. Effect of temperature on the electrodeposition of disperse copper deposits. in Journal of the Serbian Chemical Society. 2007;72(12):1369-1381.
doi:10.2298/JSC0712369N .

Nikolić, Nebojša D., Pavlović, Ljubica, Pavlović, Miomir, Popov, Konstantin I., "Effect of temperature on the electrodeposition of disperse copper deposits" in Journal of the Serbian Chemical Society, 72, no. 12 (2007):1369-1381,
https://doi.org/10.2298/JSC0712369N . .

TY  - JOUR
AU  - Tomić, Milorad V.
AU  - Pavlović, Ljubica
AU  - Maksimović, Vesna M.
AU  - Popov, Konstantin I.
AU  - Nikolić, Nebojša D.
AU  - Pavlović, Miomir
PY  - 2006
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/264
AB  - The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The morphology of electrodeposited copper powder were investigated using a scanning electron microscope (SEM). The effect of the current amplitude cathodic to anodic time ratio and period of the current wave are discussed. It is shown that the parameters determining the reversing current wave determine the micromorfology of the copper powder particles deposited.
AB  - Ispitivan je uticaj različitih režima elektrolize (konstantna i reversna struja) na morfologiju bakarnog praha. Morfologija istaloženog bakarnog praha je proučavana pomoću skening elektronskog mikroskopa (SEM). Diskutovan je efekat katodne i anodne amplitudne gustine struje, odnos katodnog i anodnog vremena kao i vremena katodnog taloženja i anodnog rastvaranja. Pokazano je da parametri koji određuju oblik talasa reversne struje određuju i mikromorfologiju čestica istaloženog bakarnog praha.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The morphology of copper powder obtained by different regimes of electrolysis
T1  - Morfologija bakarnog praha dobijenog različitim režimima elektrolize
VL  - 47
IS  - 3
SP  - 17
EP  - 24
UR  - https://hdl.handle.net/21.15107/rcub_cer_264
ER  - 

@article{
author = "Tomić, Milorad V. and Pavlović, Ljubica and Maksimović, Vesna M. and Popov, Konstantin I. and Nikolić, Nebojša D. and Pavlović, Miomir",
year = "2006",
abstract = "The effect different deposition regimes (constant and reversing currents), on the powdered copper electrodeposits morphology were investigated. The morphology of electrodeposited copper powder were investigated using a scanning electron microscope (SEM). The effect of the current amplitude cathodic to anodic time ratio and period of the current wave are discussed. It is shown that the parameters determining the reversing current wave determine the micromorfology of the copper powder particles deposited., Ispitivan je uticaj različitih režima elektrolize (konstantna i reversna struja) na morfologiju bakarnog praha. Morfologija istaloženog bakarnog praha je proučavana pomoću skening elektronskog mikroskopa (SEM). Diskutovan je efekat katodne i anodne amplitudne gustine struje, odnos katodnog i anodnog vremena kao i vremena katodnog taloženja i anodnog rastvaranja. Pokazano je da parametri koji određuju oblik talasa reversne struje određuju i mikromorfologiju čestica istaloženog bakarnog praha.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The morphology of copper powder obtained by different regimes of electrolysis, Morfologija bakarnog praha dobijenog različitim režimima elektrolize",
volume = "47",
number = "3",
pages = "17-24",
url = "https://hdl.handle.net/21.15107/rcub_cer_264"
}

Tomić, M. V., Pavlović, L., Maksimović, V. M., Popov, K. I., Nikolić, N. D.,& Pavlović, M.. (2006). The morphology of copper powder obtained by different regimes of electrolysis. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 47(3), 17-24.
https://hdl.handle.net/21.15107/rcub_cer_264

Tomić MV, Pavlović L, Maksimović VM, Popov KI, Nikolić ND, Pavlović M. The morphology of copper powder obtained by different regimes of electrolysis. in Zaštita materijala. 2006;47(3):17-24.
https://hdl.handle.net/21.15107/rcub_cer_264 .

Tomić, Milorad V., Pavlović, Ljubica, Maksimović, Vesna M., Popov, Konstantin I., Nikolić, Nebojša D., Pavlović, Miomir, "The morphology of copper powder obtained by different regimes of electrolysis" in Zaštita materijala, 47, no. 3 (2006):17-24,
https://hdl.handle.net/21.15107/rcub_cer_264 .

TY  - JOUR
AU  - Nikolić, Nebojša D.
AU  - Popov, Konstantin I.
AU  - Pavlović, Ljubica J.
AU  - Pavlović, Miomir
PY  - 2006
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4079
AB  - Morphologies of copper deposits obtained at overpotentials belonging to the plateau of the limiting diffusion current density and at higher
overpotentials were examined by the scanning electron microscopy (SEM) technique. Copper dendrites are formed at overpotentials belonging to
the plateau of the limiting diffusion current density. The shape of copper dendrites depends on the electrodeposition overpotential. At higher
overpotentials (800 and 1000 mV) and larger values of current densities, porous and very disperse copper deposits were obtained. These
morphologies were a consequence of a very vigorous hydrogen evolution at these electrodeposition overpotentials. Also, the obtained copper
structures consisted of agglomerates of copper grains. The size of copper grains is a function of the overpotential of electrodeposition, thus
approaching to nano-sized dimensions is achieved when the electrodeposition overpotential is increased.
PB  - Elsevier
T2  - Surface and Coatings Technology
T1  - Morphologies of copper deposits obtained by the electrodeposition at high overpotentials
VL  - 201
IS  - 3-4
SP  - 560
EP  - 566
DO  - 10.1016/j.surfcoat.2005.12.004
ER  - 

@article{
author = "Nikolić, Nebojša D. and Popov, Konstantin I. and Pavlović, Ljubica J. and Pavlović, Miomir",
year = "2006",
abstract = "Morphologies of copper deposits obtained at overpotentials belonging to the plateau of the limiting diffusion current density and at higher
overpotentials were examined by the scanning electron microscopy (SEM) technique. Copper dendrites are formed at overpotentials belonging to
the plateau of the limiting diffusion current density. The shape of copper dendrites depends on the electrodeposition overpotential. At higher
overpotentials (800 and 1000 mV) and larger values of current densities, porous and very disperse copper deposits were obtained. These
morphologies were a consequence of a very vigorous hydrogen evolution at these electrodeposition overpotentials. Also, the obtained copper
structures consisted of agglomerates of copper grains. The size of copper grains is a function of the overpotential of electrodeposition, thus
approaching to nano-sized dimensions is achieved when the electrodeposition overpotential is increased.",
publisher = "Elsevier",
journal = "Surface and Coatings Technology",
title = "Morphologies of copper deposits obtained by the electrodeposition at high overpotentials",
volume = "201",
number = "3-4",
pages = "560-566",
doi = "10.1016/j.surfcoat.2005.12.004"
}

Nikolić, N. D., Popov, K. I., Pavlović, L. J.,& Pavlović, M.. (2006). Morphologies of copper deposits obtained by the electrodeposition at high overpotentials. in Surface and Coatings Technology
Elsevier., 201(3-4), 560-566.
https://doi.org/10.1016/j.surfcoat.2005.12.004

Nikolić ND, Popov KI, Pavlović LJ, Pavlović M. Morphologies of copper deposits obtained by the electrodeposition at high overpotentials. in Surface and Coatings Technology. 2006;201(3-4):560-566.
doi:10.1016/j.surfcoat.2005.12.004 .

Nikolić, Nebojša D., Popov, Konstantin I., Pavlović, Ljubica J., Pavlović, Miomir, "Morphologies of copper deposits obtained by the electrodeposition at high overpotentials" in Surface and Coatings Technology, 201, no. 3-4 (2006):560-566,
https://doi.org/10.1016/j.surfcoat.2005.12.004 . .

TY  - JOUR
AU  - Tomić, Milorad V.
AU  - Pavlović, Ljubica
AU  - Pavlović, Miomir
AU  - Stanojević, Dušan
AU  - Gligorić, Miladin
PY  - 2006
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/266
AB  - In this paper the surface roughness of silver coatings electrodeposited as final coatings onto aluminum was analyzed. The copper coating was electrodeposited as a basic coating directly onto aluminum. Afterward, nickel and copper coatings from acidic bath were deposited. Silver was electrodeposited on the acidic bath copper coating. Also the influence of fluorides in the solution for direct electro deposition of basic copper coatings on the structure of the final silver coating was investigated. The surface roughness was measured with device TR 200. Silver coatings can be successfully electrodeposited as a final coating onto aluminum with nickel and copper inter coatings.
AB  - U radu je analizirana površinska hrapavost elektrohemijski istaloženih prevlaka srebra, kao završnih prevlaka na aluminijumu. Bakarna prevlaka taložena je galvanostatski neposredno na aluminijum kao osnovna prevlaka. Nakon toga je taložena prevlake nikla i kao završna prevlaka taložena je prevlaka srebra. U radu je takođe ispitivan uticaj prisustva fluorida u elektrolitu za direktno elektrohemijsko taloženje prevlaka bakra na strukturu završne prevlake srebra. Površinska hrapavost je merena uređajem TR 200. Pokazano je da se prevlaka srebra može uspešno neposredno elektrohemijski nanositi na aluminijum kao završna prevlaka, uz prethodnu hemijsku pripremu površine i taloženjem međuprevlaka bakra i nikla.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The roughness of silver coatings electrodeposited onto aluminium
T1  - Hrapavost prevlaka srebra taloženih galvanostatskim putem na aluminijum
VL  - 47
IS  - 4
SP  - 23
EP  - 28
UR  - https://hdl.handle.net/21.15107/rcub_cer_266
ER  - 

@article{
author = "Tomić, Milorad V. and Pavlović, Ljubica and Pavlović, Miomir and Stanojević, Dušan and Gligorić, Miladin",
year = "2006",
abstract = "In this paper the surface roughness of silver coatings electrodeposited as final coatings onto aluminum was analyzed. The copper coating was electrodeposited as a basic coating directly onto aluminum. Afterward, nickel and copper coatings from acidic bath were deposited. Silver was electrodeposited on the acidic bath copper coating. Also the influence of fluorides in the solution for direct electro deposition of basic copper coatings on the structure of the final silver coating was investigated. The surface roughness was measured with device TR 200. Silver coatings can be successfully electrodeposited as a final coating onto aluminum with nickel and copper inter coatings., U radu je analizirana površinska hrapavost elektrohemijski istaloženih prevlaka srebra, kao završnih prevlaka na aluminijumu. Bakarna prevlaka taložena je galvanostatski neposredno na aluminijum kao osnovna prevlaka. Nakon toga je taložena prevlake nikla i kao završna prevlaka taložena je prevlaka srebra. U radu je takođe ispitivan uticaj prisustva fluorida u elektrolitu za direktno elektrohemijsko taloženje prevlaka bakra na strukturu završne prevlake srebra. Površinska hrapavost je merena uređajem TR 200. Pokazano je da se prevlaka srebra može uspešno neposredno elektrohemijski nanositi na aluminijum kao završna prevlaka, uz prethodnu hemijsku pripremu površine i taloženjem međuprevlaka bakra i nikla.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The roughness of silver coatings electrodeposited onto aluminium, Hrapavost prevlaka srebra taloženih galvanostatskim putem na aluminijum",
volume = "47",
number = "4",
pages = "23-28",
url = "https://hdl.handle.net/21.15107/rcub_cer_266"
}

Tomić, M. V., Pavlović, L., Pavlović, M., Stanojević, D.,& Gligorić, M.. (2006). The roughness of silver coatings electrodeposited onto aluminium. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 47(4), 23-28.
https://hdl.handle.net/21.15107/rcub_cer_266

Tomić MV, Pavlović L, Pavlović M, Stanojević D, Gligorić M. The roughness of silver coatings electrodeposited onto aluminium. in Zaštita materijala. 2006;47(4):23-28.
https://hdl.handle.net/21.15107/rcub_cer_266 .

Tomić, Milorad V., Pavlović, Ljubica, Pavlović, Miomir, Stanojević, Dušan, Gligorić, Miladin, "The roughness of silver coatings electrodeposited onto aluminium" in Zaštita materijala, 47, no. 4 (2006):23-28,
https://hdl.handle.net/21.15107/rcub_cer_266 .

TY  - JOUR
AU  - Tomić, Milorad V.
AU  - Pavlović, Ljubica
AU  - Pavlović, Miomir
PY  - 2006
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/269
AB  - The copper coatings were electrodeposited directly onto aluminium from the bath: (CuSO4 (55 g/dm3) + CH2 NH2 - CH2OH (100g/ dm3) + (NH4)2SO4 (30 g/dm3) + Na2SO4(10H2O (75g/dm3) + Na2CO3 (3g/dm3), room temperature, j = 0.3 - 0.8 A/dm2, pH = 10.3-8.5. The copper coatings deposited onto Al show good adhesion. Removal of passive oxide film from aluminium surface was chemically accomplished in solutions 1-4. The effect of current density, deposition time and electrolytic pH on roughness of copper coatings were studied. Roughness of Cu coatings was measured by TR200.
AB  - Prevlake bakra taložene su neposredno galvanostatskim putem na aluminijum iz kupatila sastava: [CuSO4 (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) + (NH4)2SO4 (30 g/ dm3) + Na2SO4(10H2O (75 g/dm3) + Na2CO3 (3 g/dm3], temperatura sobna j =0,3-0,8A/dm2, pH = 10,3-8.5. Istaložene prevlake bakra na aluminijumu imaju dobru adheziju. Uklanjanje pasivne oksidne opne sa površine aluminijuma vršeno je hemijski u rastvorima 1-4. Ispitivan je uticaj gustine struje vremena taloženja i pH-vrednosti elektrolita na hrapavost prevlaka bakra. Merenje hrapavosti prevlaka bakra vršeno je pomoću uređaja TR200.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The effect of current density, deoisition time and electrolytic pH value on roughness of copper coatings
T1  - Uticaj gustine struje, vremena taloženja i pH – vrednosti elektrolita na hrapavost prevlaka bakra
VL  - 47
IS  - 2
SP  - 11
EP  - 16
UR  - https://hdl.handle.net/21.15107/rcub_cer_269
ER  - 

@article{
author = "Tomić, Milorad V. and Pavlović, Ljubica and Pavlović, Miomir",
year = "2006",
abstract = "The copper coatings were electrodeposited directly onto aluminium from the bath: (CuSO4 (55 g/dm3) + CH2 NH2 - CH2OH (100g/ dm3) + (NH4)2SO4 (30 g/dm3) + Na2SO4(10H2O (75g/dm3) + Na2CO3 (3g/dm3), room temperature, j = 0.3 - 0.8 A/dm2, pH = 10.3-8.5. The copper coatings deposited onto Al show good adhesion. Removal of passive oxide film from aluminium surface was chemically accomplished in solutions 1-4. The effect of current density, deposition time and electrolytic pH on roughness of copper coatings were studied. Roughness of Cu coatings was measured by TR200., Prevlake bakra taložene su neposredno galvanostatskim putem na aluminijum iz kupatila sastava: [CuSO4 (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) + (NH4)2SO4 (30 g/ dm3) + Na2SO4(10H2O (75 g/dm3) + Na2CO3 (3 g/dm3], temperatura sobna j =0,3-0,8A/dm2, pH = 10,3-8.5. Istaložene prevlake bakra na aluminijumu imaju dobru adheziju. Uklanjanje pasivne oksidne opne sa površine aluminijuma vršeno je hemijski u rastvorima 1-4. Ispitivan je uticaj gustine struje vremena taloženja i pH-vrednosti elektrolita na hrapavost prevlaka bakra. Merenje hrapavosti prevlaka bakra vršeno je pomoću uređaja TR200.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The effect of current density, deoisition time and electrolytic pH value on roughness of copper coatings, Uticaj gustine struje, vremena taloženja i pH – vrednosti elektrolita na hrapavost prevlaka bakra",
volume = "47",
number = "2",
pages = "11-16",
url = "https://hdl.handle.net/21.15107/rcub_cer_269"
}

Tomić, M. V., Pavlović, L.,& Pavlović, M.. (2006). The effect of current density, deoisition time and electrolytic pH value on roughness of copper coatings. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 47(2), 11-16.
https://hdl.handle.net/21.15107/rcub_cer_269

Tomić MV, Pavlović L, Pavlović M. The effect of current density, deoisition time and electrolytic pH value on roughness of copper coatings. in Zaštita materijala. 2006;47(2):11-16.
https://hdl.handle.net/21.15107/rcub_cer_269 .

Tomić, Milorad V., Pavlović, Ljubica, Pavlović, Miomir, "The effect of current density, deoisition time and electrolytic pH value on roughness of copper coatings" in Zaštita materijala, 47, no. 2 (2006):11-16,
https://hdl.handle.net/21.15107/rcub_cer_269 .

TY  - JOUR
AU  - Pavlović, Miomir
AU  - Tomić, Milorad V.
AU  - Pavlović, Ljubica
PY  - 2005
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/197
AB  - In this paper the structural characteristics of silver coatings electrodeposited as final coatings onto aluminum were shown. The copper coating was electrodeposited as a basic coating directly onto aluminum. Afterward, nickel and copper coatings from acidic bath were deposited. Silver was electrodeposited on the acidic bath copper coating. Also the influence of fluorides in the solution for direct electrodepositing of basic copper coating on the structure of the final silver coatings was investigated. Structural characteristics of basic copper coatings and final silver coatings were examined with scanning electron microscopy (SEM). Silver coatings can be successfully electrodeposited as a final coating onto aluminum with nickel and copper inter coatings.
AB  - U ovom radu su prikazani morfologija i strukturne karakteristike elektrohemijski istaloženih prevlaka srebra, kao završnih prevlaka, na aluminiju i njegovim legurama. Bakarna prevlaka je elektrohemijski taložena neposredno na aluminijum kao osnovna prevlaka. Nakon toga, prevlaka nikla i prevlaka bakra iz kiselog kupatila je takođe elektrohemijski taložena. Na ovaj sistem prevlaka taložena je prevlaka srebra. U radu je takođe je ispitivan uticaj fluorida и elektrolitu za direktno taloženje prevlaka bakra na strukturu završne prevlake srebra. Morfologija i strukturne karakteristike istaloženih prevlaka su ispitivane skenirajućom elektronskom mikroskopijom (SEM). Pokazano je da se srebrne prevlake mogu uspešno nanositi kao završne prevlake na aluminijum i njegove legure sa međuprevlakama bakra i nikla.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - Electroplating of silver onto aluminum and its alloys
T1  - Elektrohemijsko taloženje prevlaka srebra na aluminijum i njegove legure
VL  - 46
IS  - 2
SP  - 23
EP  - 27
UR  - https://hdl.handle.net/21.15107/rcub_cer_197
ER  - 

@article{
author = "Pavlović, Miomir and Tomić, Milorad V. and Pavlović, Ljubica",
year = "2005",
abstract = "In this paper the structural characteristics of silver coatings electrodeposited as final coatings onto aluminum were shown. The copper coating was electrodeposited as a basic coating directly onto aluminum. Afterward, nickel and copper coatings from acidic bath were deposited. Silver was electrodeposited on the acidic bath copper coating. Also the influence of fluorides in the solution for direct electrodepositing of basic copper coating on the structure of the final silver coatings was investigated. Structural characteristics of basic copper coatings and final silver coatings were examined with scanning electron microscopy (SEM). Silver coatings can be successfully electrodeposited as a final coating onto aluminum with nickel and copper inter coatings., U ovom radu su prikazani morfologija i strukturne karakteristike elektrohemijski istaloženih prevlaka srebra, kao završnih prevlaka, na aluminiju i njegovim legurama. Bakarna prevlaka je elektrohemijski taložena neposredno na aluminijum kao osnovna prevlaka. Nakon toga, prevlaka nikla i prevlaka bakra iz kiselog kupatila je takođe elektrohemijski taložena. Na ovaj sistem prevlaka taložena je prevlaka srebra. U radu je takođe je ispitivan uticaj fluorida и elektrolitu za direktno taloženje prevlaka bakra na strukturu završne prevlake srebra. Morfologija i strukturne karakteristike istaloženih prevlaka su ispitivane skenirajućom elektronskom mikroskopijom (SEM). Pokazano je da se srebrne prevlake mogu uspešno nanositi kao završne prevlake na aluminijum i njegove legure sa međuprevlakama bakra i nikla.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "Electroplating of silver onto aluminum and its alloys, Elektrohemijsko taloženje prevlaka srebra na aluminijum i njegove legure",
volume = "46",
number = "2",
pages = "23-27",
url = "https://hdl.handle.net/21.15107/rcub_cer_197"
}

Pavlović, M., Tomić, M. V.,& Pavlović, L.. (2005). Electroplating of silver onto aluminum and its alloys. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 46(2), 23-27.
https://hdl.handle.net/21.15107/rcub_cer_197

Pavlović M, Tomić MV, Pavlović L. Electroplating of silver onto aluminum and its alloys. in Zaštita materijala. 2005;46(2):23-27.
https://hdl.handle.net/21.15107/rcub_cer_197 .

Pavlović, Miomir, Tomić, Milorad V., Pavlović, Ljubica, "Electroplating of silver onto aluminum and its alloys" in Zaštita materijala, 46, no. 2 (2005):23-27,
https://hdl.handle.net/21.15107/rcub_cer_197 .

TY  - JOUR
AU  - Tomić, Milorad V.
AU  - Pavlović, Ljubica
AU  - Pavlović, Miomir
PY  - 2005
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/200
AB  - The deposition of copper coatings has been done by direct electrochemical deposition from the solution: CuSO4 (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) + (NH4)2SO4 (30 g/dm3) + Na2SO4*10H2O (75 g/dm3) + Na2CO3 (3 g/dm3), room temperature, j = 0.3 - 0.8 A/dm2, pH = 10.3. The coatings obtained from this electrolyte have very good adhesion if they are followed by quality chemical preparation of the surface. The removal of the oxide film from the aluminum surface has been chemically done in solutions 1 - 4. The influence of current density and deposition time on the structure of copper coatings has been also examined. The morphology and the structural characteristics of copper coatings on aluminum were examined by scanning electron microscopy (SEM).
AB  - Taloženje prevlaka bakra na aluminijumu i njegovim legurama vršeno je neposredno elektrohemijskim putem iz rastvora: CuSO4 (55g/dm3) + CH2 NH2 CH2OH (100g/dm3) + (NH4)2SO4 (30g/dm3) + Na2SO4*10H2O (75g/dm3) + Na2CO3 (3g/dm3), temperatura sobna, gustina struje j = 0.3 A/dm2, pH = 10.3. Prevlake bakra dobijene iz ovog elektrolita, uz kvalitetnu hemijsku pripremu površine, imaju dobru adheziju. Uklanjanje oksidne opne sa površine aluminijuma vršeno je hemijskim putem u rastvorima 1-4. Takođe je ispitivan i uticaj gustine struje i vremena taloženja na strukturu prevlaka bakra. Morfologija i strukturne karakteristike prevlaka bakra na aluminijumu ispitivane su skenirajućim elektronskim mikroskopom (SEM).
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - Direct electroplating of copper coatings onto aluminum
T1  - Neposredno elektrohemijsko taloženje prevlaka bakra na aluminijum
VL  - 46
IS  - 3
SP  - 13
EP  - 16
UR  - https://hdl.handle.net/21.15107/rcub_cer_200
ER  - 

@article{
author = "Tomić, Milorad V. and Pavlović, Ljubica and Pavlović, Miomir",
year = "2005",
abstract = "The deposition of copper coatings has been done by direct electrochemical deposition from the solution: CuSO4 (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) + (NH4)2SO4 (30 g/dm3) + Na2SO4*10H2O (75 g/dm3) + Na2CO3 (3 g/dm3), room temperature, j = 0.3 - 0.8 A/dm2, pH = 10.3. The coatings obtained from this electrolyte have very good adhesion if they are followed by quality chemical preparation of the surface. The removal of the oxide film from the aluminum surface has been chemically done in solutions 1 - 4. The influence of current density and deposition time on the structure of copper coatings has been also examined. The morphology and the structural characteristics of copper coatings on aluminum were examined by scanning electron microscopy (SEM)., Taloženje prevlaka bakra na aluminijumu i njegovim legurama vršeno je neposredno elektrohemijskim putem iz rastvora: CuSO4 (55g/dm3) + CH2 NH2 CH2OH (100g/dm3) + (NH4)2SO4 (30g/dm3) + Na2SO4*10H2O (75g/dm3) + Na2CO3 (3g/dm3), temperatura sobna, gustina struje j = 0.3 A/dm2, pH = 10.3. Prevlake bakra dobijene iz ovog elektrolita, uz kvalitetnu hemijsku pripremu površine, imaju dobru adheziju. Uklanjanje oksidne opne sa površine aluminijuma vršeno je hemijskim putem u rastvorima 1-4. Takođe je ispitivan i uticaj gustine struje i vremena taloženja na strukturu prevlaka bakra. Morfologija i strukturne karakteristike prevlaka bakra na aluminijumu ispitivane su skenirajućim elektronskim mikroskopom (SEM).",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "Direct electroplating of copper coatings onto aluminum, Neposredno elektrohemijsko taloženje prevlaka bakra na aluminijum",
volume = "46",
number = "3",
pages = "13-16",
url = "https://hdl.handle.net/21.15107/rcub_cer_200"
}

Tomić, M. V., Pavlović, L.,& Pavlović, M.. (2005). Direct electroplating of copper coatings onto aluminum. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 46(3), 13-16.
https://hdl.handle.net/21.15107/rcub_cer_200

Tomić MV, Pavlović L, Pavlović M. Direct electroplating of copper coatings onto aluminum. in Zaštita materijala. 2005;46(3):13-16.
https://hdl.handle.net/21.15107/rcub_cer_200 .

Tomić, Milorad V., Pavlović, Ljubica, Pavlović, Miomir, "Direct electroplating of copper coatings onto aluminum" in Zaštita materijala, 46, no. 3 (2005):13-16,
https://hdl.handle.net/21.15107/rcub_cer_200 .

TY  - JOUR
AU  - Tomić, Milorad V.
AU  - Pavlović, Ljubica
AU  - Pavlović, Miomir
PY  - 2005
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/214
AB  - The copper coatings were electrodeposited directly onto aluminum from the following solution: CuSO4-⋅5H2O (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) (NH4)2SO4 (30 g/dm3) + Na2SO4 - 10H2O (75 g/dm3) + Na2CO3 (3g/dm3), room temperature, current density j = 0.6 A/dm2 at pH = 10.3-8.5. It is shown in this paper that by lowering the pH value, the coverage of the base metal is decreasing and the coating is continuing its growth on the already created centers of crystallization. The fluorides in the form of NaF, concentration varying from 0.5 to 3 g/dm3, were added to the electrolyte for copper electrochemical deposition. Increasing the concentration of the fluorides the structure of the copper coating is changing; crystalline grains are larger, the coating is more porous and the coverage of the base metal is smaller, but the growth of the new layers of coating onto already existing centers of crystallization is more intense.
AB  - Prevlake bakra taložene su elektrohemijskim putem neposredno na aluminijum iz elektrolita sastava: CuSO4-5H2O (55g/dm3) + CH2 NH2 - CH2OH (100g/dm3) (NH4)2SO4(30g/dm3) + Na2SO4-10H2O (75g/dm3) + Na2CO3 (3g/dm3), temperatura sobna, gustina struje j = 0,6 A/dm2 i pri pH vrednosti 10.3 - 8.5. U radu je pokazano da sa smanjenjem pH vrednosti ispod 10.3 opada i pokrivenost osnovnog metala i da prevlaka nastavlja rast na već stvorenim centrima kristalizacije. U elektrolit za taloženje prevlaka bakra dodavani si fluoridi u obliku NaF u koncentraciji od 0.5 do 3 g/dm3. Sa povećanjem koncentracije fluorida menja se struktura prevlake bakra; kristalna zrna su krupnija, prevlaka postaje poroznija, pokrivenost osnovnog metala je sve manja, ali je intezivnije narastanje novih slojeva prevlake na već stvorevim centrima kristalizacije.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The effect of the fluorides and pH value of the electrolyte on the structure of copper coatings deposited onto aluminum
T1  - Uticaj fluorida i pH vrednosti elektrolita na strukturu prevlaka bakra istaloženih na aluminijumu
VL  - 46
IS  - 4
SP  - 10
EP  - 13
UR  - https://hdl.handle.net/21.15107/rcub_cer_214
ER  - 

@article{
author = "Tomić, Milorad V. and Pavlović, Ljubica and Pavlović, Miomir",
year = "2005",
abstract = "The copper coatings were electrodeposited directly onto aluminum from the following solution: CuSO4-⋅5H2O (55 g/dm3) + CH2 NH2 - CH2OH (100 g/dm3) (NH4)2SO4 (30 g/dm3) + Na2SO4 - 10H2O (75 g/dm3) + Na2CO3 (3g/dm3), room temperature, current density j = 0.6 A/dm2 at pH = 10.3-8.5. It is shown in this paper that by lowering the pH value, the coverage of the base metal is decreasing and the coating is continuing its growth on the already created centers of crystallization. The fluorides in the form of NaF, concentration varying from 0.5 to 3 g/dm3, were added to the electrolyte for copper electrochemical deposition. Increasing the concentration of the fluorides the structure of the copper coating is changing; crystalline grains are larger, the coating is more porous and the coverage of the base metal is smaller, but the growth of the new layers of coating onto already existing centers of crystallization is more intense., Prevlake bakra taložene su elektrohemijskim putem neposredno na aluminijum iz elektrolita sastava: CuSO4-5H2O (55g/dm3) + CH2 NH2 - CH2OH (100g/dm3) (NH4)2SO4(30g/dm3) + Na2SO4-10H2O (75g/dm3) + Na2CO3 (3g/dm3), temperatura sobna, gustina struje j = 0,6 A/dm2 i pri pH vrednosti 10.3 - 8.5. U radu je pokazano da sa smanjenjem pH vrednosti ispod 10.3 opada i pokrivenost osnovnog metala i da prevlaka nastavlja rast na već stvorenim centrima kristalizacije. U elektrolit za taloženje prevlaka bakra dodavani si fluoridi u obliku NaF u koncentraciji od 0.5 do 3 g/dm3. Sa povećanjem koncentracije fluorida menja se struktura prevlake bakra; kristalna zrna su krupnija, prevlaka postaje poroznija, pokrivenost osnovnog metala je sve manja, ali je intezivnije narastanje novih slojeva prevlake na već stvorevim centrima kristalizacije.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The effect of the fluorides and pH value of the electrolyte on the structure of copper coatings deposited onto aluminum, Uticaj fluorida i pH vrednosti elektrolita na strukturu prevlaka bakra istaloženih na aluminijumu",
volume = "46",
number = "4",
pages = "10-13",
url = "https://hdl.handle.net/21.15107/rcub_cer_214"
}

Tomić, M. V., Pavlović, L.,& Pavlović, M.. (2005). The effect of the fluorides and pH value of the electrolyte on the structure of copper coatings deposited onto aluminum. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 46(4), 10-13.
https://hdl.handle.net/21.15107/rcub_cer_214

Tomić MV, Pavlović L, Pavlović M. The effect of the fluorides and pH value of the electrolyte on the structure of copper coatings deposited onto aluminum. in Zaštita materijala. 2005;46(4):10-13.
https://hdl.handle.net/21.15107/rcub_cer_214 .

Tomić, Milorad V., Pavlović, Ljubica, Pavlović, Miomir, "The effect of the fluorides and pH value of the electrolyte on the structure of copper coatings deposited onto aluminum" in Zaštita materijala, 46, no. 4 (2005):10-13,
https://hdl.handle.net/21.15107/rcub_cer_214 .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Maksimović, Vesna M.
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/136
AB  - The structure of powder particleswas analysed by considering their cross sections. It was shown that the structure of powder particles of nonsieved flowing powders is sufficiently dense to produce a continuous surface, which does not allow the particles to jam and hence permits the free flow of nonsieved powder. It was also shown that the representative powder particle the elementary cell of which can be presented by a 3D-cross, describes the properties of the powder relative to its flowability well.
AB  - Analizirana je struktura čestica praha razmatranjem njihovog poprečnog preseka Pokazano je da je struktura čestica nesejanog praha koji teče dovoljno gusta da obrazuje kontinualnu površinu, koja ne dozvoljava zaglavljivanje čestica i samim tim omogućava slobodno tečenje nesejanih prahova. Takođe je pokazano da reprezentativna čestica praha, čija se elementarna ćelija može predstaviti 3D-krstom, dobro opisuje osobine praha koje se odnose na tečljivost.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles
T1  - Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha IV - unutrašnja struktura čestica praha
VL  - 69
IS  - 10
SP  - 817
EP  - 825
DO  - 10.2298/JSC0410817P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Pavlović, Miomir and Pavlović, Ljubica and Maksimović, Vesna M.",
year = "2004",
abstract = "The structure of powder particleswas analysed by considering their cross sections. It was shown that the structure of powder particles of nonsieved flowing powders is sufficiently dense to produce a continuous surface, which does not allow the particles to jam and hence permits the free flow of nonsieved powder. It was also shown that the representative powder particle the elementary cell of which can be presented by a 3D-cross, describes the properties of the powder relative to its flowability well., Analizirana je struktura čestica praha razmatranjem njihovog poprečnog preseka Pokazano je da je struktura čestica nesejanog praha koji teče dovoljno gusta da obrazuje kontinualnu površinu, koja ne dozvoljava zaglavljivanje čestica i samim tim omogućava slobodno tečenje nesejanih prahova. Takođe je pokazano da reprezentativna čestica praha, čija se elementarna ćelija može predstaviti 3D-krstom, dobro opisuje osobine praha koje se odnose na tečljivost.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles, Uticaj oblika i strukture čestica na tečljivost elektrolitičkog bakarnog praha IV - unutrašnja struktura čestica praha",
volume = "69",
number = "10",
pages = "817-825",
doi = "10.2298/JSC0410817P"
}

Popov, K. I., Krstić, S. B., Pavlović, M., Pavlović, L.,& Maksimović, V. M.. (2004). The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 69(10), 817-825.
https://doi.org/10.2298/JSC0410817P

Popov KI, Krstić SB, Pavlović M, Pavlović L, Maksimović VM. The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles. in Journal of the Serbian Chemical Society. 2004;69(10):817-825.
doi:10.2298/JSC0410817P .

Popov, Konstantin I., Krstić, Snežana B., Pavlović, Miomir, Pavlović, Ljubica, Maksimović, Vesna M., "The effect of the particle shape and structure on the flowability of electrolytic copper powder IV: The internal structure of the powder particles" in Journal of the Serbian Chemical Society, 69, no. 10 (2004):817-825,
https://doi.org/10.2298/JSC0410817P . .

TY  - JOUR
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica J.
AU  - Doroslovački, Ivo
AU  - Nikolić, Nebojša D.
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4107
AB  - One of the main concerns in the production of electrolytic copper powder is stabilisation. Nonstabilised powder has a large surface area exposed to the effects of oxygen and moisture from the air. This leads to oxidation and formation of corrosion products on the grain surface and, in this way, the powder becomes unsuitable for sintering. Stabilisation is mostly obtained by interaction between the clean surface of the electrodeposited copper powder and a solution of an active substance, which inhibits the corrosion of copper powders. This work describes the stabilisation of copper powders using a new method. The oxygen content, moisture content, and corrosion resistance of the stabilised electrolytic copper powder were determined. These values are compared with the corresponding values of other corrosion inhibitors of copper powder.
PB  - Elsevier
T2  - Hydrometallurgy
T1  - The effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder
VL  - 73
IS  - 1-2
SP  - 155
EP  - 162
DO  - 10.1016/j.hydromet.2003.08.005
ER  - 

@article{
author = "Pavlović, Miomir and Pavlović, Ljubica J. and Doroslovački, Ivo and Nikolić, Nebojša D.",
year = "2004",
abstract = "One of the main concerns in the production of electrolytic copper powder is stabilisation. Nonstabilised powder has a large surface area exposed to the effects of oxygen and moisture from the air. This leads to oxidation and formation of corrosion products on the grain surface and, in this way, the powder becomes unsuitable for sintering. Stabilisation is mostly obtained by interaction between the clean surface of the electrodeposited copper powder and a solution of an active substance, which inhibits the corrosion of copper powders. This work describes the stabilisation of copper powders using a new method. The oxygen content, moisture content, and corrosion resistance of the stabilised electrolytic copper powder were determined. These values are compared with the corresponding values of other corrosion inhibitors of copper powder.",
publisher = "Elsevier",
journal = "Hydrometallurgy",
title = "The effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder",
volume = "73",
number = "1-2",
pages = "155-162",
doi = "10.1016/j.hydromet.2003.08.005"
}

Pavlović, M., Pavlović, L. J., Doroslovački, I.,& Nikolić, N. D.. (2004). The effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder. in Hydrometallurgy
Elsevier., 73(1-2), 155-162.
https://doi.org/10.1016/j.hydromet.2003.08.005

Pavlović M, Pavlović LJ, Doroslovački I, Nikolić ND. The effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder. in Hydrometallurgy. 2004;73(1-2):155-162.
doi:10.1016/j.hydromet.2003.08.005 .

Pavlović, Miomir, Pavlović, Ljubica J., Doroslovački, Ivo, Nikolić, Nebojša D., "The effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder" in Hydrometallurgy, 73, no. 1-2 (2004):155-162,
https://doi.org/10.1016/j.hydromet.2003.08.005 . .

TY  - JOUR
AU  - Tomić, Milorad V.
AU  - Pavlović, Miomir
AU  - Rakočević, Zlatko Lj.
AU  - Pavlović, Ljubica
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/151
AB  - Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface roughness was measured. The effect of the anode treatment on surface roughness was also investigated. The zinc coating was deposited on chemically and electrochemically treated aluminum samples, and afterwards the surface roughness of these samples was measured. Based on the results it was determined that from all of the solutions for electrochemical polishing, the most efficient solution is the solution number II. Aluminum samples treated with this solution are the least rough. It was determined that chemically deposited zinc coating on previously chemically and electrochemically treated samples leads to significant lowering of surface roughness. The anodic treatment of aluminum surface significantly lowers surface roughness also.
AB  - Uzorci aluminijuma su podvrgavani elektrohemijskom glačanju u jednom od tri rastvora za elektrohemijsko glačanje. Na tako pripremljenim uzorcima merena je površinska hrapavost. Takođe je ispitivan i uticaj anadne obrade na površinsku hrapavost aluminijuma. Na hemijski i elektrohemijski pripremljene uzorke aluminijuma, taložena je prevlaka cinka hemijskim putem, a potom merena površinska hrapavost ovakvih uzoraka. Na osnovu dobijenih rezultata ustanovljeno je da je od ispitivanih rastvora za elektrohemijsko glačanje najefikasniji rastvor II. Uzorci aluminijuma tretirani u ovom rastvoru imaju najmanju hrapavost. Ustanovljeno je da usled taloženja hemijske prevlake cinka na prethodno hemijski i elektrohemijski tretirane uzorke dolazi do znatnog smanjenja površinske hrapavosti. Anodna obrada uzoraka takođe značajno smanjuje površinsku hrapavost.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The effect of preparation of aluminum surface on surface roughness
T1  - Uticaj pripreme površine aluminijuma na površinsku hrapavost
VL  - 45
IS  - 1
SP  - 5
EP  - 12
UR  - https://hdl.handle.net/21.15107/rcub_cer_151
ER  - 

@article{
author = "Tomić, Milorad V. and Pavlović, Miomir and Rakočević, Zlatko Lj. and Pavlović, Ljubica",
year = "2004",
abstract = "Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface roughness was measured. The effect of the anode treatment on surface roughness was also investigated. The zinc coating was deposited on chemically and electrochemically treated aluminum samples, and afterwards the surface roughness of these samples was measured. Based on the results it was determined that from all of the solutions for electrochemical polishing, the most efficient solution is the solution number II. Aluminum samples treated with this solution are the least rough. It was determined that chemically deposited zinc coating on previously chemically and electrochemically treated samples leads to significant lowering of surface roughness. The anodic treatment of aluminum surface significantly lowers surface roughness also., Uzorci aluminijuma su podvrgavani elektrohemijskom glačanju u jednom od tri rastvora za elektrohemijsko glačanje. Na tako pripremljenim uzorcima merena je površinska hrapavost. Takođe je ispitivan i uticaj anadne obrade na površinsku hrapavost aluminijuma. Na hemijski i elektrohemijski pripremljene uzorke aluminijuma, taložena je prevlaka cinka hemijskim putem, a potom merena površinska hrapavost ovakvih uzoraka. Na osnovu dobijenih rezultata ustanovljeno je da je od ispitivanih rastvora za elektrohemijsko glačanje najefikasniji rastvor II. Uzorci aluminijuma tretirani u ovom rastvoru imaju najmanju hrapavost. Ustanovljeno je da usled taloženja hemijske prevlake cinka na prethodno hemijski i elektrohemijski tretirane uzorke dolazi do znatnog smanjenja površinske hrapavosti. Anodna obrada uzoraka takođe značajno smanjuje površinsku hrapavost.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The effect of preparation of aluminum surface on surface roughness, Uticaj pripreme površine aluminijuma na površinsku hrapavost",
volume = "45",
number = "1",
pages = "5-12",
url = "https://hdl.handle.net/21.15107/rcub_cer_151"
}

Tomić, M. V., Pavlović, M., Rakočević, Z. Lj.,& Pavlović, L.. (2004). The effect of preparation of aluminum surface on surface roughness. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 45(1), 5-12.
https://hdl.handle.net/21.15107/rcub_cer_151

Tomić MV, Pavlović M, Rakočević ZL, Pavlović L. The effect of preparation of aluminum surface on surface roughness. in Zaštita materijala. 2004;45(1):5-12.
https://hdl.handle.net/21.15107/rcub_cer_151 .

Tomić, Milorad V., Pavlović, Miomir, Rakočević, Zlatko Lj., Pavlović, Ljubica, "The effect of preparation of aluminum surface on surface roughness" in Zaštita materijala, 45, no. 1 (2004):5-12,
https://hdl.handle.net/21.15107/rcub_cer_151 .

TY  - JOUR
AU  - Tomić, Milorad V.
AU  - Pavlović, Ljubica
AU  - Pavlović, Miomir
AU  - Rakočević, Zlatko Lj.
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/152
AB  - The microstructure of the chemical coating of zinc on aluminum, as well as electrodeposited nickel coating on chemically deposited zinc were investigated with change of one parameter only-deposition time. Based on the structural characteristics of top coating of nickel, the optimum time for deposition of nickel coating was determine at the same conditions. Structural characteristics of metallic coatings were investigated by scanning tunneling microscopy (STM).
AB  - Ispitivana je mikrostruktura hemijske prevlake cinka na aluminijumu, kao i prevlake nikla koja je elektrohemijski taložena na hemijsku prevlaku cinka uz promenu samo jednog parametara-vremena taloženja. Na osnovu strukturnih karakteristika završne prevlake nikla, ustanovljeno je optimalno vreme taloženja prevlaka nikla pri datim uslovima. Strukturne karakteristike metalnih prevlaka ispitivane su skenirajućom tunelirajućom mikroskopijom (STM).
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The effect of deposition time on the structure of the top coating of nickel electrodeposited onto aluminum
T1  - Uticaj vremena taloženja na strukturu završne prevlake nikla na aluminijumu
VL  - 45
IS  - 1
SP  - 13
EP  - 17
UR  - https://hdl.handle.net/21.15107/rcub_cer_152
ER  - 

@article{
author = "Tomić, Milorad V. and Pavlović, Ljubica and Pavlović, Miomir and Rakočević, Zlatko Lj.",
year = "2004",
abstract = "The microstructure of the chemical coating of zinc on aluminum, as well as electrodeposited nickel coating on chemically deposited zinc were investigated with change of one parameter only-deposition time. Based on the structural characteristics of top coating of nickel, the optimum time for deposition of nickel coating was determine at the same conditions. Structural characteristics of metallic coatings were investigated by scanning tunneling microscopy (STM)., Ispitivana je mikrostruktura hemijske prevlake cinka na aluminijumu, kao i prevlake nikla koja je elektrohemijski taložena na hemijsku prevlaku cinka uz promenu samo jednog parametara-vremena taloženja. Na osnovu strukturnih karakteristika završne prevlake nikla, ustanovljeno je optimalno vreme taloženja prevlaka nikla pri datim uslovima. Strukturne karakteristike metalnih prevlaka ispitivane su skenirajućom tunelirajućom mikroskopijom (STM).",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The effect of deposition time on the structure of the top coating of nickel electrodeposited onto aluminum, Uticaj vremena taloženja na strukturu završne prevlake nikla na aluminijumu",
volume = "45",
number = "1",
pages = "13-17",
url = "https://hdl.handle.net/21.15107/rcub_cer_152"
}

Tomić, M. V., Pavlović, L., Pavlović, M.,& Rakočević, Z. Lj.. (2004). The effect of deposition time on the structure of the top coating of nickel electrodeposited onto aluminum. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 45(1), 13-17.
https://hdl.handle.net/21.15107/rcub_cer_152

Tomić MV, Pavlović L, Pavlović M, Rakočević ZL. The effect of deposition time on the structure of the top coating of nickel electrodeposited onto aluminum. in Zaštita materijala. 2004;45(1):13-17.
https://hdl.handle.net/21.15107/rcub_cer_152 .

Tomić, Milorad V., Pavlović, Ljubica, Pavlović, Miomir, Rakočević, Zlatko Lj., "The effect of deposition time on the structure of the top coating of nickel electrodeposited onto aluminum" in Zaštita materijala, 45, no. 1 (2004):13-17,
https://hdl.handle.net/21.15107/rcub_cer_152 .

TY  - JOUR
AU  - Tomić, Milorad V.
AU  - Pavlović, Ljubica
AU  - Pavlović, Miomir
AU  - Stojanović, Miodrag V.
AU  - Milošević, Bratislav
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/153
AB  - Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface reflection was measured. The effect of the anode treatment as the interface between the chemical preparation and electrochemical polishing on the surface reflection was shown. Based on the results it can be concluded that among all the solutions investigated, the most efficient solution for electrochemical polishing is the solution number II. Aluminum samples treated with this solution have the greatest reflection. The effects of temperature change and stirring on the aluminum reflection were also investigated. It was shown that mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal, with the small degree of diffuse reflection.
AB  - Uzorci aluminijuma su podvrgavani elektrohemijskom glačanju u jednom od tri rastvora za elektrohemijsko glačanje. Na tako pripremljenim uzorcima merena je površinska refleksija svetlosti. Pokazan je i uticaj anadne obrade kao među faze između hemijske pripreme i elektrohemijskog glačanja na refleksiju aluminijuma. Na osnovu dobijenih rezultata može se zaključiti da je od ispitivanih rastvora za elektrohemijsko glačanje, najefikasniji rastvor II. Uzorci aluminijuma tretirani u ovom rastvoru imaju najveću refleksiju. Takođe je ispitivan i uticaj promene temperature i mešanja rastvora na refleksiju aluminijuma. Pokazano je da se ogledalski sjaj metalnih površina može povezati sa visokim stepenom ogledalske refleksije svetlosti, koji se približava idealnoj refleksivnosti istog metala, uz što manji stepen difuzne refleksije.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The effect of preparation of aluminum surface on surface reflection
T1  - Uticaj pripreme površine aluminijuma na površinsku refleksiju
VL  - 45
IS  - 2
SP  - 63
EP  - 67
UR  - https://hdl.handle.net/21.15107/rcub_cer_153
ER  - 

@article{
author = "Tomić, Milorad V. and Pavlović, Ljubica and Pavlović, Miomir and Stojanović, Miodrag V. and Milošević, Bratislav",
year = "2004",
abstract = "Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface reflection was measured. The effect of the anode treatment as the interface between the chemical preparation and electrochemical polishing on the surface reflection was shown. Based on the results it can be concluded that among all the solutions investigated, the most efficient solution for electrochemical polishing is the solution number II. Aluminum samples treated with this solution have the greatest reflection. The effects of temperature change and stirring on the aluminum reflection were also investigated. It was shown that mirror brightness of metal surfaces can be associated with the high degree of mirror reflection which approaches very nearly the ideal reflectance of the same metal, with the small degree of diffuse reflection., Uzorci aluminijuma su podvrgavani elektrohemijskom glačanju u jednom od tri rastvora za elektrohemijsko glačanje. Na tako pripremljenim uzorcima merena je površinska refleksija svetlosti. Pokazan je i uticaj anadne obrade kao među faze između hemijske pripreme i elektrohemijskog glačanja na refleksiju aluminijuma. Na osnovu dobijenih rezultata može se zaključiti da je od ispitivanih rastvora za elektrohemijsko glačanje, najefikasniji rastvor II. Uzorci aluminijuma tretirani u ovom rastvoru imaju najveću refleksiju. Takođe je ispitivan i uticaj promene temperature i mešanja rastvora na refleksiju aluminijuma. Pokazano je da se ogledalski sjaj metalnih površina može povezati sa visokim stepenom ogledalske refleksije svetlosti, koji se približava idealnoj refleksivnosti istog metala, uz što manji stepen difuzne refleksije.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The effect of preparation of aluminum surface on surface reflection, Uticaj pripreme površine aluminijuma na površinsku refleksiju",
volume = "45",
number = "2",
pages = "63-67",
url = "https://hdl.handle.net/21.15107/rcub_cer_153"
}

Tomić, M. V., Pavlović, L., Pavlović, M., Stojanović, M. V.,& Milošević, B.. (2004). The effect of preparation of aluminum surface on surface reflection. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 45(2), 63-67.
https://hdl.handle.net/21.15107/rcub_cer_153

Tomić MV, Pavlović L, Pavlović M, Stojanović MV, Milošević B. The effect of preparation of aluminum surface on surface reflection. in Zaštita materijala. 2004;45(2):63-67.
https://hdl.handle.net/21.15107/rcub_cer_153 .

Tomić, Milorad V., Pavlović, Ljubica, Pavlović, Miomir, Stojanović, Miodrag V., Milošević, Bratislav, "The effect of preparation of aluminum surface on surface reflection" in Zaštita materijala, 45, no. 2 (2004):63-67,
https://hdl.handle.net/21.15107/rcub_cer_153 .

TY  - JOUR
AU  - Popov, Konstantin I.
AU  - Krstić, Snežana B.
AU  - Obradović, Milutin Č.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Ivanović, Evica
PY  - 2004
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/149
AB  - The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes.
AB  - Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current
T1  - Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom
VL  - 69
IS  - 1
SP  - 43
EP  - 51
DO  - 10.2298/JSC0401043P
ER  - 

@article{
author = "Popov, Konstantin I. and Krstić, Snežana B. and Obradović, Milutin Č. and Pavlović, Miomir and Pavlović, Ljubica and Ivanović, Evica",
year = "2004",
abstract = "The structure of the surface of copper powder particles is discussed and correlated with the lowest apparent density at which copper powder can still flow. It is shown that such structures can be easily obtained in the electrodeposition of powders in reversing current regimes., Razmatrana je struktura površine čestica bakarnog praha i korelisana s najmanjom nasipnom masom pri kojoj bakarni prah još uvek može da teče. Pokazano je da se takva struktura može lako dobiti elektrohemijskim taloženjem praha u režimu reversne struje.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current, Uticaj oblika I strukture čestica na tečljivost elektrolitičkog bakarnog praha III - model površine reprezentativne čestice tečljivog bakarnog praha dobijenog elektohemijskim taloženjem reversnom strujom",
volume = "69",
number = "1",
pages = "43-51",
doi = "10.2298/JSC0401043P"
}

Popov, K. I., Krstić, S. B., Obradović, M. Č., Pavlović, M., Pavlović, L.,& Ivanović, E.. (2004). The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 69(1), 43-51.
https://doi.org/10.2298/JSC0401043P

Popov KI, Krstić SB, Obradović MČ, Pavlović M, Pavlović L, Ivanović E. The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current. in Journal of the Serbian Chemical Society. 2004;69(1):43-51.
doi:10.2298/JSC0401043P .

Popov, Konstantin I., Krstić, Snežana B., Obradović, Milutin Č., Pavlović, Miomir, Pavlović, Ljubica, Ivanović, Evica, "The effect of the particle shape and structure on the flowability of electrolytic copper powder, III: A model of the surface of a representative particle of flowing copper powder electrodeposited by reversing current" in Journal of the Serbian Chemical Society, 69, no. 1 (2004):43-51,
https://doi.org/10.2298/JSC0401043P . .

TY  - JOUR
AU  - Tomić, Milorad V.
AU  - Pavlović, Miomir
AU  - Pavlović, Ljubica
AU  - Rakočević, Zlatko Lj.
PY  - 2003
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/124
AB  - In this work structure characteristics of the final coating of nickel were studied. Nickel was deposited onto chemically prepared aluminum, chemically and electrochemically. Structural characteristics of metallic coatings on aluminum were inspected by scanning electron microscopy (SEM) and scanning tunneling microscopy (STM). It was concluded that process of preparation of aluminum determines the structure of final coating.
AB  - U radu su prikazane strukturne karakteristike završne prevlake nikla Prevlake nikla su taložene na hemijski pripremljen aluminijum, hemijskim i elektrohemijskim putem. Strukturne karakteristike metalnih prevlaka ispitivane su skenirajućom elektronskom mikroskopijom (SEM) i skenirajućom tunelskom mikroskopijom (STM). Ustanovljeno je da način pripreme površine aluminijuma bitno utiče na strukturu završne prevlake.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - The effect of preparation of aluminum surface on the structure of final coating of nickel
T1  - Uticaj pripreme površine aluminijuma na strukturu završne prevlake nikla
VL  - 44
IS  - 4
SP  - 107
EP  - 112
UR  - https://hdl.handle.net/21.15107/rcub_cer_124
ER  - 

@article{
author = "Tomić, Milorad V. and Pavlović, Miomir and Pavlović, Ljubica and Rakočević, Zlatko Lj.",
year = "2003",
abstract = "In this work structure characteristics of the final coating of nickel were studied. Nickel was deposited onto chemically prepared aluminum, chemically and electrochemically. Structural characteristics of metallic coatings on aluminum were inspected by scanning electron microscopy (SEM) and scanning tunneling microscopy (STM). It was concluded that process of preparation of aluminum determines the structure of final coating., U radu su prikazane strukturne karakteristike završne prevlake nikla Prevlake nikla su taložene na hemijski pripremljen aluminijum, hemijskim i elektrohemijskim putem. Strukturne karakteristike metalnih prevlaka ispitivane su skenirajućom elektronskom mikroskopijom (SEM) i skenirajućom tunelskom mikroskopijom (STM). Ustanovljeno je da način pripreme površine aluminijuma bitno utiče na strukturu završne prevlake.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "The effect of preparation of aluminum surface on the structure of final coating of nickel, Uticaj pripreme površine aluminijuma na strukturu završne prevlake nikla",
volume = "44",
number = "4",
pages = "107-112",
url = "https://hdl.handle.net/21.15107/rcub_cer_124"
}

Tomić, M. V., Pavlović, M., Pavlović, L.,& Rakočević, Z. Lj.. (2003). The effect of preparation of aluminum surface on the structure of final coating of nickel. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 44(4), 107-112.
https://hdl.handle.net/21.15107/rcub_cer_124

Tomić MV, Pavlović M, Pavlović L, Rakočević ZL. The effect of preparation of aluminum surface on the structure of final coating of nickel. in Zaštita materijala. 2003;44(4):107-112.
https://hdl.handle.net/21.15107/rcub_cer_124 .

Tomić, Milorad V., Pavlović, Miomir, Pavlović, Ljubica, Rakočević, Zlatko Lj., "The effect of preparation of aluminum surface on the structure of final coating of nickel" in Zaštita materijala, 44, no. 4 (2003):107-112,
https://hdl.handle.net/21.15107/rcub_cer_124 .