TY  - JOUR
AU  - Premović, Milena
AU  - Tomović, Milica
AU  - Minić, Duško
AU  - Manasijević, Dragan
AU  - Živković, Dragana
AU  - Ćosović, Vladan
AU  - Grkovic, Vladan
AU  - Đorđevic, Aleksandar
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2239
AB  - Ternary Al-Ag-Ga system at 200 degrees C was experimentally and thermodynamically assessed. Isothermal section was extrapolated using optimized thermodynamic parameters for constitutive binary systems. Microstructure and phase composition of the selected alloy samples were analyzed using light microscopy, scanning electron microscopy combined with energy-dispersive spectrometry and x-ray powder diffraction technique. The obtained experimental results were found to be in a close agreement with the predicted phase equilibria. Hardness and electrical conductivity of the alloy samples from four vertical sections Al-Ag80Ga20, Al-Ag60Ga40, Ag-Al80Ga20 and Ag-Al60Ga40 of the ternary Al-Ag-Ga system at 200 degrees C were experimentally determined using Brinell method and eddy current measurements. Additionally, hardness of the individual phases present in the microstructure of the studied alloy samples was determined using Vickers microhardness test. Based on experimentally obtained results, isolines of Brinell hardness and electrical conductivity were calculated for the alloys from isothermal section of the ternary Al-Ag-Ga system at 200 degrees C.
PB  - Springer, New York
T2  - Journal of Materials Engineering and Performance
T1  - Determination of 200 degrees C Isothermal Section of Al-Ag-Ga Phase Diagram by Microanalysis, X-ray Diffraction, Hardness and Electrical Conductivity Measurements
VL  - 26
IS  - 6
SP  - 2491
EP  - 2501
DO  - 10.1007/s11665-017-2689-4
ER  - 

@article{
author = "Premović, Milena and Tomović, Milica and Minić, Duško and Manasijević, Dragan and Živković, Dragana and Ćosović, Vladan and Grkovic, Vladan and Đorđevic, Aleksandar",
year = "2017",
abstract = "Ternary Al-Ag-Ga system at 200 degrees C was experimentally and thermodynamically assessed. Isothermal section was extrapolated using optimized thermodynamic parameters for constitutive binary systems. Microstructure and phase composition of the selected alloy samples were analyzed using light microscopy, scanning electron microscopy combined with energy-dispersive spectrometry and x-ray powder diffraction technique. The obtained experimental results were found to be in a close agreement with the predicted phase equilibria. Hardness and electrical conductivity of the alloy samples from four vertical sections Al-Ag80Ga20, Al-Ag60Ga40, Ag-Al80Ga20 and Ag-Al60Ga40 of the ternary Al-Ag-Ga system at 200 degrees C were experimentally determined using Brinell method and eddy current measurements. Additionally, hardness of the individual phases present in the microstructure of the studied alloy samples was determined using Vickers microhardness test. Based on experimentally obtained results, isolines of Brinell hardness and electrical conductivity were calculated for the alloys from isothermal section of the ternary Al-Ag-Ga system at 200 degrees C.",
publisher = "Springer, New York",
journal = "Journal of Materials Engineering and Performance",
title = "Determination of 200 degrees C Isothermal Section of Al-Ag-Ga Phase Diagram by Microanalysis, X-ray Diffraction, Hardness and Electrical Conductivity Measurements",
volume = "26",
number = "6",
pages = "2491-2501",
doi = "10.1007/s11665-017-2689-4"
}

Premović, M., Tomović, M., Minić, D., Manasijević, D., Živković, D., Ćosović, V., Grkovic, V.,& Đorđevic, A.. (2017). Determination of 200 degrees C Isothermal Section of Al-Ag-Ga Phase Diagram by Microanalysis, X-ray Diffraction, Hardness and Electrical Conductivity Measurements. in Journal of Materials Engineering and Performance
Springer, New York., 26(6), 2491-2501.
https://doi.org/10.1007/s11665-017-2689-4

Premović M, Tomović M, Minić D, Manasijević D, Živković D, Ćosović V, Grkovic V, Đorđevic A. Determination of 200 degrees C Isothermal Section of Al-Ag-Ga Phase Diagram by Microanalysis, X-ray Diffraction, Hardness and Electrical Conductivity Measurements. in Journal of Materials Engineering and Performance. 2017;26(6):2491-2501.
doi:10.1007/s11665-017-2689-4 .

Premović, Milena, Tomović, Milica, Minić, Duško, Manasijević, Dragan, Živković, Dragana, Ćosović, Vladan, Grkovic, Vladan, Đorđevic, Aleksandar, "Determination of 200 degrees C Isothermal Section of Al-Ag-Ga Phase Diagram by Microanalysis, X-ray Diffraction, Hardness and Electrical Conductivity Measurements" in Journal of Materials Engineering and Performance, 26, no. 6 (2017):2491-2501,
https://doi.org/10.1007/s11665-017-2689-4 . .

TY  - JOUR
AU  - Premović, Milena
AU  - Broz, Pavel
AU  - Minić, Duško
AU  - Manasijević, Dragan
AU  - Živković, Dragana
AU  - Ćosović, Vladan
AU  - Đorđevic, Aleksandar
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1948
AB  - Ternary Al-Ag-Ga system was assessed both theoretically using thermodynamic calculations of phase equilibria based on CALPHAD method and experimentally using differential thermal analysis (DTA), scanning electron microscopy (SEM) combined with energy dispersive spectrometry (EDS) and X-ray powder diffraction (XRD) analysis. The calculated phase transition temperatures, isothermal sections at 300 and 500 degrees C and liquidus surface projection were experimentally validated by experimental study of selected long-term annealed alloy samples with overall compositions along four vertical sections Al-Ag80Ga20, Al-Ag60Ga40, Ag-Al80Ga20 and Ag-Al60Ga40.
PB  - Elsevier
T2  - Thermochimica Acta
T1  - Thermodynamic assessment and experimental study of the Al-Ag-Ga phase diagram
VL  - 646
SP  - 39
EP  - 48
DO  - 10.1016/j.tca.2016.11.005
ER  - 

@article{
author = "Premović, Milena and Broz, Pavel and Minić, Duško and Manasijević, Dragan and Živković, Dragana and Ćosović, Vladan and Đorđevic, Aleksandar",
year = "2016",
abstract = "Ternary Al-Ag-Ga system was assessed both theoretically using thermodynamic calculations of phase equilibria based on CALPHAD method and experimentally using differential thermal analysis (DTA), scanning electron microscopy (SEM) combined with energy dispersive spectrometry (EDS) and X-ray powder diffraction (XRD) analysis. The calculated phase transition temperatures, isothermal sections at 300 and 500 degrees C and liquidus surface projection were experimentally validated by experimental study of selected long-term annealed alloy samples with overall compositions along four vertical sections Al-Ag80Ga20, Al-Ag60Ga40, Ag-Al80Ga20 and Ag-Al60Ga40.",
publisher = "Elsevier",
journal = "Thermochimica Acta",
title = "Thermodynamic assessment and experimental study of the Al-Ag-Ga phase diagram",
volume = "646",
pages = "39-48",
doi = "10.1016/j.tca.2016.11.005"
}

Premović, M., Broz, P., Minić, D., Manasijević, D., Živković, D., Ćosović, V.,& Đorđevic, A.. (2016). Thermodynamic assessment and experimental study of the Al-Ag-Ga phase diagram. in Thermochimica Acta
Elsevier., 646, 39-48.
https://doi.org/10.1016/j.tca.2016.11.005

Premović M, Broz P, Minić D, Manasijević D, Živković D, Ćosović V, Đorđevic A. Thermodynamic assessment and experimental study of the Al-Ag-Ga phase diagram. in Thermochimica Acta. 2016;646:39-48.
doi:10.1016/j.tca.2016.11.005 .

Premović, Milena, Broz, Pavel, Minić, Duško, Manasijević, Dragan, Živković, Dragana, Ćosović, Vladan, Đorđevic, Aleksandar, "Thermodynamic assessment and experimental study of the Al-Ag-Ga phase diagram" in Thermochimica Acta, 646 (2016):39-48,
https://doi.org/10.1016/j.tca.2016.11.005 . .

TY  - JOUR
AU  - Živković, Dragana
AU  - Balanović, Ljubiša
AU  - Mitovski, Aleksandra
AU  - Talijan, Nadežda M.
AU  - Štrbac, Nada
AU  - Sokić, Miroslav
AU  - Manasijević, Dragan
AU  - Minić, Duško
AU  - Ćosović, Vladan
PY  - 2016
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1991
AB  - Editorial board of the 'Recycling and Sustainable Development' Journal in agreement with the authors of the article titled 'Nanomaterials environmental risks and recycling - actual issues' (D. Zivkovic, Lj. Balanović, A. Mitovski, N. Talijan, N. Strbac , M. Sokić, D. Manasijević, D. Minić, V. Ćosović), which was published in this journal vol. 7 in 2014 (p. 1-8), made the decision to do correction of article because of a perceived serious oversights (based on check out by CEON). Oversight is reflected in inadequate citing a reference, or omission of reference from which the text used by individual states, as well as the duplication of certain references. The necessary correction refers to the parts of the article which reference source is not adequately specified and updates the list of references, in accordance with prescribed procedure.
AB  - Uredništvo časopisa 'Reciklaža i održivi razvoj' je u dogovoru sa autorskim timom preglednog rada pod nazivom ' EKološki rizici i reciklaža nanomaterijala - aktuelna pitanja ' (D. Živković, Lj. Balanović, A. Mitovski, N. Talijan, N. Štrbac, M. Sokić, D. Manasijević, D. Minić, V. Ćosović), koji je publikovan u ovom časopisu vol.7 iz 2014. godine (str.1-8), donelo odluku da se zbog uočenog ozbiljnog previda (na osnovu provere CEON-a), koji se ogleda u neadekvatnom citiranju jedne reference, odnosno izostavljanju reference iz koje su korišćeni pojedini tekstualni navodi, kao i dupliranja pojedinih referenci, izvrši neophodna ispravka onih delova rada u kome pomenuti referentni izvor nije adekvatno naveden, kao i ispravke u listi referenci, a u skladu sa propisanom procedurom.
PB  - University of Belgrade, Technical Faculty in Bor
T2  - Recycling and Sustainable Development
T1  - Correction: Nanomaterials environmental risks and recycling: Actual issues (2014, vol. 7, p. 1)
T1  - Ispravka: Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja (2014, vol. 7, p. 1)
VL  - 9
IS  - 1
SP  - 1
EP  - 4
DO  - 10.5937/ror1601001Z
ER  - 

@article{
author = "Živković, Dragana and Balanović, Ljubiša and Mitovski, Aleksandra and Talijan, Nadežda M. and Štrbac, Nada and Sokić, Miroslav and Manasijević, Dragan and Minić, Duško and Ćosović, Vladan",
year = "2016",
abstract = "Editorial board of the 'Recycling and Sustainable Development' Journal in agreement with the authors of the article titled 'Nanomaterials environmental risks and recycling - actual issues' (D. Zivkovic, Lj. Balanović, A. Mitovski, N. Talijan, N. Strbac , M. Sokić, D. Manasijević, D. Minić, V. Ćosović), which was published in this journal vol. 7 in 2014 (p. 1-8), made the decision to do correction of article because of a perceived serious oversights (based on check out by CEON). Oversight is reflected in inadequate citing a reference, or omission of reference from which the text used by individual states, as well as the duplication of certain references. The necessary correction refers to the parts of the article which reference source is not adequately specified and updates the list of references, in accordance with prescribed procedure., Uredništvo časopisa 'Reciklaža i održivi razvoj' je u dogovoru sa autorskim timom preglednog rada pod nazivom ' EKološki rizici i reciklaža nanomaterijala - aktuelna pitanja ' (D. Živković, Lj. Balanović, A. Mitovski, N. Talijan, N. Štrbac, M. Sokić, D. Manasijević, D. Minić, V. Ćosović), koji je publikovan u ovom časopisu vol.7 iz 2014. godine (str.1-8), donelo odluku da se zbog uočenog ozbiljnog previda (na osnovu provere CEON-a), koji se ogleda u neadekvatnom citiranju jedne reference, odnosno izostavljanju reference iz koje su korišćeni pojedini tekstualni navodi, kao i dupliranja pojedinih referenci, izvrši neophodna ispravka onih delova rada u kome pomenuti referentni izvor nije adekvatno naveden, kao i ispravke u listi referenci, a u skladu sa propisanom procedurom.",
publisher = "University of Belgrade, Technical Faculty in Bor",
journal = "Recycling and Sustainable Development",
title = "Correction: Nanomaterials environmental risks and recycling: Actual issues (2014, vol. 7, p. 1), Ispravka: Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja (2014, vol. 7, p. 1)",
volume = "9",
number = "1",
pages = "1-4",
doi = "10.5937/ror1601001Z"
}

Živković, D., Balanović, L., Mitovski, A., Talijan, N. M., Štrbac, N., Sokić, M., Manasijević, D., Minić, D.,& Ćosović, V.. (2016). Correction: Nanomaterials environmental risks and recycling: Actual issues (2014, vol. 7, p. 1). in Recycling and Sustainable Development
University of Belgrade, Technical Faculty in Bor., 9(1), 1-4.
https://doi.org/10.5937/ror1601001Z

Živković D, Balanović L, Mitovski A, Talijan NM, Štrbac N, Sokić M, Manasijević D, Minić D, Ćosović V. Correction: Nanomaterials environmental risks and recycling: Actual issues (2014, vol. 7, p. 1). in Recycling and Sustainable Development. 2016;9(1):1-4.
doi:10.5937/ror1601001Z .

Živković, Dragana, Balanović, Ljubiša, Mitovski, Aleksandra, Talijan, Nadežda M., Štrbac, Nada, Sokić, Miroslav, Manasijević, Dragan, Minić, Duško, Ćosović, Vladan, "Correction: Nanomaterials environmental risks and recycling: Actual issues (2014, vol. 7, p. 1)" in Recycling and Sustainable Development, 9, no. 1 (2016):1-4,
https://doi.org/10.5937/ror1601001Z . .

TY  - JOUR
AU  - Ćosović, Vladan
AU  - Minić, Duško
AU  - Manasijević, Dragan
AU  - Premović, Milena
AU  - Dervisevic, Irma
AU  - Živković, Dragana
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1742
AB  - Phase diagram of the Ag-Ga-Zn ternary system was investigated using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and X-ray powder diffraction (XRD) methods. Experimentally obtained results were compared with the results of thermodynamic calculation of phase equilibria based on calculation of phase diagram (CALPHAD) method and literature data. Phase transition temperatures of alloys with overall compositions along three selected vertical sections Ag-Ga50Zn50, Ga-Ag50Zn50 and Zn-Ag50Ga50 were measured by DTA. Liquidus temperatures were experimentally determined and compared with the results of thermodynamic calculations. Identification of coexisting phases in the samples equilibrated at 300 degrees C and 400 degrees C was carried out using SEM-EDS and XRD methods. Obtained results were compared with the calculated isothermal sections of the Ag-Ga-Zn ternary system at corresponding temperatures. Calculated liquidus projection and invariant equilibria of the Ag-Ga-Zn ternary system were presented.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - Experimental investigation and thermodynamic calculations of the Ag-Ga-Zn phase diagram
VL  - 632
SP  - 783
EP  - 793
DO  - 10.1016/j.jallcom.2015.01.181
ER  - 

@article{
author = "Ćosović, Vladan and Minić, Duško and Manasijević, Dragan and Premović, Milena and Dervisevic, Irma and Živković, Dragana",
year = "2015",
abstract = "Phase diagram of the Ag-Ga-Zn ternary system was investigated using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and X-ray powder diffraction (XRD) methods. Experimentally obtained results were compared with the results of thermodynamic calculation of phase equilibria based on calculation of phase diagram (CALPHAD) method and literature data. Phase transition temperatures of alloys with overall compositions along three selected vertical sections Ag-Ga50Zn50, Ga-Ag50Zn50 and Zn-Ag50Ga50 were measured by DTA. Liquidus temperatures were experimentally determined and compared with the results of thermodynamic calculations. Identification of coexisting phases in the samples equilibrated at 300 degrees C and 400 degrees C was carried out using SEM-EDS and XRD methods. Obtained results were compared with the calculated isothermal sections of the Ag-Ga-Zn ternary system at corresponding temperatures. Calculated liquidus projection and invariant equilibria of the Ag-Ga-Zn ternary system were presented.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "Experimental investigation and thermodynamic calculations of the Ag-Ga-Zn phase diagram",
volume = "632",
pages = "783-793",
doi = "10.1016/j.jallcom.2015.01.181"
}

Ćosović, V., Minić, D., Manasijević, D., Premović, M., Dervisevic, I.,& Živković, D.. (2015). Experimental investigation and thermodynamic calculations of the Ag-Ga-Zn phase diagram. in Journal of Alloys and Compounds
Elsevier., 632, 783-793.
https://doi.org/10.1016/j.jallcom.2015.01.181

Ćosović V, Minić D, Manasijević D, Premović M, Dervisevic I, Živković D. Experimental investigation and thermodynamic calculations of the Ag-Ga-Zn phase diagram. in Journal of Alloys and Compounds. 2015;632:783-793.
doi:10.1016/j.jallcom.2015.01.181 .

Ćosović, Vladan, Minić, Duško, Manasijević, Dragan, Premović, Milena, Dervisevic, Irma, Živković, Dragana, "Experimental investigation and thermodynamic calculations of the Ag-Ga-Zn phase diagram" in Journal of Alloys and Compounds, 632 (2015):783-793,
https://doi.org/10.1016/j.jallcom.2015.01.181 . .

TY  - JOUR
AU  - Gomidzelovic, L
AU  - Živković, Dragana
AU  - Talijan, Nadežda M.
AU  - Ćosović, Vladan
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1806
AB  - The results of experimental investigation of some thermal, structural, mechanical and electrical properties of selected alloys in the In-Ga70Au10Sb20 cross-section of Au-Ga-In-Sb system are presented in this paper. Applied experimental techniques included: differential scanning calorimetry, light optical microscopy, scanning electron microscopy with energy dispersive spectroscopy, hardness, microhardness and electrical conductivity measurements.
PB  - Maney Publishing, Leeds
T2  - Materials Research Innovations
T1  - Properties of new gold based multicomponent alloys as innovative lead-free solder material
VL  - 19
IS  - 2
SP  - 145
EP  - 149
DO  - 10.1179/1433075X14Y.0000000230
ER  - 

@article{
author = "Gomidzelovic, L and Živković, Dragana and Talijan, Nadežda M. and Ćosović, Vladan",
year = "2015",
abstract = "The results of experimental investigation of some thermal, structural, mechanical and electrical properties of selected alloys in the In-Ga70Au10Sb20 cross-section of Au-Ga-In-Sb system are presented in this paper. Applied experimental techniques included: differential scanning calorimetry, light optical microscopy, scanning electron microscopy with energy dispersive spectroscopy, hardness, microhardness and electrical conductivity measurements.",
publisher = "Maney Publishing, Leeds",
journal = "Materials Research Innovations",
title = "Properties of new gold based multicomponent alloys as innovative lead-free solder material",
volume = "19",
number = "2",
pages = "145-149",
doi = "10.1179/1433075X14Y.0000000230"
}

Gomidzelovic, L., Živković, D., Talijan, N. M.,& Ćosović, V.. (2015). Properties of new gold based multicomponent alloys as innovative lead-free solder material. in Materials Research Innovations
Maney Publishing, Leeds., 19(2), 145-149.
https://doi.org/10.1179/1433075X14Y.0000000230

Gomidzelovic L, Živković D, Talijan NM, Ćosović V. Properties of new gold based multicomponent alloys as innovative lead-free solder material. in Materials Research Innovations. 2015;19(2):145-149.
doi:10.1179/1433075X14Y.0000000230 .

Gomidzelovic, L, Živković, Dragana, Talijan, Nadežda M., Ćosović, Vladan, "Properties of new gold based multicomponent alloys as innovative lead-free solder material" in Materials Research Innovations, 19, no. 2 (2015):145-149,
https://doi.org/10.1179/1433075X14Y.0000000230 . .

TY  - JOUR
AU  - Živković, Dragana
AU  - Niculovic, Milica
AU  - Manasijević, Dragan
AU  - Minić, Duško
AU  - Ćosović, Vladan
AU  - Sibinovic, Maja
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1718
AB  - This paper presents an overview of current situation in nano-alloys investigations based on bibliometric and patent analysis. Bibliometric analysis data, for the period 2000 to 2013, were obtained using Scopus database as selected index database, whereas analyzed parameters were: number of scientific papers per year, authors, countries, affiliations, subject areas and document types. Analysis of nano-alloys patents was done with specific database, using the International Patent Classification and Patent Scope for the period 2003 to 2013. Information found in this database was the number of patents, patent classification by country, patent applicators, main inventors and publication date.
PB  - Bentham Science Publ Ltd, Sharjah
T2  - Recent Patents on Nanotechnology
T1  - Bibliometric Trend and Patent Analysis in Nano-Alloys Research for Period 2000-2013
VL  - 9
IS  - 2
SP  - 126
EP  - 138
DO  - 10.2174/1872210509666150504141512
ER  - 

@article{
author = "Živković, Dragana and Niculovic, Milica and Manasijević, Dragan and Minić, Duško and Ćosović, Vladan and Sibinovic, Maja",
year = "2015",
abstract = "This paper presents an overview of current situation in nano-alloys investigations based on bibliometric and patent analysis. Bibliometric analysis data, for the period 2000 to 2013, were obtained using Scopus database as selected index database, whereas analyzed parameters were: number of scientific papers per year, authors, countries, affiliations, subject areas and document types. Analysis of nano-alloys patents was done with specific database, using the International Patent Classification and Patent Scope for the period 2003 to 2013. Information found in this database was the number of patents, patent classification by country, patent applicators, main inventors and publication date.",
publisher = "Bentham Science Publ Ltd, Sharjah",
journal = "Recent Patents on Nanotechnology",
title = "Bibliometric Trend and Patent Analysis in Nano-Alloys Research for Period 2000-2013",
volume = "9",
number = "2",
pages = "126-138",
doi = "10.2174/1872210509666150504141512"
}

Živković, D., Niculovic, M., Manasijević, D., Minić, D., Ćosović, V.,& Sibinovic, M.. (2015). Bibliometric Trend and Patent Analysis in Nano-Alloys Research for Period 2000-2013. in Recent Patents on Nanotechnology
Bentham Science Publ Ltd, Sharjah., 9(2), 126-138.
https://doi.org/10.2174/1872210509666150504141512

Živković D, Niculovic M, Manasijević D, Minić D, Ćosović V, Sibinovic M. Bibliometric Trend and Patent Analysis in Nano-Alloys Research for Period 2000-2013. in Recent Patents on Nanotechnology. 2015;9(2):126-138.
doi:10.2174/1872210509666150504141512 .

Živković, Dragana, Niculovic, Milica, Manasijević, Dragan, Minić, Duško, Ćosović, Vladan, Sibinovic, Maja, "Bibliometric Trend and Patent Analysis in Nano-Alloys Research for Period 2000-2013" in Recent Patents on Nanotechnology, 9, no. 2 (2015):126-138,
https://doi.org/10.2174/1872210509666150504141512 . .

TY  - JOUR
AU  - Minić, Duško
AU  - Premović, Milena
AU  - Manasijević, Dragan
AU  - Ćosović, Vladan
AU  - Živković, Dragana
AU  - Markovic, Aleksandar
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1716
AB  - Phase diagram of the Ag-Bi-Ga ternary system was investigated using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and x-ray powder diffraction (XRD) methods. Experimentally obtained results were compared with the results of thermodynamic prediction of phase equilibria based on calculation of phase diagram (CALPHAD) method. Phase transition temperatures of alloys with overall compositions along three selected vertical sections Ag-Bi50Ga50, Bi-Ag50Ga50 and Ga-Ag50Bi50 were measured by DTA. Liquidus temperatures were experimentally determined and compared with the results of thermodynamic calculation. Identification of coexisting phases in samples equilibrated at 200 degrees C was carried out using SEM-EDS and XRD methods. Obtained results were compared with the calculated isothermal section of the Ag-Bi-Ga ternary system at corresponding temperature. Calculated liquidus projection and invariant equilibria of the Ag-Bi-Ga ternary system were presented. The obtained values were found to be in a close agreement.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - Experimental investigation and thermodynamic calculations of the Ag-Bi-Ga phase diagram
VL  - 646
SP  - 461
EP  - 471
DO  - 10.1016/j.jallcom.2015.05.163
ER  - 

@article{
author = "Minić, Duško and Premović, Milena and Manasijević, Dragan and Ćosović, Vladan and Živković, Dragana and Markovic, Aleksandar",
year = "2015",
abstract = "Phase diagram of the Ag-Bi-Ga ternary system was investigated using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and x-ray powder diffraction (XRD) methods. Experimentally obtained results were compared with the results of thermodynamic prediction of phase equilibria based on calculation of phase diagram (CALPHAD) method. Phase transition temperatures of alloys with overall compositions along three selected vertical sections Ag-Bi50Ga50, Bi-Ag50Ga50 and Ga-Ag50Bi50 were measured by DTA. Liquidus temperatures were experimentally determined and compared with the results of thermodynamic calculation. Identification of coexisting phases in samples equilibrated at 200 degrees C was carried out using SEM-EDS and XRD methods. Obtained results were compared with the calculated isothermal section of the Ag-Bi-Ga ternary system at corresponding temperature. Calculated liquidus projection and invariant equilibria of the Ag-Bi-Ga ternary system were presented. The obtained values were found to be in a close agreement.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "Experimental investigation and thermodynamic calculations of the Ag-Bi-Ga phase diagram",
volume = "646",
pages = "461-471",
doi = "10.1016/j.jallcom.2015.05.163"
}

Minić, D., Premović, M., Manasijević, D., Ćosović, V., Živković, D.,& Markovic, A.. (2015). Experimental investigation and thermodynamic calculations of the Ag-Bi-Ga phase diagram. in Journal of Alloys and Compounds
Elsevier., 646, 461-471.
https://doi.org/10.1016/j.jallcom.2015.05.163

Minić D, Premović M, Manasijević D, Ćosović V, Živković D, Markovic A. Experimental investigation and thermodynamic calculations of the Ag-Bi-Ga phase diagram. in Journal of Alloys and Compounds. 2015;646:461-471.
doi:10.1016/j.jallcom.2015.05.163 .

Minić, Duško, Premović, Milena, Manasijević, Dragan, Ćosović, Vladan, Živković, Dragana, Markovic, Aleksandar, "Experimental investigation and thermodynamic calculations of the Ag-Bi-Ga phase diagram" in Journal of Alloys and Compounds, 646 (2015):461-471,
https://doi.org/10.1016/j.jallcom.2015.05.163 . .

TY  - JOUR
AU  - Premović, Milena
AU  - Minić, Duško
AU  - Manasijević, Dragan
AU  - Ćosović, Vladan
AU  - Živković, Dragana
AU  - Dervisevic, Irma
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1664
AB  - Phase diagram of the Bi-In-Ni ternary system was investigated using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and X-ray powder diffraction (XRD) analysis. Experimentally obtained results were compared with the results of thermodynamic calculation of phase equilibria based on calculation of phase diagram (CALPHAD) method and literature data. Phase transition temperatures of alloys with overall compositions along three selected vertical sections In-Bi0.8Ni0.2, x(Bi) = 0.6 and Bi-In0.5Ni0.5 were measured by DTA. Liquidus temperatures were experimentally determined and compared with the results of thermodynamic calculation. Identification of coexisting phases in samples equilibrated at 100 degrees C, 300 degrees C and 350 degrees C was carried out using SEM-EDS and XRD methods. The obtained results were compared with the calculated isothermal sections of the Bi-In-Ni ternary system at corresponding temperatures. Calculated liquidus projection and invariant equilibria of the Bi-In-Ni ternary.system were presented.
PB  - Elsevier
T2  - Thermochimica Acta
T1  - Experimental investigation and thermodynamic calculations of the Bi-In-Ni phase diagram
VL  - 609
SP  - 61
EP  - 74
DO  - 10.1016/j.tca.2015.02.022
ER  - 

@article{
author = "Premović, Milena and Minić, Duško and Manasijević, Dragan and Ćosović, Vladan and Živković, Dragana and Dervisevic, Irma",
year = "2015",
abstract = "Phase diagram of the Bi-In-Ni ternary system was investigated using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and X-ray powder diffraction (XRD) analysis. Experimentally obtained results were compared with the results of thermodynamic calculation of phase equilibria based on calculation of phase diagram (CALPHAD) method and literature data. Phase transition temperatures of alloys with overall compositions along three selected vertical sections In-Bi0.8Ni0.2, x(Bi) = 0.6 and Bi-In0.5Ni0.5 were measured by DTA. Liquidus temperatures were experimentally determined and compared with the results of thermodynamic calculation. Identification of coexisting phases in samples equilibrated at 100 degrees C, 300 degrees C and 350 degrees C was carried out using SEM-EDS and XRD methods. The obtained results were compared with the calculated isothermal sections of the Bi-In-Ni ternary system at corresponding temperatures. Calculated liquidus projection and invariant equilibria of the Bi-In-Ni ternary.system were presented.",
publisher = "Elsevier",
journal = "Thermochimica Acta",
title = "Experimental investigation and thermodynamic calculations of the Bi-In-Ni phase diagram",
volume = "609",
pages = "61-74",
doi = "10.1016/j.tca.2015.02.022"
}

Premović, M., Minić, D., Manasijević, D., Ćosović, V., Živković, D.,& Dervisevic, I.. (2015). Experimental investigation and thermodynamic calculations of the Bi-In-Ni phase diagram. in Thermochimica Acta
Elsevier., 609, 61-74.
https://doi.org/10.1016/j.tca.2015.02.022

Premović M, Minić D, Manasijević D, Ćosović V, Živković D, Dervisevic I. Experimental investigation and thermodynamic calculations of the Bi-In-Ni phase diagram. in Thermochimica Acta. 2015;609:61-74.
doi:10.1016/j.tca.2015.02.022 .

Premović, Milena, Minić, Duško, Manasijević, Dragan, Ćosović, Vladan, Živković, Dragana, Dervisevic, Irma, "Experimental investigation and thermodynamic calculations of the Bi-In-Ni phase diagram" in Thermochimica Acta, 609 (2015):61-74,
https://doi.org/10.1016/j.tca.2015.02.022 . .

TY  - JOUR
AU  - Gomidzelovic, Lidija
AU  - Živković, Dragana
AU  - Pozega, Emina
AU  - Ćosović, Vladan
AU  - Balanović, Ljubiša
AU  - Manasijević, Dragan
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1712
AB  - In this publication, results are presented which have been obtained by investigation of mechanical and electrical properties of alloys belonging to Sb-Ga50Au10In40 section of quaternary Au-Ga-In-Sb system, which is the basis for the development of new lead-free solder materials. The experiments were conducted using Brinell method for hardness measurement, apparatus PTM-3 for microhardness measurement and instrument Foerster SIGMATEST 2.069 for measuring of electrical conductivity. The microstructure of samples was analyzed using optical microscopy.
PB  - Carl Hanser Verlag, Munich
T2  - Materials Testing
T1  - Mechanical and electrical properties of Sb-Ga50Au10In40 alloys
VL  - 57
IS  - 9
SP  - 807
EP  - 810
DO  - 10.3139/120.110780
ER  - 

@article{
author = "Gomidzelovic, Lidija and Živković, Dragana and Pozega, Emina and Ćosović, Vladan and Balanović, Ljubiša and Manasijević, Dragan",
year = "2015",
abstract = "In this publication, results are presented which have been obtained by investigation of mechanical and electrical properties of alloys belonging to Sb-Ga50Au10In40 section of quaternary Au-Ga-In-Sb system, which is the basis for the development of new lead-free solder materials. The experiments were conducted using Brinell method for hardness measurement, apparatus PTM-3 for microhardness measurement and instrument Foerster SIGMATEST 2.069 for measuring of electrical conductivity. The microstructure of samples was analyzed using optical microscopy.",
publisher = "Carl Hanser Verlag, Munich",
journal = "Materials Testing",
title = "Mechanical and electrical properties of Sb-Ga50Au10In40 alloys",
volume = "57",
number = "9",
pages = "807-810",
doi = "10.3139/120.110780"
}

Gomidzelovic, L., Živković, D., Pozega, E., Ćosović, V., Balanović, L.,& Manasijević, D.. (2015). Mechanical and electrical properties of Sb-Ga50Au10In40 alloys. in Materials Testing
Carl Hanser Verlag, Munich., 57(9), 807-810.
https://doi.org/10.3139/120.110780

Gomidzelovic L, Živković D, Pozega E, Ćosović V, Balanović L, Manasijević D. Mechanical and electrical properties of Sb-Ga50Au10In40 alloys. in Materials Testing. 2015;57(9):807-810.
doi:10.3139/120.110780 .

Gomidzelovic, Lidija, Živković, Dragana, Pozega, Emina, Ćosović, Vladan, Balanović, Ljubiša, Manasijević, Dragan, "Mechanical and electrical properties of Sb-Ga50Au10In40 alloys" in Materials Testing, 57, no. 9 (2015):807-810,
https://doi.org/10.3139/120.110780 . .

TY  - JOUR
AU  - Gomidlelovic, L
AU  - Živković, Dragana
AU  - Talijan, Nadežda M.
AU  - Ćosović, Vladan
AU  - Balanović, Ljubiša
AU  - Pozega, E
AU  - Mitovski, A
AU  - Marjanovic, B
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1709
AB  - The materials based on gallium-antimonide are widely used in electronic industry in the production of various electronic devices. The results of characterization of selected alloys in the Ga-InSb system obtained by experimental investigation of some thermal, structural, mechanical and electrical properties are presented in this paper. Applied experimental techniques included: differential thermal analysis, light optical microscopy, scanning electron microscopy with EDX, hardness, micro hardness and electrical conductivity measurements.
PB  - National Institute of Optoelectronics
T2  - Optoelectronics and Advanced Materials, Rapid Communications
T1  - Characterization of the Ga-InSb system: experimental investigation of thermal, structural, mechanical and electrical properties
VL  - 9
IS  - 7-8
SP  - 965
EP  - 968
UR  - https://hdl.handle.net/21.15107/rcub_cer_1709
ER  - 

@article{
author = "Gomidlelovic, L and Živković, Dragana and Talijan, Nadežda M. and Ćosović, Vladan and Balanović, Ljubiša and Pozega, E and Mitovski, A and Marjanovic, B",
year = "2015",
abstract = "The materials based on gallium-antimonide are widely used in electronic industry in the production of various electronic devices. The results of characterization of selected alloys in the Ga-InSb system obtained by experimental investigation of some thermal, structural, mechanical and electrical properties are presented in this paper. Applied experimental techniques included: differential thermal analysis, light optical microscopy, scanning electron microscopy with EDX, hardness, micro hardness and electrical conductivity measurements.",
publisher = "National Institute of Optoelectronics",
journal = "Optoelectronics and Advanced Materials, Rapid Communications",
title = "Characterization of the Ga-InSb system: experimental investigation of thermal, structural, mechanical and electrical properties",
volume = "9",
number = "7-8",
pages = "965-968",
url = "https://hdl.handle.net/21.15107/rcub_cer_1709"
}

Gomidlelovic, L., Živković, D., Talijan, N. M., Ćosović, V., Balanović, L., Pozega, E., Mitovski, A.,& Marjanovic, B.. (2015). Characterization of the Ga-InSb system: experimental investigation of thermal, structural, mechanical and electrical properties. in Optoelectronics and Advanced Materials, Rapid Communications
National Institute of Optoelectronics., 9(7-8), 965-968.
https://hdl.handle.net/21.15107/rcub_cer_1709

Gomidlelovic L, Živković D, Talijan NM, Ćosović V, Balanović L, Pozega E, Mitovski A, Marjanovic B. Characterization of the Ga-InSb system: experimental investigation of thermal, structural, mechanical and electrical properties. in Optoelectronics and Advanced Materials, Rapid Communications. 2015;9(7-8):965-968.
https://hdl.handle.net/21.15107/rcub_cer_1709 .

Gomidlelovic, L, Živković, Dragana, Talijan, Nadežda M., Ćosović, Vladan, Balanović, Ljubiša, Pozega, E, Mitovski, A, Marjanovic, B, "Characterization of the Ga-InSb system: experimental investigation of thermal, structural, mechanical and electrical properties" in Optoelectronics and Advanced Materials, Rapid Communications, 9, no. 7-8 (2015):965-968,
https://hdl.handle.net/21.15107/rcub_cer_1709 .

TY  - JOUR
AU  - Markovic, B.
AU  - Živković, Dragana
AU  - Manasijević, Dragan
AU  - Sokic, M.
AU  - Minic, D.
AU  - Talijan, Nadežda M.
AU  - Stajić-Trošić, Jasna
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1514
AB  - The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.
PB  - Polish Acad Sciences Committee Metallurgy, Krakow
T2  - Archives of Metallurgy and Materials
T1  - Thermal, structural and electrical properties of some bi-cu-ni alloys
VL  - 59
IS  - 1
SP  - 117
EP  - 120
DO  - 10.2478/amm-2014-0018
ER  - 

@article{
author = "Markovic, B. and Živković, Dragana and Manasijević, Dragan and Sokic, M. and Minic, D. and Talijan, Nadežda M. and Stajić-Trošić, Jasna",
year = "2014",
abstract = "The Bi-Cu-Ni ternary system belongs to the group of potential Cu-Ni-based advanced lead-free solder materials for high temperature application. In this study microstructure investigation of the slow-cooled Bi-Cu-Ni samples was done using SEM-EDS analysis. The samples compositions were chosen along three cross-sections with molar ratio Cu:Ni=1:3, 1:1 and 3:1. The experimentally obtained phase structure was compared with the results of thermodynamic calculation according to CALPHAD method. Also, new results regarding thermal and electrical properties investigations of these alloys are presented in this paper, based on DSC and electroconductivity measurements.",
publisher = "Polish Acad Sciences Committee Metallurgy, Krakow",
journal = "Archives of Metallurgy and Materials",
title = "Thermal, structural and electrical properties of some bi-cu-ni alloys",
volume = "59",
number = "1",
pages = "117-120",
doi = "10.2478/amm-2014-0018"
}

Markovic, B., Živković, D., Manasijević, D., Sokic, M., Minic, D., Talijan, N. M.,& Stajić-Trošić, J.. (2014). Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials
Polish Acad Sciences Committee Metallurgy, Krakow., 59(1), 117-120.
https://doi.org/10.2478/amm-2014-0018

Markovic B, Živković D, Manasijević D, Sokic M, Minic D, Talijan NM, Stajić-Trošić J. Thermal, structural and electrical properties of some bi-cu-ni alloys. in Archives of Metallurgy and Materials. 2014;59(1):117-120.
doi:10.2478/amm-2014-0018 .

Markovic, B., Živković, Dragana, Manasijević, Dragan, Sokic, M., Minic, D., Talijan, Nadežda M., Stajić-Trošić, Jasna, "Thermal, structural and electrical properties of some bi-cu-ni alloys" in Archives of Metallurgy and Materials, 59, no. 1 (2014):117-120,
https://doi.org/10.2478/amm-2014-0018 . .

TY  - JOUR
AU  - Živković, Dragana
AU  - Balanović, Ljubiša
AU  - Mitovski, Aleksandra
AU  - Talijan, Nadežda M.
AU  - Štrbac, Nada
AU  - Sokić, Miroslav
AU  - Manasijević, Dragan
AU  - Minić, Duško
AU  - Ćosović, Vladan
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1460
AB  - Nanotechnologies are being spoken of as the driving force behind a new industrial revolution. Nanoscience has matured significantly during the last decade as it has transitioned from bench top science to applied technology. Presently, nanomaterials are used in a wide variety of commercial products such as electronic components, sports equipment, sun creams and biomedical applications. The size of nanoparticles allows them to interact strongly with biological structures, so they present potential human and environmental health risk. Nanometer size presents also a problem for separation, recovery, and reuse of the particulate matter. Therefore, industrial-scale manufacturing and use of nanomaterials could have strong impact on human health and the environment or the problematic of nanomaterials recycling. The catch-all term ''nanotechnology' is not sufficiently precise for risk governance and risk management purposes. The estimation of possible risks depends on a consideration of the life cycle of the material being produced, which involves understanding the processes and materials used in manufacture, the likely interactions between the product and individuals or the environment during its manufacture and useful life, and the methods used in its eventual disposal. From a risk-control point of view it will be necessary to systematically identify those critical issues, which should be looked at in more detail. Brief review of actual trends in nanomaterials environmental risks and recycling is given in this paper.
AB  - Nanotehnologije se smatraju pokretačkom snagom nove industrijske revolucije. Nanonauka je tokom poslednje decenije značajno evoluirala od nauke koja se isključivo razvijala u laboratorijskim uslovima, do njene aplikacije u primenjenim tehnologijama. Trenutno, nanomaterijali se koriste u širokom spektru komercijalnih proizvoda kao što su elektronske komponente, sportska oprema, kreme za sunčanje i u biomedicinske svrhe. Veličina nanočestica omogućava im snažnu interakciju sa biološkim strukturama, tako da nanočestice predstavljaju potencijalni rizik po životnu sredinu i zdravlje ljudi. Nanometar kao veličina takođe predstavlja problem za separaciju, reciklažu i ponovno korišćenje nanočestica. Dakle, proizvodnja nanomaterijala u industrijskim razmerama i njihova primena mogli bi imati značajan uticaj na zdravlje ljudi i životnu sredinu ili stvorili probleme pri reciklaži. Sveobuhvatni termin 'nanotehnologija' nije dovoljno precizan kada se radi o upravljanju rizicima. Procena mogućih rizika zavisi od razmatranja životnog ciklusa materijala koji se proizvodi, a koji uključuje razumevanje procesa i materijala koji se koriste u proizvodnji, verovatne interakcije između proizvoda i pojedinaca ili životne sredine tokom proizvodnje nanomaterijala i njegovog životnog ciklusa, kao i metoda koje se koriste za njihovo konačno odlaganje. Sa stanovišta kontrole rizika, neophodno je identifikovati kritične faze, koje je neophodno detaljno istražiti. Pregled aktuelnih trendova ekoloških rizika i reciklaži nanomaterijala prezentovan je u ovom radu.
PB  - University of Belgrade, Technical Faculty in Bor
T2  - Recycling and Sustainable Development
T1  - Nanomaterials environmental risks and recycling: Actual issues
T1  - Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja
VL  - 7
IS  - 1
SP  - 1
EP  - 8
DO  - 10.5937/ror1401001Z
ER  - 

@article{
author = "Živković, Dragana and Balanović, Ljubiša and Mitovski, Aleksandra and Talijan, Nadežda M. and Štrbac, Nada and Sokić, Miroslav and Manasijević, Dragan and Minić, Duško and Ćosović, Vladan",
year = "2014",
abstract = "Nanotechnologies are being spoken of as the driving force behind a new industrial revolution. Nanoscience has matured significantly during the last decade as it has transitioned from bench top science to applied technology. Presently, nanomaterials are used in a wide variety of commercial products such as electronic components, sports equipment, sun creams and biomedical applications. The size of nanoparticles allows them to interact strongly with biological structures, so they present potential human and environmental health risk. Nanometer size presents also a problem for separation, recovery, and reuse of the particulate matter. Therefore, industrial-scale manufacturing and use of nanomaterials could have strong impact on human health and the environment or the problematic of nanomaterials recycling. The catch-all term ''nanotechnology' is not sufficiently precise for risk governance and risk management purposes. The estimation of possible risks depends on a consideration of the life cycle of the material being produced, which involves understanding the processes and materials used in manufacture, the likely interactions between the product and individuals or the environment during its manufacture and useful life, and the methods used in its eventual disposal. From a risk-control point of view it will be necessary to systematically identify those critical issues, which should be looked at in more detail. Brief review of actual trends in nanomaterials environmental risks and recycling is given in this paper., Nanotehnologije se smatraju pokretačkom snagom nove industrijske revolucije. Nanonauka je tokom poslednje decenije značajno evoluirala od nauke koja se isključivo razvijala u laboratorijskim uslovima, do njene aplikacije u primenjenim tehnologijama. Trenutno, nanomaterijali se koriste u širokom spektru komercijalnih proizvoda kao što su elektronske komponente, sportska oprema, kreme za sunčanje i u biomedicinske svrhe. Veličina nanočestica omogućava im snažnu interakciju sa biološkim strukturama, tako da nanočestice predstavljaju potencijalni rizik po životnu sredinu i zdravlje ljudi. Nanometar kao veličina takođe predstavlja problem za separaciju, reciklažu i ponovno korišćenje nanočestica. Dakle, proizvodnja nanomaterijala u industrijskim razmerama i njihova primena mogli bi imati značajan uticaj na zdravlje ljudi i životnu sredinu ili stvorili probleme pri reciklaži. Sveobuhvatni termin 'nanotehnologija' nije dovoljno precizan kada se radi o upravljanju rizicima. Procena mogućih rizika zavisi od razmatranja životnog ciklusa materijala koji se proizvodi, a koji uključuje razumevanje procesa i materijala koji se koriste u proizvodnji, verovatne interakcije između proizvoda i pojedinaca ili životne sredine tokom proizvodnje nanomaterijala i njegovog životnog ciklusa, kao i metoda koje se koriste za njihovo konačno odlaganje. Sa stanovišta kontrole rizika, neophodno je identifikovati kritične faze, koje je neophodno detaljno istražiti. Pregled aktuelnih trendova ekoloških rizika i reciklaži nanomaterijala prezentovan je u ovom radu.",
publisher = "University of Belgrade, Technical Faculty in Bor",
journal = "Recycling and Sustainable Development",
title = "Nanomaterials environmental risks and recycling: Actual issues, Ekološki rizici i reciklaža nanomaterijala - aktuelna pitanja",
volume = "7",
number = "1",
pages = "1-8",
doi = "10.5937/ror1401001Z"
}

Živković, D., Balanović, L., Mitovski, A., Talijan, N. M., Štrbac, N., Sokić, M., Manasijević, D., Minić, D.,& Ćosović, V.. (2014). Nanomaterials environmental risks and recycling: Actual issues. in Recycling and Sustainable Development
University of Belgrade, Technical Faculty in Bor., 7(1), 1-8.
https://doi.org/10.5937/ror1401001Z

Živković D, Balanović L, Mitovski A, Talijan NM, Štrbac N, Sokić M, Manasijević D, Minić D, Ćosović V. Nanomaterials environmental risks and recycling: Actual issues. in Recycling and Sustainable Development. 2014;7(1):1-8.
doi:10.5937/ror1401001Z .

Živković, Dragana, Balanović, Ljubiša, Mitovski, Aleksandra, Talijan, Nadežda M., Štrbac, Nada, Sokić, Miroslav, Manasijević, Dragan, Minić, Duško, Ćosović, Vladan, "Nanomaterials environmental risks and recycling: Actual issues" in Recycling and Sustainable Development, 7, no. 1 (2014):1-8,
https://doi.org/10.5937/ror1401001Z . .

TY  - JOUR
AU  - Premović, Milena
AU  - Minić, Duško
AU  - Ćosović, Vladan
AU  - Manasijević, Dragan
AU  - Živković, Dragana
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1419
AB  - A phase diagram of the Bi-Ge-Sb ternary system was investigated experimentally by differential thermal analysis (DTA), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), and X-ray powder diffraction (XRD) methods and theoretically by the CALPHAD method. The liquidus projection; invariant equilibria; and three vertical sections, Sb-Bi0.5Ge0.5, Ge-Bi0.5Sb0.5, and Bi-Ge0.5Sb0.5, as well as isothermal sections at 773 K and 373 K (500 A degrees C and 100 A degrees C), were predicted using optimized thermodynamic parameters for constitutive binary systems from the literature. In addition, phase transition temperatures of the selected samples with compositions along calculated isopleths were experimentally determined using DTA. Predicted isothermal sections at 773 K and 373 K (500 A degrees C and 100 A degrees C) were compared with the results of the SEM-EDS and XRD analysis from this work. In both cases, good agreement between the extrapolated phase diagram and experimental results was obtained. Alloys from the three studied vertical sections were additionally analyzed using the Brinell hardness test.
PB  - Springer, New York
T2  - Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
T1  - Experimental Investigation and Thermodynamic Calculations of the Bi-Ge-Sb Phase Diagram
IS  - 11
SP  - 4829
EP  - 4841
DO  - 10.1007/s11661-014-2445-4
ER  - 

@article{
author = "Premović, Milena and Minić, Duško and Ćosović, Vladan and Manasijević, Dragan and Živković, Dragana",
year = "2014",
abstract = "A phase diagram of the Bi-Ge-Sb ternary system was investigated experimentally by differential thermal analysis (DTA), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), and X-ray powder diffraction (XRD) methods and theoretically by the CALPHAD method. The liquidus projection; invariant equilibria; and three vertical sections, Sb-Bi0.5Ge0.5, Ge-Bi0.5Sb0.5, and Bi-Ge0.5Sb0.5, as well as isothermal sections at 773 K and 373 K (500 A degrees C and 100 A degrees C), were predicted using optimized thermodynamic parameters for constitutive binary systems from the literature. In addition, phase transition temperatures of the selected samples with compositions along calculated isopleths were experimentally determined using DTA. Predicted isothermal sections at 773 K and 373 K (500 A degrees C and 100 A degrees C) were compared with the results of the SEM-EDS and XRD analysis from this work. In both cases, good agreement between the extrapolated phase diagram and experimental results was obtained. Alloys from the three studied vertical sections were additionally analyzed using the Brinell hardness test.",
publisher = "Springer, New York",
journal = "Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science",
title = "Experimental Investigation and Thermodynamic Calculations of the Bi-Ge-Sb Phase Diagram",
number = "11",
pages = "4829-4841",
doi = "10.1007/s11661-014-2445-4"
}

Premović, M., Minić, D., Ćosović, V., Manasijević, D.,& Živković, D.. (2014). Experimental Investigation and Thermodynamic Calculations of the Bi-Ge-Sb Phase Diagram. in Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science
Springer, New York.(11), 4829-4841.
https://doi.org/10.1007/s11661-014-2445-4

Premović M, Minić D, Ćosović V, Manasijević D, Živković D. Experimental Investigation and Thermodynamic Calculations of the Bi-Ge-Sb Phase Diagram. in Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science. 2014;(11):4829-4841.
doi:10.1007/s11661-014-2445-4 .

Premović, Milena, Minić, Duško, Ćosović, Vladan, Manasijević, Dragan, Živković, Dragana, "Experimental Investigation and Thermodynamic Calculations of the Bi-Ge-Sb Phase Diagram" in Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, no. 11 (2014):4829-4841,
https://doi.org/10.1007/s11661-014-2445-4 . .

TY  - JOUR
AU  - Minić, Duško
AU  - Premović, Milena
AU  - Ćosović, Vladan
AU  - Manasijević, Dragan
AU  - Nedeljkovic, Ljilja
AU  - Živković, Dragana
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1407
AB  - Phase diagram of the Cu-In-Ni ternary system was investigated using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and X-ray powder diffraction (XRD) methods. Experimentally obtained results were compared with the results of thermodynamic calculation of phase equilibria based on calculation of phase diagram (CALPHAD) method and literature data. Phase transition temperatures of alloys with overall compositions along three selected vertical sections Cu-In0.5Ni0.5, Cu-In0.8Ni0.2 and x(In) = 0.4 were measured by DTA. Liquidus temperatures were experimentally determined and compared with the results of thermodynamic calculation. Identification of coexisting phases in samples equilibrated at 400 degrees C and 500 degrees C was carried out using SEM-EDS and XRD methods. Obtained results were compared with the calculated isothermal sections of the Cu-In-Ni ternary system at corresponding temperatures. Calculated liquidus projection and invariant equilibria of the Cu-In-Ni ternary system were presented.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - Experimental investigation and thermodynamic calculations of the Cu-In-Ni phase diagram
VL  - 617
SP  - 379
EP  - 388
DO  - 10.1016/j.jallcom.2014.07.140
ER  - 

@article{
author = "Minić, Duško and Premović, Milena and Ćosović, Vladan and Manasijević, Dragan and Nedeljkovic, Ljilja and Živković, Dragana",
year = "2014",
abstract = "Phase diagram of the Cu-In-Ni ternary system was investigated using differential thermal analysis (DTA), scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS), and X-ray powder diffraction (XRD) methods. Experimentally obtained results were compared with the results of thermodynamic calculation of phase equilibria based on calculation of phase diagram (CALPHAD) method and literature data. Phase transition temperatures of alloys with overall compositions along three selected vertical sections Cu-In0.5Ni0.5, Cu-In0.8Ni0.2 and x(In) = 0.4 were measured by DTA. Liquidus temperatures were experimentally determined and compared with the results of thermodynamic calculation. Identification of coexisting phases in samples equilibrated at 400 degrees C and 500 degrees C was carried out using SEM-EDS and XRD methods. Obtained results were compared with the calculated isothermal sections of the Cu-In-Ni ternary system at corresponding temperatures. Calculated liquidus projection and invariant equilibria of the Cu-In-Ni ternary system were presented.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "Experimental investigation and thermodynamic calculations of the Cu-In-Ni phase diagram",
volume = "617",
pages = "379-388",
doi = "10.1016/j.jallcom.2014.07.140"
}

Minić, D., Premović, M., Ćosović, V., Manasijević, D., Nedeljkovic, L.,& Živković, D.. (2014). Experimental investigation and thermodynamic calculations of the Cu-In-Ni phase diagram. in Journal of Alloys and Compounds
Elsevier., 617, 379-388.
https://doi.org/10.1016/j.jallcom.2014.07.140

Minić D, Premović M, Ćosović V, Manasijević D, Nedeljkovic L, Živković D. Experimental investigation and thermodynamic calculations of the Cu-In-Ni phase diagram. in Journal of Alloys and Compounds. 2014;617:379-388.
doi:10.1016/j.jallcom.2014.07.140 .

Minić, Duško, Premović, Milena, Ćosović, Vladan, Manasijević, Dragan, Nedeljkovic, Ljilja, Živković, Dragana, "Experimental investigation and thermodynamic calculations of the Cu-In-Ni phase diagram" in Journal of Alloys and Compounds, 617 (2014):379-388,
https://doi.org/10.1016/j.jallcom.2014.07.140 . .

TY  - JOUR
AU  - Balanović, Ljubiša
AU  - Živković, Dragana
AU  - Manasijević, Dragan
AU  - Minić, Duško
AU  - Ćosović, Vladan
AU  - Talijan, Nadežda M.
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1406
AB  - The results of calorimetric study of binary Al-Zn system done according to the Oelsen thermodynamic method are presented in this paper. Main thermodynamic properties, including activities, activity coefficients, partial/integral molar Gibbs excess, and mixing energies were determined at 1,000 K. Positive deviation from Raoult law was noticed, with minimal values of Delta G (M) about -3 kJ mol(-1) and maximal values of Delta G (E) about +2 kJ mol(-1). The energetics of mixing in liquid Al-Zn alloys has been analyzed through the study of concentration fluctuation in the long-wavelength limit, and weak affinity between Al and Zn atoms in the system was observed. Differential thermal analysis and light optic microscopy were applied in the frame of characterization of investigated binary alloys and phase diagram examination, and the results obtained were in accordance with available literature data.
PB  - Springer, Dordrecht
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Calorimetric investigation of Al-Zn alloys using Oelsen method
VL  - 118
IS  - 2
SP  - 1287
EP  - 1292
DO  - 10.1007/s10973-014-3990-1
ER  - 

@article{
author = "Balanović, Ljubiša and Živković, Dragana and Manasijević, Dragan and Minić, Duško and Ćosović, Vladan and Talijan, Nadežda M.",
year = "2014",
abstract = "The results of calorimetric study of binary Al-Zn system done according to the Oelsen thermodynamic method are presented in this paper. Main thermodynamic properties, including activities, activity coefficients, partial/integral molar Gibbs excess, and mixing energies were determined at 1,000 K. Positive deviation from Raoult law was noticed, with minimal values of Delta G (M) about -3 kJ mol(-1) and maximal values of Delta G (E) about +2 kJ mol(-1). The energetics of mixing in liquid Al-Zn alloys has been analyzed through the study of concentration fluctuation in the long-wavelength limit, and weak affinity between Al and Zn atoms in the system was observed. Differential thermal analysis and light optic microscopy were applied in the frame of characterization of investigated binary alloys and phase diagram examination, and the results obtained were in accordance with available literature data.",
publisher = "Springer, Dordrecht",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Calorimetric investigation of Al-Zn alloys using Oelsen method",
volume = "118",
number = "2",
pages = "1287-1292",
doi = "10.1007/s10973-014-3990-1"
}

Balanović, L., Živković, D., Manasijević, D., Minić, D., Ćosović, V.,& Talijan, N. M.. (2014). Calorimetric investigation of Al-Zn alloys using Oelsen method. in Journal of Thermal Analysis and Calorimetry
Springer, Dordrecht., 118(2), 1287-1292.
https://doi.org/10.1007/s10973-014-3990-1

Balanović L, Živković D, Manasijević D, Minić D, Ćosović V, Talijan NM. Calorimetric investigation of Al-Zn alloys using Oelsen method. in Journal of Thermal Analysis and Calorimetry. 2014;118(2):1287-1292.
doi:10.1007/s10973-014-3990-1 .

Balanović, Ljubiša, Živković, Dragana, Manasijević, Dragan, Minić, Duško, Ćosović, Vladan, Talijan, Nadežda M., "Calorimetric investigation of Al-Zn alloys using Oelsen method" in Journal of Thermal Analysis and Calorimetry, 118, no. 2 (2014):1287-1292,
https://doi.org/10.1007/s10973-014-3990-1 . .

TY  - CONF
AU  - Žak, Tomas
AU  - David, B.
AU  - Ćosović, A.
AU  - Ćosović, Vladan
AU  - Živković, Dragana
AU  - Talijan, Nadežda M.
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1602
AB  - Nanocrystalline Ni-ferrite was synthesized by modified precipitation method in which soluble starch is used as dispersing agent and Na2CO 3 as a precipitating agent. NiSO4-6H2O and Fe(NO3)3-9H2O were used as precursors for nickel and ferric oxide, respectively. The obtained nanocrystalline Ni-ferrite was analysed and discussed through structural, compositional and magnetic characterization. Formation of pure NiFe2O4 phase with average crystallite size of 21 nm has been con rmed by X-ray di raction analysis (XRD). The determined phase composition was additionally supported by results of 57Fe Mössbauer phase (MS) analysis and material's nanocrystalline structure by field emission scanning electron microscopy (FE-SEM). Thermomagnetic behaviour was studied up to 800 C. The obtained room temperature magnetic hysteresis loop, recorded by means of a vibrating sample magnetometer (VSM), exhibits characteristic "S" shape of the soft magnetic material with the measured coercivity of about 10 kA/m and the specific moment up to 40 Am2/kg.
PB  - Polish Academy of Sciences
C3  - Acta Physica Polonica A
T1  - Structure and magnetic properties of nanocrystalline NiFe2O 4 prepared via precipitation route
VL  - 126
IS  - 1
SP  - 142
EP  - 143
DO  - 10.12693/APhysPolA.126.142
ER  - 

@conference{
author = "Žak, Tomas and David, B. and Ćosović, A. and Ćosović, Vladan and Živković, Dragana and Talijan, Nadežda M.",
year = "2014",
abstract = "Nanocrystalline Ni-ferrite was synthesized by modified precipitation method in which soluble starch is used as dispersing agent and Na2CO 3 as a precipitating agent. NiSO4-6H2O and Fe(NO3)3-9H2O were used as precursors for nickel and ferric oxide, respectively. The obtained nanocrystalline Ni-ferrite was analysed and discussed through structural, compositional and magnetic characterization. Formation of pure NiFe2O4 phase with average crystallite size of 21 nm has been con rmed by X-ray di raction analysis (XRD). The determined phase composition was additionally supported by results of 57Fe Mössbauer phase (MS) analysis and material's nanocrystalline structure by field emission scanning electron microscopy (FE-SEM). Thermomagnetic behaviour was studied up to 800 C. The obtained room temperature magnetic hysteresis loop, recorded by means of a vibrating sample magnetometer (VSM), exhibits characteristic "S" shape of the soft magnetic material with the measured coercivity of about 10 kA/m and the specific moment up to 40 Am2/kg.",
publisher = "Polish Academy of Sciences",
journal = "Acta Physica Polonica A",
title = "Structure and magnetic properties of nanocrystalline NiFe2O 4 prepared via precipitation route",
volume = "126",
number = "1",
pages = "142-143",
doi = "10.12693/APhysPolA.126.142"
}

Žak, T., David, B., Ćosović, A., Ćosović, V., Živković, D.,& Talijan, N. M.. (2014). Structure and magnetic properties of nanocrystalline NiFe2O 4 prepared via precipitation route. in Acta Physica Polonica A
Polish Academy of Sciences., 126(1), 142-143.
https://doi.org/10.12693/APhysPolA.126.142

Žak T, David B, Ćosović A, Ćosović V, Živković D, Talijan NM. Structure and magnetic properties of nanocrystalline NiFe2O 4 prepared via precipitation route. in Acta Physica Polonica A. 2014;126(1):142-143.
doi:10.12693/APhysPolA.126.142 .

Žak, Tomas, David, B., Ćosović, A., Ćosović, Vladan, Živković, Dragana, Talijan, Nadežda M., "Structure and magnetic properties of nanocrystalline NiFe2O 4 prepared via precipitation route" in Acta Physica Polonica A, 126, no. 1 (2014):142-143,
https://doi.org/10.12693/APhysPolA.126.142 . .

TY  - JOUR
AU  - Premović, Milena
AU  - Minic, D.
AU  - Manasijević, Dragan
AU  - Ćosović, Vladan
AU  - Živković, Dragana
AU  - Dervisevic, I.
AU  - Talijan, Nadežda M.
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1510
AB  - This paper presents comparative review of experimental and thermodynamic assessment of ternary Ag-Sb-Zn system. Isothermal section of the Ag-Sb-Zn system at 300 degrees C has been calculated by CALPHAD method using thermodynamic parameters from literature. Microstructural analysis of a number of alloys was carried out by scanning electron microscopy and optical microscopy, whereas chemical composition of observed phases was analyzed using energy dispersive X-ray spectroscopy. Hardness of selected alloys from four vertical sections was determined using Brinell hardness test and additionally by micro Vickers hardness test. Electrical conductivity of a number of alloys in the ternary Ag-Sb-Zn system was experimentally determined. Good overall agreement between experimental and calculated values was obtained.
PB  - Chinese Acad Sciences, Inst Metal Research, Shenyang
T2  - Acta Metallurgica Sinica-English Letters
T1  - Mechanical and Electrical Properties of the Ternary Ag-Sb-Zn System
VL  - 27
IS  - 1
SP  - 47
EP  - 54
DO  - 10.1007/s40195-013-0016-0
ER  - 

@article{
author = "Premović, Milena and Minic, D. and Manasijević, Dragan and Ćosović, Vladan and Živković, Dragana and Dervisevic, I. and Talijan, Nadežda M.",
year = "2014",
abstract = "This paper presents comparative review of experimental and thermodynamic assessment of ternary Ag-Sb-Zn system. Isothermal section of the Ag-Sb-Zn system at 300 degrees C has been calculated by CALPHAD method using thermodynamic parameters from literature. Microstructural analysis of a number of alloys was carried out by scanning electron microscopy and optical microscopy, whereas chemical composition of observed phases was analyzed using energy dispersive X-ray spectroscopy. Hardness of selected alloys from four vertical sections was determined using Brinell hardness test and additionally by micro Vickers hardness test. Electrical conductivity of a number of alloys in the ternary Ag-Sb-Zn system was experimentally determined. Good overall agreement between experimental and calculated values was obtained.",
publisher = "Chinese Acad Sciences, Inst Metal Research, Shenyang",
journal = "Acta Metallurgica Sinica-English Letters",
title = "Mechanical and Electrical Properties of the Ternary Ag-Sb-Zn System",
volume = "27",
number = "1",
pages = "47-54",
doi = "10.1007/s40195-013-0016-0"
}

Premović, M., Minic, D., Manasijević, D., Ćosović, V., Živković, D., Dervisevic, I.,& Talijan, N. M.. (2014). Mechanical and Electrical Properties of the Ternary Ag-Sb-Zn System. in Acta Metallurgica Sinica-English Letters
Chinese Acad Sciences, Inst Metal Research, Shenyang., 27(1), 47-54.
https://doi.org/10.1007/s40195-013-0016-0

Premović M, Minic D, Manasijević D, Ćosović V, Živković D, Dervisevic I, Talijan NM. Mechanical and Electrical Properties of the Ternary Ag-Sb-Zn System. in Acta Metallurgica Sinica-English Letters. 2014;27(1):47-54.
doi:10.1007/s40195-013-0016-0 .

Premović, Milena, Minic, D., Manasijević, Dragan, Ćosović, Vladan, Živković, Dragana, Dervisevic, I., Talijan, Nadežda M., "Mechanical and Electrical Properties of the Ternary Ag-Sb-Zn System" in Acta Metallurgica Sinica-English Letters, 27, no. 1 (2014):47-54,
https://doi.org/10.1007/s40195-013-0016-0 . .

TY  - JOUR
AU  - Ćosović, Vladan
AU  - Pavlović, Miroslav M.
AU  - Cosovic, A.
AU  - Vulić, Predrag
AU  - Premović, Milena
AU  - Živković, Dragana
AU  - Talijan, Nadežda M.
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1186
AB  - High energy ball milling was used in order to improve dispersion of metal oxide in Ag-SnO2 electrical contact materials. The processed Ag-SnO2 (92:8) and Ag-SnO2In2O3 (87.8:9.30:2.9) powder mixtures were subsequently consolidated to bulk solid pieces by conventional powder metallurgy method. The characterization of the prepared samples included microstructural analysis by XRD and SEM, as well as measurements of physical properties such as density, hardness and electrical conductivity. The results of X-Ray analysis point to reduction of crystallite size after milling of about ten times. Microstructures of sintered Ag-SnO2 and Ag-SnO2 In2O3 materials display very fine dispersion of the oxide components in silver matrix. Somewhat higher uniformity was obtained for Ag-SnO2 In2O3 material which was illustrated by results of SEM analysis and more consistent microhardness values. The obtained values of studied physical properties were found to be in accordance with observed higher dispersion of metal oxide particles and comparable to properties of commercial electrical contact materials of this type.
AB  - Metoda visokoenergetskog mehaničkog mlevenja je primenjena za pripremu elektrokontaktnih materijala na bazi Ag-SnO2 sa ciljem postizanja visokog stepena disperzije čestica metalnih oksida u srebrnoj matrici. Smeše prahova sastava Ag- SnO2 (92:8) i Ag-SnO2In2O3 (87.8:9.30:2.9) su posle mlevenja procesuirane konvencionalnim tehnikama metalurgije praha. Karakterizacija sinterovanih uzoraka obuhvatila je mikrostrukturnu analizu (XRD, SEM) kao i merenje važnijih fizičkih svojstava: gustina, tvrdoća i električna provodljivost. Rezultati XRD analize su pokazali značajno smanjenje veličine kristalita od oko deset puta. Mikrostrukturna analiza sinterovanih materijala ukazala je na veoma finu i uniformnu disperziju oksidnih komponenti u srebrnoj matrici. SEM mikrofotografije takođe pokazuju veću uniformnost mikrostrukture uzorka Ag-SnO2In2O3 što potvrđuju i ujednačenije vrednosti mikrotvrdoće dobijene za ovaj materijal. Izmerene vrednosti analiziranih fizičkih svojstava su u saglasnosti sa postignutim većim stepenom disperzije čestica metalnih oksida u srebrnoj matrici i uporedive su sa svojstvima komercijalnih elektrokontaktnih materijala ovog tipa.
PB  - International Institute for the Science of Sintering, Beograd
T2  - Science of Sintering
T1  - Microstructure refinement and physical properties of Ag-SnO2 based contact materials prepared by high-energy ball milling
VL  - 45
IS  - 2
SP  - 173
EP  - 180
DO  - 10.2298/SOS1302173C
ER  - 

@article{
author = "Ćosović, Vladan and Pavlović, Miroslav M. and Cosovic, A. and Vulić, Predrag and Premović, Milena and Živković, Dragana and Talijan, Nadežda M.",
year = "2013",
abstract = "High energy ball milling was used in order to improve dispersion of metal oxide in Ag-SnO2 electrical contact materials. The processed Ag-SnO2 (92:8) and Ag-SnO2In2O3 (87.8:9.30:2.9) powder mixtures were subsequently consolidated to bulk solid pieces by conventional powder metallurgy method. The characterization of the prepared samples included microstructural analysis by XRD and SEM, as well as measurements of physical properties such as density, hardness and electrical conductivity. The results of X-Ray analysis point to reduction of crystallite size after milling of about ten times. Microstructures of sintered Ag-SnO2 and Ag-SnO2 In2O3 materials display very fine dispersion of the oxide components in silver matrix. Somewhat higher uniformity was obtained for Ag-SnO2 In2O3 material which was illustrated by results of SEM analysis and more consistent microhardness values. The obtained values of studied physical properties were found to be in accordance with observed higher dispersion of metal oxide particles and comparable to properties of commercial electrical contact materials of this type., Metoda visokoenergetskog mehaničkog mlevenja je primenjena za pripremu elektrokontaktnih materijala na bazi Ag-SnO2 sa ciljem postizanja visokog stepena disperzije čestica metalnih oksida u srebrnoj matrici. Smeše prahova sastava Ag- SnO2 (92:8) i Ag-SnO2In2O3 (87.8:9.30:2.9) su posle mlevenja procesuirane konvencionalnim tehnikama metalurgije praha. Karakterizacija sinterovanih uzoraka obuhvatila je mikrostrukturnu analizu (XRD, SEM) kao i merenje važnijih fizičkih svojstava: gustina, tvrdoća i električna provodljivost. Rezultati XRD analize su pokazali značajno smanjenje veličine kristalita od oko deset puta. Mikrostrukturna analiza sinterovanih materijala ukazala je na veoma finu i uniformnu disperziju oksidnih komponenti u srebrnoj matrici. SEM mikrofotografije takođe pokazuju veću uniformnost mikrostrukture uzorka Ag-SnO2In2O3 što potvrđuju i ujednačenije vrednosti mikrotvrdoće dobijene za ovaj materijal. Izmerene vrednosti analiziranih fizičkih svojstava su u saglasnosti sa postignutim većim stepenom disperzije čestica metalnih oksida u srebrnoj matrici i uporedive su sa svojstvima komercijalnih elektrokontaktnih materijala ovog tipa.",
publisher = "International Institute for the Science of Sintering, Beograd",
journal = "Science of Sintering",
title = "Microstructure refinement and physical properties of Ag-SnO2 based contact materials prepared by high-energy ball milling",
volume = "45",
number = "2",
pages = "173-180",
doi = "10.2298/SOS1302173C"
}

Ćosović, V., Pavlović, M. M., Cosovic, A., Vulić, P., Premović, M., Živković, D.,& Talijan, N. M.. (2013). Microstructure refinement and physical properties of Ag-SnO2 based contact materials prepared by high-energy ball milling. in Science of Sintering
International Institute for the Science of Sintering, Beograd., 45(2), 173-180.
https://doi.org/10.2298/SOS1302173C

Ćosović V, Pavlović MM, Cosovic A, Vulić P, Premović M, Živković D, Talijan NM. Microstructure refinement and physical properties of Ag-SnO2 based contact materials prepared by high-energy ball milling. in Science of Sintering. 2013;45(2):173-180.
doi:10.2298/SOS1302173C .

Ćosović, Vladan, Pavlović, Miroslav M., Cosovic, A., Vulić, Predrag, Premović, Milena, Živković, Dragana, Talijan, Nadežda M., "Microstructure refinement and physical properties of Ag-SnO2 based contact materials prepared by high-energy ball milling" in Science of Sintering, 45, no. 2 (2013):173-180,
https://doi.org/10.2298/SOS1302173C . .

TY  - JOUR
AU  - Ćosović, Vladan
AU  - Ćosović, Aleksandar
AU  - Talijan, Nadežda M.
AU  - Živković, Dragana
AU  - Manasijević, Dragan
AU  - Minić, Duško
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1327
AB  - Considering that improvement in the performance of Ag-SnO2 electrical contact materials can be realized by an increase in metal oxide dispersion, the influence of SnO2 nanoparticles and method of their introduction in silver matrix on microstructure and physical properties such as density, porosity, hardness and electrical conductivity were studied. The SnO2 nanoparticles were introduced by conventional powder mixing and by template method using filter paper and soluble starch as templates. All investigated samples were produced by subsequent pressing, sintering of the obtained powder mixtures and composites followed by mechanical treatment. Microstructural analysis revealed that the Ag-SnO2 samples prepared by template method exhibit finer dispersion than their conventionally prepared counterpart. After sintering and forging those samples were found to have higher hardness, density and lower porosity. As a result of greater dispersion hardening, the highest value of hardness was measured for the sample prepared using soluble starch as a template. The measured values of electrical conductivity of all investigated samples are comp arable with conductivities of Ag-SnO2 electrical contact materials of this type.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - Improving dispersion of SnO2 nanoparticles in Ag-SnO2 electrical contact materials using template method
VL  - 567
SP  - 33
EP  - 39
DO  - 10.1016/j.jallcom.2013.03.094
ER  - 

@article{
author = "Ćosović, Vladan and Ćosović, Aleksandar and Talijan, Nadežda M. and Živković, Dragana and Manasijević, Dragan and Minić, Duško",
year = "2013",
abstract = "Considering that improvement in the performance of Ag-SnO2 electrical contact materials can be realized by an increase in metal oxide dispersion, the influence of SnO2 nanoparticles and method of their introduction in silver matrix on microstructure and physical properties such as density, porosity, hardness and electrical conductivity were studied. The SnO2 nanoparticles were introduced by conventional powder mixing and by template method using filter paper and soluble starch as templates. All investigated samples were produced by subsequent pressing, sintering of the obtained powder mixtures and composites followed by mechanical treatment. Microstructural analysis revealed that the Ag-SnO2 samples prepared by template method exhibit finer dispersion than their conventionally prepared counterpart. After sintering and forging those samples were found to have higher hardness, density and lower porosity. As a result of greater dispersion hardening, the highest value of hardness was measured for the sample prepared using soluble starch as a template. The measured values of electrical conductivity of all investigated samples are comp arable with conductivities of Ag-SnO2 electrical contact materials of this type.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "Improving dispersion of SnO2 nanoparticles in Ag-SnO2 electrical contact materials using template method",
volume = "567",
pages = "33-39",
doi = "10.1016/j.jallcom.2013.03.094"
}

Ćosović, V., Ćosović, A., Talijan, N. M., Živković, D., Manasijević, D.,& Minić, D.. (2013). Improving dispersion of SnO2 nanoparticles in Ag-SnO2 electrical contact materials using template method. in Journal of Alloys and Compounds
Elsevier., 567, 33-39.
https://doi.org/10.1016/j.jallcom.2013.03.094

Ćosović V, Ćosović A, Talijan NM, Živković D, Manasijević D, Minić D. Improving dispersion of SnO2 nanoparticles in Ag-SnO2 electrical contact materials using template method. in Journal of Alloys and Compounds. 2013;567:33-39.
doi:10.1016/j.jallcom.2013.03.094 .

Ćosović, Vladan, Ćosović, Aleksandar, Talijan, Nadežda M., Živković, Dragana, Manasijević, Dragan, Minić, Duško, "Improving dispersion of SnO2 nanoparticles in Ag-SnO2 electrical contact materials using template method" in Journal of Alloys and Compounds, 567 (2013):33-39,
https://doi.org/10.1016/j.jallcom.2013.03.094 . .

TY  - JOUR
AU  - Manasijević, Dragan
AU  - Živković, Dragana
AU  - Talijan, Nadežda M.
AU  - Ćosović, Vladan
AU  - Gomidzelovic, Lidija
AU  - Todorovic, Radisa
AU  - Minić, Duško
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1309
AB  - Phase transition temperatures of the selected samples with compositions along isopleths: GaSb-AuGa2, GaSb-AuGa, Au-GaSb, Sb-AuGa, GaSb-Au0.3333Sb0.6667 and Ga-Au0.5Sb0.5 were measured using differential scanning calorimetry (DSC). Experimentally determined phase transition temperatures were compared with the results of thermodynamic calculation. Also, predicted phase equilibria at room temperature were compared with the literature experimental data.
PB  - Oxford : Pergamon-Elsevier Science Ltd
T2  - Journal of Physics and Chemistry of Solids
T1  - Thermal analysis and thermodynamic prediction of phase equilibria in the ternary Au-Ga-Sb system
VL  - 74
IS  - 2
SP  - 280
EP  - 285
DO  - 10.1016/j.jpcs.2012.09.019
ER  - 

@article{
author = "Manasijević, Dragan and Živković, Dragana and Talijan, Nadežda M. and Ćosović, Vladan and Gomidzelovic, Lidija and Todorovic, Radisa and Minić, Duško",
year = "2013",
abstract = "Phase transition temperatures of the selected samples with compositions along isopleths: GaSb-AuGa2, GaSb-AuGa, Au-GaSb, Sb-AuGa, GaSb-Au0.3333Sb0.6667 and Ga-Au0.5Sb0.5 were measured using differential scanning calorimetry (DSC). Experimentally determined phase transition temperatures were compared with the results of thermodynamic calculation. Also, predicted phase equilibria at room temperature were compared with the literature experimental data.",
publisher = "Oxford : Pergamon-Elsevier Science Ltd",
journal = "Journal of Physics and Chemistry of Solids",
title = "Thermal analysis and thermodynamic prediction of phase equilibria in the ternary Au-Ga-Sb system",
volume = "74",
number = "2",
pages = "280-285",
doi = "10.1016/j.jpcs.2012.09.019"
}

Manasijević, D., Živković, D., Talijan, N. M., Ćosović, V., Gomidzelovic, L., Todorovic, R.,& Minić, D.. (2013). Thermal analysis and thermodynamic prediction of phase equilibria in the ternary Au-Ga-Sb system. in Journal of Physics and Chemistry of Solids
Oxford : Pergamon-Elsevier Science Ltd., 74(2), 280-285.
https://doi.org/10.1016/j.jpcs.2012.09.019

Manasijević D, Živković D, Talijan NM, Ćosović V, Gomidzelovic L, Todorovic R, Minić D. Thermal analysis and thermodynamic prediction of phase equilibria in the ternary Au-Ga-Sb system. in Journal of Physics and Chemistry of Solids. 2013;74(2):280-285.
doi:10.1016/j.jpcs.2012.09.019 .

Manasijević, Dragan, Živković, Dragana, Talijan, Nadežda M., Ćosović, Vladan, Gomidzelovic, Lidija, Todorovic, Radisa, Minić, Duško, "Thermal analysis and thermodynamic prediction of phase equilibria in the ternary Au-Ga-Sb system" in Journal of Physics and Chemistry of Solids, 74, no. 2 (2013):280-285,
https://doi.org/10.1016/j.jpcs.2012.09.019 . .

TY  - JOUR
AU  - Minić, Duško
AU  - Premović, Milena
AU  - Ćosović, Vladan
AU  - Manasijević, Dragan
AU  - Živković, Dragana
AU  - Kostov, Ana
AU  - Talijan, Nadežda M.
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1275
AB  - Phase diagram of the Al-Cu-Sb ternary system was investigated experimentally by DTA and SEM-EDS methods and theoretically by CALPHAD method. The liquidus projection, invariant equilibria, three vertical sections: Sb-Al0.5Cu0.5, Al-Cu0.5Sb0.5 and Cu-Al0.5Sb0.5 as well as isothermal sections at 400 degrees C and 200 degrees C were predicted using COST MP0602 thermodynamic database. In addition, phase transition temperatures of the selected samples with compositions along calculated isopleths were experimentally determined using DTA. Experimentally obtained phase transition temperatures were compared with the results of thermodynamic calculation. Predicted isothermal sections at 400 degrees C and 200 degrees C were compared with the results of the SEM-EDS analysis from this work. In both cases, a good agreement between theoretical calculations and experimental results was obtained.
PB  - Elsevier
T2  - Journal of Alloys and Compounds
T1  - Experimental investigation and thermodynamic calculations of the Al-Cu-Sb phase diagram
VL  - 555
SP  - 347
EP  - 356
DO  - 10.1016/j.jallcom.2012.12.059
ER  - 

@article{
author = "Minić, Duško and Premović, Milena and Ćosović, Vladan and Manasijević, Dragan and Živković, Dragana and Kostov, Ana and Talijan, Nadežda M.",
year = "2013",
abstract = "Phase diagram of the Al-Cu-Sb ternary system was investigated experimentally by DTA and SEM-EDS methods and theoretically by CALPHAD method. The liquidus projection, invariant equilibria, three vertical sections: Sb-Al0.5Cu0.5, Al-Cu0.5Sb0.5 and Cu-Al0.5Sb0.5 as well as isothermal sections at 400 degrees C and 200 degrees C were predicted using COST MP0602 thermodynamic database. In addition, phase transition temperatures of the selected samples with compositions along calculated isopleths were experimentally determined using DTA. Experimentally obtained phase transition temperatures were compared with the results of thermodynamic calculation. Predicted isothermal sections at 400 degrees C and 200 degrees C were compared with the results of the SEM-EDS analysis from this work. In both cases, a good agreement between theoretical calculations and experimental results was obtained.",
publisher = "Elsevier",
journal = "Journal of Alloys and Compounds",
title = "Experimental investigation and thermodynamic calculations of the Al-Cu-Sb phase diagram",
volume = "555",
pages = "347-356",
doi = "10.1016/j.jallcom.2012.12.059"
}

Minić, D., Premović, M., Ćosović, V., Manasijević, D., Živković, D., Kostov, A.,& Talijan, N. M.. (2013). Experimental investigation and thermodynamic calculations of the Al-Cu-Sb phase diagram. in Journal of Alloys and Compounds
Elsevier., 555, 347-356.
https://doi.org/10.1016/j.jallcom.2012.12.059

Minić D, Premović M, Ćosović V, Manasijević D, Živković D, Kostov A, Talijan NM. Experimental investigation and thermodynamic calculations of the Al-Cu-Sb phase diagram. in Journal of Alloys and Compounds. 2013;555:347-356.
doi:10.1016/j.jallcom.2012.12.059 .

Minić, Duško, Premović, Milena, Ćosović, Vladan, Manasijević, Dragan, Živković, Dragana, Kostov, Ana, Talijan, Nadežda M., "Experimental investigation and thermodynamic calculations of the Al-Cu-Sb phase diagram" in Journal of Alloys and Compounds, 555 (2013):347-356,
https://doi.org/10.1016/j.jallcom.2012.12.059 . .

TY  - JOUR
AU  - Minić, Duško
AU  - Premović, Milena
AU  - Kolarevic, Milan
AU  - Ćosović, Vladan
AU  - Manasijević, Dragan
AU  - Živković, Dragana
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1202
AB  - Lead-free solders with copper are considered as a possible substitution for standard lead-tin solders. Ternary Bi-Cu-In system is a potential soldering material based on copper. For a more complete characterization of the ternary Bi-Cu-In system, alloys from the three vertical sections were investigated using microstructural analysis as well as by electrical conductivity and Brinell hardness measurements. The microstructures of the alloys were investigated at room temperature by application of scanning electron microscopy combined with energy dispersive spectrometry and optical microscopy. Isolines of electrical conductivity and hardness for the entire Bi-Cu-In system were calculated using regression models. In addition, a thermodynamic assessment of the system has been carried out by calculation of the isothermal section at 25 A degrees C and description of the liquidus surface using the CALPHAD method. Experimental and analytical results were found to be in a good agreement.
PB  - Springer, New York
T2  - Journal of Materials Engineering and Performance
T1  - Description of the Liquidus Surface and Characterization of Alloys of the Ternary Bi-Cu-In System
VL  - 22
IS  - 8
SP  - 2343
EP  - 2350
DO  - 10.1007/s11665-013-0493-3
ER  - 

@article{
author = "Minić, Duško and Premović, Milena and Kolarevic, Milan and Ćosović, Vladan and Manasijević, Dragan and Živković, Dragana",
year = "2013",
abstract = "Lead-free solders with copper are considered as a possible substitution for standard lead-tin solders. Ternary Bi-Cu-In system is a potential soldering material based on copper. For a more complete characterization of the ternary Bi-Cu-In system, alloys from the three vertical sections were investigated using microstructural analysis as well as by electrical conductivity and Brinell hardness measurements. The microstructures of the alloys were investigated at room temperature by application of scanning electron microscopy combined with energy dispersive spectrometry and optical microscopy. Isolines of electrical conductivity and hardness for the entire Bi-Cu-In system were calculated using regression models. In addition, a thermodynamic assessment of the system has been carried out by calculation of the isothermal section at 25 A degrees C and description of the liquidus surface using the CALPHAD method. Experimental and analytical results were found to be in a good agreement.",
publisher = "Springer, New York",
journal = "Journal of Materials Engineering and Performance",
title = "Description of the Liquidus Surface and Characterization of Alloys of the Ternary Bi-Cu-In System",
volume = "22",
number = "8",
pages = "2343-2350",
doi = "10.1007/s11665-013-0493-3"
}

Minić, D., Premović, M., Kolarevic, M., Ćosović, V., Manasijević, D.,& Živković, D.. (2013). Description of the Liquidus Surface and Characterization of Alloys of the Ternary Bi-Cu-In System. in Journal of Materials Engineering and Performance
Springer, New York., 22(8), 2343-2350.
https://doi.org/10.1007/s11665-013-0493-3

Minić D, Premović M, Kolarevic M, Ćosović V, Manasijević D, Živković D. Description of the Liquidus Surface and Characterization of Alloys of the Ternary Bi-Cu-In System. in Journal of Materials Engineering and Performance. 2013;22(8):2343-2350.
doi:10.1007/s11665-013-0493-3 .

Minić, Duško, Premović, Milena, Kolarevic, Milan, Ćosović, Vladan, Manasijević, Dragan, Živković, Dragana, "Description of the Liquidus Surface and Characterization of Alloys of the Ternary Bi-Cu-In System" in Journal of Materials Engineering and Performance, 22, no. 8 (2013):2343-2350,
https://doi.org/10.1007/s11665-013-0493-3 . .

TY  - JOUR
AU  - Živković, Dragana
AU  - Ćosović, Vladan
AU  - Zivkovic, Z.
AU  - Strbac, N.
AU  - Sokic, M.
AU  - Talijan, Nadežda M.
AU  - Boyanov, B.
AU  - Mitovski, A.
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1321
AB  - The results of kinetic investigation of silver sulfide (Ag2S) phase transformations-monoclinic (alpha) to body-centered-cubic (beta) and body-centered-cubic to face-centered-cubic (gamma) crystal form - are presented in this paper. Measured data obtained by thermal analysis under non-isothermal conditions were used for kinetic analysis. The activation energy for investigated phase transformation process was determined according to the methods by Kissinger and Ozawa.
PB  - Elsevier Sci Ltd, Oxford
T2  - Materials Science in Semiconductor Processing
T1  - Kinetic investigation of silver sulfide phase transformations
VL  - 16
IS  - 1
SP  - 217
EP  - 220
DO  - 10.1016/j.mssp.2012.06.023
ER  - 

@article{
author = "Živković, Dragana and Ćosović, Vladan and Zivkovic, Z. and Strbac, N. and Sokic, M. and Talijan, Nadežda M. and Boyanov, B. and Mitovski, A.",
year = "2013",
abstract = "The results of kinetic investigation of silver sulfide (Ag2S) phase transformations-monoclinic (alpha) to body-centered-cubic (beta) and body-centered-cubic to face-centered-cubic (gamma) crystal form - are presented in this paper. Measured data obtained by thermal analysis under non-isothermal conditions were used for kinetic analysis. The activation energy for investigated phase transformation process was determined according to the methods by Kissinger and Ozawa.",
publisher = "Elsevier Sci Ltd, Oxford",
journal = "Materials Science in Semiconductor Processing",
title = "Kinetic investigation of silver sulfide phase transformations",
volume = "16",
number = "1",
pages = "217-220",
doi = "10.1016/j.mssp.2012.06.023"
}

Živković, D., Ćosović, V., Zivkovic, Z., Strbac, N., Sokic, M., Talijan, N. M., Boyanov, B.,& Mitovski, A.. (2013). Kinetic investigation of silver sulfide phase transformations. in Materials Science in Semiconductor Processing
Elsevier Sci Ltd, Oxford., 16(1), 217-220.
https://doi.org/10.1016/j.mssp.2012.06.023

Živković D, Ćosović V, Zivkovic Z, Strbac N, Sokic M, Talijan NM, Boyanov B, Mitovski A. Kinetic investigation of silver sulfide phase transformations. in Materials Science in Semiconductor Processing. 2013;16(1):217-220.
doi:10.1016/j.mssp.2012.06.023 .

Živković, Dragana, Ćosović, Vladan, Zivkovic, Z., Strbac, N., Sokic, M., Talijan, Nadežda M., Boyanov, B., Mitovski, A., "Kinetic investigation of silver sulfide phase transformations" in Materials Science in Semiconductor Processing, 16, no. 1 (2013):217-220,
https://doi.org/10.1016/j.mssp.2012.06.023 . .

TY  - JOUR
AU  - Živković, Dragana
AU  - Sokic, M.
AU  - Zivkovic, Z.
AU  - Manasijević, Dragan
AU  - Balanović, Ljubiša
AU  - Strbac, N.
AU  - Ćosović, Vladan
AU  - Boyanov, B.
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1313
AB  - The results of thermal study and mechanism of the oxidation process of synthetic Ag2S in air are presented in this article based on the comparative analysis of DTA and XRD results, as well as by constructed phase stability diagrams (PSD) for the Ag-S-O system.
PB  - Springer, Dordrecht
T2  - Journal of Thermal Analysis and Calorimetry
T1  - Thermal study and mechanism of Ag2S oxidation in air
VL  - 111
IS  - 2
SP  - 1173
EP  - 1176
DO  - 10.1007/s10973-012-2300-z
ER  - 

@article{
author = "Živković, Dragana and Sokic, M. and Zivkovic, Z. and Manasijević, Dragan and Balanović, Ljubiša and Strbac, N. and Ćosović, Vladan and Boyanov, B.",
year = "2013",
abstract = "The results of thermal study and mechanism of the oxidation process of synthetic Ag2S in air are presented in this article based on the comparative analysis of DTA and XRD results, as well as by constructed phase stability diagrams (PSD) for the Ag-S-O system.",
publisher = "Springer, Dordrecht",
journal = "Journal of Thermal Analysis and Calorimetry",
title = "Thermal study and mechanism of Ag2S oxidation in air",
volume = "111",
number = "2",
pages = "1173-1176",
doi = "10.1007/s10973-012-2300-z"
}

Živković, D., Sokic, M., Zivkovic, Z., Manasijević, D., Balanović, L., Strbac, N., Ćosović, V.,& Boyanov, B.. (2013). Thermal study and mechanism of Ag2S oxidation in air. in Journal of Thermal Analysis and Calorimetry
Springer, Dordrecht., 111(2), 1173-1176.
https://doi.org/10.1007/s10973-012-2300-z

Živković D, Sokic M, Zivkovic Z, Manasijević D, Balanović L, Strbac N, Ćosović V, Boyanov B. Thermal study and mechanism of Ag2S oxidation in air. in Journal of Thermal Analysis and Calorimetry. 2013;111(2):1173-1176.
doi:10.1007/s10973-012-2300-z .

Živković, Dragana, Sokic, M., Zivkovic, Z., Manasijević, Dragan, Balanović, Ljubiša, Strbac, N., Ćosović, Vladan, Boyanov, B., "Thermal study and mechanism of Ag2S oxidation in air" in Journal of Thermal Analysis and Calorimetry, 111, no. 2 (2013):1173-1176,
https://doi.org/10.1007/s10973-012-2300-z . .

TY  - JOUR
AU  - Živković, Dragana
AU  - Gomidzelovic, Lidija
AU  - Manasijević, Dragan
AU  - Talijan, Nadežda M.
AU  - Ćosović, Vladan
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1304
AB  - The results of calorimetric study and phase equilibria investigation of the Au-Ga system, in the Ga-rich region, are presented. Calorimetric study was done using Oelsen methodology and partial and integral molar thermodynamic quantities were determined-at a temperature of 873 K. Phase equilibria investigations were done experimentally - using differential thermal analysis, light optical microscopy and scanning electron microscopy with energy-dispersive X-ray spectroscopy, and theoretically - using the CALPHAD method. Results agree well with available literature data.
PB  - Carl Hanser Verlag
T2  - International Journal of Materials Research
T1  - Calorimetric study and phase diagram investigation of the Au-Ga system
VL  - 104
IS  - 6
SP  - 554
EP  - 560
DO  - 10.3139/146.110905
ER  - 

@article{
author = "Živković, Dragana and Gomidzelovic, Lidija and Manasijević, Dragan and Talijan, Nadežda M. and Ćosović, Vladan",
year = "2013",
abstract = "The results of calorimetric study and phase equilibria investigation of the Au-Ga system, in the Ga-rich region, are presented. Calorimetric study was done using Oelsen methodology and partial and integral molar thermodynamic quantities were determined-at a temperature of 873 K. Phase equilibria investigations were done experimentally - using differential thermal analysis, light optical microscopy and scanning electron microscopy with energy-dispersive X-ray spectroscopy, and theoretically - using the CALPHAD method. Results agree well with available literature data.",
publisher = "Carl Hanser Verlag",
journal = "International Journal of Materials Research",
title = "Calorimetric study and phase diagram investigation of the Au-Ga system",
volume = "104",
number = "6",
pages = "554-560",
doi = "10.3139/146.110905"
}

Živković, D., Gomidzelovic, L., Manasijević, D., Talijan, N. M.,& Ćosović, V.. (2013). Calorimetric study and phase diagram investigation of the Au-Ga system. in International Journal of Materials Research
Carl Hanser Verlag., 104(6), 554-560.
https://doi.org/10.3139/146.110905

Živković D, Gomidzelovic L, Manasijević D, Talijan NM, Ćosović V. Calorimetric study and phase diagram investigation of the Au-Ga system. in International Journal of Materials Research. 2013;104(6):554-560.
doi:10.3139/146.110905 .

Živković, Dragana, Gomidzelovic, Lidija, Manasijević, Dragan, Talijan, Nadežda M., Ćosović, Vladan, "Calorimetric study and phase diagram investigation of the Au-Ga system" in International Journal of Materials Research, 104, no. 6 (2013):554-560,
https://doi.org/10.3139/146.110905 . .