TY  - CONF
AU  - Vorkapić, Miloš
AU  - Popović, Bogdan
AU  - Ćoćkalo, Dragan
AU  - Bakator, Mihalj
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6240
AB  - Sve veća upotreba aditivnih tehnologija zahteva potpunu implementaciju 7S alata. Osnovna suština je da se viškovi i otpad u preduzeću eliminišu što je više moguće kroz poznate Lean tehnike. Međutim, primena 7S alata uključuje još dva bitna elementa: bezbednost i timski rad. U savremenim proizvodnim procesima preduzeća moraju da obrate pažnju na ulogu zaposlenih u obezbeđivanju organizacione kulture i potpune bezbednosti na radu. Da bi se obezbedila konkurentska pozicija na tržištu, neophodno je ispitati povezanost svih elemenata alata 7S sa principima aditivne proizvodnje. Aditivna proizvodnja polako zamenjuje konvencionalnu proizvodnju. Međutim, u oba slučaja mora se voditi računa o zaštiti zdravlja zaposlenih na radnom mestu. Isparenja tokom proizvodnog procesa i opasne čestice praha čine aditivnu proizvodnju nestabilnijom. Ovim radom smo pokušali da pokažemo koliko su Lean alati vitalni u funkcionisanju aditivne proizvodnje.
AB  - The increasing use of additive technologies requires the complete implementation of 7S tools. 
The fundamental essence is to eliminate surpluses and waste in the enterprise as much as
possible through the known Lean techniques. However, the application of the 7S tool incorporates two more essential elements: safety and teamwork. In modern production processes, enterprises must pay attention to the role of employees in ensuring the organizational culture and complete safety at work. In order to ensure a competitive position in the market, it is indispensable to examine the connections of all elements of the 7S tool with the principles of additive manufacturing. Additive manufacturing is slowly replacing conventional manufacturing. However, in both cases, care must be taken to protect employees' health at the workplace. Fumes during the production process and dangerous powder particles make additive manufacturing more unstabile. With this work, we tried to show how vital Lean tools are in the functioning of additive manufacturing.
PB  - Beograd JUSK - Jedinstveno udruženje Srbije za  kvalitet / Belgrade - UASQ, United Association of Serbia for Quality
C3  - Zbornik sažetaka i radova - XIX Međunarodna konvencija o kvalitetu JUSK ICQ -  2023 / Book of Abstracts and Papers - XIX International convention on quality JUSK ICQ – 2023
T1  - Održivi razvoj preduzeća kroz primenu 7S alata u adaptivnoj proizvodnji
T1  - Enterprise sustainable development throught the application of the 7S tools in additive manufacturing
SP  - 87
EP  - 95
UR  - https://hdl.handle.net/21.15107/rcub_cer_6240
ER  - 

@conference{
author = "Vorkapić, Miloš and Popović, Bogdan and Ćoćkalo, Dragan and Bakator, Mihalj",
year = "2023",
abstract = "Sve veća upotreba aditivnih tehnologija zahteva potpunu implementaciju 7S alata. Osnovna suština je da se viškovi i otpad u preduzeću eliminišu što je više moguće kroz poznate Lean tehnike. Međutim, primena 7S alata uključuje još dva bitna elementa: bezbednost i timski rad. U savremenim proizvodnim procesima preduzeća moraju da obrate pažnju na ulogu zaposlenih u obezbeđivanju organizacione kulture i potpune bezbednosti na radu. Da bi se obezbedila konkurentska pozicija na tržištu, neophodno je ispitati povezanost svih elemenata alata 7S sa principima aditivne proizvodnje. Aditivna proizvodnja polako zamenjuje konvencionalnu proizvodnju. Međutim, u oba slučaja mora se voditi računa o zaštiti zdravlja zaposlenih na radnom mestu. Isparenja tokom proizvodnog procesa i opasne čestice praha čine aditivnu proizvodnju nestabilnijom. Ovim radom smo pokušali da pokažemo koliko su Lean alati vitalni u funkcionisanju aditivne proizvodnje., The increasing use of additive technologies requires the complete implementation of 7S tools. 
The fundamental essence is to eliminate surpluses and waste in the enterprise as much as
possible through the known Lean techniques. However, the application of the 7S tool incorporates two more essential elements: safety and teamwork. In modern production processes, enterprises must pay attention to the role of employees in ensuring the organizational culture and complete safety at work. In order to ensure a competitive position in the market, it is indispensable to examine the connections of all elements of the 7S tool with the principles of additive manufacturing. Additive manufacturing is slowly replacing conventional manufacturing. However, in both cases, care must be taken to protect employees' health at the workplace. Fumes during the production process and dangerous powder particles make additive manufacturing more unstabile. With this work, we tried to show how vital Lean tools are in the functioning of additive manufacturing.",
publisher = "Beograd JUSK - Jedinstveno udruženje Srbije za  kvalitet / Belgrade - UASQ, United Association of Serbia for Quality",
journal = "Zbornik sažetaka i radova - XIX Međunarodna konvencija o kvalitetu JUSK ICQ -  2023 / Book of Abstracts and Papers - XIX International convention on quality JUSK ICQ – 2023",
title = "Održivi razvoj preduzeća kroz primenu 7S alata u adaptivnoj proizvodnji, Enterprise sustainable development throught the application of the 7S tools in additive manufacturing",
pages = "87-95",
url = "https://hdl.handle.net/21.15107/rcub_cer_6240"
}

Vorkapić, M., Popović, B., Ćoćkalo, D.,& Bakator, M.. (2023). Održivi razvoj preduzeća kroz primenu 7S alata u adaptivnoj proizvodnji. in Zbornik sažetaka i radova - XIX Međunarodna konvencija o kvalitetu JUSK ICQ -  2023 / Book of Abstracts and Papers - XIX International convention on quality JUSK ICQ – 2023
Beograd JUSK - Jedinstveno udruženje Srbije za  kvalitet / Belgrade - UASQ, United Association of Serbia for Quality., 87-95.
https://hdl.handle.net/21.15107/rcub_cer_6240

Vorkapić M, Popović B, Ćoćkalo D, Bakator M. Održivi razvoj preduzeća kroz primenu 7S alata u adaptivnoj proizvodnji. in Zbornik sažetaka i radova - XIX Međunarodna konvencija o kvalitetu JUSK ICQ -  2023 / Book of Abstracts and Papers - XIX International convention on quality JUSK ICQ – 2023. 2023;:87-95.
https://hdl.handle.net/21.15107/rcub_cer_6240 .

Vorkapić, Miloš, Popović, Bogdan, Ćoćkalo, Dragan, Bakator, Mihalj, "Održivi razvoj preduzeća kroz primenu 7S alata u adaptivnoj proizvodnji" in Zbornik sažetaka i radova - XIX Međunarodna konvencija o kvalitetu JUSK ICQ -  2023 / Book of Abstracts and Papers - XIX International convention on quality JUSK ICQ – 2023 (2023):87-95,
https://hdl.handle.net/21.15107/rcub_cer_6240 .

Vorkapić, M., Mladenović, I., Popović, B., Ivanov, T., Baltić, M., Simonović, A.,& Ćoćkalo, D.. (2023). Primena aditivnih tehnologija u cirkularnoj proizvodnji za realizaciju prototipa kućišta elektronike od biorazgradivih materijala. 
Универзитет у Београду - Институт за хемију технологију и металургију – Институт од националног значаја за Републику Србију..
https://hdl.handle.net/21.15107/rcub_cer_6655

Vorkapić M, Mladenović I, Popović B, Ivanov T, Baltić M, Simonović A, Ćoćkalo D. Primena aditivnih tehnologija u cirkularnoj proizvodnji za realizaciju prototipa kućišta elektronike od biorazgradivih materijala. 2023;.
https://hdl.handle.net/21.15107/rcub_cer_6655 .

Vorkapić, Miloš, Mladenović, Ivana, Popović, Bogdan, Ivanov, Toni, Baltić, Marija, Simonović, Aleksandar, Ćoćkalo, Dragan, "Primena aditivnih tehnologija u cirkularnoj proizvodnji za realizaciju prototipa kućišta elektronike od biorazgradivih materijala" (2023),
https://hdl.handle.net/21.15107/rcub_cer_6655 .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Popović, Bogdan
AU  - Ćoćkalo, Dragan
AU  - Bakator, Mihalj
AU  - Stanisavljev, Sanja
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6330
AB  - In this paper, a comparison of conventional and additive manufacturing was made. Lean and sustainable manufacturing from the point of view of waste were also analyzed. It was established that conventional manufacturing is slowly being replaced by additive manufacturing, but its role is still significant. Lean manufacturing indicates that waste is everywhere, i.e. at all organizational levels. Sustainable manufacturing analyzes new technologies and measures their impact on environmental protection with as little resource consumption as possible. The paper examined the importance of additive manufacturing in sustainable manufacturing by considering Lean principles. In conclusion, there is a flowchart of documents and activities that methodologically introduce additive manufacturing through respect for Lean principles and sustainable production. Savings in production time, launching new products, and quick replacement of parts have become imperative today, and further continuation of this work should be aimed at defining models and procedures in the company's sustainable development.
PB  - Zrenjanin, Serbia : University of Novi Sad, Technical faculty “Mihajlo Pupin” in Zrenjanin
T2  - Journal of Engineering Management and Competitiveness (JEMC)
T1  - The importance and link of additive manufacturing with lean and sustainable manufacturing
VL  - 13
IS  - 1
SP  - 53
EP  - 60
DO  - 10.5937/JEMC2301053V
ER  - 

@article{
author = "Vorkapić, Miloš and Popović, Bogdan and Ćoćkalo, Dragan and Bakator, Mihalj and Stanisavljev, Sanja",
year = "2023",
abstract = "In this paper, a comparison of conventional and additive manufacturing was made. Lean and sustainable manufacturing from the point of view of waste were also analyzed. It was established that conventional manufacturing is slowly being replaced by additive manufacturing, but its role is still significant. Lean manufacturing indicates that waste is everywhere, i.e. at all organizational levels. Sustainable manufacturing analyzes new technologies and measures their impact on environmental protection with as little resource consumption as possible. The paper examined the importance of additive manufacturing in sustainable manufacturing by considering Lean principles. In conclusion, there is a flowchart of documents and activities that methodologically introduce additive manufacturing through respect for Lean principles and sustainable production. Savings in production time, launching new products, and quick replacement of parts have become imperative today, and further continuation of this work should be aimed at defining models and procedures in the company's sustainable development.",
publisher = "Zrenjanin, Serbia : University of Novi Sad, Technical faculty “Mihajlo Pupin” in Zrenjanin",
journal = "Journal of Engineering Management and Competitiveness (JEMC)",
title = "The importance and link of additive manufacturing with lean and sustainable manufacturing",
volume = "13",
number = "1",
pages = "53-60",
doi = "10.5937/JEMC2301053V"
}

Vorkapić, M., Popović, B., Ćoćkalo, D., Bakator, M.,& Stanisavljev, S.. (2023). The importance and link of additive manufacturing with lean and sustainable manufacturing. in Journal of Engineering Management and Competitiveness (JEMC)
Zrenjanin, Serbia : University of Novi Sad, Technical faculty “Mihajlo Pupin” in Zrenjanin., 13(1), 53-60.
https://doi.org/10.5937/JEMC2301053V

Vorkapić M, Popović B, Ćoćkalo D, Bakator M, Stanisavljev S. The importance and link of additive manufacturing with lean and sustainable manufacturing. in Journal of Engineering Management and Competitiveness (JEMC). 2023;13(1):53-60.
doi:10.5937/JEMC2301053V .

Vorkapić, Miloš, Popović, Bogdan, Ćoćkalo, Dragan, Bakator, Mihalj, Stanisavljev, Sanja, "The importance and link of additive manufacturing with lean and sustainable manufacturing" in Journal of Engineering Management and Competitiveness (JEMC), 13, no. 1 (2023):53-60,
https://doi.org/10.5937/JEMC2301053V . .

TY  - CONF
AU  - Ćoćkalo, Dragan
AU  - Bakator, Mihalj
AU  - Stanisavljev, Sanja
AU  - Terek Stojanović, Edit
AU  - Vorkapić, Miloš
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6040
AB  - The current global economic climate conditions brought challenges to enterprises and entrepreneurs. Uncertainty, higher risk, and intensified competition negatively affect the way business is conducted. Enterprises and entrepreneurs have to adapt to these changes. For economic relief and economic growth, youth entrepreneurship should be developed in a decisive manner. In this paper, youth entrepreneurship development through innovation capital is analysed. The main goal was to identify and discuss main factors that affect youth entrepreneurship development. In addition, entrepreneurship and innovation as two main concepts are also addressed. The result is a theoretical, circular model that provides a significant and concise overview on how innovation capital derives from entrepreneurship and innovation. The paper provides a solid base for future studies.
PB  - Niš, Serbia : Complex system research system
PB  - Mathematical Institute of the Serbian Academy of Sciences and Arts
C3  - Proceedings of 4th Virtual International Conference Path to a Knowledge Society-Managing Risks and Innovation PaKSoM 2022, December 08-09. 2022, , Niš, Serbia
T1  - The role of innovation capital in developing youth entrepreneurship
SP  - 117
EP  - 122
UR  - https://hdl.handle.net/21.15107/rcub_cer_6040
ER  - 

@conference{
author = "Ćoćkalo, Dragan and Bakator, Mihalj and Stanisavljev, Sanja and Terek Stojanović, Edit and Vorkapić, Miloš",
year = "2022",
abstract = "The current global economic climate conditions brought challenges to enterprises and entrepreneurs. Uncertainty, higher risk, and intensified competition negatively affect the way business is conducted. Enterprises and entrepreneurs have to adapt to these changes. For economic relief and economic growth, youth entrepreneurship should be developed in a decisive manner. In this paper, youth entrepreneurship development through innovation capital is analysed. The main goal was to identify and discuss main factors that affect youth entrepreneurship development. In addition, entrepreneurship and innovation as two main concepts are also addressed. The result is a theoretical, circular model that provides a significant and concise overview on how innovation capital derives from entrepreneurship and innovation. The paper provides a solid base for future studies.",
publisher = "Niš, Serbia : Complex system research system, Mathematical Institute of the Serbian Academy of Sciences and Arts",
journal = "Proceedings of 4th Virtual International Conference Path to a Knowledge Society-Managing Risks and Innovation PaKSoM 2022, December 08-09. 2022, , Niš, Serbia",
title = "The role of innovation capital in developing youth entrepreneurship",
pages = "117-122",
url = "https://hdl.handle.net/21.15107/rcub_cer_6040"
}

Ćoćkalo, D., Bakator, M., Stanisavljev, S., Terek Stojanović, E.,& Vorkapić, M.. (2022). The role of innovation capital in developing youth entrepreneurship. in Proceedings of 4th Virtual International Conference Path to a Knowledge Society-Managing Risks and Innovation PaKSoM 2022, December 08-09. 2022, , Niš, Serbia
Niš, Serbia : Complex system research system., 117-122.
https://hdl.handle.net/21.15107/rcub_cer_6040

Ćoćkalo D, Bakator M, Stanisavljev S, Terek Stojanović E, Vorkapić M. The role of innovation capital in developing youth entrepreneurship. in Proceedings of 4th Virtual International Conference Path to a Knowledge Society-Managing Risks and Innovation PaKSoM 2022, December 08-09. 2022, , Niš, Serbia. 2022;:117-122.
https://hdl.handle.net/21.15107/rcub_cer_6040 .

Ćoćkalo, Dragan, Bakator, Mihalj, Stanisavljev, Sanja, Terek Stojanović, Edit, Vorkapić, Miloš, "The role of innovation capital in developing youth entrepreneurship" in Proceedings of 4th Virtual International Conference Path to a Knowledge Society-Managing Risks and Innovation PaKSoM 2022, December 08-09. 2022, , Niš, Serbia (2022):117-122,
https://hdl.handle.net/21.15107/rcub_cer_6040 .

TY  - CONF
AU  - Bakator, Mihalj
AU  - Đorđević, Dejan
AU  - Ćoćkalo, Dragan
AU  - Bešić, Cariša
AU  - Vorkapić, Miloš
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5679
AB  - The globalization of markets, the fourth industrial revolution - Industry 4.0, and the post-pandemic business
paradigm affected not only domestic enterprises but enterprises around the world as well. Forecasts regarding
GDP growth, unemployment rates and competitiveness are provided and discussed by various organizations
(World Bank, European Central Bank, World Economic Forum etc.). Additionally, a large number of quarterly
reports on various metrics for almost every country are published. In this paper the existing data and reports
published by some of the noted organizations are analyzed. The goal is to provide a concise and informative
overview on potential domestic macro-economic trends, on national competitiveness and on the competitiveness
of domestic enterprises. The overview is conceptualized through discussing existing and potential economic
forecasts based on reports. The paper provides a solid basis for future research in the domain of domestic
economy and national competitiveness. The paper also provides suggestions and guidelines for improving the
competitiveness of domestic enterprises.
PB  - Zrenjanin : Technical Faculty "Mihajlo Pupin"
C3  - Proceedings - XI International Symposium Engineering Management and Competitiveness 2021 (EMC 2021), 18-19th June 2021, Zrenjanin, Serbia
T1  - Forecast for the domestic economy and national competitiveness
SP  - 195
EP  - 200
UR  - https://hdl.handle.net/21.15107/rcub_cer_5679
ER  - 

@conference{
author = "Bakator, Mihalj and Đorđević, Dejan and Ćoćkalo, Dragan and Bešić, Cariša and Vorkapić, Miloš",
year = "2021",
abstract = "The globalization of markets, the fourth industrial revolution - Industry 4.0, and the post-pandemic business
paradigm affected not only domestic enterprises but enterprises around the world as well. Forecasts regarding
GDP growth, unemployment rates and competitiveness are provided and discussed by various organizations
(World Bank, European Central Bank, World Economic Forum etc.). Additionally, a large number of quarterly
reports on various metrics for almost every country are published. In this paper the existing data and reports
published by some of the noted organizations are analyzed. The goal is to provide a concise and informative
overview on potential domestic macro-economic trends, on national competitiveness and on the competitiveness
of domestic enterprises. The overview is conceptualized through discussing existing and potential economic
forecasts based on reports. The paper provides a solid basis for future research in the domain of domestic
economy and national competitiveness. The paper also provides suggestions and guidelines for improving the
competitiveness of domestic enterprises.",
publisher = "Zrenjanin : Technical Faculty "Mihajlo Pupin"",
journal = "Proceedings - XI International Symposium Engineering Management and Competitiveness 2021 (EMC 2021), 18-19th June 2021, Zrenjanin, Serbia",
title = "Forecast for the domestic economy and national competitiveness",
pages = "195-200",
url = "https://hdl.handle.net/21.15107/rcub_cer_5679"
}

Bakator, M., Đorđević, D., Ćoćkalo, D., Bešić, C.,& Vorkapić, M.. (2021). Forecast for the domestic economy and national competitiveness. in Proceedings - XI International Symposium Engineering Management and Competitiveness 2021 (EMC 2021), 18-19th June 2021, Zrenjanin, Serbia
Zrenjanin : Technical Faculty "Mihajlo Pupin"., 195-200.
https://hdl.handle.net/21.15107/rcub_cer_5679

Bakator M, Đorđević D, Ćoćkalo D, Bešić C, Vorkapić M. Forecast for the domestic economy and national competitiveness. in Proceedings - XI International Symposium Engineering Management and Competitiveness 2021 (EMC 2021), 18-19th June 2021, Zrenjanin, Serbia. 2021;:195-200.
https://hdl.handle.net/21.15107/rcub_cer_5679 .

Bakator, Mihalj, Đorđević, Dejan, Ćoćkalo, Dragan, Bešić, Cariša, Vorkapić, Miloš, "Forecast for the domestic economy and national competitiveness" in Proceedings - XI International Symposium Engineering Management and Competitiveness 2021 (EMC 2021), 18-19th June 2021, Zrenjanin, Serbia (2021):195-200,
https://hdl.handle.net/21.15107/rcub_cer_5679 .

TY  - CONF
AU  - Ćoćkalo, Dragan
AU  - Bakator, Mihalj
AU  - Đorđević, Dejan
AU  - Vorkapić, Miloš
AU  - Stanisavljev, Sanja
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5680
AB  - The fourth industrial revolution - Industry 4.0has brought challenges to enterprises across the globe. In addition, the globalization of markets and the COVID-19 pandemic have put pressure on enterprises who want to achieve competitive ability. Amidst the challenges of the modern business environment, the concept of the fifth industrial revolution - Industry 5.0 arises as a Society 5.0 compatible and systematic transformation of the Industry 4.0 concept. Industry 5.0 is forthcoming and is not fully materialized. However, it derives and is complementary with the Society 5.0 initiative, which is present for five years now. In this paper, the drawbacks of Industry 4.0 and the concept of Industry 5.0 are analysed. The main goal of the paper is to present Industry 5.0 and the new paradigm of manufacturing and conducting business. The paper contributes to the existing body of literature and provides an adequate basis for future research in the domain of industrial revolutions, sustainability, and competitiveness
PB  - Niš, Serbia : Complex system research system
PB  - Belgrade : Mathematical Institute of Serbian Academy o Science and Arts
C3  - Proceedings - 3rd Virtual International Conference Path to a Knowledge Society - Managing Risks and Innovation (PaKSoM 2021), Niš, Serbia
T1  - Industry 5.0: A New Paradigm in Manufacturing
SP  - 245
EP  - 250
UR  - https://hdl.handle.net/21.15107/rcub_cer_5680
ER  - 

@conference{
author = "Ćoćkalo, Dragan and Bakator, Mihalj and Đorđević, Dejan and Vorkapić, Miloš and Stanisavljev, Sanja",
year = "2021",
abstract = "The fourth industrial revolution - Industry 4.0has brought challenges to enterprises across the globe. In addition, the globalization of markets and the COVID-19 pandemic have put pressure on enterprises who want to achieve competitive ability. Amidst the challenges of the modern business environment, the concept of the fifth industrial revolution - Industry 5.0 arises as a Society 5.0 compatible and systematic transformation of the Industry 4.0 concept. Industry 5.0 is forthcoming and is not fully materialized. However, it derives and is complementary with the Society 5.0 initiative, which is present for five years now. In this paper, the drawbacks of Industry 4.0 and the concept of Industry 5.0 are analysed. The main goal of the paper is to present Industry 5.0 and the new paradigm of manufacturing and conducting business. The paper contributes to the existing body of literature and provides an adequate basis for future research in the domain of industrial revolutions, sustainability, and competitiveness",
publisher = "Niš, Serbia : Complex system research system, Belgrade : Mathematical Institute of Serbian Academy o Science and Arts",
journal = "Proceedings - 3rd Virtual International Conference Path to a Knowledge Society - Managing Risks and Innovation (PaKSoM 2021), Niš, Serbia",
title = "Industry 5.0: A New Paradigm in Manufacturing",
pages = "245-250",
url = "https://hdl.handle.net/21.15107/rcub_cer_5680"
}

Ćoćkalo, D., Bakator, M., Đorđević, D., Vorkapić, M.,& Stanisavljev, S.. (2021). Industry 5.0: A New Paradigm in Manufacturing. in Proceedings - 3rd Virtual International Conference Path to a Knowledge Society - Managing Risks and Innovation (PaKSoM 2021), Niš, Serbia
Niš, Serbia : Complex system research system., 245-250.
https://hdl.handle.net/21.15107/rcub_cer_5680

Ćoćkalo D, Bakator M, Đorđević D, Vorkapić M, Stanisavljev S. Industry 5.0: A New Paradigm in Manufacturing. in Proceedings - 3rd Virtual International Conference Path to a Knowledge Society - Managing Risks and Innovation (PaKSoM 2021), Niš, Serbia. 2021;:245-250.
https://hdl.handle.net/21.15107/rcub_cer_5680 .

Ćoćkalo, Dragan, Bakator, Mihalj, Đorđević, Dejan, Vorkapić, Miloš, Stanisavljev, Sanja, "Industry 5.0: A New Paradigm in Manufacturing" in Proceedings - 3rd Virtual International Conference Path to a Knowledge Society - Managing Risks and Innovation (PaKSoM 2021), Niš, Serbia (2021):245-250,
https://hdl.handle.net/21.15107/rcub_cer_5680 .

TY  - CONF
AU  - Ćoćkalo, Dragan
AU  - Bakator, Mihalj
AU  - Đorđević, Dejan
AU  - Stanisavljev, Sanja
AU  - Vorkapić, Miloš
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4871
AB  - The globalization of markets affects how enterprises conduct business. In addition to the challenges of
the globalized market, enterprises have to adapt to changes that the coronavirus pandemic has brought to the
global business environment. In order for domestic enterprises to achieve competitiveness in such market
conditions, technological and industrial innovations are an imperative. In this paper the application of Industry
4.0 technologies is discussed and the potential of such technologies for improving competitiveness of domestic
enterprises is addressed. The paper provides a solid basis for future research in this domain.
PB  - Zrenjanin : Technical Faculty "Mihajlo Pupin"
C3  - XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021) October 07-08, 2021, Zrenjanin, Serbia
T1  - Improving competitiveness through technological and industrial innovation
SP  - 258
EP  - 263
UR  - https://hdl.handle.net/21.15107/rcub_cer_4871
ER  - 

@conference{
author = "Ćoćkalo, Dragan and Bakator, Mihalj and Đorđević, Dejan and Stanisavljev, Sanja and Vorkapić, Miloš",
year = "2021",
abstract = "The globalization of markets affects how enterprises conduct business. In addition to the challenges of
the globalized market, enterprises have to adapt to changes that the coronavirus pandemic has brought to the
global business environment. In order for domestic enterprises to achieve competitiveness in such market
conditions, technological and industrial innovations are an imperative. In this paper the application of Industry
4.0 technologies is discussed and the potential of such technologies for improving competitiveness of domestic
enterprises is addressed. The paper provides a solid basis for future research in this domain.",
publisher = "Zrenjanin : Technical Faculty "Mihajlo Pupin"",
journal = "XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021) October 07-08, 2021, Zrenjanin, Serbia",
title = "Improving competitiveness through technological and industrial innovation",
pages = "258-263",
url = "https://hdl.handle.net/21.15107/rcub_cer_4871"
}

Ćoćkalo, D., Bakator, M., Đorđević, D., Stanisavljev, S.,& Vorkapić, M.. (2021). Improving competitiveness through technological and industrial innovation. in XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021) October 07-08, 2021, Zrenjanin, Serbia
Zrenjanin : Technical Faculty "Mihajlo Pupin"., 258-263.
https://hdl.handle.net/21.15107/rcub_cer_4871

Ćoćkalo D, Bakator M, Đorđević D, Stanisavljev S, Vorkapić M. Improving competitiveness through technological and industrial innovation. in XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021) October 07-08, 2021, Zrenjanin, Serbia. 2021;:258-263.
https://hdl.handle.net/21.15107/rcub_cer_4871 .

Ćoćkalo, Dragan, Bakator, Mihalj, Đorđević, Dejan, Stanisavljev, Sanja, Vorkapić, Miloš, "Improving competitiveness through technological and industrial innovation" in XI International Conference Industrial Engineering and Environmental Protection 2021 (IIZS 2021) October 07-08, 2021, Zrenjanin, Serbia (2021):258-263,
https://hdl.handle.net/21.15107/rcub_cer_4871 .

TY  - JOUR
AU  - Ćoćkalo, Dragan
AU  - Vorkapić, Miloš
AU  - Kreculj, Dragan
AU  - Đorđević, Dejan
AU  - Frantlović, Miloš
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3862
AB  - The analysis of a new product realization from the view of customer
requirements and a relevant technical response of a company is presented
in this paper. Two types of tools are used: QFD and AHP. HOQ within
QFD is used for modeling technical requirements on the basis of defined
customer demands. AHP serves as an addition in the process of technical
requirements definition, it is used as a strategy for fast response to
customer requirements. A comparison between leading foreign and
domestic producers of transmitters has also been presented. HOQ
realization on the example of intelligent pressure transmitter has shown
that design parameters were defined. The implementation of AHP
methodology has pointed at the significance of modular architecture for
transmitter realization. Original contribution of this work is reflected in
QFD analysis solutions – customer requirements were satisfied by giving
technical characteristics with the aim of a new product realization.
AB  - У овом раду представљена је анализа реализације
новог производа са аспекта потреба купаца и
релевантног техничког одговора компаније. Користе
се две врсте алата: QFD и АHP. HOQ у оквиру QFD
се користи за моделирање техничких захтева на
основу дефинисаних потреба клијената. AHP служи
као додатак у процесу дефинисања техничких
захтева, употребљава се као стратегија за брзо
реаговање на захтеве купаца. Такође је приказано
поређење водећих страних и домаћих произвођача
трансмитера. Реализација HOQ-а на примеру
интелигентног трансмитера притиска показала је да
су параметри дизајна дефинисани. Примена AHP
методологије указала је на значај модуларне
архитектуре за реализацију трансмитера.
Оригинални допринос овог рада огледа се у QFD
анализама - захтеви купаца су удовољени давањем
техничких карактеристика са циљем реализације
новог производа.
PB  - Serbia : University of Belgrade, Faculty of Mechanical Engineering
T2  - FME Transactions
T1  - Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing
T1  - Кorišćenje QFD И AHP alata u slučaju proizvodnje industrijskih transmitera
IS  - 48
IS  - 1
SP  - 164
EP  - 172
DO  - 10.5937/fmet2001164C
ER  - 

@article{
author = "Ćoćkalo, Dragan and Vorkapić, Miloš and Kreculj, Dragan and Đorđević, Dejan and Frantlović, Miloš",
year = "2020",
abstract = "The analysis of a new product realization from the view of customer
requirements and a relevant technical response of a company is presented
in this paper. Two types of tools are used: QFD and AHP. HOQ within
QFD is used for modeling technical requirements on the basis of defined
customer demands. AHP serves as an addition in the process of technical
requirements definition, it is used as a strategy for fast response to
customer requirements. A comparison between leading foreign and
domestic producers of transmitters has also been presented. HOQ
realization on the example of intelligent pressure transmitter has shown
that design parameters were defined. The implementation of AHP
methodology has pointed at the significance of modular architecture for
transmitter realization. Original contribution of this work is reflected in
QFD analysis solutions – customer requirements were satisfied by giving
technical characteristics with the aim of a new product realization., У овом раду представљена је анализа реализације
новог производа са аспекта потреба купаца и
релевантног техничког одговора компаније. Користе
се две врсте алата: QFD и АHP. HOQ у оквиру QFD
се користи за моделирање техничких захтева на
основу дефинисаних потреба клијената. AHP служи
као додатак у процесу дефинисања техничких
захтева, употребљава се као стратегија за брзо
реаговање на захтеве купаца. Такође је приказано
поређење водећих страних и домаћих произвођача
трансмитера. Реализација HOQ-а на примеру
интелигентног трансмитера притиска показала је да
су параметри дизајна дефинисани. Примена AHP
методологије указала је на значај модуларне
архитектуре за реализацију трансмитера.
Оригинални допринос овог рада огледа се у QFD
анализама - захтеви купаца су удовољени давањем
техничких карактеристика са циљем реализације
новог производа.",
publisher = "Serbia : University of Belgrade, Faculty of Mechanical Engineering",
journal = "FME Transactions",
title = "Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing, Кorišćenje QFD И AHP alata u slučaju proizvodnje industrijskih transmitera",
number = "48, 1",
pages = "164-172",
doi = "10.5937/fmet2001164C"
}

Ćoćkalo, D., Vorkapić, M., Kreculj, D., Đorđević, D.,& Frantlović, M.. (2020). Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing. in FME Transactions
Serbia : University of Belgrade, Faculty of Mechanical Engineering.(48), 164-172.
https://doi.org/10.5937/fmet2001164C

Ćoćkalo D, Vorkapić M, Kreculj D, Đorđević D, Frantlović M. Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing. in FME Transactions. 2020;(48):164-172.
doi:10.5937/fmet2001164C .

Ćoćkalo, Dragan, Vorkapić, Miloš, Kreculj, Dragan, Đorđević, Dejan, Frantlović, Miloš, "Using QFD and AHP Tools in the Case of Industrial Transmitters Manufacturing" in FME Transactions, no. 48 (2020):164-172,
https://doi.org/10.5937/fmet2001164C . .

TY  - CHAP
AU  - Đorđević, Dejan
AU  - Ćoćkalo, Dragan
AU  - Bakator, Mihalj
AU  - Bogetić, Srđan
AU  - Vorkapić, Miloš
AU  - Bešić, Cariša
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3921
AB  - Amidst the globalization of markets and within the framework of the
fourth industrial revolution - Industry 4.0, domestic enterprises face challenges
when it comes to business and market performance. Domestic enterprises lack
necessary productivity and product quality in order to compete on the global
market. In this paper cloud computing solutions in various industries are analyzed.
The goal is to develop a cloud computing model for improving the
competitive ability of domestic enterprises. The model integrates several cloudbased
solutions and takes into consideration the business metrics of domestic
enterprises. Furthermore, future trends in cloud computing advances and its
application are discussed. The paper also presents suggestions and guidelines for
improving competitiveness of domestic enterprises through the application of
cloud computing solutions. The results of this study significantly contribute to
the existing body of literature and provide a solid basis for future research in the
domain of cloud computing application in industries in developing countries.
PB  - Springer
T2  - Lecture Notes in Mechanical Engineering - Proceedings of 5th International Conferenceon the Industry 4.0 Model for Advanced Manufacturing
T1  - A cloud computing model for achieving competitiveness of domestic enterprises
SP  - 239
EP  - 249
DO  - 10.1007/978-3-030-46212-3_17
ER  - 

@inbook{
author = "Đorđević, Dejan and Ćoćkalo, Dragan and Bakator, Mihalj and Bogetić, Srđan and Vorkapić, Miloš and Bešić, Cariša",
year = "2020",
abstract = "Amidst the globalization of markets and within the framework of the
fourth industrial revolution - Industry 4.0, domestic enterprises face challenges
when it comes to business and market performance. Domestic enterprises lack
necessary productivity and product quality in order to compete on the global
market. In this paper cloud computing solutions in various industries are analyzed.
The goal is to develop a cloud computing model for improving the
competitive ability of domestic enterprises. The model integrates several cloudbased
solutions and takes into consideration the business metrics of domestic
enterprises. Furthermore, future trends in cloud computing advances and its
application are discussed. The paper also presents suggestions and guidelines for
improving competitiveness of domestic enterprises through the application of
cloud computing solutions. The results of this study significantly contribute to
the existing body of literature and provide a solid basis for future research in the
domain of cloud computing application in industries in developing countries.",
publisher = "Springer",
journal = "Lecture Notes in Mechanical Engineering - Proceedings of 5th International Conferenceon the Industry 4.0 Model for Advanced Manufacturing",
booktitle = "A cloud computing model for achieving competitiveness of domestic enterprises",
pages = "239-249",
doi = "10.1007/978-3-030-46212-3_17"
}

Đorđević, D., Ćoćkalo, D., Bakator, M., Bogetić, S., Vorkapić, M.,& Bešić, C.. (2020). A cloud computing model for achieving competitiveness of domestic enterprises. in Lecture Notes in Mechanical Engineering - Proceedings of 5th International Conferenceon the Industry 4.0 Model for Advanced Manufacturing
Springer., 239-249.
https://doi.org/10.1007/978-3-030-46212-3_17

Đorđević D, Ćoćkalo D, Bakator M, Bogetić S, Vorkapić M, Bešić C. A cloud computing model for achieving competitiveness of domestic enterprises. in Lecture Notes in Mechanical Engineering - Proceedings of 5th International Conferenceon the Industry 4.0 Model for Advanced Manufacturing. 2020;:239-249.
doi:10.1007/978-3-030-46212-3_17 .

Đorđević, Dejan, Ćoćkalo, Dragan, Bakator, Mihalj, Bogetić, Srđan, Vorkapić, Miloš, Bešić, Cariša, "A cloud computing model for achieving competitiveness of domestic enterprises" in Lecture Notes in Mechanical Engineering - Proceedings of 5th International Conferenceon the Industry 4.0 Model for Advanced Manufacturing (2020):239-249,
https://doi.org/10.1007/978-3-030-46212-3_17 . .

TY  - CONF
AU  - Vorkapić, Miloš
AU  - Simonović, Aleksandar
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3922
AB  - U ovom radu prikazan je značaj aditivne proizvodnje u okviru Lean koncepta. Koncept definiše sedam
vrsta proizvodnog otpada, dok Lean proizvodnja podrazumeva uklanjanje tog otpada. Aditivna proizvodnja
ispunjava sve kriterijume kako bi se otpad sveo na minimum. Uopšteno, postoji razlika između ovih
proizvodnji. Lean proizvodnja je karakteristična za masovnu proizvodnju, dok je aditivna proizvodnja našla
primenu u maloserijskoj i pojedinačnoj proizvodnji. Najbolje se pokazala u izradi prototipa. U radu analiziran
je postupak izrade modela i strategija implementacije aditivne preozvodnje primenom Lean filozofije u
preduzeću.
AB  - In this paper, the importance of additive manufacturing within the Lean concept presented. The concept defines
seven types of production waste, while Lean production involves removing that waste. Additive manufacturing satisfies
all the criteria to minimize waste. In general, there is a difference between these productions. Lean production is
characteristic of mass production, while additive manufacturing has found application in small-scale and individual
production. Additive production best proved in prototyping. The paper analyzes the developing process of models and
strategies for the additive manufacturing implementation using Lean philosophy in the enterprise.
PB  - Uniiverzitet u Beogradu - Mašinski fakultet
C3  - 42. JUPITER konferencija (42nd JUPITER conference), 06-07 Oktobar 2020., Beograd, Srbija
T1  - Implementacija aditivne proizvodnje u Lean koncept
T1  - Implementation of additive manufacturing in the lean concept
SP  - 4.42
EP  - 4.47
UR  - https://hdl.handle.net/21.15107/rcub_cer_3922
ER  - 

@conference{
author = "Vorkapić, Miloš and Simonović, Aleksandar and Ćoćkalo, Dragan and Đorđević, Dejan",
year = "2020",
abstract = "U ovom radu prikazan je značaj aditivne proizvodnje u okviru Lean koncepta. Koncept definiše sedam
vrsta proizvodnog otpada, dok Lean proizvodnja podrazumeva uklanjanje tog otpada. Aditivna proizvodnja
ispunjava sve kriterijume kako bi se otpad sveo na minimum. Uopšteno, postoji razlika između ovih
proizvodnji. Lean proizvodnja je karakteristična za masovnu proizvodnju, dok je aditivna proizvodnja našla
primenu u maloserijskoj i pojedinačnoj proizvodnji. Najbolje se pokazala u izradi prototipa. U radu analiziran
je postupak izrade modela i strategija implementacije aditivne preozvodnje primenom Lean filozofije u
preduzeću., In this paper, the importance of additive manufacturing within the Lean concept presented. The concept defines
seven types of production waste, while Lean production involves removing that waste. Additive manufacturing satisfies
all the criteria to minimize waste. In general, there is a difference between these productions. Lean production is
characteristic of mass production, while additive manufacturing has found application in small-scale and individual
production. Additive production best proved in prototyping. The paper analyzes the developing process of models and
strategies for the additive manufacturing implementation using Lean philosophy in the enterprise.",
publisher = "Uniiverzitet u Beogradu - Mašinski fakultet",
journal = "42. JUPITER konferencija (42nd JUPITER conference), 06-07 Oktobar 2020., Beograd, Srbija",
title = "Implementacija aditivne proizvodnje u Lean koncept, Implementation of additive manufacturing in the lean concept",
pages = "4.42-4.47",
url = "https://hdl.handle.net/21.15107/rcub_cer_3922"
}

Vorkapić, M., Simonović, A., Ćoćkalo, D.,& Đorđević, D.. (2020). Implementacija aditivne proizvodnje u Lean koncept. in 42. JUPITER konferencija (42nd JUPITER conference), 06-07 Oktobar 2020., Beograd, Srbija
Uniiverzitet u Beogradu - Mašinski fakultet., 4.42-4.47.
https://hdl.handle.net/21.15107/rcub_cer_3922

Vorkapić M, Simonović A, Ćoćkalo D, Đorđević D. Implementacija aditivne proizvodnje u Lean koncept. in 42. JUPITER konferencija (42nd JUPITER conference), 06-07 Oktobar 2020., Beograd, Srbija. 2020;:4.42-4.47.
https://hdl.handle.net/21.15107/rcub_cer_3922 .

Vorkapić, Miloš, Simonović, Aleksandar, Ćoćkalo, Dragan, Đorđević, Dejan, "Implementacija aditivne proizvodnje u Lean koncept" in 42. JUPITER konferencija (42nd JUPITER conference), 06-07 Oktobar 2020., Beograd, Srbija (2020):4.42-4.47,
https://hdl.handle.net/21.15107/rcub_cer_3922 .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Spasojević-Brkić, Vesna
AU  - Đorđević, Dejan
AU  - Brkić, Aleksandar
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3357
AB  - Gap analysis represents a tool for raising the level of performances of products, processes and enterprise organization which is rarely used in risk management. This paper proposes the joint application of Gap and Pareto analysis, in aim to mitigate possible risks in production processes. It is based on the facts that key points in the production process indicate some serious oversights (gaps), characterized as errors, which can grow into risky elements that disturb the manufacturing process and final transmitter assembly. In this paper, finalizing and assembling pressure transmitter elements (modules), created by a domestic manufacturer, served as an example for the Gap analysis. Each electronic transmitter is consisted of three modules: measurement cell, mechanical coupling fixture and enclosure containing the electronics and the terminal block box. Through the implementation and assembly of these modules errors (or elements of potential risks) have been identified. Later on, using the Pareto chart, it has been seen that 80% of errors made during the transmitter manufacturing process have occurred while implementing the first and the third transmitter module. Also, by analyzing the collected gaps, it has been concluded that the critical ones happen while using the existing technology and engaging workforce. In order to eliminate the above-mentioned errors, this paper decidedly presents the Gap analysis steps which should be followed, so the transmitter manufacturing process would be improved in terms of quality. Similar methodology could be applied to other products and processes.
PB  - Belgrade : Institute for research and design in industry
T2  - Journal of Applied Engineering Science
T1  - Gap analysis and risk occurrence on the example of pressure transmitter`s production processes
VL  - 17
IS  - 4
SP  - 590
EP  - 598
DO  - 10.5937/jaes17-23443
ER  - 

@article{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Spasojević-Brkić, Vesna and Đorđević, Dejan and Brkić, Aleksandar",
year = "2019",
abstract = "Gap analysis represents a tool for raising the level of performances of products, processes and enterprise organization which is rarely used in risk management. This paper proposes the joint application of Gap and Pareto analysis, in aim to mitigate possible risks in production processes. It is based on the facts that key points in the production process indicate some serious oversights (gaps), characterized as errors, which can grow into risky elements that disturb the manufacturing process and final transmitter assembly. In this paper, finalizing and assembling pressure transmitter elements (modules), created by a domestic manufacturer, served as an example for the Gap analysis. Each electronic transmitter is consisted of three modules: measurement cell, mechanical coupling fixture and enclosure containing the electronics and the terminal block box. Through the implementation and assembly of these modules errors (or elements of potential risks) have been identified. Later on, using the Pareto chart, it has been seen that 80% of errors made during the transmitter manufacturing process have occurred while implementing the first and the third transmitter module. Also, by analyzing the collected gaps, it has been concluded that the critical ones happen while using the existing technology and engaging workforce. In order to eliminate the above-mentioned errors, this paper decidedly presents the Gap analysis steps which should be followed, so the transmitter manufacturing process would be improved in terms of quality. Similar methodology could be applied to other products and processes.",
publisher = "Belgrade : Institute for research and design in industry",
journal = "Journal of Applied Engineering Science",
title = "Gap analysis and risk occurrence on the example of pressure transmitter`s production processes",
volume = "17",
number = "4",
pages = "590-598",
doi = "10.5937/jaes17-23443"
}

Vorkapić, M., Ćoćkalo, D., Spasojević-Brkić, V., Đorđević, D.,& Brkić, A.. (2019). Gap analysis and risk occurrence on the example of pressure transmitter`s production processes. in Journal of Applied Engineering Science
Belgrade : Institute for research and design in industry., 17(4), 590-598.
https://doi.org/10.5937/jaes17-23443

Vorkapić M, Ćoćkalo D, Spasojević-Brkić V, Đorđević D, Brkić A. Gap analysis and risk occurrence on the example of pressure transmitter`s production processes. in Journal of Applied Engineering Science. 2019;17(4):590-598.
doi:10.5937/jaes17-23443 .

Vorkapić, Miloš, Ćoćkalo, Dragan, Spasojević-Brkić, Vesna, Đorđević, Dejan, Brkić, Aleksandar, "Gap analysis and risk occurrence on the example of pressure transmitter`s production processes" in Journal of Applied Engineering Science, 17, no. 4 (2019):590-598,
https://doi.org/10.5937/jaes17-23443 . .

TY  - JOUR
AU  - Bakator, Mihalj
AU  - Đorđević, Dejan
AU  - Ćoćkalo, Dragan
AU  - Nikolić, Milan
AU  - Vorkapić, Miloš
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2285
AB  - Youth entrepreneurship is important for reducing youth unemployment rates and it overall contributes to economic growth. The main idea of this research is to determine the barriers and challenges that young entrepreneurs face in Serbia. The paper analyzes literature in this domain, and compares the status of youth entrepreneurship and entrepreneurship overall between Serbia, the EU and the US. Furthermore, a theoretical model is developed that includes the application of Industry 4.0 (I4.0) technologies and lean startup approach. The results indicate that taxation regulation and the lack of financial support for new startups are the main barriers that the young face in Serbia. In addition, the lack of adequate entrepreneurial education creates difficulties, and demotivates potential entrepreneurs. Therefore, it is necessary to introduce or modify existing regulatory laws and introduce effective financial support for new enterprises.
AB  - Preduzetništvo mladih je važno zbog smanjenja stope nezaposlenosti u ovoj populaciji i doprinosa ekonomskom rastu. Glavna ideja ovog istraživanja je određivanje barijera i izazova sa kojima se susreću mladi preduzetnici u Srbiji. Ovaj rad analizira literaturu u ovom domenu i upoređuje stanje preduzetništva kod mladih kao i preduzetništva uopšte u Srbiji, EU i Americi. U nastavku, razvijen je teorijski model koji uključuje primenu 'Indsutrija 4.0' tehnologije i 'lean startup' pristup. Rezultati istraživanja indikuju da su neadekvatno regulsianje poreza i nedostatak finansijske podrške za nove startup-ove glavne barijere sa kojima se mladi susreću u Srbiji. Dodatno, nedostatak adekvatnog preduzetničkog obrazoavanja stvara poteškoće i demotiviše potencijalne mlade preduzetnike. Samim tim, potrebno je uvesti ili modifikovati postojeće regulisanje poreza i uvesti efektivnu finansijsku prodšku novim preduzećima i preduzetnicima.
PB  - University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin
T2  - Journal of Engineering Management and Competitiveness (JEMC)
T1  - Lean startups with industry 4.0 technologies: Overcoming the challenges of youth entrepreneurship in Serbia
T1  - Lean startup-ovi zasnovani na tehnologijama industrije 4.0 - prevazilaženje izazova preduzetništva mladih u Srbiji
VL  - 8
IS  - 2
SP  - 89
EP  - 101
DO  - 10.5937/jemc1802089B
ER  - 

@article{
author = "Bakator, Mihalj and Đorđević, Dejan and Ćoćkalo, Dragan and Nikolić, Milan and Vorkapić, Miloš",
year = "2018",
abstract = "Youth entrepreneurship is important for reducing youth unemployment rates and it overall contributes to economic growth. The main idea of this research is to determine the barriers and challenges that young entrepreneurs face in Serbia. The paper analyzes literature in this domain, and compares the status of youth entrepreneurship and entrepreneurship overall between Serbia, the EU and the US. Furthermore, a theoretical model is developed that includes the application of Industry 4.0 (I4.0) technologies and lean startup approach. The results indicate that taxation regulation and the lack of financial support for new startups are the main barriers that the young face in Serbia. In addition, the lack of adequate entrepreneurial education creates difficulties, and demotivates potential entrepreneurs. Therefore, it is necessary to introduce or modify existing regulatory laws and introduce effective financial support for new enterprises., Preduzetništvo mladih je važno zbog smanjenja stope nezaposlenosti u ovoj populaciji i doprinosa ekonomskom rastu. Glavna ideja ovog istraživanja je određivanje barijera i izazova sa kojima se susreću mladi preduzetnici u Srbiji. Ovaj rad analizira literaturu u ovom domenu i upoređuje stanje preduzetništva kod mladih kao i preduzetništva uopšte u Srbiji, EU i Americi. U nastavku, razvijen je teorijski model koji uključuje primenu 'Indsutrija 4.0' tehnologije i 'lean startup' pristup. Rezultati istraživanja indikuju da su neadekvatno regulsianje poreza i nedostatak finansijske podrške za nove startup-ove glavne barijere sa kojima se mladi susreću u Srbiji. Dodatno, nedostatak adekvatnog preduzetničkog obrazoavanja stvara poteškoće i demotiviše potencijalne mlade preduzetnike. Samim tim, potrebno je uvesti ili modifikovati postojeće regulisanje poreza i uvesti efektivnu finansijsku prodšku novim preduzećima i preduzetnicima.",
publisher = "University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin",
journal = "Journal of Engineering Management and Competitiveness (JEMC)",
title = "Lean startups with industry 4.0 technologies: Overcoming the challenges of youth entrepreneurship in Serbia, Lean startup-ovi zasnovani na tehnologijama industrije 4.0 - prevazilaženje izazova preduzetništva mladih u Srbiji",
volume = "8",
number = "2",
pages = "89-101",
doi = "10.5937/jemc1802089B"
}

Bakator, M., Đorđević, D., Ćoćkalo, D., Nikolić, M.,& Vorkapić, M.. (2018). Lean startups with industry 4.0 technologies: Overcoming the challenges of youth entrepreneurship in Serbia. in Journal of Engineering Management and Competitiveness (JEMC)
University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin., 8(2), 89-101.
https://doi.org/10.5937/jemc1802089B

Bakator M, Đorđević D, Ćoćkalo D, Nikolić M, Vorkapić M. Lean startups with industry 4.0 technologies: Overcoming the challenges of youth entrepreneurship in Serbia. in Journal of Engineering Management and Competitiveness (JEMC). 2018;8(2):89-101.
doi:10.5937/jemc1802089B .

Bakator, Mihalj, Đorđević, Dejan, Ćoćkalo, Dragan, Nikolić, Milan, Vorkapić, Miloš, "Lean startups with industry 4.0 technologies: Overcoming the challenges of youth entrepreneurship in Serbia" in Journal of Engineering Management and Competitiveness (JEMC), 8, no. 2 (2018):89-101,
https://doi.org/10.5937/jemc1802089B . .

TY  - CONF
AU  - Vorkapić, Miloš
AU  - Frantlović, Miloš
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
PY  - 2018
UR  - http://cent.mas.bg.ac.rs/jupiter/index.htm
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3908
AB  - U radu je analizirana tehnologija proizvodnje industrijskih transmitera, u saglasnosti sa potrebama krajnjeg
korisnika. Takođe, izvršeno je i poređenje domaćeg u odnosu na vodeće svetske proizvođače transmitera.
Primenom QFD metode na posmatranom primeru kroz analizu grešaka u procesu proizvodnje modula i
realizaciju kuće kvaliteta na primeru novog proizvoda - inteligentnog transmitera. Novo rešenje pokazuje da
su definisani svi parametri dizajna i da je modularna arhitektura prihvatljiva u dobijanju palete novih
proizvoda. Ti novi proizvodi mogu se koristiti za ponovnu upotrebu i reciklažu materijala.
AB  - In this paper we analyze the production technology of industrial transmitters from the aspect of customers'
needs. Also, a comparison is made between such products of one domestic and some of the world-leading transmitter
manufacturers. In the observed case the QFD method was used through the analysis of manufacturing errors. A
realization of the house of quality is presented using the example of a new product - an intelligent pressure transmitter.
The main design parameters are defined, and the modular architecture is accepted as optimal for the new product
range. The new products are made suitable for reuse and recycling.
PB  - Univerzitet u Beogradu - Mašinski fakultet
C3  - Zbornik radova - 41. JUPITER konferencija / Proceedings - 41nd JUPITER Conference
T1  - Upotreba QFD alata u realizaciji inteligentnih transmitera
SP  - 5.7
EP  - 5.12
UR  - https://hdl.handle.net/21.15107/rcub_cer_3908
ER  - 

@conference{
author = "Vorkapić, Miloš and Frantlović, Miloš and Ćoćkalo, Dragan and Đorđević, Dejan",
year = "2018",
abstract = "U radu je analizirana tehnologija proizvodnje industrijskih transmitera, u saglasnosti sa potrebama krajnjeg
korisnika. Takođe, izvršeno je i poređenje domaćeg u odnosu na vodeće svetske proizvođače transmitera.
Primenom QFD metode na posmatranom primeru kroz analizu grešaka u procesu proizvodnje modula i
realizaciju kuće kvaliteta na primeru novog proizvoda - inteligentnog transmitera. Novo rešenje pokazuje da
su definisani svi parametri dizajna i da je modularna arhitektura prihvatljiva u dobijanju palete novih
proizvoda. Ti novi proizvodi mogu se koristiti za ponovnu upotrebu i reciklažu materijala., In this paper we analyze the production technology of industrial transmitters from the aspect of customers'
needs. Also, a comparison is made between such products of one domestic and some of the world-leading transmitter
manufacturers. In the observed case the QFD method was used through the analysis of manufacturing errors. A
realization of the house of quality is presented using the example of a new product - an intelligent pressure transmitter.
The main design parameters are defined, and the modular architecture is accepted as optimal for the new product
range. The new products are made suitable for reuse and recycling.",
publisher = "Univerzitet u Beogradu - Mašinski fakultet",
journal = "Zbornik radova - 41. JUPITER konferencija / Proceedings - 41nd JUPITER Conference",
title = "Upotreba QFD alata u realizaciji inteligentnih transmitera",
pages = "5.7-5.12",
url = "https://hdl.handle.net/21.15107/rcub_cer_3908"
}

Vorkapić, M., Frantlović, M., Ćoćkalo, D.,& Đorđević, D.. (2018). Upotreba QFD alata u realizaciji inteligentnih transmitera. in Zbornik radova - 41. JUPITER konferencija / Proceedings - 41nd JUPITER Conference
Univerzitet u Beogradu - Mašinski fakultet., 5.7-5.12.
https://hdl.handle.net/21.15107/rcub_cer_3908

Vorkapić M, Frantlović M, Ćoćkalo D, Đorđević D. Upotreba QFD alata u realizaciji inteligentnih transmitera. in Zbornik radova - 41. JUPITER konferencija / Proceedings - 41nd JUPITER Conference. 2018;:5.7-5.12.
https://hdl.handle.net/21.15107/rcub_cer_3908 .

Vorkapić, Miloš, Frantlović, Miloš, Ćoćkalo, Dragan, Đorđević, Dejan, "Upotreba QFD alata u realizaciji inteligentnih transmitera" in Zbornik radova - 41. JUPITER konferencija / Proceedings - 41nd JUPITER Conference (2018):5.7-5.12,
https://hdl.handle.net/21.15107/rcub_cer_3908 .

TY  - CONF
AU  - Đorđević, Dejan
AU  - Perić, Bojan
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
PY  - 2018
UR  - http://ie.mas.bg.ac.rs/sie2018/
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3910
AB  - By definition, the risk represents suspense in relation to the desired outcomes. According to that, this project includes the algorithm which with the help of the tool CAD/CAM provides step analysis in the process of projecting to realization of the finished product. As well, algorithm points out the possible risks when presenting element or finished product.
PB  - University of Belgrade, Faculty of Mechanical Engineering
C3  - Proceedings of 7th International Symposium on Industrial Engineering SIE 2018
T1  - CAD/CAM tools in risk analysis during designing process
SP  - 62
EP  - 65
UR  - https://hdl.handle.net/21.15107/rcub_cer_3910
ER  - 

@conference{
author = "Đorđević, Dejan and Perić, Bojan and Vorkapić, Miloš and Ćoćkalo, Dragan",
year = "2018",
abstract = "By definition, the risk represents suspense in relation to the desired outcomes. According to that, this project includes the algorithm which with the help of the tool CAD/CAM provides step analysis in the process of projecting to realization of the finished product. As well, algorithm points out the possible risks when presenting element or finished product.",
publisher = "University of Belgrade, Faculty of Mechanical Engineering",
journal = "Proceedings of 7th International Symposium on Industrial Engineering SIE 2018",
title = "CAD/CAM tools in risk analysis during designing process",
pages = "62-65",
url = "https://hdl.handle.net/21.15107/rcub_cer_3910"
}

Đorđević, D., Perić, B., Vorkapić, M.,& Ćoćkalo, D.. (2018). CAD/CAM tools in risk analysis during designing process. in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018
University of Belgrade, Faculty of Mechanical Engineering., 62-65.
https://hdl.handle.net/21.15107/rcub_cer_3910

Đorđević D, Perić B, Vorkapić M, Ćoćkalo D. CAD/CAM tools in risk analysis during designing process. in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018. 2018;:62-65.
https://hdl.handle.net/21.15107/rcub_cer_3910 .

Đorđević, Dejan, Perić, Bojan, Vorkapić, Miloš, Ćoćkalo, Dragan, "CAD/CAM tools in risk analysis during designing process" in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018 (2018):62-65,
https://hdl.handle.net/21.15107/rcub_cer_3910 .

TY  - CONF
AU  - Ćoćkalo, Dragan
AU  - Bakator, Mihalj
AU  - Đorđević, Dejan
AU  - Vorkapić, Miloš
PY  - 2018
UR  - http://ie.mas.bg.ac.rs/sie2018/
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3911
AB  - In this systematic review the impact of ISO 9001 certification on business performance is addressed. A total of thirty (n=30) scientific articles in the domain of ISO 9001 certification are thoroughly analysed. The sum of samples of each analysed article is 9280. The findings indicate that almost half of the total sample size reported positive impact of certification. It is evident that ISO 9001 positively affects business performance. This paper can be used for further research as it provides a concise review on the effectiveness of quality management systems.
PB  - University of Belgrade, Faculty of Mechanical Engineering
C3  - Proceedings of 7th International Symposium on Industrial Engineering SIE 2018
T1  - A systematic literature rewiew in the domain of ISO 9001 certification and business improvement
SP  - 16
EP  - 19
UR  - https://hdl.handle.net/21.15107/rcub_cer_3911
ER  - 

@conference{
author = "Ćoćkalo, Dragan and Bakator, Mihalj and Đorđević, Dejan and Vorkapić, Miloš",
year = "2018",
abstract = "In this systematic review the impact of ISO 9001 certification on business performance is addressed. A total of thirty (n=30) scientific articles in the domain of ISO 9001 certification are thoroughly analysed. The sum of samples of each analysed article is 9280. The findings indicate that almost half of the total sample size reported positive impact of certification. It is evident that ISO 9001 positively affects business performance. This paper can be used for further research as it provides a concise review on the effectiveness of quality management systems.",
publisher = "University of Belgrade, Faculty of Mechanical Engineering",
journal = "Proceedings of 7th International Symposium on Industrial Engineering SIE 2018",
title = "A systematic literature rewiew in the domain of ISO 9001 certification and business improvement",
pages = "16-19",
url = "https://hdl.handle.net/21.15107/rcub_cer_3911"
}

Ćoćkalo, D., Bakator, M., Đorđević, D.,& Vorkapić, M.. (2018). A systematic literature rewiew in the domain of ISO 9001 certification and business improvement. in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018
University of Belgrade, Faculty of Mechanical Engineering., 16-19.
https://hdl.handle.net/21.15107/rcub_cer_3911

Ćoćkalo D, Bakator M, Đorđević D, Vorkapić M. A systematic literature rewiew in the domain of ISO 9001 certification and business improvement. in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018. 2018;:16-19.
https://hdl.handle.net/21.15107/rcub_cer_3911 .

Ćoćkalo, Dragan, Bakator, Mihalj, Đorđević, Dejan, Vorkapić, Miloš, "A systematic literature rewiew in the domain of ISO 9001 certification and business improvement" in Proceedings of 7th International Symposium on Industrial Engineering SIE 2018 (2018):16-19,
https://hdl.handle.net/21.15107/rcub_cer_3911 .

TY  - CONF
AU  - Ćoćkalo, Dragan
AU  - Vorkapić, Miloš
AU  - Bogetić, Srđan
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3905
AB  - The significance of Lean production and modular architecture in sustainable enterprise development is presented
in this paper. The implementation of Lean production in realization of modular design enables a development of
an appropriate production programme in which design costs are lower and reduction of waste during processing
is becoming an imperative. On the example of intelligent transmitters production it was shown that modular
architecture enables the production of independent entities, realizes modules according to precisely defined
technical documentation and makes possible easy servicing, improvements and fixing. The implementation of
Lean concept algorithm in a repeated use of materials in a sustainable enterprise development is presented as
well.
PB  - University of Novi Sad, Technical faculty “Mihajlo Pupin”, Zrenjanin, Republic of Serbia
C3  - VIII International Symposium Engineering Management and Competitiveness 2018 (EMC 2018), June 22-23, 2018, Zrenjanin, Serbia
T1  - Lean production and efficiency of modular architecture in sustainable enterprise development
SP  - 83
EP  - 88
UR  - https://hdl.handle.net/21.15107/rcub_cer_3905
ER  - 

@conference{
author = "Ćoćkalo, Dragan and Vorkapić, Miloš and Bogetić, Srđan",
year = "2018",
abstract = "The significance of Lean production and modular architecture in sustainable enterprise development is presented
in this paper. The implementation of Lean production in realization of modular design enables a development of
an appropriate production programme in which design costs are lower and reduction of waste during processing
is becoming an imperative. On the example of intelligent transmitters production it was shown that modular
architecture enables the production of independent entities, realizes modules according to precisely defined
technical documentation and makes possible easy servicing, improvements and fixing. The implementation of
Lean concept algorithm in a repeated use of materials in a sustainable enterprise development is presented as
well.",
publisher = "University of Novi Sad, Technical faculty “Mihajlo Pupin”, Zrenjanin, Republic of Serbia",
journal = "VIII International Symposium Engineering Management and Competitiveness 2018 (EMC 2018), June 22-23, 2018, Zrenjanin, Serbia",
title = "Lean production and efficiency of modular architecture in sustainable enterprise development",
pages = "83-88",
url = "https://hdl.handle.net/21.15107/rcub_cer_3905"
}

Ćoćkalo, D., Vorkapić, M.,& Bogetić, S.. (2018). Lean production and efficiency of modular architecture in sustainable enterprise development. in VIII International Symposium Engineering Management and Competitiveness 2018 (EMC 2018), June 22-23, 2018, Zrenjanin, Serbia
University of Novi Sad, Technical faculty “Mihajlo Pupin”, Zrenjanin, Republic of Serbia., 83-88.
https://hdl.handle.net/21.15107/rcub_cer_3905

Ćoćkalo D, Vorkapić M, Bogetić S. Lean production and efficiency of modular architecture in sustainable enterprise development. in VIII International Symposium Engineering Management and Competitiveness 2018 (EMC 2018), June 22-23, 2018, Zrenjanin, Serbia. 2018;:83-88.
https://hdl.handle.net/21.15107/rcub_cer_3905 .

Ćoćkalo, Dragan, Vorkapić, Miloš, Bogetić, Srđan, "Lean production and efficiency of modular architecture in sustainable enterprise development" in VIII International Symposium Engineering Management and Competitiveness 2018 (EMC 2018), June 22-23, 2018, Zrenjanin, Serbia (2018):83-88,
https://hdl.handle.net/21.15107/rcub_cer_3905 .

TY  - JOUR
AU  - Bogetić, Srđan
AU  - Đorđević, Dejan
AU  - Ćoćkalo, Dragan
AU  - Vorkapić, Miloš
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2278
AB  - In contemporary business, issues such as environmental protection, taking care of employees and their job satisfaction, ethical principles, supporting endangered groups, caring about young people, caring about the society and the like, are serious challenges that a company has to deal with, no matter which industry it belongs to. One of the most important principles of contemporary business is an organisation based on responsibility. An organisation has to take full responsibility for its actions in the environment in which it operates. Contemporary business puts responsibility on the level of each individual as well. Global market leaders have accepted the application of the concept of corporate social responsibility (CSR) with a view to satisfying customers' and other stakeholders' demands. What is seen as a prerequisite for a successful realisation of CSR concepts in a company is a genuine wish for its application by the management, management's readiness to understand the basic postulates of this concept, good communication (both internal and external), promotion of examples of good practice in the company and outside of it, motivating employees for a more active role in realising good business practices. In this paper, the authors have presented the results of a survey about young people's attitudes towards corporate social responsibility.
AB  - U savremenom poslovanju, pitanja poput zaštita životne sredine, briga o zaposlenima i njihovom zadovoljstvu radom u preduzeću, etičkim principima, podrška ugroženim grupama, briga o mladima, briga o društvu i sl., predstavljaju ozbiljne izazove sa kojim se susreću preduzeća, bez obzira na privrednu granu kojoj pripadaju. Organizacija zasnovana na odgovornosti predstavlja jedan od najznačajnijih principa savremenog poslovanja. Organizacija mora da preuzme punu odgovornost za svoje delovanje u okruženju. Savremeno poslovanje odgovornost stavlja i na nivo svakog pojedinca. Globalni tržišni lideri su prihvatili primenu koncepta korporativne društvene odgovornosti (CSR) u cilju zadovoljenja zahteva potrošača i drugih stejkholdera. Kao preduslovi za uspešnu realizaciju koncepta CSR u preduzeću mogu se uočiti istinska želja rukovodstva za njegovu primenu, spremnost rukovodstva da shvati i razume osnovne postulate ovog koncepta, dobra komunikacija (interna i eksterna), promovisanje primera dobre prakse u samom preduzeću i van njega, motivisanje zaposlenih za aktivniju ulogu u realizaciji dobre poslovne prakse. U radu je dat prikaz rezultate istraživanja o stavovima mladih prema korporativnoj društvenoj odgovornosti.
PB  - University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin
T2  - Journal of Engineering Management and Competitiveness (JEMC)
T1  - Corporate social responsibility as a factor of global competitiveness
T1  - Korporativna društvena odgovornost kao faktor globalne konkurentnosti
VL  - 8
IS  - 1
SP  - 11
EP  - 19
DO  - 10.5937/jemc1801011B
ER  - 

@article{
author = "Bogetić, Srđan and Đorđević, Dejan and Ćoćkalo, Dragan and Vorkapić, Miloš",
year = "2018",
abstract = "In contemporary business, issues such as environmental protection, taking care of employees and their job satisfaction, ethical principles, supporting endangered groups, caring about young people, caring about the society and the like, are serious challenges that a company has to deal with, no matter which industry it belongs to. One of the most important principles of contemporary business is an organisation based on responsibility. An organisation has to take full responsibility for its actions in the environment in which it operates. Contemporary business puts responsibility on the level of each individual as well. Global market leaders have accepted the application of the concept of corporate social responsibility (CSR) with a view to satisfying customers' and other stakeholders' demands. What is seen as a prerequisite for a successful realisation of CSR concepts in a company is a genuine wish for its application by the management, management's readiness to understand the basic postulates of this concept, good communication (both internal and external), promotion of examples of good practice in the company and outside of it, motivating employees for a more active role in realising good business practices. In this paper, the authors have presented the results of a survey about young people's attitudes towards corporate social responsibility., U savremenom poslovanju, pitanja poput zaštita životne sredine, briga o zaposlenima i njihovom zadovoljstvu radom u preduzeću, etičkim principima, podrška ugroženim grupama, briga o mladima, briga o društvu i sl., predstavljaju ozbiljne izazove sa kojim se susreću preduzeća, bez obzira na privrednu granu kojoj pripadaju. Organizacija zasnovana na odgovornosti predstavlja jedan od najznačajnijih principa savremenog poslovanja. Organizacija mora da preuzme punu odgovornost za svoje delovanje u okruženju. Savremeno poslovanje odgovornost stavlja i na nivo svakog pojedinca. Globalni tržišni lideri su prihvatili primenu koncepta korporativne društvene odgovornosti (CSR) u cilju zadovoljenja zahteva potrošača i drugih stejkholdera. Kao preduslovi za uspešnu realizaciju koncepta CSR u preduzeću mogu se uočiti istinska želja rukovodstva za njegovu primenu, spremnost rukovodstva da shvati i razume osnovne postulate ovog koncepta, dobra komunikacija (interna i eksterna), promovisanje primera dobre prakse u samom preduzeću i van njega, motivisanje zaposlenih za aktivniju ulogu u realizaciji dobre poslovne prakse. U radu je dat prikaz rezultate istraživanja o stavovima mladih prema korporativnoj društvenoj odgovornosti.",
publisher = "University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin",
journal = "Journal of Engineering Management and Competitiveness (JEMC)",
title = "Corporate social responsibility as a factor of global competitiveness, Korporativna društvena odgovornost kao faktor globalne konkurentnosti",
volume = "8",
number = "1",
pages = "11-19",
doi = "10.5937/jemc1801011B"
}

Bogetić, S., Đorđević, D., Ćoćkalo, D.,& Vorkapić, M.. (2018). Corporate social responsibility as a factor of global competitiveness. in Journal of Engineering Management and Competitiveness (JEMC)
University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin., 8(1), 11-19.
https://doi.org/10.5937/jemc1801011B

Bogetić S, Đorđević D, Ćoćkalo D, Vorkapić M. Corporate social responsibility as a factor of global competitiveness. in Journal of Engineering Management and Competitiveness (JEMC). 2018;8(1):11-19.
doi:10.5937/jemc1801011B .

Bogetić, Srđan, Đorđević, Dejan, Ćoćkalo, Dragan, Vorkapić, Miloš, "Corporate social responsibility as a factor of global competitiveness" in Journal of Engineering Management and Competitiveness (JEMC), 8, no. 1 (2018):11-19,
https://doi.org/10.5937/jemc1801011B . .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Sajfert, Dragana
AU  - Đorđević, Dejan
AU  - Cvijanović, Strahinja
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2068
AB  - The paper presents a theoretic model for improving the manufacturing process that was developed and tested in small-scale production enterprises. The model also represents a new organizational model which enables a complete implementation of pull strategy, insufficiently used in Serbia up to now, with a stress on sustainable manufacturing process, remanufacturing process and environmental protection. The model also includes the guidelines to SMEs - how to use energy, materials and water rationally during the process of manufacturing new products. Development of new products in SMEs on the territory of the Republic of Serbia is burdened by numerous problems among which the most influential ones are: financial flow, poor market estimation, lack of knowledge, lack of ISO 9001 certificate and weak organizational structure. On the bases of the data research we have identified the following problems in small enterprises: individual knowledge, distribution and realization of work tasks, increase of operational expenses caused by bad distribution of work tasks, exceptionally poor communication with consumers.
AB  - U radu je prikazan teoretski model za poboljšanje procesa proizvodnje koji je razvijen i testiran u malim proizvodnim preduzećima. Takođe, model predstavlja nov organizacioni model koji omogućava potpunu primenu pull strategije koje nije dovoljno zastupljena u Srbiji, a sa osvrtom na održivi proces proizvodnje proces ponovne proizvodnje, i sve zastupljeniji aspekt zaštite životne sredine. U modelu su dete smernice o tome kako da SMEs racionalno troše energiju, materijale, vodu i enrgiju u procesu proizvodnje novog proizvoda. Razvoj novih proizvoda u SMEs na teritoriji Republike Srbije prate mnogi problemi, a među najuticajnijim su: finansijski tokovi, loša procena tržišta, znanje nedostatak ISO 9001 sertifikata i slaba organizaciona struktura. Na osnovu podataka iz istraživanja, identifikovani su sledeći problemi u malim preduzećima: znanja pojedinaca, distribucija i realizacija poslovnih zadataka, porast operativnih troškova zbog loše podele poslova, izrazito loše komunikacije sa potrošačima.
PB  - Economics institute, Belgrade
T2  - Industrija
T1  - The model for improving the manufacturing process in Serbian small-scale production enterprises
T1  - Model za unapređenje procesa proizvodnje u srpskim preduzećima sa maloserijskim tipom proizvodnje
VL  - 45
IS  - 1
SP  - 7
EP  - 24
DO  - 10.5937/industrija45-10089
ER  - 

@article{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Sajfert, Dragana and Đorđević, Dejan and Cvijanović, Strahinja",
year = "2017",
abstract = "The paper presents a theoretic model for improving the manufacturing process that was developed and tested in small-scale production enterprises. The model also represents a new organizational model which enables a complete implementation of pull strategy, insufficiently used in Serbia up to now, with a stress on sustainable manufacturing process, remanufacturing process and environmental protection. The model also includes the guidelines to SMEs - how to use energy, materials and water rationally during the process of manufacturing new products. Development of new products in SMEs on the territory of the Republic of Serbia is burdened by numerous problems among which the most influential ones are: financial flow, poor market estimation, lack of knowledge, lack of ISO 9001 certificate and weak organizational structure. On the bases of the data research we have identified the following problems in small enterprises: individual knowledge, distribution and realization of work tasks, increase of operational expenses caused by bad distribution of work tasks, exceptionally poor communication with consumers., U radu je prikazan teoretski model za poboljšanje procesa proizvodnje koji je razvijen i testiran u malim proizvodnim preduzećima. Takođe, model predstavlja nov organizacioni model koji omogućava potpunu primenu pull strategije koje nije dovoljno zastupljena u Srbiji, a sa osvrtom na održivi proces proizvodnje proces ponovne proizvodnje, i sve zastupljeniji aspekt zaštite životne sredine. U modelu su dete smernice o tome kako da SMEs racionalno troše energiju, materijale, vodu i enrgiju u procesu proizvodnje novog proizvoda. Razvoj novih proizvoda u SMEs na teritoriji Republike Srbije prate mnogi problemi, a među najuticajnijim su: finansijski tokovi, loša procena tržišta, znanje nedostatak ISO 9001 sertifikata i slaba organizaciona struktura. Na osnovu podataka iz istraživanja, identifikovani su sledeći problemi u malim preduzećima: znanja pojedinaca, distribucija i realizacija poslovnih zadataka, porast operativnih troškova zbog loše podele poslova, izrazito loše komunikacije sa potrošačima.",
publisher = "Economics institute, Belgrade",
journal = "Industrija",
title = "The model for improving the manufacturing process in Serbian small-scale production enterprises, Model za unapređenje procesa proizvodnje u srpskim preduzećima sa maloserijskim tipom proizvodnje",
volume = "45",
number = "1",
pages = "7-24",
doi = "10.5937/industrija45-10089"
}

Vorkapić, M., Ćoćkalo, D., Sajfert, D., Đorđević, D.,& Cvijanović, S.. (2017). The model for improving the manufacturing process in Serbian small-scale production enterprises. in Industrija
Economics institute, Belgrade., 45(1), 7-24.
https://doi.org/10.5937/industrija45-10089

Vorkapić M, Ćoćkalo D, Sajfert D, Đorđević D, Cvijanović S. The model for improving the manufacturing process in Serbian small-scale production enterprises. in Industrija. 2017;45(1):7-24.
doi:10.5937/industrija45-10089 .

Vorkapić, Miloš, Ćoćkalo, Dragan, Sajfert, Dragana, Đorđević, Dejan, Cvijanović, Strahinja, "The model for improving the manufacturing process in Serbian small-scale production enterprises" in Industrija, 45, no. 1 (2017):7-24,
https://doi.org/10.5937/industrija45-10089 . .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Poljak, Predrag
AU  - Ćoćkalo, Dragan Ž.
AU  - Đorđević, Dejan
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2083
AB  - In this paper is shown importance of modular architecture in the sustainable development of enterprises. The application of modular design enables the development of the production program based on the results of its own development. At the illustrated example, the production of transmitters it was concluded that modular architecture enables the production of independent entities, provides the realization of products in inaccessible places, enables to precisely defined technical documentation of modules, enabling easy maintenance, repair and improvement. This paper describes an algorithm for material reuse which indicates the importance of the customer in a closed material flow. In this connection, PLC includes protection of the environment as a strategic decision in the sustainable development of enterprises.
AB  - U ovom radu je prikazan značaj modularne arhitekture u održivom razvoju preduzeća. Primena modularnog dizajna omogućava razvijanje proizvodnog programa koji se bazira na rezultatima sopstvenog razvoja. Na primeru, proizvodnje transmitera konstatovano je da modularna arhitektura omogućava proizvodnju nezavisnih entiteta, omogućava realizaciju proizvoda na nepristupačnim mestima, realizuje module prema tačno definisanoj tehničkoj dokumentaciji, omogućava lako servisiranje, popravke i unapređenje. U radu je opisan algoritam za ponovnu upotrebu materijala koji ukazuje na značaj kupca u zatvorenom toku materijala. S tim u vezi, ŽCP uključuje zaštitu životne sredine kao stratešku odluku u održivom razvoju preduzeća.
PB  - Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - The importance of modular product design in the sustainable development of enterprises
T1  - Značaj modularnog dizajna proizvoda u održivom razvoju preduzeća
VL  - 72
IS  - 4
SP  - 581
EP  - 586
DO  - 10.5937/tehnika1704581V
ER  - 

@article{
author = "Vorkapić, Miloš and Poljak, Predrag and Ćoćkalo, Dragan Ž. and Đorđević, Dejan",
year = "2017",
abstract = "In this paper is shown importance of modular architecture in the sustainable development of enterprises. The application of modular design enables the development of the production program based on the results of its own development. At the illustrated example, the production of transmitters it was concluded that modular architecture enables the production of independent entities, provides the realization of products in inaccessible places, enables to precisely defined technical documentation of modules, enabling easy maintenance, repair and improvement. This paper describes an algorithm for material reuse which indicates the importance of the customer in a closed material flow. In this connection, PLC includes protection of the environment as a strategic decision in the sustainable development of enterprises., U ovom radu je prikazan značaj modularne arhitekture u održivom razvoju preduzeća. Primena modularnog dizajna omogućava razvijanje proizvodnog programa koji se bazira na rezultatima sopstvenog razvoja. Na primeru, proizvodnje transmitera konstatovano je da modularna arhitektura omogućava proizvodnju nezavisnih entiteta, omogućava realizaciju proizvoda na nepristupačnim mestima, realizuje module prema tačno definisanoj tehničkoj dokumentaciji, omogućava lako servisiranje, popravke i unapređenje. U radu je opisan algoritam za ponovnu upotrebu materijala koji ukazuje na značaj kupca u zatvorenom toku materijala. S tim u vezi, ŽCP uključuje zaštitu životne sredine kao stratešku odluku u održivom razvoju preduzeća.",
publisher = "Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "The importance of modular product design in the sustainable development of enterprises, Značaj modularnog dizajna proizvoda u održivom razvoju preduzeća",
volume = "72",
number = "4",
pages = "581-586",
doi = "10.5937/tehnika1704581V"
}

Vorkapić, M., Poljak, P., Ćoćkalo, D. Ž.,& Đorđević, D.. (2017). The importance of modular product design in the sustainable development of enterprises. in Tehnika
Savez inženjera i tehničara Srbije., 72(4), 581-586.
https://doi.org/10.5937/tehnika1704581V

Vorkapić M, Poljak P, Ćoćkalo DŽ, Đorđević D. The importance of modular product design in the sustainable development of enterprises. in Tehnika. 2017;72(4):581-586.
doi:10.5937/tehnika1704581V .

Vorkapić, Miloš, Poljak, Predrag, Ćoćkalo, Dragan Ž., Đorđević, Dejan, "The importance of modular product design in the sustainable development of enterprises" in Tehnika, 72, no. 4 (2017):581-586,
https://doi.org/10.5937/tehnika1704581V . .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
AU  - Bešić, Cariša
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2072
AB  - The paper deals with the analysis of elements which represent a starting point in implementation of a business process reengineering. We have used Lean tools through the analysis of 5S model in our research. On the example of finalization of the finished transmitter in IHMT-CMT production, 5S tools were implemented with a focus on Quality elements although the theory shows that BPR and TQM are two opposite activities in an enterprise. We wanted to distinguish the significance of employees’ self-discipline which helps the process of product finalization to develop in time and without waste and losses. In addition, the employees keep their work place clean, tidy and functional.
AB  - U ovom radu analizirani su elementi koji bi predstavljali polaznu osnovu za u primeni reinženjeringa poslovnih procesa. Kao polazna osnova upotrebljen je Lean alat kroz analizu 5S modela. Na primeru finalizacije izrade gotovog transmitera u proizvodnji IHMT-CMT-a ustavonljeni su i primenjeni 5S alati, ali sa zadrškom na elemente kvaliteta iako teorija ukazuje za su BPR i TQM dve suprotne aktivnosti u preduzeću. Suština rada je samodisciplina zaposlenih na radnom mestu, koja pomaže da se proces finalizacije proizvoda odvija pravovremeno, bez otpada i gubitaka i da zaposleni stalno održavaju radno mesto uredno, čisto i funkcionalno.
PB  - University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin
T2  - Journal of Engineering Management and Competitiveness (JEMC)
T1  - Implementation of 5S tools as a starting point in business process reengineering
T1  - Primena 5S alata kao polazne osnove u reinženjeringu poslovnih procesa
VL  - 7
IS  - 1
SP  - 44
EP  - 54
DO  - 10.5937/jemc1701044V
ER  - 

@article{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Đorđević, Dejan and Bešić, Cariša",
year = "2017",
abstract = "The paper deals with the analysis of elements which represent a starting point in implementation of a business process reengineering. We have used Lean tools through the analysis of 5S model in our research. On the example of finalization of the finished transmitter in IHMT-CMT production, 5S tools were implemented with a focus on Quality elements although the theory shows that BPR and TQM are two opposite activities in an enterprise. We wanted to distinguish the significance of employees’ self-discipline which helps the process of product finalization to develop in time and without waste and losses. In addition, the employees keep their work place clean, tidy and functional., U ovom radu analizirani su elementi koji bi predstavljali polaznu osnovu za u primeni reinženjeringa poslovnih procesa. Kao polazna osnova upotrebljen je Lean alat kroz analizu 5S modela. Na primeru finalizacije izrade gotovog transmitera u proizvodnji IHMT-CMT-a ustavonljeni su i primenjeni 5S alati, ali sa zadrškom na elemente kvaliteta iako teorija ukazuje za su BPR i TQM dve suprotne aktivnosti u preduzeću. Suština rada je samodisciplina zaposlenih na radnom mestu, koja pomaže da se proces finalizacije proizvoda odvija pravovremeno, bez otpada i gubitaka i da zaposleni stalno održavaju radno mesto uredno, čisto i funkcionalno.",
publisher = "University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin",
journal = "Journal of Engineering Management and Competitiveness (JEMC)",
title = "Implementation of 5S tools as a starting point in business process reengineering, Primena 5S alata kao polazne osnove u reinženjeringu poslovnih procesa",
volume = "7",
number = "1",
pages = "44-54",
doi = "10.5937/jemc1701044V"
}

Vorkapić, M., Ćoćkalo, D., Đorđević, D.,& Bešić, C.. (2017). Implementation of 5S tools as a starting point in business process reengineering. in Journal of Engineering Management and Competitiveness (JEMC)
University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin., 7(1), 44-54.
https://doi.org/10.5937/jemc1701044V

Vorkapić M, Ćoćkalo D, Đorđević D, Bešić C. Implementation of 5S tools as a starting point in business process reengineering. in Journal of Engineering Management and Competitiveness (JEMC). 2017;7(1):44-54.
doi:10.5937/jemc1701044V .

Vorkapić, Miloš, Ćoćkalo, Dragan, Đorđević, Dejan, Bešić, Cariša, "Implementation of 5S tools as a starting point in business process reengineering" in Journal of Engineering Management and Competitiveness (JEMC), 7, no. 1 (2017):44-54,
https://doi.org/10.5937/jemc1701044V . .

TY  - CONF
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
AU  - Minić, Siniša, G.
AU  - Terek, Edit
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3894
AB  - ”Market pull” strategy is dominating in small scale manufacturing enterprises in the Republic of Serbia. The research whose results are presented in this work has determined the significance of this strategy from the aspect of developing new products. The strategy is reflected in close collaboration of enterprises and their customers, from the idea to the final product, including R & D activities. Beside customers, the main sources of ideas are: competitors and fairs. It has been also determined that marketing activities related to introduction of new products are limited and in comparison to the results from surrounding countries Serbia doesn’t lag behind. However, in order to improve the activities related to the development of new products in Serbian small-scale manufacturing enterprises we have suggested two strategies in this work: ”open innovation” in making closer collaboration with external knowledge sources and the creation of ”innovative networks” with partners in this concept usage. Limitations of this research are: weak feedback from respondents (the questionnaire was sent by e-mail), geographical limitations of the sample and the lack of homogenious sample group in the analysis of certain parameters.
PB  - Zrenjanin : University of Novi Sad, Technical Faculty "Mihajlo Pupin"
C3  - Proceedings - VI International Symposium Engineering Management and Competitiveness 2016 (EMC 2016)
T1  - The importance of new product development in Serbian small-scale manufacturing enterprises
SP  - 37
EP  - 42
UR  - https://hdl.handle.net/21.15107/rcub_cer_3894
ER  - 

@conference{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Đorđević, Dejan and Minić, Siniša, G. and Terek, Edit",
year = "2016",
abstract = "”Market pull” strategy is dominating in small scale manufacturing enterprises in the Republic of Serbia. The research whose results are presented in this work has determined the significance of this strategy from the aspect of developing new products. The strategy is reflected in close collaboration of enterprises and their customers, from the idea to the final product, including R & D activities. Beside customers, the main sources of ideas are: competitors and fairs. It has been also determined that marketing activities related to introduction of new products are limited and in comparison to the results from surrounding countries Serbia doesn’t lag behind. However, in order to improve the activities related to the development of new products in Serbian small-scale manufacturing enterprises we have suggested two strategies in this work: ”open innovation” in making closer collaboration with external knowledge sources and the creation of ”innovative networks” with partners in this concept usage. Limitations of this research are: weak feedback from respondents (the questionnaire was sent by e-mail), geographical limitations of the sample and the lack of homogenious sample group in the analysis of certain parameters.",
publisher = "Zrenjanin : University of Novi Sad, Technical Faculty "Mihajlo Pupin"",
journal = "Proceedings - VI International Symposium Engineering Management and Competitiveness 2016 (EMC 2016)",
title = "The importance of new product development in Serbian small-scale manufacturing enterprises",
pages = "37-42",
url = "https://hdl.handle.net/21.15107/rcub_cer_3894"
}

Vorkapić, M., Ćoćkalo, D., Đorđević, D., Minić, S. G.,& Terek, E.. (2016). The importance of new product development in Serbian small-scale manufacturing enterprises. in Proceedings - VI International Symposium Engineering Management and Competitiveness 2016 (EMC 2016)
Zrenjanin : University of Novi Sad, Technical Faculty "Mihajlo Pupin"., 37-42.
https://hdl.handle.net/21.15107/rcub_cer_3894

Vorkapić M, Ćoćkalo D, Đorđević D, Minić SG, Terek E. The importance of new product development in Serbian small-scale manufacturing enterprises. in Proceedings - VI International Symposium Engineering Management and Competitiveness 2016 (EMC 2016). 2016;:37-42.
https://hdl.handle.net/21.15107/rcub_cer_3894 .

Vorkapić, Miloš, Ćoćkalo, Dragan, Đorđević, Dejan, Minić, Siniša, G., Terek, Edit, "The importance of new product development in Serbian small-scale manufacturing enterprises" in Proceedings - VI International Symposium Engineering Management and Competitiveness 2016 (EMC 2016) (2016):37-42,
https://hdl.handle.net/21.15107/rcub_cer_3894 .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3895
AB  - This  paper  presents  an  algorithm  that  makes  it  possible  to  improve  manufacturing  process  in  an enterprise  with  small  scale  production.  Today,  Lean  concept  is  more  and  more  used  in  the  process  of  improving production. Also, on the case of transmitters' production, implementation of Lean concept is analyzed based on the known principles. Credibility of the algorithm is reflected in giving recommendations on how to eliminate the short comings  in  the  production  process  through  transmitters:  regular  movement  of  employees,  regular  sequence  of operations,  products  design,  and  cooperation  with  customers,  reducing  inventory  and  control  introduction  in  all stages of the process. The paper gives an example of how to save material and other resources in the company.
PB  - Belgrade, Serbia : United Association of Serbia for Quality (UASQ)
T2  - International Journal - Advanced Quality
T1  - The importance of Lean concept in sustainable development of enterprises with small scale production
VL  - 44
IS  - 2
SP  - 19
EP  - 22
DO  - 10.25137/IJAQ.n2.v44.y2016.p23-28
ER  - 

@article{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Đorđević, Dejan",
year = "2016",
abstract = "This  paper  presents  an  algorithm  that  makes  it  possible  to  improve  manufacturing  process  in  an enterprise  with  small  scale  production.  Today,  Lean  concept  is  more  and  more  used  in  the  process  of  improving production. Also, on the case of transmitters' production, implementation of Lean concept is analyzed based on the known principles. Credibility of the algorithm is reflected in giving recommendations on how to eliminate the short comings  in  the  production  process  through  transmitters:  regular  movement  of  employees,  regular  sequence  of operations,  products  design,  and  cooperation  with  customers,  reducing  inventory  and  control  introduction  in  all stages of the process. The paper gives an example of how to save material and other resources in the company.",
publisher = "Belgrade, Serbia : United Association of Serbia for Quality (UASQ)",
journal = "International Journal - Advanced Quality",
title = "The importance of Lean concept in sustainable development of enterprises with small scale production",
volume = "44",
number = "2",
pages = "19-22",
doi = "10.25137/IJAQ.n2.v44.y2016.p23-28"
}

Vorkapić, M., Ćoćkalo, D.,& Đorđević, D.. (2016). The importance of Lean concept in sustainable development of enterprises with small scale production. in International Journal - Advanced Quality
Belgrade, Serbia : United Association of Serbia for Quality (UASQ)., 44(2), 19-22.
https://doi.org/10.25137/IJAQ.n2.v44.y2016.p23-28

Vorkapić M, Ćoćkalo D, Đorđević D. The importance of Lean concept in sustainable development of enterprises with small scale production. in International Journal - Advanced Quality. 2016;44(2):19-22.
doi:10.25137/IJAQ.n2.v44.y2016.p23-28 .

Vorkapić, Miloš, Ćoćkalo, Dragan, Đorđević, Dejan, "The importance of Lean concept in sustainable development of enterprises with small scale production" in International Journal - Advanced Quality, 44, no. 2 (2016):19-22,
https://doi.org/10.25137/IJAQ.n2.v44.y2016.p23-28 . .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1972
AB  - The research results relating to the new product development are represented in this paper. The importance of market pull strategy is described too. Market pull strategy is reflected in the enterprise cooperation with customers from idea concept to final product, which includes R&D activities. Customers appear as external sources of ideas, but instead of them the main sources of ideas are competitors and fairs. Also, marketing activities in SMEs are very limited. In comparison to the neighboring countries Serbia does not have inferior position. For the new product development in Serbian enterprises with small-scale production, the paper proposes two strategies: 'open Innovation' and 'innovative network'. Open innovations are important because of the close cooperation between companies and external knowledge sources, while innovative networks strategy has its advantages in creating business cooperation with subcontractors in the use of ideas and knowledge sources. Limitations of this study are: very poor response rate, geographical limitation and lack of a specific homogeneous group of samples in the analysis of certain parameters.
PB  - Beograd : Institut za istraživanja i projektovanja u privredi
T2  - Journal of Applied Engineering Science
T1  - The acceptable strategies for new product development in Serbian small-scale manufacturing enterprises
VL  - 14
IS  - 2
SP  - 213
EP  - 221
DO  - 10.5937/jaes14-10880
ER  - 

@article{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Đorđević, Dejan",
year = "2016",
abstract = "The research results relating to the new product development are represented in this paper. The importance of market pull strategy is described too. Market pull strategy is reflected in the enterprise cooperation with customers from idea concept to final product, which includes R&D activities. Customers appear as external sources of ideas, but instead of them the main sources of ideas are competitors and fairs. Also, marketing activities in SMEs are very limited. In comparison to the neighboring countries Serbia does not have inferior position. For the new product development in Serbian enterprises with small-scale production, the paper proposes two strategies: 'open Innovation' and 'innovative network'. Open innovations are important because of the close cooperation between companies and external knowledge sources, while innovative networks strategy has its advantages in creating business cooperation with subcontractors in the use of ideas and knowledge sources. Limitations of this study are: very poor response rate, geographical limitation and lack of a specific homogeneous group of samples in the analysis of certain parameters.",
publisher = "Beograd : Institut za istraživanja i projektovanja u privredi",
journal = "Journal of Applied Engineering Science",
title = "The acceptable strategies for new product development in Serbian small-scale manufacturing enterprises",
volume = "14",
number = "2",
pages = "213-221",
doi = "10.5937/jaes14-10880"
}

Vorkapić, M., Ćoćkalo, D.,& Đorđević, D.. (2016). The acceptable strategies for new product development in Serbian small-scale manufacturing enterprises. in Journal of Applied Engineering Science
Beograd : Institut za istraživanja i projektovanja u privredi., 14(2), 213-221.
https://doi.org/10.5937/jaes14-10880

Vorkapić M, Ćoćkalo D, Đorđević D. The acceptable strategies for new product development in Serbian small-scale manufacturing enterprises. in Journal of Applied Engineering Science. 2016;14(2):213-221.
doi:10.5937/jaes14-10880 .

Vorkapić, Miloš, Ćoćkalo, Dragan, Đorđević, Dejan, "The acceptable strategies for new product development in Serbian small-scale manufacturing enterprises" in Journal of Applied Engineering Science, 14, no. 2 (2016):213-221,
https://doi.org/10.5937/jaes14-10880 . .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Popović, Bogdan
AU  - Ćoćkalo, Dragan
AU  - Đorđević, Dejan
AU  - Minić, Siniša G.
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1782
AB  - This paper presents the algorithm for introducing the strategies ensuring the sustainable development of enterprises, but also provides improvement of small-scale manufacturing process. Three strategies are given in the algorithm: Remanufacturing, modification and 4R. Credibility of the algorithm is reflected in: defining the basic input and output elements, defining the important environmental factors, importance of resources and in defining a sustainable production process. The combination of the aforementioned strategies enables local enterprises to perceive easily the importance of achievements in developed countries. Reuse of products is implemented through: verification, disassembling, replacement of parts, installation of modified parts and components, cleaning, re-assembling and testing. The algorithm gives an example of how to save materials and energy appearing as huge losses in manufacturing process.
PB  - University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin
T2  - Journal of Engineering Management and Competitiveness (JEMC)
T1  - A model for introducing strategies in sustainable development of small-scale enterprises in Serbia
VL  - 5
IS  - 2
SP  - 77
EP  - 83
DO  - 10.5937/jemc1502077V
ER  - 

@article{
author = "Vorkapić, Miloš and Popović, Bogdan and Ćoćkalo, Dragan and Đorđević, Dejan and Minić, Siniša G.",
year = "2015",
abstract = "This paper presents the algorithm for introducing the strategies ensuring the sustainable development of enterprises, but also provides improvement of small-scale manufacturing process. Three strategies are given in the algorithm: Remanufacturing, modification and 4R. Credibility of the algorithm is reflected in: defining the basic input and output elements, defining the important environmental factors, importance of resources and in defining a sustainable production process. The combination of the aforementioned strategies enables local enterprises to perceive easily the importance of achievements in developed countries. Reuse of products is implemented through: verification, disassembling, replacement of parts, installation of modified parts and components, cleaning, re-assembling and testing. The algorithm gives an example of how to save materials and energy appearing as huge losses in manufacturing process.",
publisher = "University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin",
journal = "Journal of Engineering Management and Competitiveness (JEMC)",
title = "A model for introducing strategies in sustainable development of small-scale enterprises in Serbia",
volume = "5",
number = "2",
pages = "77-83",
doi = "10.5937/jemc1502077V"
}

Vorkapić, M., Popović, B., Ćoćkalo, D., Đorđević, D.,& Minić, S. G.. (2015). A model for introducing strategies in sustainable development of small-scale enterprises in Serbia. in Journal of Engineering Management and Competitiveness (JEMC)
University of Novi Sad, Technical faculty Mihajlo Pupin, Zrenjanin., 5(2), 77-83.
https://doi.org/10.5937/jemc1502077V

Vorkapić M, Popović B, Ćoćkalo D, Đorđević D, Minić SG. A model for introducing strategies in sustainable development of small-scale enterprises in Serbia. in Journal of Engineering Management and Competitiveness (JEMC). 2015;5(2):77-83.
doi:10.5937/jemc1502077V .

Vorkapić, Miloš, Popović, Bogdan, Ćoćkalo, Dragan, Đorđević, Dejan, Minić, Siniša G., "A model for introducing strategies in sustainable development of small-scale enterprises in Serbia" in Journal of Engineering Management and Competitiveness (JEMC), 5, no. 2 (2015):77-83,
https://doi.org/10.5937/jemc1502077V . .

TY  - JOUR
AU  - Vorkapić, Miloš
AU  - Ćoćkalo, Dragan
AU  - Živojinović, Danijela
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1168
AB  - In this paper was shown modification of small dimensions pressure transmitter. Modification of the transmitter is a model that provides to improve the manufacturing process. Modification of the IHTM transmitters proved to be a good strategy, the disadvantages are eliminated and the savings obtained the material. Use of this modified transmitter allows the company to achieve good results with small investments.
AB  - U ovom radu je prikazana modifikacija malogabaritnog transmitera pritiska. Modifikacija transmitera predstavlja model koji obezbeđuje da se unapredi proces proizvodnje. Modifikacija transmitera u IHTM pokazala se kao dobra strategija, nedostaci su eliminisani i dobijena je ušteda na materijalu. Upotreba ovako modifikovanog transmitera omogućava preduzeću da uz manja ulaganja postigne dobre poslovne rezultate.
PB  - Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Modification and use of small dimensions pressure transmitters
T1  - Modifikacija i upotreba malogabaritnog transmitera pritiska
VL  - 68
IS  - 1
SP  - 185
EP  - 191
UR  - https://hdl.handle.net/21.15107/rcub_cer_1168
ER  - 

@article{
author = "Vorkapić, Miloš and Ćoćkalo, Dragan and Živojinović, Danijela",
year = "2013",
abstract = "In this paper was shown modification of small dimensions pressure transmitter. Modification of the transmitter is a model that provides to improve the manufacturing process. Modification of the IHTM transmitters proved to be a good strategy, the disadvantages are eliminated and the savings obtained the material. Use of this modified transmitter allows the company to achieve good results with small investments., U ovom radu je prikazana modifikacija malogabaritnog transmitera pritiska. Modifikacija transmitera predstavlja model koji obezbeđuje da se unapredi proces proizvodnje. Modifikacija transmitera u IHTM pokazala se kao dobra strategija, nedostaci su eliminisani i dobijena je ušteda na materijalu. Upotreba ovako modifikovanog transmitera omogućava preduzeću da uz manja ulaganja postigne dobre poslovne rezultate.",
publisher = "Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Modification and use of small dimensions pressure transmitters, Modifikacija i upotreba malogabaritnog transmitera pritiska",
volume = "68",
number = "1",
pages = "185-191",
url = "https://hdl.handle.net/21.15107/rcub_cer_1168"
}

Vorkapić, M., Ćoćkalo, D.,& Živojinović, D.. (2013). Modification and use of small dimensions pressure transmitters. in Tehnika
Savez inženjera i tehničara Srbije., 68(1), 185-191.
https://hdl.handle.net/21.15107/rcub_cer_1168

Vorkapić M, Ćoćkalo D, Živojinović D. Modification and use of small dimensions pressure transmitters. in Tehnika. 2013;68(1):185-191.
https://hdl.handle.net/21.15107/rcub_cer_1168 .

Vorkapić, Miloš, Ćoćkalo, Dragan, Živojinović, Danijela, "Modification and use of small dimensions pressure transmitters" in Tehnika, 68, no. 1 (2013):185-191,
https://hdl.handle.net/21.15107/rcub_cer_1168 .