TY  - JOUR
AU  - Vuksanović, Marija
AU  - Mladenović, Ivana
AU  - Radovanović, Željko
AU  - Živković, Predrag
AU  - Savić, Andrija
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7519
AB  - Polimerne smole na bazi akrilata dobijene iz Bis-GMA (Bisfenol A glicidmetakrilat), koji je pogodan za
fotopolimerizaciju, koriste se u stomatologiji za različite namene zbog lakoće nanošenja i mogućnosti
da se utiče na njihova svojstva dodavanjem ojačanja različitog oblika i hemijskog sastava. Sintetisano
je ojačanje u formi čestica na bazi dvostrukih slojevitih hidroksida magnezijuma i aluminijuma (MgAlLDH- Layered Double Hidroxides) nataloženih na silicijum dioksidu dobijenom iz ljuski pirinča. Kao
podloge korišćene su metalna legura na bazi hroma i molibdena za primenu u stomatologiji i staklo u
formi podloga za mikroskopske preparate. Adhezivna svojstva kompozita su bitna sa aspekta njihove
primene. Adhezivna svojstva materijala su određena na osnovu merenja mikrotvrdoće kompozita i to
primenom različitih opterećenja kako bi se procenio parametar adhezije koji pokazuje uticaj prevlake
na podlogu. Upoređeno je kako se vezuje čista matrica od fotopolimerizujućeg akrilata sa podlogom od
stomatološke legure sa vezivanjem za staklenu podlogu. Potom je upoređeno kako se vezuju kompozitni
materijali na obe podloge. Adhezija je određena i na osnovu promene ugla kvašenja između kompozita
i rezultati su upoređeni sa rezultatima mikroindentacije. Pokazalo se da dodatak kompozitnih čestica
kao ojačanja u matricu od akrilata povećava adhezivna svojstva kompozita u odnosu na čistu matricu i
da se ost
AB  - Polymer resins based on acrylates obtained from Bis-GMA (Bisphenol A glycide methacrylate), which is suitable for photopolymerization, are used in dentistry for various purposes due to the ease of application and the possibility to influence their properties by adding reinforcements of different shapes, crystal structure and chemical compositions. Reinforcement in the form of particles based on MgAlLDH (layered double hydroxide) deposited on silica obtained from rice husks on two substrates. A metal base and glass were used. The adhesive properties are important in order to see the possibility of using these materials in applications. In order to measure the adhesive properties of the material, the composite microhardness measurement method is used by applying different loads in order to evaluate the adhesion parameter that shows the effect of the coating on the substrate. It was compared to how a pure photopolymerizing acrylate matrix bonds with a chromium-based dental alloy substrate that is used in the production of different parts of dentures by bonding to a glass substrate. Then, it was compared how composite materials are bonded to both substrates. Adhesion was monitored through the change in wetting angle between the composites, and the results were compared with the results of microindentation. It was shown that the addition of composite particles increases the adhesive properties of the composite compared to the pure matrix and that better adhesion is achieved between the composite and the metal substrate than between the composite and the glass substrate.
PB  - Beograd : Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAl- LDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu
T1  - Adhesion testing of photopolymerizing acrylates reinforced with MgAlLDH@SiO2 particles on dental chromium alloy and on glass
VL  - 79
IS  - 1
SP  - 9
EP  - 13
DO  - 10.5937/tehnika2401009V
ER  - 

@article{
author = "Vuksanović, Marija and Mladenović, Ivana and Radovanović, Željko and Živković, Predrag and Savić, Andrija and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2024",
abstract = "Polimerne smole na bazi akrilata dobijene iz Bis-GMA (Bisfenol A glicidmetakrilat), koji je pogodan za
fotopolimerizaciju, koriste se u stomatologiji za različite namene zbog lakoće nanošenja i mogućnosti
da se utiče na njihova svojstva dodavanjem ojačanja različitog oblika i hemijskog sastava. Sintetisano
je ojačanje u formi čestica na bazi dvostrukih slojevitih hidroksida magnezijuma i aluminijuma (MgAlLDH- Layered Double Hidroxides) nataloženih na silicijum dioksidu dobijenom iz ljuski pirinča. Kao
podloge korišćene su metalna legura na bazi hroma i molibdena za primenu u stomatologiji i staklo u
formi podloga za mikroskopske preparate. Adhezivna svojstva kompozita su bitna sa aspekta njihove
primene. Adhezivna svojstva materijala su određena na osnovu merenja mikrotvrdoće kompozita i to
primenom različitih opterećenja kako bi se procenio parametar adhezije koji pokazuje uticaj prevlake
na podlogu. Upoređeno je kako se vezuje čista matrica od fotopolimerizujućeg akrilata sa podlogom od
stomatološke legure sa vezivanjem za staklenu podlogu. Potom je upoređeno kako se vezuju kompozitni
materijali na obe podloge. Adhezija je određena i na osnovu promene ugla kvašenja između kompozita
i rezultati su upoređeni sa rezultatima mikroindentacije. Pokazalo se da dodatak kompozitnih čestica
kao ojačanja u matricu od akrilata povećava adhezivna svojstva kompozita u odnosu na čistu matricu i
da se ost, Polymer resins based on acrylates obtained from Bis-GMA (Bisphenol A glycide methacrylate), which is suitable for photopolymerization, are used in dentistry for various purposes due to the ease of application and the possibility to influence their properties by adding reinforcements of different shapes, crystal structure and chemical compositions. Reinforcement in the form of particles based on MgAlLDH (layered double hydroxide) deposited on silica obtained from rice husks on two substrates. A metal base and glass were used. The adhesive properties are important in order to see the possibility of using these materials in applications. In order to measure the adhesive properties of the material, the composite microhardness measurement method is used by applying different loads in order to evaluate the adhesion parameter that shows the effect of the coating on the substrate. It was compared to how a pure photopolymerizing acrylate matrix bonds with a chromium-based dental alloy substrate that is used in the production of different parts of dentures by bonding to a glass substrate. Then, it was compared how composite materials are bonded to both substrates. Adhesion was monitored through the change in wetting angle between the composites, and the results were compared with the results of microindentation. It was shown that the addition of composite particles increases the adhesive properties of the composite compared to the pure matrix and that better adhesion is achieved between the composite and the metal substrate than between the composite and the glass substrate.",
publisher = "Beograd : Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAl- LDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu, Adhesion testing of photopolymerizing acrylates reinforced with MgAlLDH@SiO2 particles on dental chromium alloy and on glass",
volume = "79",
number = "1",
pages = "9-13",
doi = "10.5937/tehnika2401009V"
}

Vuksanović, M., Mladenović, I., Radovanović, Ž., Živković, P., Savić, A., Marinković, A.,& Jančić-Heinemann, R.. (2024). Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAl- LDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu. in Tehnika
Beograd : Savez inženjera i tehničara Srbije., 79(1), 9-13.
https://doi.org/10.5937/tehnika2401009V

Vuksanović M, Mladenović I, Radovanović Ž, Živković P, Savić A, Marinković A, Jančić-Heinemann R. Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAl- LDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu. in Tehnika. 2024;79(1):9-13.
doi:10.5937/tehnika2401009V .

Vuksanović, Marija, Mladenović, Ivana, Radovanović, Željko, Živković, Predrag, Savić, Andrija, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Ispitivanje prianjanja fotopolimerizujućih akrilata ojačanih česticama MgAl- LDH@SiO2 na stomatološkoj hromiranoj leguri i na staklu" in Tehnika, 79, no. 1 (2024):9-13,
https://doi.org/10.5937/tehnika2401009V . .

TY  - JOUR
AU  - Alazreg, Asma
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana O.
AU  - Egelja, Adela
AU  - Janković-Mandić, Ljiljana
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6694
AB  - The MgAl-LDH@SiO2 particles are prepared by the coprecipitation of LDH on silica originating from plants.
Particles are of submicron size and are well dispersed in the matrix. Composites consisting of PMMA reinforced
with MgAl-LDH@SiO2 particles have improved hardness and resistance to viscoelastic deformation, as tested by
microhardness measurements.
PB  - Elsevier
T2  - Materials Letters
T1  - Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles
VL  - 354
SP  - 135354
DO  - 10.1016/j.matlet.2023.135354
ER  - 

@article{
author = "Alazreg, Asma and Vuksanović, Marija M. and Mladenović, Ivana O. and Egelja, Adela and Janković-Mandić, Ljiljana and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2024",
abstract = "The MgAl-LDH@SiO2 particles are prepared by the coprecipitation of LDH on silica originating from plants.
Particles are of submicron size and are well dispersed in the matrix. Composites consisting of PMMA reinforced
with MgAl-LDH@SiO2 particles have improved hardness and resistance to viscoelastic deformation, as tested by
microhardness measurements.",
publisher = "Elsevier",
journal = "Materials Letters",
title = "Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles",
volume = "354",
pages = "135354",
doi = "10.1016/j.matlet.2023.135354"
}

Alazreg, A., Vuksanović, M. M., Mladenović, I. O., Egelja, A., Janković-Mandić, L., Marinković, A.,& Jančić-Heinemann, R.. (2024). Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles. in Materials Letters
Elsevier., 354, 135354.
https://doi.org/10.1016/j.matlet.2023.135354

Alazreg A, Vuksanović MM, Mladenović IO, Egelja A, Janković-Mandić L, Marinković A, Jančić-Heinemann R. Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles. in Materials Letters. 2024;354:135354.
doi:10.1016/j.matlet.2023.135354 .

Alazreg, Asma, Vuksanović, Marija M., Mladenović, Ivana O., Egelja, Adela, Janković-Mandić, Ljiljana, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Dental material based on poly(methyl methacrylate) with magnesium-aluminum layered double hydroxide (MgAl-LDH) on bio-silica particles" in Materials Letters, 354 (2024):135354,
https://doi.org/10.1016/j.matlet.2023.135354 . .

TY  - JOUR
AU  - Vuksanović, Marija
AU  - Mladenović, Ivana
AU  - Stupar, Stevan
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2024
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7366
AB  - Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modified
plant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained from
waste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the produced
silica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigate
the mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization of
composite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) and
measurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM)
regression analysis. The maximal microhardness values (0.459 GPa) were obtained of type modification of silica particles with
vinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and load
for comparison of measurements between different composite materials and to enable the choice of the material in terms of
optimization of the quality of reinforcement and quality of interphase determined by surface modification.
PB  - SAGE
T2  - Polymers and Polymer Composites
T1  - Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology
VL  - 32
SP  - 1
EP  - 12
DO  - 10.1177/09673911241228
ER  - 

@article{
author = "Vuksanović, Marija and Mladenović, Ivana and Stupar, Stevan and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2024",
abstract = "Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modified
plant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained from
waste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the produced
silica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigate
the mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization of
composite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) and
measurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM)
regression analysis. The maximal microhardness values (0.459 GPa) were obtained of type modification of silica particles with
vinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and load
for comparison of measurements between different composite materials and to enable the choice of the material in terms of
optimization of the quality of reinforcement and quality of interphase determined by surface modification.",
publisher = "SAGE",
journal = "Polymers and Polymer Composites",
title = "Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology",
volume = "32",
pages = "1-12",
doi = "10.1177/09673911241228"
}

Vuksanović, M., Mladenović, I., Stupar, S., Marinković, A.,& Jančić-Heinemann, R.. (2024). Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology. in Polymers and Polymer Composites
SAGE., 32, 1-12.
https://doi.org/10.1177/09673911241228

Vuksanović M, Mladenović I, Stupar S, Marinković A, Jančić-Heinemann R. Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology. in Polymers and Polymer Composites. 2024;32:1-12.
doi:10.1177/09673911241228 .

Vuksanović, Marija, Mladenović, Ivana, Stupar, Stevan, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology" in Polymers and Polymer Composites, 32 (2024):1-12,
https://doi.org/10.1177/09673911241228 . .

TY  - JOUR
AU  - Alazreg, Asma
AU  - Vuksanović, Marija M.
AU  - Egelja, Adela
AU  - Mladenović, Ivana O.
AU  - Radovanović, Željko
AU  - Petrović, Miloš
AU  - Marinković, Aleksandar
AU  - Jančić-Heinemann, Radmila
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6582
AB  - Acrylate polymers are used in several applications such as dentistry, medicine,
and industry. The modification of their properties using the reinforcement is
of key importance for the possible applications. Layered double hydroxides are
materials that are easily synthesized by several techniques giving the possibility to modulate the chemical composition and morphology of the reinforcement and they consist of a divalent and a trivalent anion hydroxide and the
layers can be exfoliated and thus provide a material interesting for composite
reinforcement. In this paper, Mn was used as a divalent and Al as a trivalent
cation. The obtained particles were used as reinforcement for the preparation
of composites in 1, 3, and 5 wt% quantities and prepared samples were compared to the matrix consisting of PMMA. Physical mechanical properties of the
sample having the best mechanical properties (with 3 wt% of MnAl-LDH
filers) exhibited 6.38% modulus of elasticity, 27% hardness, and 10% tensile
strength improved values compared to the clear PMMA matrix. Toughness
was lowered in this sort of composite compared to the pure matrix.
PB  - Willey
T2  - Polymer Composites
T1  - Mechanical properties of acrylate matrix composite reinforced with manganese-aluminum layered double hydroxide
VL  - 44
IS  - 10
SP  - 6783
EP  - 6783
DO  - https://doi.org/10.1002/pc.27597
ER  - 

@article{
author = "Alazreg, Asma and Vuksanović, Marija M. and Egelja, Adela and Mladenović, Ivana O. and Radovanović, Željko and Petrović, Miloš and Marinković, Aleksandar and Jančić-Heinemann, Radmila",
year = "2023",
abstract = "Acrylate polymers are used in several applications such as dentistry, medicine,
and industry. The modification of their properties using the reinforcement is
of key importance for the possible applications. Layered double hydroxides are
materials that are easily synthesized by several techniques giving the possibility to modulate the chemical composition and morphology of the reinforcement and they consist of a divalent and a trivalent anion hydroxide and the
layers can be exfoliated and thus provide a material interesting for composite
reinforcement. In this paper, Mn was used as a divalent and Al as a trivalent
cation. The obtained particles were used as reinforcement for the preparation
of composites in 1, 3, and 5 wt% quantities and prepared samples were compared to the matrix consisting of PMMA. Physical mechanical properties of the
sample having the best mechanical properties (with 3 wt% of MnAl-LDH
filers) exhibited 6.38% modulus of elasticity, 27% hardness, and 10% tensile
strength improved values compared to the clear PMMA matrix. Toughness
was lowered in this sort of composite compared to the pure matrix.",
publisher = "Willey",
journal = "Polymer Composites",
title = "Mechanical properties of acrylate matrix composite reinforced with manganese-aluminum layered double hydroxide",
volume = "44",
number = "10",
pages = "6783-6783",
doi = "https://doi.org/10.1002/pc.27597"
}

Alazreg, A., Vuksanović, M. M., Egelja, A., Mladenović, I. O., Radovanović, Ž., Petrović, M., Marinković, A.,& Jančić-Heinemann, R.. (2023). Mechanical properties of acrylate matrix composite reinforced with manganese-aluminum layered double hydroxide. in Polymer Composites
Willey., 44(10), 6783-6783.
https://doi.org/https://doi.org/10.1002/pc.27597

Alazreg A, Vuksanović MM, Egelja A, Mladenović IO, Radovanović Ž, Petrović M, Marinković A, Jančić-Heinemann R. Mechanical properties of acrylate matrix composite reinforced with manganese-aluminum layered double hydroxide. in Polymer Composites. 2023;44(10):6783-6783.
doi:https://doi.org/10.1002/pc.27597 .

Alazreg, Asma, Vuksanović, Marija M., Egelja, Adela, Mladenović, Ivana O., Radovanović, Željko, Petrović, Miloš, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Mechanical properties of acrylate matrix composite reinforced with manganese-aluminum layered double hydroxide" in Polymer Composites, 44, no. 10 (2023):6783-6783,
https://doi.org/https://doi.org/10.1002/pc.27597 . .

TY  - JOUR
AU  - Vuksanović, Marija
AU  - Jovanović, Aleksandar A.
AU  - Milošević, Milena
AU  - Gržetić, Jelena
AU  - Stajčić, Ivana
AU  - Jančić-Heinemann, Radmila
AU  - Marinković, Aleksandar
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5628
AB  - Predmet ovog istraživanja je sinteza glikolizata iz recikliranog poli(etilen tereftalata) (PET) postupcima depolimerizacije pomoću dietilenglikoala (DEG) u prisustvu katalizatora FASCAT 4100. Dobijeni glikolizat je zatim tretiran anhidridom maleinske kiseline i na kraju 2-oktanolom (2-EtHex pri čemu se dobija 2-EtHex/MA/DEG/PET/EG/MA/2-EtHex plastifikator. Karakterizacija dobijenog plastifikatora izvršena je infracrvenom spektroskopijom sa Furijeovom transformacijom (FTIR) i NMR spektroskopijom. Dobijeni plastifikatori (10 tež. %) su umešani u bitumen a zatim u su izvršena ispitivanja mehaničkih svojstava dobijenih proizvoda.
AB  - The subject of this study is the synthesis of glycolysates from recycled poly (ethylene terephthalate) (PET) by depolymerization using diethylene glycol (DEG) in the presence of catalyst FASCAT 4100. The resulting glycolysate was then treated with maleic anhydride and finally with 2-octanol to obtain a 2-EtHex/MA/DEG/PET/EG/MA/2-EtHex plasticizer. The characterization of the obtained plasticizer was performed by infrared spectroscopy with Fourier transform (FTIR) and NMR spectroscopy. The obtained plasticizers were mixed into bitumen with 10 wt. % and tests of mechanical properties of obtained products were performed.
PB  - Beograd : Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Testing of mechanical properties of bitumen products obtained using polyethylene tereftalate-based plastifiers
T1  - Ispitivanje mehaničkih svojstava bitumenskih proizvoda dobijenih korišćenjem plastifikatora na bazi polietilen tereftalat-a
VL  - 77
IS  - 5
SP  - 413
EP  - 417
DO  - 10.5937/tehnika2204413V
ER  - 

@article{
author = "Vuksanović, Marija and Jovanović, Aleksandar A. and Milošević, Milena and Gržetić, Jelena and Stajčić, Ivana and Jančić-Heinemann, Radmila and Marinković, Aleksandar",
year = "2022",
abstract = "Predmet ovog istraživanja je sinteza glikolizata iz recikliranog poli(etilen tereftalata) (PET) postupcima depolimerizacije pomoću dietilenglikoala (DEG) u prisustvu katalizatora FASCAT 4100. Dobijeni glikolizat je zatim tretiran anhidridom maleinske kiseline i na kraju 2-oktanolom (2-EtHex pri čemu se dobija 2-EtHex/MA/DEG/PET/EG/MA/2-EtHex plastifikator. Karakterizacija dobijenog plastifikatora izvršena je infracrvenom spektroskopijom sa Furijeovom transformacijom (FTIR) i NMR spektroskopijom. Dobijeni plastifikatori (10 tež. %) su umešani u bitumen a zatim u su izvršena ispitivanja mehaničkih svojstava dobijenih proizvoda., The subject of this study is the synthesis of glycolysates from recycled poly (ethylene terephthalate) (PET) by depolymerization using diethylene glycol (DEG) in the presence of catalyst FASCAT 4100. The resulting glycolysate was then treated with maleic anhydride and finally with 2-octanol to obtain a 2-EtHex/MA/DEG/PET/EG/MA/2-EtHex plasticizer. The characterization of the obtained plasticizer was performed by infrared spectroscopy with Fourier transform (FTIR) and NMR spectroscopy. The obtained plasticizers were mixed into bitumen with 10 wt. % and tests of mechanical properties of obtained products were performed.",
publisher = "Beograd : Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Testing of mechanical properties of bitumen products obtained using polyethylene tereftalate-based plastifiers, Ispitivanje mehaničkih svojstava bitumenskih proizvoda dobijenih korišćenjem plastifikatora na bazi polietilen tereftalat-a",
volume = "77",
number = "5",
pages = "413-417",
doi = "10.5937/tehnika2204413V"
}

Vuksanović, M., Jovanović, A. A., Milošević, M., Gržetić, J., Stajčić, I., Jančić-Heinemann, R.,& Marinković, A.. (2022). Testing of mechanical properties of bitumen products obtained using polyethylene tereftalate-based plastifiers. in Tehnika
Beograd : Savez inženjera i tehničara Srbije., 77(5), 413-417.
https://doi.org/10.5937/tehnika2204413V

Vuksanović M, Jovanović AA, Milošević M, Gržetić J, Stajčić I, Jančić-Heinemann R, Marinković A. Testing of mechanical properties of bitumen products obtained using polyethylene tereftalate-based plastifiers. in Tehnika. 2022;77(5):413-417.
doi:10.5937/tehnika2204413V .

Vuksanović, Marija, Jovanović, Aleksandar A., Milošević, Milena, Gržetić, Jelena, Stajčić, Ivana, Jančić-Heinemann, Radmila, Marinković, Aleksandar, "Testing of mechanical properties of bitumen products obtained using polyethylene tereftalate-based plastifiers" in Tehnika, 77, no. 5 (2022):413-417,
https://doi.org/10.5937/tehnika2204413V . .

TY  - CONF
AU  - Vuksanović, Marija
AU  - Egelja, Adela
AU  - Savić, Andrija
AU  - Milošević, Milena
AU  - Mladenović, Ivana
AU  - Marinković, Aleksandar
AU  - Jančić- Heinemann, Radmila
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5996
AB  - Silica particles were produced form rice husk and used as reinforcement in
the polymer matrix. The obtained silica particles' surfaces were modified with
layered double hydroxides, which enabled better reinforcement in the PMMA matrix.
Coprecipitation was used to synthetize Fe Al layered double hydroxides (LDH) with
a Fe:Al cation content of 3:1 and an FeAl-LDH: silica ratio of 1:1. X-ray diffraction,
Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy
with EDS were used to characterize the synthesized particles. The prepared particle
amounts in the PMMA matrix were 1, 3, and 5 wt. %. The purpose of this study was
to see if the obtained SiO2 particles, as well as their modification with FeAl-LDH,
had any effect on the mechanical properties of polymer composite materials. The
mechanical characterization of obtained composites was done using Vickers
microindentation tests and impact testing. The Vickers micro-hardness test showed
that the addition of reinforcement increases the hardness of the composite. When
compared to the matrix, the toughness of the composite material with a higher
content of particles (5 wt. %) in the energy absorbed in this impact test was three
times higher.
PB  - Banja Luka, Republic of Srpska, B&H : University PIM
C3  - Book of Abstracts - XI international conference of social and technological development, June, 02-05, 2022, Trebinje, Republic of Srpska, B&H
T1  - Mechanical properties of composite material reinforced with silica particles obtained from biomass modified with double-layered hydroxides
UR  - https://hdl.handle.net/21.15107/rcub_cer_5996
ER  - 

@conference{
author = "Vuksanović, Marija and Egelja, Adela and Savić, Andrija and Milošević, Milena and Mladenović, Ivana and Marinković, Aleksandar and Jančić- Heinemann, Radmila",
year = "2022",
abstract = "Silica particles were produced form rice husk and used as reinforcement in
the polymer matrix. The obtained silica particles' surfaces were modified with
layered double hydroxides, which enabled better reinforcement in the PMMA matrix.
Coprecipitation was used to synthetize Fe Al layered double hydroxides (LDH) with
a Fe:Al cation content of 3:1 and an FeAl-LDH: silica ratio of 1:1. X-ray diffraction,
Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy
with EDS were used to characterize the synthesized particles. The prepared particle
amounts in the PMMA matrix were 1, 3, and 5 wt. %. The purpose of this study was
to see if the obtained SiO2 particles, as well as their modification with FeAl-LDH,
had any effect on the mechanical properties of polymer composite materials. The
mechanical characterization of obtained composites was done using Vickers
microindentation tests and impact testing. The Vickers micro-hardness test showed
that the addition of reinforcement increases the hardness of the composite. When
compared to the matrix, the toughness of the composite material with a higher
content of particles (5 wt. %) in the energy absorbed in this impact test was three
times higher.",
publisher = "Banja Luka, Republic of Srpska, B&H : University PIM",
journal = "Book of Abstracts - XI international conference of social and technological development, June, 02-05, 2022, Trebinje, Republic of Srpska, B&H",
title = "Mechanical properties of composite material reinforced with silica particles obtained from biomass modified with double-layered hydroxides",
url = "https://hdl.handle.net/21.15107/rcub_cer_5996"
}

Vuksanović, M., Egelja, A., Savić, A., Milošević, M., Mladenović, I., Marinković, A.,& Jančić- Heinemann, R.. (2022). Mechanical properties of composite material reinforced with silica particles obtained from biomass modified with double-layered hydroxides. in Book of Abstracts - XI international conference of social and technological development, June, 02-05, 2022, Trebinje, Republic of Srpska, B&H
Banja Luka, Republic of Srpska, B&H : University PIM..
https://hdl.handle.net/21.15107/rcub_cer_5996

Vuksanović M, Egelja A, Savić A, Milošević M, Mladenović I, Marinković A, Jančić- Heinemann R. Mechanical properties of composite material reinforced with silica particles obtained from biomass modified with double-layered hydroxides. in Book of Abstracts - XI international conference of social and technological development, June, 02-05, 2022, Trebinje, Republic of Srpska, B&H. 2022;.
https://hdl.handle.net/21.15107/rcub_cer_5996 .

Vuksanović, Marija, Egelja, Adela, Savić, Andrija, Milošević, Milena, Mladenović, Ivana, Marinković, Aleksandar, Jančić- Heinemann, Radmila, "Mechanical properties of composite material reinforced with silica particles obtained from biomass modified with double-layered hydroxides" in Book of Abstracts - XI international conference of social and technological development, June, 02-05, 2022, Trebinje, Republic of Srpska, B&H (2022),
https://hdl.handle.net/21.15107/rcub_cer_5996 .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana O.
AU  - Tomić, Nataša Z.
AU  - Petrović, Miloš
AU  - Radojević, Vesna J.
AU  - Marinković, Aleksandar D.
AU  - Jančić  Heinemann, Radmila
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5266
AB  - Rice husk was used to produce silica particles, which were then used to reinforce the polymer matrix. The synthesized SiO2 particles were characterized using X-ray diffraction, Fourier transforms infrared spectroscopy (FTIR) and scanning electron microscopy with EDS. In a PMMA matrix, prepared SiO2 particles in amounts of 1, 3, and 5 wt.% were used as reinforcing agents. The goal of this research was to see if SiO2 particles had any effect on the mechanical properties of polymer composite materials. The morphology of the composites was examined using a field emission scanning electron microscope (FE-SEM). Vickers microindentation hardness and impact testing were used to determine the mechanical properties of the obtained composites. The indentation creep’s behavior of a polymethylmetacrylate (PMMA) composite material with varying amounts of nanoparticles (SiO2) was investigated and analyzed.
T2  - Science of Sintering
T1  - Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material
VL  - 54
IS  - 2
SP  - 211
EP  - 221
DO  - 10.2298/SOS2202211V
ER  - 

@article{
author = "Vuksanović, Marija M. and Mladenović, Ivana O. and Tomić, Nataša Z. and Petrović, Miloš and Radojević, Vesna J. and Marinković, Aleksandar D. and Jančić  Heinemann, Radmila",
year = "2022",
abstract = "Rice husk was used to produce silica particles, which were then used to reinforce the polymer matrix. The synthesized SiO2 particles were characterized using X-ray diffraction, Fourier transforms infrared spectroscopy (FTIR) and scanning electron microscopy with EDS. In a PMMA matrix, prepared SiO2 particles in amounts of 1, 3, and 5 wt.% were used as reinforcing agents. The goal of this research was to see if SiO2 particles had any effect on the mechanical properties of polymer composite materials. The morphology of the composites was examined using a field emission scanning electron microscope (FE-SEM). Vickers microindentation hardness and impact testing were used to determine the mechanical properties of the obtained composites. The indentation creep’s behavior of a polymethylmetacrylate (PMMA) composite material with varying amounts of nanoparticles (SiO2) was investigated and analyzed.",
journal = "Science of Sintering",
title = "Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material",
volume = "54",
number = "2",
pages = "211-221",
doi = "10.2298/SOS2202211V"
}

Vuksanović, M. M., Mladenović, I. O., Tomić, N. Z., Petrović, M., Radojević, V. J., Marinković, A. D.,& Jančić  Heinemann, R.. (2022). Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material. in Science of Sintering, 54(2), 211-221.
https://doi.org/10.2298/SOS2202211V

Vuksanović MM, Mladenović IO, Tomić NZ, Petrović M, Radojević VJ, Marinković AD, Jančić  Heinemann R. Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material. in Science of Sintering. 2022;54(2):211-221.
doi:10.2298/SOS2202211V .

Vuksanović, Marija M., Mladenović, Ivana O., Tomić, Nataša Z., Petrović, Miloš, Radojević, Vesna J., Marinković, Aleksandar D., Jančić  Heinemann, Radmila, "Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material" in Science of Sintering, 54, no. 2 (2022):211-221,
https://doi.org/10.2298/SOS2202211V . .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Mladenović, Ivana O.
AU  - Tomić, Nataša Z.
AU  - Petrović, Miloš
AU  - Radojević, Vesna J.
AU  - Marinković, Aleksandar D.
AU  - Jančić- Heinemann, Radmila
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5423
AB  - Rice husk was used to produce silica particles, which were then used to reinforce the polymer matrix. The synthesized SiO2 particles were characterized using X-ray diffraction, Fourier transforms infrared spectroscopy (FTIR) and scanning electron microscopy with EDS. In a PMMA matrix, prepared SiO2 particles in amounts of 1, 3, and 5 wt.% were used as reinforcing agents. The goal of this research was to see if SiO2 particles had any effect on the mechanical properties of polymer composite materials. The morphology of the composites was examined using a field emission scanning electron microscope (FE-SEM). Vickers microindentation hardness and impact testing were used to determine the mechanical properties of the obtained composites. The indentation creep’s behavior of a polymethylmetacrylate (PMMA) composite material with varying amounts of nanoparticles (SiO2) was investigated and analyzed.
AB  - Љуска пиринча је коришћена за производњу честица силицијум диоксида, које су коришћене за ојачавање полимерне матрице. Синтетизоване честице силицијум диоксида карактерисане су дифракцијом рендгенских зрака, инфрацрвеном спектроскопијом Фуријеове трансформације (ФТИР) и скенирајућом лектронском микроскопом са ЕДС. У матрици полиметил метакриилата, припремљене честицее силицијум диоксида у количинама од 1, 3 и 5 мас. %, коришћене су као ојачање. Циљ овог истраживања био је да се утврди да ли честице силицијум диоксида утичу на механичка својства полимерних композитних материјала. Морфологија композита је испитивана коришћењем поља емисионог скенирајућег електронског микроскопа (ФЕ-СЕМ). За одређивање механичких својстава добијених композита коришћени су Вицкерс микроиндентациони тестови и испитивање на удар. Понашање пузања композитног материјала полиметилметакрилата (ПММА) са различитим количинама наночестица силицијум диоксида је испитано и анализирано.
PB  - Belgrade :  International Institute for the Science of Sintering (IISS)
T2  - Science of sintering
T1  - Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material
VL  - 54
IS  - 2
SP  - 211
EP  - 221
DO  - 10.2298/SOS2202211V
ER  - 

@article{
author = "Vuksanović, Marija M. and Mladenović, Ivana O. and Tomić, Nataša Z. and Petrović, Miloš and Radojević, Vesna J. and Marinković, Aleksandar D. and Jančić- Heinemann, Radmila",
year = "2022",
abstract = "Rice husk was used to produce silica particles, which were then used to reinforce the polymer matrix. The synthesized SiO2 particles were characterized using X-ray diffraction, Fourier transforms infrared spectroscopy (FTIR) and scanning electron microscopy with EDS. In a PMMA matrix, prepared SiO2 particles in amounts of 1, 3, and 5 wt.% were used as reinforcing agents. The goal of this research was to see if SiO2 particles had any effect on the mechanical properties of polymer composite materials. The morphology of the composites was examined using a field emission scanning electron microscope (FE-SEM). Vickers microindentation hardness and impact testing were used to determine the mechanical properties of the obtained composites. The indentation creep’s behavior of a polymethylmetacrylate (PMMA) composite material with varying amounts of nanoparticles (SiO2) was investigated and analyzed., Љуска пиринча је коришћена за производњу честица силицијум диоксида, које су коришћене за ојачавање полимерне матрице. Синтетизоване честице силицијум диоксида карактерисане су дифракцијом рендгенских зрака, инфрацрвеном спектроскопијом Фуријеове трансформације (ФТИР) и скенирајућом лектронском микроскопом са ЕДС. У матрици полиметил метакриилата, припремљене честицее силицијум диоксида у количинама од 1, 3 и 5 мас. %, коришћене су као ојачање. Циљ овог истраживања био је да се утврди да ли честице силицијум диоксида утичу на механичка својства полимерних композитних материјала. Морфологија композита је испитивана коришћењем поља емисионог скенирајућег електронског микроскопа (ФЕ-СЕМ). За одређивање механичких својстава добијених композита коришћени су Вицкерс микроиндентациони тестови и испитивање на удар. Понашање пузања композитног материјала полиметилметакрилата (ПММА) са различитим количинама наночестица силицијум диоксида је испитано и анализирано.",
publisher = "Belgrade :  International Institute for the Science of Sintering (IISS)",
journal = "Science of sintering",
title = "Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material",
volume = "54",
number = "2",
pages = "211-221",
doi = "10.2298/SOS2202211V"
}

Vuksanović, M. M., Mladenović, I. O., Tomić, N. Z., Petrović, M., Radojević, V. J., Marinković, A. D.,& Jančić- Heinemann, R.. (2022). Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material. in Science of sintering
Belgrade :  International Institute for the Science of Sintering (IISS)., 54(2), 211-221.
https://doi.org/10.2298/SOS2202211V

Vuksanović MM, Mladenović IO, Tomić NZ, Petrović M, Radojević VJ, Marinković AD, Jančić- Heinemann R. Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material. in Science of sintering. 2022;54(2):211-221.
doi:10.2298/SOS2202211V .

Vuksanović, Marija M., Mladenović, Ivana O., Tomić, Nataša Z., Petrović, Miloš, Radojević, Vesna J., Marinković, Aleksandar D., Jančić- Heinemann, Radmila, "Mechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Material" in Science of sintering, 54, no. 2 (2022):211-221,
https://doi.org/10.2298/SOS2202211V . .

TY  - JOUR
AU  - Marinković, Aleksandar D.
AU  - Vuksanović, Marija M.
AU  - Karić, Nataša
AU  - Đokić, Veljko
AU  - Popović, Mina
AU  - Jančić  Heinemann, Radmila
AU  - Tomić, Nataša Z.
PY  - 2021
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4828
AB  - As a renewable resource, starch is considered to be fully biodegradable and nonpolluting to the environment but the hygroscopicity of starch is the main disadvantage for wider applicability in the production of a polymer-based material. Hydrophobically modified starch prepared using natural-based plasticizers/modifiers in a first step ([−]-diisopropyl D-tartrate [DiPT], ricinoleic acid [RA] and epoxidized soybean oil [ESO]), and maleated polypropylene (MAPP) in a second step contributed to better compatibility, and thus reinforcing of composites. Tailored processing conditions, structural/morphological properties, hydrophobicity, and water-resistance of the modified starch were established. In addition, the Charpy impact and tensile strength of composites, based on poly(ethylene-co-acrylic acid) (EAA) and modified starches, were determined. Increased tensile strength and Young modulus of the composite using starch-modified with DiPT-MAPP, that is, 3 and 83%, respectively, indicated the possible applicability of obtained materials.
PB  - Wiley
T2  - Polimer Composites
T1  - The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer
VL  - 42
IS  - 3
SP  - 1325
EP  - 1337
DO  - 10.1002/pc.25903
ER  - 

@article{
author = "Marinković, Aleksandar D. and Vuksanović, Marija M. and Karić, Nataša and Đokić, Veljko and Popović, Mina and Jančić  Heinemann, Radmila and Tomić, Nataša Z.",
year = "2021",
abstract = "As a renewable resource, starch is considered to be fully biodegradable and nonpolluting to the environment but the hygroscopicity of starch is the main disadvantage for wider applicability in the production of a polymer-based material. Hydrophobically modified starch prepared using natural-based plasticizers/modifiers in a first step ([−]-diisopropyl D-tartrate [DiPT], ricinoleic acid [RA] and epoxidized soybean oil [ESO]), and maleated polypropylene (MAPP) in a second step contributed to better compatibility, and thus reinforcing of composites. Tailored processing conditions, structural/morphological properties, hydrophobicity, and water-resistance of the modified starch were established. In addition, the Charpy impact and tensile strength of composites, based on poly(ethylene-co-acrylic acid) (EAA) and modified starches, were determined. Increased tensile strength and Young modulus of the composite using starch-modified with DiPT-MAPP, that is, 3 and 83%, respectively, indicated the possible applicability of obtained materials.",
publisher = "Wiley",
journal = "Polimer Composites",
title = "The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer",
volume = "42",
number = "3",
pages = "1325-1337",
doi = "10.1002/pc.25903"
}

Marinković, A. D., Vuksanović, M. M., Karić, N., Đokić, V., Popović, M., Jančić  Heinemann, R.,& Tomić, N. Z.. (2021). The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer. in Polimer Composites
Wiley., 42(3), 1325-1337.
https://doi.org/10.1002/pc.25903

Marinković AD, Vuksanović MM, Karić N, Đokić V, Popović M, Jančić  Heinemann R, Tomić NZ. The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer. in Polimer Composites. 2021;42(3):1325-1337.
doi:10.1002/pc.25903 .

Marinković, Aleksandar D., Vuksanović, Marija M., Karić, Nataša, Đokić, Veljko, Popović, Mina, Jančić  Heinemann, Radmila, Tomić, Nataša Z., "The effect of natural modifiers for starch hydrophobization on performance of composite based on ethylene acrylic acid copolymer" in Polimer Composites, 42, no. 3 (2021):1325-1337,
https://doi.org/10.1002/pc.25903 . .

TY  - JOUR
AU  - Kalifa, Mustafa
AU  - Tomić, Nataša Z.
AU  - Vuksanović, Marija M.
AU  - Stevanović, Sanja
AU  - Đokić, Veljko
AU  - Volkov-Husović, Tatjana
AU  - Pavlović, Vladimir B.
AU  - Jančić-Heinemann, Radmila
AU  - Marinković, Aleksandar D.
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3589
AB  - Cavitation erosion of hybrid acrylate composite films with polyhedral
oligosilsesquioxanes (POSS) was investigated in this study. The hybrid films are
made with 1, 3 and 5 wt% of POSS reagents containing: (a) hydroxyl (POSS-M),
(b) both hydroxyl and allyl (POSS-M-A) and (c) methacryloyl groups (POSS-MCl).
Addition of 5 wt% POSS-M-A caused the highest microhardness increase for
49.8%, in comparison to the pure matrix material. Cavitation resistance of hybrid
films, estimated as the time-dependent mass loss, was improved by POSS addition.
POSS-M-A addition (5 wt%) contributed to 94% lower mass loss comparing
to pure Bis-GMA/TEGDMA film. Scanning electron (SEM) and atomic force
microscopy (AFM) showed the lowest surface roughness obtained for composite
with POSS-M-A. The improved hardness and wear resistance of the composite
films indicated that POSS-M-A filler enhanced interfacial adhesion and reinforcing
of the Bis-GMA/TEGDMA matrix.
PB  - John Wiley and Sons Inc
T2  - Polymer Composites
T1  - The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films
VL  - 41
IS  - 8
SP  - 3403
EP  - 3410
DO  - 10.1002/pc.25629
ER  - 

@article{
author = "Kalifa, Mustafa and Tomić, Nataša Z. and Vuksanović, Marija M. and Stevanović, Sanja and Đokić, Veljko and Volkov-Husović, Tatjana and Pavlović, Vladimir B. and Jančić-Heinemann, Radmila and Marinković, Aleksandar D.",
year = "2020",
abstract = "Cavitation erosion of hybrid acrylate composite films with polyhedral
oligosilsesquioxanes (POSS) was investigated in this study. The hybrid films are
made with 1, 3 and 5 wt% of POSS reagents containing: (a) hydroxyl (POSS-M),
(b) both hydroxyl and allyl (POSS-M-A) and (c) methacryloyl groups (POSS-MCl).
Addition of 5 wt% POSS-M-A caused the highest microhardness increase for
49.8%, in comparison to the pure matrix material. Cavitation resistance of hybrid
films, estimated as the time-dependent mass loss, was improved by POSS addition.
POSS-M-A addition (5 wt%) contributed to 94% lower mass loss comparing
to pure Bis-GMA/TEGDMA film. Scanning electron (SEM) and atomic force
microscopy (AFM) showed the lowest surface roughness obtained for composite
with POSS-M-A. The improved hardness and wear resistance of the composite
films indicated that POSS-M-A filler enhanced interfacial adhesion and reinforcing
of the Bis-GMA/TEGDMA matrix.",
publisher = "John Wiley and Sons Inc",
journal = "Polymer Composites",
title = "The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films",
volume = "41",
number = "8",
pages = "3403-3410",
doi = "10.1002/pc.25629"
}

Kalifa, M., Tomić, N. Z., Vuksanović, M. M., Stevanović, S., Đokić, V., Volkov-Husović, T., Pavlović, V. B., Jančić-Heinemann, R.,& Marinković, A. D.. (2020). The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films. in Polymer Composites
John Wiley and Sons Inc., 41(8), 3403-3410.
https://doi.org/10.1002/pc.25629

Kalifa M, Tomić NZ, Vuksanović MM, Stevanović S, Đokić V, Volkov-Husović T, Pavlović VB, Jančić-Heinemann R, Marinković AD. The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films. in Polymer Composites. 2020;41(8):3403-3410.
doi:10.1002/pc.25629 .

Kalifa, Mustafa, Tomić, Nataša Z., Vuksanović, Marija M., Stevanović, Sanja, Đokić, Veljko, Volkov-Husović, Tatjana, Pavlović, Vladimir B., Jančić-Heinemann, Radmila, Marinković, Aleksandar D., "The effect of polyhedral oligosilsesquioxanes (POSS) on cavitation resistance of hybrid acrylate films" in Polymer Composites, 41, no. 8 (2020):3403-3410,
https://doi.org/10.1002/pc.25629 . .

TY  - GEN
AU  - Volkov Husović, Tatjana
AU  - Vuksanović, Marija M.
AU  - Gajić Kvaščev, Maja
AU  - Tomić, Nataša
AU  - Jančić-Heinemann, Radmila
AU  - Andrić, Velibor
AU  - Martinović, Sanja
AU  - Vlahović, Milica
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3852
AB  - Ovim istraživanjem ustanovljena je nova metoda karakterizacije površinskih oštećenja vatrostalnih keramičkih materijala primenom alata analize slike i prepoznavanja oblika. Eksperimentalni rezultati omogućili su da se razviju pouzdane metode za procenu prelaska jedne faze u drugu keramičkih materijala koji su izloženi dejstvu kavitacije. Pored toga nova metoda omogućava da se standardni postupak procene prelaza jedne faze u drugu na osnovu izgleda oštećenja izvrši na ponovljiv način, bez uticaja operatera. Šta više, predložena metoda je nedestruktivna i primenjiva u uslovima kada je vizuelna inspekcija jedini dostupan način.
PB  - Univerzitet u Beogradu, Tehnološko-metalurški fakultet
T1  - Nova metoda za sintezu keramičkih materijala i nedestruktivnu karakterizaciju površinskih oštećenja usled izlaganja kavitaciji
UR  - https://hdl.handle.net/21.15107/rcub_cer_3852
ER  - 

@misc{
author = "Volkov Husović, Tatjana and Vuksanović, Marija M. and Gajić Kvaščev, Maja and Tomić, Nataša and Jančić-Heinemann, Radmila and Andrić, Velibor and Martinović, Sanja and Vlahović, Milica",
year = "2020",
abstract = "Ovim istraživanjem ustanovljena je nova metoda karakterizacije površinskih oštećenja vatrostalnih keramičkih materijala primenom alata analize slike i prepoznavanja oblika. Eksperimentalni rezultati omogućili su da se razviju pouzdane metode za procenu prelaska jedne faze u drugu keramičkih materijala koji su izloženi dejstvu kavitacije. Pored toga nova metoda omogućava da se standardni postupak procene prelaza jedne faze u drugu na osnovu izgleda oštećenja izvrši na ponovljiv način, bez uticaja operatera. Šta više, predložena metoda je nedestruktivna i primenjiva u uslovima kada je vizuelna inspekcija jedini dostupan način.",
publisher = "Univerzitet u Beogradu, Tehnološko-metalurški fakultet",
title = "Nova metoda za sintezu keramičkih materijala i nedestruktivnu karakterizaciju površinskih oštećenja usled izlaganja kavitaciji",
url = "https://hdl.handle.net/21.15107/rcub_cer_3852"
}

Volkov Husović, T., Vuksanović, M. M., Gajić Kvaščev, M., Tomić, N., Jančić-Heinemann, R., Andrić, V., Martinović, S.,& Vlahović, M.. (2020). Nova metoda za sintezu keramičkih materijala i nedestruktivnu karakterizaciju površinskih oštećenja usled izlaganja kavitaciji. 
Univerzitet u Beogradu, Tehnološko-metalurški fakultet..
https://hdl.handle.net/21.15107/rcub_cer_3852

Volkov Husović T, Vuksanović MM, Gajić Kvaščev M, Tomić N, Jančić-Heinemann R, Andrić V, Martinović S, Vlahović M. Nova metoda za sintezu keramičkih materijala i nedestruktivnu karakterizaciju površinskih oštećenja usled izlaganja kavitaciji. 2020;.
https://hdl.handle.net/21.15107/rcub_cer_3852 .

Volkov Husović, Tatjana, Vuksanović, Marija M., Gajić Kvaščev, Maja, Tomić, Nataša, Jančić-Heinemann, Radmila, Andrić, Velibor, Martinović, Sanja, Vlahović, Milica, "Nova metoda za sintezu keramičkih materijala i nedestruktivnu karakterizaciju površinskih oštećenja usled izlaganja kavitaciji" (2020),
https://hdl.handle.net/21.15107/rcub_cer_3852 .

TY  - JOUR
AU  - Vuksanović, Marija M.
AU  - Tomić, Nataša Z.
AU  - Mladenović, Ivana
AU  - Perić, Tamara O.
AU  - Gligorijević, Bojan
AU  - Jančić-Heinemann, Radmila
PY  - 2020
UR  - https://scindeks.ceon.rs/article.aspx?artid=0040-21762004429V
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3823
AB  - Kompozitni materijali na bazi akrilatnih fotopolimerizujućih polimera, (Bis-GMA/TEGDMA) koji predstavljaju matricu i ojačanja koja se mogu odabrati sa ciljem podešavanja svojstava dobijenih kompozita, koriste se u oblasti dentalne tehnologije. Uloga ojačanja je podešavanje mehaničkih svojstava, ali i kontrola skupljanja tokom očvršćavanja. Kao ojačanje odabrane su čestice aluminijum-oksida dopirane gvožđe oksidom (Al2O3 Fe), sintetisane korišćenjem sol-gel tehnike. U cilju simuliranja procesa primene adheziva u realnim uslovima korišćena je in vitro tehnika ispitivanja adhezije sintetisanog adheziva pri čemu je kao substrat korišćeno tkivo zuba. Dobijene vrednosti adhezije poređene su sa komercijalnim adhezivima koji se koriste u stomatologiji. Kvalitet adhezivnog spoja ocenjen je merenjem mikrotvrdoće primenom različitih opterećenja, pri čemu je procenjen način kako se ostvaruje spoj između filma i podloge. Pokazalo se da je sintetisani adheziv imao višestruko jaču adheziju u poređenju sa standardnim adhezivom korišćenim u stomatologiji (836 %).
AB  - Composite materials based on acrylate UV-cured polymers (Bis-GMA/TEGDMA) as a matrix and reinforcements that can be selected in order to adjust the properties of the obtained composite are used in the field of dental technology. The role of reinforcement is to adjust the mechanical properties, but also to control the shrinkage during curing. As reinforcement, alumina particles doped with iron oxide (Al2O3 Fe) synthesized using the sol-gel technique were selected. In order to simulate the process of adhesive application in real conditions, in vitro testing technique and adhesion properties of synthesized adhesive were used, where tooth tissue was used as a substrate. Comparison with standard adhesives used in dentistry was used to compare adhesion. The quality of the adhesive joint was evaluated using the microhardness testing method using different loads where it is estimated how the adhesive makes a connection with the substrate. It was shown that the synthesized adhesive showed significantly enhanced adhesion compared to the standard adhesive used in dentistry (836%).
PB  - Savez inženjera i tehničara Srbije
T2  - Tehnika
T1  - Poboljšana adhezija akrilnih adheziva sa zubnim tkivom uz dodatak čestica na bazi aluminijum oksida
T1  - Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles
VL  - 29
IS  - 4
SP  - 429
EP  - 433
DO  - 10.5937/tehnika2004429V
ER  - 

@article{
author = "Vuksanović, Marija M. and Tomić, Nataša Z. and Mladenović, Ivana and Perić, Tamara O. and Gligorijević, Bojan and Jančić-Heinemann, Radmila",
year = "2020",
abstract = "Kompozitni materijali na bazi akrilatnih fotopolimerizujućih polimera, (Bis-GMA/TEGDMA) koji predstavljaju matricu i ojačanja koja se mogu odabrati sa ciljem podešavanja svojstava dobijenih kompozita, koriste se u oblasti dentalne tehnologije. Uloga ojačanja je podešavanje mehaničkih svojstava, ali i kontrola skupljanja tokom očvršćavanja. Kao ojačanje odabrane su čestice aluminijum-oksida dopirane gvožđe oksidom (Al2O3 Fe), sintetisane korišćenjem sol-gel tehnike. U cilju simuliranja procesa primene adheziva u realnim uslovima korišćena je in vitro tehnika ispitivanja adhezije sintetisanog adheziva pri čemu je kao substrat korišćeno tkivo zuba. Dobijene vrednosti adhezije poređene su sa komercijalnim adhezivima koji se koriste u stomatologiji. Kvalitet adhezivnog spoja ocenjen je merenjem mikrotvrdoće primenom različitih opterećenja, pri čemu je procenjen način kako se ostvaruje spoj između filma i podloge. Pokazalo se da je sintetisani adheziv imao višestruko jaču adheziju u poređenju sa standardnim adhezivom korišćenim u stomatologiji (836 %)., Composite materials based on acrylate UV-cured polymers (Bis-GMA/TEGDMA) as a matrix and reinforcements that can be selected in order to adjust the properties of the obtained composite are used in the field of dental technology. The role of reinforcement is to adjust the mechanical properties, but also to control the shrinkage during curing. As reinforcement, alumina particles doped with iron oxide (Al2O3 Fe) synthesized using the sol-gel technique were selected. In order to simulate the process of adhesive application in real conditions, in vitro testing technique and adhesion properties of synthesized adhesive were used, where tooth tissue was used as a substrate. Comparison with standard adhesives used in dentistry was used to compare adhesion. The quality of the adhesive joint was evaluated using the microhardness testing method using different loads where it is estimated how the adhesive makes a connection with the substrate. It was shown that the synthesized adhesive showed significantly enhanced adhesion compared to the standard adhesive used in dentistry (836%).",
publisher = "Savez inženjera i tehničara Srbije",
journal = "Tehnika",
title = "Poboljšana adhezija akrilnih adheziva sa zubnim tkivom uz dodatak čestica na bazi aluminijum oksida, Enhanced adhesion of acrylic adhesives with dental tissue with the addition of aluminum oxide based particles",
volume = "29",
number = "4",
pages = "429-433",
doi = "10.5937/tehnika2004429V"
}

Vuksanović, M. M., Tomić, N. Z., Mladenović, I., Perić, T. O., Gligorijević, B.,& Jančić-Heinemann, R.. (2020). Poboljšana adhezija akrilnih adheziva sa zubnim tkivom uz dodatak čestica na bazi aluminijum oksida. in Tehnika
Savez inženjera i tehničara Srbije., 29(4), 429-433.
https://doi.org/10.5937/tehnika2004429V

Vuksanović MM, Tomić NZ, Mladenović I, Perić TO, Gligorijević B, Jančić-Heinemann R. Poboljšana adhezija akrilnih adheziva sa zubnim tkivom uz dodatak čestica na bazi aluminijum oksida. in Tehnika. 2020;29(4):429-433.
doi:10.5937/tehnika2004429V .

Vuksanović, Marija M., Tomić, Nataša Z., Mladenović, Ivana, Perić, Tamara O., Gligorijević, Bojan, Jančić-Heinemann, Radmila, "Poboljšana adhezija akrilnih adheziva sa zubnim tkivom uz dodatak čestica na bazi aluminijum oksida" in Tehnika, 29, no. 4 (2020):429-433,
https://doi.org/10.5937/tehnika2004429V . .

TY  - JOUR
AU  - Perišić, Srđan
AU  - Vuksanović, Marija M.
AU  - Petrović, Milos
AU  - Radisavljević, Andjela
AU  - Grujić, Aleksandar
AU  - Jančić-Heinemann, Radmila
AU  - Radojević, Vesna
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3129
AB  - Hybrid composite panels of Wood-Plastic Composites (WPC) consisting of wood and
poly (methyl methacrylate) (PMMA) were reinforced with alumina particles and made by
“hot pressing” method. Alumina-based particles were made by sol-gel technique. The
particles were characterized by the X-ray diffraction (XRD). The resulting alumina particles
were modified with (3mercaptopropyl) trimethoxysilane (MPTMS), in order to obtain better
mechanical properties of the composite relative to the composite with unmodified alumina
particles. The aim of this work was to study the influence of composite structure and the
moisture absorption on bending and the impact properties of the hybrid composite. The
bending and impact tests revealed that modulus of elasticity and absorbed energy of
deformation increased with modification of alumina and slightly decrease after moisture
absorption.
AB  - Хибридни композитни панели дрво-пластика композит (ДПК) који се
састоје од дрвета и поли(метил метакрилата) (ПММА) ојачани честицама
алуминијум оксида прецесирани методом „врућег пресовања“. Честице засноване на
алуминијум оксиду направљене су сол – гел техником. Карактеризација честица
вршена је рендгенском анализом. Добијене честице алуминијум оксида модификоване
су помоћу (меркаптопропил)триметоксисилана, како би се постигла боља механичка
својства композита у односу на композит са немодификованим честицама алуминијум
оксида. Циљ овог рада је проучавање утицаја структуре хибридног композита и
апсорбоване влаге на механичка својства, савијање и контролисани удар. Тестови
савијања и удара показали су да се модул еластичности и апсорбована енергија
деформације повећава модификацијом алуминијум оксидних честица, а незнатно
самањује након апсорпције влаге.
PB  - Belgrade : Association for ETRAN Society
T2  - Science of Sintering
T1  - Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials
VL  - 51
IS  - 1
SP  - 115
EP  - 124
DO  - 10.2298/SOS1901115P
ER  - 

@article{
author = "Perišić, Srđan and Vuksanović, Marija M. and Petrović, Milos and Radisavljević, Andjela and Grujić, Aleksandar and Jančić-Heinemann, Radmila and Radojević, Vesna",
year = "2019",
abstract = "Hybrid composite panels of Wood-Plastic Composites (WPC) consisting of wood and
poly (methyl methacrylate) (PMMA) were reinforced with alumina particles and made by
“hot pressing” method. Alumina-based particles were made by sol-gel technique. The
particles were characterized by the X-ray diffraction (XRD). The resulting alumina particles
were modified with (3mercaptopropyl) trimethoxysilane (MPTMS), in order to obtain better
mechanical properties of the composite relative to the composite with unmodified alumina
particles. The aim of this work was to study the influence of composite structure and the
moisture absorption on bending and the impact properties of the hybrid composite. The
bending and impact tests revealed that modulus of elasticity and absorbed energy of
deformation increased with modification of alumina and slightly decrease after moisture
absorption., Хибридни композитни панели дрво-пластика композит (ДПК) који се
састоје од дрвета и поли(метил метакрилата) (ПММА) ојачани честицама
алуминијум оксида прецесирани методом „врућег пресовања“. Честице засноване на
алуминијум оксиду направљене су сол – гел техником. Карактеризација честица
вршена је рендгенском анализом. Добијене честице алуминијум оксида модификоване
су помоћу (меркаптопропил)триметоксисилана, како би се постигла боља механичка
својства композита у односу на композит са немодификованим честицама алуминијум
оксида. Циљ овог рада је проучавање утицаја структуре хибридног композита и
апсорбоване влаге на механичка својства, савијање и контролисани удар. Тестови
савијања и удара показали су да се модул еластичности и апсорбована енергија
деформације повећава модификацијом алуминијум оксидних честица, а незнатно
самањује након апсорпције влаге.",
publisher = "Belgrade : Association for ETRAN Society",
journal = "Science of Sintering",
title = "Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials",
volume = "51",
number = "1",
pages = "115-124",
doi = "10.2298/SOS1901115P"
}

Perišić, S., Vuksanović, M. M., Petrović, M., Radisavljević, A., Grujić, A., Jančić-Heinemann, R.,& Radojević, V.. (2019). Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials. in Science of Sintering
Belgrade : Association for ETRAN Society., 51(1), 115-124.
https://doi.org/10.2298/SOS1901115P

Perišić S, Vuksanović MM, Petrović M, Radisavljević A, Grujić A, Jančić-Heinemann R, Radojević V. Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials. in Science of Sintering. 2019;51(1):115-124.
doi:10.2298/SOS1901115P .

Perišić, Srđan, Vuksanović, Marija M., Petrović, Milos, Radisavljević, Andjela, Grujić, Aleksandar, Jančić-Heinemann, Radmila, Radojević, Vesna, "Impact of Alumina Particles on the Morphology and Mechanics of Hybrid Wood Plastic Composite Materials" in Science of Sintering, 51, no. 1 (2019):115-124,
https://doi.org/10.2298/SOS1901115P . .

TY  - JOUR
AU  - Stajčić, Aleksandar
AU  - Radović, Ivana
AU  - Ćosović, Vladan
AU  - Grujić, Aleksandar
AU  - Stajić-Trošić, Jasna
AU  - Jančić-Heinemann, Radmila
PY  - 2019
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3232
AB  - This study presents preparation and characterization of ethyl cellulose based nanocomposites. Successful use of simple solvent casting technique provided nanocomposites with high loads of barium ferrite magnetic nanopowder in the polymer matrix, promising significant improvement of mechanical properties. Investigation of morphology revealed formation of agglomerates that are still on nanoscopic level. Nanocomposite thin films with a higher content of the magnetic powder showed substantial enhancement of break strength, elongation and microhardness compared to the pure ethyl cellulose, which was the primary aim of this research.
AB  - Ова студија представља припрему и карактеризацију нанокомпозита на бази етил целулозе. Успешна употреба једноставне технике изливања обезбедила је нанокомпозите са великим уделом магнетног нанопраха баријум ферита у полимерној матрици, обећавајући значајно побољшање механичких својстава. Истраживањем морфологије откривено је формирање агломерата који су и даље на наноскопском нивоу. Нанокомпозитни танки филмови са већим садржајем магнетног праха показали су значајно повећање прекидне чврстоће, издужења и микротврдоће у поређењу са чистом етил целулозом, што је био главни циљ овог истраживања.
PB  - Belgrade : Association for ETRAN Society
T2  - Science of Sintering
T1  - The influence of barium ferrite nanoparticles on morphological and mechanical properties of ethyl cellulose based nanocomposites
VL  - 51
IS  - 3
SP  - 277
EP  - 283
DO  - 10.2298/SOS1903277S
ER  - 

@article{
author = "Stajčić, Aleksandar and Radović, Ivana and Ćosović, Vladan and Grujić, Aleksandar and Stajić-Trošić, Jasna and Jančić-Heinemann, Radmila",
year = "2019",
abstract = "This study presents preparation and characterization of ethyl cellulose based nanocomposites. Successful use of simple solvent casting technique provided nanocomposites with high loads of barium ferrite magnetic nanopowder in the polymer matrix, promising significant improvement of mechanical properties. Investigation of morphology revealed formation of agglomerates that are still on nanoscopic level. Nanocomposite thin films with a higher content of the magnetic powder showed substantial enhancement of break strength, elongation and microhardness compared to the pure ethyl cellulose, which was the primary aim of this research., Ова студија представља припрему и карактеризацију нанокомпозита на бази етил целулозе. Успешна употреба једноставне технике изливања обезбедила је нанокомпозите са великим уделом магнетног нанопраха баријум ферита у полимерној матрици, обећавајући значајно побољшање механичких својстава. Истраживањем морфологије откривено је формирање агломерата који су и даље на наноскопском нивоу. Нанокомпозитни танки филмови са већим садржајем магнетног праха показали су значајно повећање прекидне чврстоће, издужења и микротврдоће у поређењу са чистом етил целулозом, што је био главни циљ овог истраживања.",
publisher = "Belgrade : Association for ETRAN Society",
journal = "Science of Sintering",
title = "The influence of barium ferrite nanoparticles on morphological and mechanical properties of ethyl cellulose based nanocomposites",
volume = "51",
number = "3",
pages = "277-283",
doi = "10.2298/SOS1903277S"
}

Stajčić, A., Radović, I., Ćosović, V., Grujić, A., Stajić-Trošić, J.,& Jančić-Heinemann, R.. (2019). The influence of barium ferrite nanoparticles on morphological and mechanical properties of ethyl cellulose based nanocomposites. in Science of Sintering
Belgrade : Association for ETRAN Society., 51(3), 277-283.
https://doi.org/10.2298/SOS1903277S

Stajčić A, Radović I, Ćosović V, Grujić A, Stajić-Trošić J, Jančić-Heinemann R. The influence of barium ferrite nanoparticles on morphological and mechanical properties of ethyl cellulose based nanocomposites. in Science of Sintering. 2019;51(3):277-283.
doi:10.2298/SOS1903277S .

Stajčić, Aleksandar, Radović, Ivana, Ćosović, Vladan, Grujić, Aleksandar, Stajić-Trošić, Jasna, Jančić-Heinemann, Radmila, "The influence of barium ferrite nanoparticles on morphological and mechanical properties of ethyl cellulose based nanocomposites" in Science of Sintering, 51, no. 3 (2019):277-283,
https://doi.org/10.2298/SOS1903277S . .

TY  - JOUR
AU  - Stajčić, Aleksandar
AU  - Nedeljković, Dragutin
AU  - Panić, Vesna
AU  - Radović, Ivana
AU  - Grujić, Aleksandar
AU  - Stajić-Trošić, Jasna
AU  - Jančić-Heinemann, Radmila
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2359
AB  - This study presents the route for preparation of the membrane-supporting materials with good mechanical behavior and adsorption properties that provide functionality and are easy to use in various environments. Polyethersulfone (PES) membrane-supported hydrogels were prepared via liquid phase inversion process with photopolymerization and monomer crosslinking. The obtained membranes had asymmetric structure containing dense skin on the top of a porous hydrogel as it is verified by scanning electron microscopy. Software analysis of the pore size revealed that fine pores enabled availability of the membrane active centers to metal cations. The membranes with a higher content of the polymer showed significantly improved mechanical properties compared with commonly used ion exchange membranes, which is crucial for the wastewater treatment application. Adsorption kinetics analysis showed that the hydrogel-rich bottom layer has significantly higher adsorption ability in comparison to the top layer. Adsorption kinetics of the bottom side was described by the first-order kinetics model, whereas for the the top side, phase-boundary controlled reaction model was used.
PB  - Hopkinton : Desalination Publications
T2  - Desalination and Water Treatment
T1  - Adsorption kinetics of polyethersulfone membrane-supported hydrogels
VL  - 131
SP  - 43
EP  - 49
DO  - 10.5004/dwt.2018.22959
ER  - 

@article{
author = "Stajčić, Aleksandar and Nedeljković, Dragutin and Panić, Vesna and Radović, Ivana and Grujić, Aleksandar and Stajić-Trošić, Jasna and Jančić-Heinemann, Radmila",
year = "2018",
abstract = "This study presents the route for preparation of the membrane-supporting materials with good mechanical behavior and adsorption properties that provide functionality and are easy to use in various environments. Polyethersulfone (PES) membrane-supported hydrogels were prepared via liquid phase inversion process with photopolymerization and monomer crosslinking. The obtained membranes had asymmetric structure containing dense skin on the top of a porous hydrogel as it is verified by scanning electron microscopy. Software analysis of the pore size revealed that fine pores enabled availability of the membrane active centers to metal cations. The membranes with a higher content of the polymer showed significantly improved mechanical properties compared with commonly used ion exchange membranes, which is crucial for the wastewater treatment application. Adsorption kinetics analysis showed that the hydrogel-rich bottom layer has significantly higher adsorption ability in comparison to the top layer. Adsorption kinetics of the bottom side was described by the first-order kinetics model, whereas for the the top side, phase-boundary controlled reaction model was used.",
publisher = "Hopkinton : Desalination Publications",
journal = "Desalination and Water Treatment",
title = "Adsorption kinetics of polyethersulfone membrane-supported hydrogels",
volume = "131",
pages = "43-49",
doi = "10.5004/dwt.2018.22959"
}

Stajčić, A., Nedeljković, D., Panić, V., Radović, I., Grujić, A., Stajić-Trošić, J.,& Jančić-Heinemann, R.. (2018). Adsorption kinetics of polyethersulfone membrane-supported hydrogels. in Desalination and Water Treatment
Hopkinton : Desalination Publications., 131, 43-49.
https://doi.org/10.5004/dwt.2018.22959

Stajčić A, Nedeljković D, Panić V, Radović I, Grujić A, Stajić-Trošić J, Jančić-Heinemann R. Adsorption kinetics of polyethersulfone membrane-supported hydrogels. in Desalination and Water Treatment. 2018;131:43-49.
doi:10.5004/dwt.2018.22959 .

Stajčić, Aleksandar, Nedeljković, Dragutin, Panić, Vesna, Radović, Ivana, Grujić, Aleksandar, Stajić-Trošić, Jasna, Jančić-Heinemann, Radmila, "Adsorption kinetics of polyethersulfone membrane-supported hydrogels" in Desalination and Water Treatment, 131 (2018):43-49,
https://doi.org/10.5004/dwt.2018.22959 . .

TY  - JOUR
AU  - Radojković, Bojana
AU  - Ristić, Slavica S.
AU  - Polić, Suzana R.
AU  - Jančić-Heinemann, Radmila
AU  - Radovanovic, Danijelka
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2877
AB  - The classic methods of cleaning oldfashioned textile museum objects with metallic threads often do not yield the expected results. The use of laser in the conservation of these objects plays an important role as very efficient and ecologically friendly technique. Conservation and restoration of historical exhibits with metal-textile combinations is becoming ever more complex due to a huge variety of damaging factors. The paper presents the results of the corrosion laser cleaning effects on ethnographic textile with metallic threads from the holdings of the Ethnographic Museum in Belgrade, using Nd:YAG laser. Testing of the cleaning effects was performed by optical and scanning electron microscopy. Chemical analysis of metal threads is made by EDX and XRD analysis. Parameters for successful and safe cleaning of corrosion products on metallic threads were determined.
T2  - Journal of Cultural Heritage
T1  - Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns
VL  - 23
SP  - 128
EP  - 137
DO  - 10.1016/j.culher.2016.07.001
ER  - 

@article{
author = "Radojković, Bojana and Ristić, Slavica S. and Polić, Suzana R. and Jančić-Heinemann, Radmila and Radovanovic, Danijelka",
year = "2017",
abstract = "The classic methods of cleaning oldfashioned textile museum objects with metallic threads often do not yield the expected results. The use of laser in the conservation of these objects plays an important role as very efficient and ecologically friendly technique. Conservation and restoration of historical exhibits with metal-textile combinations is becoming ever more complex due to a huge variety of damaging factors. The paper presents the results of the corrosion laser cleaning effects on ethnographic textile with metallic threads from the holdings of the Ethnographic Museum in Belgrade, using Nd:YAG laser. Testing of the cleaning effects was performed by optical and scanning electron microscopy. Chemical analysis of metal threads is made by EDX and XRD analysis. Parameters for successful and safe cleaning of corrosion products on metallic threads were determined.",
journal = "Journal of Cultural Heritage",
title = "Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns",
volume = "23",
pages = "128-137",
doi = "10.1016/j.culher.2016.07.001"
}

Radojković, B., Ristić, S. S., Polić, S. R., Jančić-Heinemann, R.,& Radovanovic, D.. (2017). Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns. in Journal of Cultural Heritage, 23, 128-137.
https://doi.org/10.1016/j.culher.2016.07.001

Radojković B, Ristić SS, Polić SR, Jančić-Heinemann R, Radovanovic D. Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns. in Journal of Cultural Heritage. 2017;23:128-137.
doi:10.1016/j.culher.2016.07.001 .

Radojković, Bojana, Ristić, Slavica S., Polić, Suzana R., Jančić-Heinemann, Radmila, Radovanovic, Danijelka, "Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns" in Journal of Cultural Heritage, 23 (2017):128-137,
https://doi.org/10.1016/j.culher.2016.07.001 . .

TY  - JOUR
AU  - Radojković, Bojana
AU  - Ristić, Slavica S.
AU  - Polić, Suzana R.
AU  - Jančić-Heinemann, Radmila
AU  - Radovanovic, Danijelka
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2878
AB  - The classic methods of cleaning oldfashioned textile museum objects with metallic threads often do not yield the expected results. The use of laser in the conservation of these objects plays an important role as very efficient and ecologically friendly technique. Conservation and restoration of historical exhibits with metal-textile combinations is becoming ever more complex due to a huge variety of damaging factors. The paper presents the results of the corrosion laser cleaning effects on ethnographic textile with metallic threads from the holdings of the Ethnographic Museum in Belgrade, using Nd:YAG laser. Testing of the cleaning effects was performed by optical and scanning electron microscopy. Chemical analysis of metal threads is made by EDX and XRD analysis. Parameters for successful and safe cleaning of corrosion products on metallic threads were determined.
T2  - Journal of Cultural Heritage
T1  - Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns
VL  - 23
SP  - 128
EP  - 137
DO  - 10.1016/j.culher.2016.07.001
ER  - 

@article{
author = "Radojković, Bojana and Ristić, Slavica S. and Polić, Suzana R. and Jančić-Heinemann, Radmila and Radovanovic, Danijelka",
year = "2017",
abstract = "The classic methods of cleaning oldfashioned textile museum objects with metallic threads often do not yield the expected results. The use of laser in the conservation of these objects plays an important role as very efficient and ecologically friendly technique. Conservation and restoration of historical exhibits with metal-textile combinations is becoming ever more complex due to a huge variety of damaging factors. The paper presents the results of the corrosion laser cleaning effects on ethnographic textile with metallic threads from the holdings of the Ethnographic Museum in Belgrade, using Nd:YAG laser. Testing of the cleaning effects was performed by optical and scanning electron microscopy. Chemical analysis of metal threads is made by EDX and XRD analysis. Parameters for successful and safe cleaning of corrosion products on metallic threads were determined.",
journal = "Journal of Cultural Heritage",
title = "Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns",
volume = "23",
pages = "128-137",
doi = "10.1016/j.culher.2016.07.001"
}

Radojković, B., Ristić, S. S., Polić, S. R., Jančić-Heinemann, R.,& Radovanovic, D.. (2017). Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns. in Journal of Cultural Heritage, 23, 128-137.
https://doi.org/10.1016/j.culher.2016.07.001

Radojković B, Ristić SS, Polić SR, Jančić-Heinemann R, Radovanovic D. Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns. in Journal of Cultural Heritage. 2017;23:128-137.
doi:10.1016/j.culher.2016.07.001 .

Radojković, Bojana, Ristić, Slavica S., Polić, Suzana R., Jančić-Heinemann, Radmila, Radovanovic, Danijelka, "Preliminary investigation on the use of the Q-switched Nd:YAG laser to clean corrosion products on museum embroidered textiles with metallic yarns" in Journal of Cultural Heritage, 23 (2017):128-137,
https://doi.org/10.1016/j.culher.2016.07.001 . .

TY  - JOUR
AU  - Radojković, Bojana M.
AU  - Ristić, Slavica
AU  - Polić, Suzana R.
AU  - Jančić-Heinemann, Radmila
PY  - 2017
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5483
AB  - The main aim of this paper is to present the results of the morphological and chemical changes on the surface of a ceramic sample irradiated by the Nd:YAG laser. The tested sample is a part of an aqueduct tile, originating from the archaeological site of Yazd, Iran. The laser irradiation effects were studied as a function of the number of laser pulses and laser fluences around and over the damage threshold. The obtained modifications were investigated because these are essential in laser cleaning of aqueduct ceramics. The Nd: YAG laser with a wavelength, lambda, of 1064 nm and full width at half maximum (FWHM) pulse, tau, of 150 ps has been used for the surface treatment. The ceramic surface morphology modifications, induced by laser, were characterized by a scanning electron microscope (SEM), while the composition was examined by energy-dispersive (EDX) and X-ray fluorescence (XRF) spectroscopy. The results show that there are significant differences depending on the applied laser fluences and whether the surface is glazed or not.
PB  - Philadelphia, PA, USA: Old City Publishing, Inc
T2  - Lasers in Engineering
T1  - Surface Modification of Aqueduct Ceramics Induced by Nd:Yag Pulsed Laser Treatment
VL  - 36
IS  - 4-6
SP  - 373
EP  - 390
UR  - https://hdl.handle.net/21.15107/rcub_cer_5483
ER  - 

@article{
author = "Radojković, Bojana M. and Ristić, Slavica and Polić, Suzana R. and Jančić-Heinemann, Radmila",
year = "2017",
abstract = "The main aim of this paper is to present the results of the morphological and chemical changes on the surface of a ceramic sample irradiated by the Nd:YAG laser. The tested sample is a part of an aqueduct tile, originating from the archaeological site of Yazd, Iran. The laser irradiation effects were studied as a function of the number of laser pulses and laser fluences around and over the damage threshold. The obtained modifications were investigated because these are essential in laser cleaning of aqueduct ceramics. The Nd: YAG laser with a wavelength, lambda, of 1064 nm and full width at half maximum (FWHM) pulse, tau, of 150 ps has been used for the surface treatment. The ceramic surface morphology modifications, induced by laser, were characterized by a scanning electron microscope (SEM), while the composition was examined by energy-dispersive (EDX) and X-ray fluorescence (XRF) spectroscopy. The results show that there are significant differences depending on the applied laser fluences and whether the surface is glazed or not.",
publisher = "Philadelphia, PA, USA: Old City Publishing, Inc",
journal = "Lasers in Engineering",
title = "Surface Modification of Aqueduct Ceramics Induced by Nd:Yag Pulsed Laser Treatment",
volume = "36",
number = "4-6",
pages = "373-390",
url = "https://hdl.handle.net/21.15107/rcub_cer_5483"
}

Radojković, B. M., Ristić, S., Polić, S. R.,& Jančić-Heinemann, R.. (2017). Surface Modification of Aqueduct Ceramics Induced by Nd:Yag Pulsed Laser Treatment. in Lasers in Engineering
Philadelphia, PA, USA: Old City Publishing, Inc., 36(4-6), 373-390.
https://hdl.handle.net/21.15107/rcub_cer_5483

Radojković BM, Ristić S, Polić SR, Jančić-Heinemann R. Surface Modification of Aqueduct Ceramics Induced by Nd:Yag Pulsed Laser Treatment. in Lasers in Engineering. 2017;36(4-6):373-390.
https://hdl.handle.net/21.15107/rcub_cer_5483 .

Radojković, Bojana M., Ristić, Slavica, Polić, Suzana R., Jančić-Heinemann, Radmila, "Surface Modification of Aqueduct Ceramics Induced by Nd:Yag Pulsed Laser Treatment" in Lasers in Engineering, 36, no. 4-6 (2017):373-390,
https://hdl.handle.net/21.15107/rcub_cer_5483 .

TY  - JOUR
AU  - Radojković, Bojana M.
AU  - Ristić, Slavica
AU  - Polić, Suzana R.
AU  - Radovanović, Danijelka
AU  - Jančić-Heinemann, Radmila
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5496
AB  - A great number of textile objects with metallic embroidery are kept in Ethnographic Museums all over the world. Corrosion is a process that occurs under the external chemical, mechanical and biological influences. The museum conservators invest significant efforts to provide the necessary conditions for preventive protection. The classic methods of cleaning old textile objects with metallic threads often do not yield the expected results and the use of laser in the conservation of these objects plays an important role.
Laser cleaning is an effective cleaning technique of metal corrosion layers since it provides a high degree of control. That allows fragile objects with a considerable amount of surface details. The most complicated implementation of laser is in cleaning the objects with multi-component composition such as, for example, metal and textile combination. Although there are certain published results, this domain has not been sufficiently researched because every object is a problem that requires study and comprehensive research before cleaning is attempted. 
This paper shows the results of research conducted with the aim of determining optimum parameters in the process of cleaning the product of corrosion on a woman's costume part, apron, from southern Serbia (study collection of the Ethnographic museum in Belgrade). Laser cleaning was made by using the Nd:Yag laser with three wavelengths 1064 and 532 nm, and energies between 2-200mJ. The obtained results were studied with a USB optical microscope, electron microscope SEM, with EDX analysis.
AB  - Етнографски музеји широм света, у својим депоима, чувају велики број текстилних предмета са металним везом. Корозија представља оштећење материјала које може да се јавља под спољним механичким, хемијским и биолошким утицајем. Конзерватори у музеју су уложили велике напоре да обезбеде неопходне услове превентивне заштите. Класичне методе чишћења старих текстилних предмета са металним нитима често пута не дају очекиване резултате и примена ласера у заштити и конзервацији предмета културне баштине последњих година има велику улогу.
Ласерско чишћење је веома ефикасна техника чишћења корозионих слојева обзиром да омогућава висок степен контроле параметара, што обезбеђује безбедно и ефикасно чишћење објеката који су осетљиви. Најкомпликованија је примена ласера у чишћењу експоната који имају вишекомпонентни састав, као што су, на пример, комбинација метала и текстила. Иако постоје одређени резултати који су публиковани, ова област је недовољно истражена, јер је сваки предмет проблем који тражи студиозно и свеобухватно истраживање пре него што се приступи чишћењу.
У овом раду је приказан део резултата истраживања спроведених с циљем да се одреде оптимални параметри у процесу чишћења корозионих продуката на делу женске одеће-сукња са југа Србије (из научне збирке Етнографског музеја у Београду). Ласерско чишћење је реализовано помоћу Nd:YAG ласера, са три таласне дужине: 1064  и 532 nm и енергијама између 2-200mJ. Добијени резултати су испитивани дигиталним, оптичким микроскопом, електронским микроскопом и EDX анализом.
PB  - Scientific professional society for environmental protection of Serbia-ECOLOGICA
T2  - ECOLOGICA
T1  - Ecological cleaning of corrosion products on mettalic embroidery textile artefacts by Nd:YAG laser
VL  - 22
IS  - 79
SP  - 555
EP  - 560
UR  - https://hdl.handle.net/21.15107/rcub_cer_5496
ER  - 

@article{
author = "Radojković, Bojana M. and Ristić, Slavica and Polić, Suzana R. and Radovanović, Danijelka and Jančić-Heinemann, Radmila",
year = "2015",
abstract = "A great number of textile objects with metallic embroidery are kept in Ethnographic Museums all over the world. Corrosion is a process that occurs under the external chemical, mechanical and biological influences. The museum conservators invest significant efforts to provide the necessary conditions for preventive protection. The classic methods of cleaning old textile objects with metallic threads often do not yield the expected results and the use of laser in the conservation of these objects plays an important role.
Laser cleaning is an effective cleaning technique of metal corrosion layers since it provides a high degree of control. That allows fragile objects with a considerable amount of surface details. The most complicated implementation of laser is in cleaning the objects with multi-component composition such as, for example, metal and textile combination. Although there are certain published results, this domain has not been sufficiently researched because every object is a problem that requires study and comprehensive research before cleaning is attempted. 
This paper shows the results of research conducted with the aim of determining optimum parameters in the process of cleaning the product of corrosion on a woman's costume part, apron, from southern Serbia (study collection of the Ethnographic museum in Belgrade). Laser cleaning was made by using the Nd:Yag laser with three wavelengths 1064 and 532 nm, and energies between 2-200mJ. The obtained results were studied with a USB optical microscope, electron microscope SEM, with EDX analysis., Етнографски музеји широм света, у својим депоима, чувају велики број текстилних предмета са металним везом. Корозија представља оштећење материјала које може да се јавља под спољним механичким, хемијским и биолошким утицајем. Конзерватори у музеју су уложили велике напоре да обезбеде неопходне услове превентивне заштите. Класичне методе чишћења старих текстилних предмета са металним нитима често пута не дају очекиване резултате и примена ласера у заштити и конзервацији предмета културне баштине последњих година има велику улогу.
Ласерско чишћење је веома ефикасна техника чишћења корозионих слојева обзиром да омогућава висок степен контроле параметара, што обезбеђује безбедно и ефикасно чишћење објеката који су осетљиви. Најкомпликованија је примена ласера у чишћењу експоната који имају вишекомпонентни састав, као што су, на пример, комбинација метала и текстила. Иако постоје одређени резултати који су публиковани, ова област је недовољно истражена, јер је сваки предмет проблем који тражи студиозно и свеобухватно истраживање пре него што се приступи чишћењу.
У овом раду је приказан део резултата истраживања спроведених с циљем да се одреде оптимални параметри у процесу чишћења корозионих продуката на делу женске одеће-сукња са југа Србије (из научне збирке Етнографског музеја у Београду). Ласерско чишћење је реализовано помоћу Nd:YAG ласера, са три таласне дужине: 1064  и 532 nm и енергијама између 2-200mJ. Добијени резултати су испитивани дигиталним, оптичким микроскопом, електронским микроскопом и EDX анализом.",
publisher = "Scientific professional society for environmental protection of Serbia-ECOLOGICA",
journal = "ECOLOGICA",
title = "Ecological cleaning of corrosion products on mettalic embroidery textile artefacts by Nd:YAG laser",
volume = "22",
number = "79",
pages = "555-560",
url = "https://hdl.handle.net/21.15107/rcub_cer_5496"
}

Radojković, B. M., Ristić, S., Polić, S. R., Radovanović, D.,& Jančić-Heinemann, R.. (2015). Ecological cleaning of corrosion products on mettalic embroidery textile artefacts by Nd:YAG laser. in ECOLOGICA
Scientific professional society for environmental protection of Serbia-ECOLOGICA., 22(79), 555-560.
https://hdl.handle.net/21.15107/rcub_cer_5496

Radojković BM, Ristić S, Polić SR, Radovanović D, Jančić-Heinemann R. Ecological cleaning of corrosion products on mettalic embroidery textile artefacts by Nd:YAG laser. in ECOLOGICA. 2015;22(79):555-560.
https://hdl.handle.net/21.15107/rcub_cer_5496 .

Radojković, Bojana M., Ristić, Slavica, Polić, Suzana R., Radovanović, Danijelka, Jančić-Heinemann, Radmila, "Ecological cleaning of corrosion products on mettalic embroidery textile artefacts by Nd:YAG laser" in ECOLOGICA, 22, no. 79 (2015):555-560,
https://hdl.handle.net/21.15107/rcub_cer_5496 .

TY  - JOUR
AU  - Perić, Tamara O.
AU  - Marković, Dejan
AU  - Radojević, Vesna
AU  - Jančić-Heinemann, Radmila
AU  - Petrovic, Bojan B
AU  - Lamovec, Jelena
PY  - 2014
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1469
AB  - Purpose: The purpose of the study was to evaluate the surface characteristics of demineralized enamel after treatment with pastes containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) or casein phosphopeptide-amorphous calcium fluoride phosphate (CPP-ACFP) and to compare their efficacy with that of 0.05% NaF. Methods: Following formation of the artificial carious lesion, enamel slabs were divided into 4 groups (CPP-ACP, CPP-ACFP, 0.05% NaF and control) and submitted to a chemical caries model. Remineralization potential was examined using scanning electron microscope, energy-dispersive spectroscopy (EDS) and microhardness test. Scanning electron microphotographs were analyzed for area, minimal, maximal and mean diameter, perimeter, roundness and number of enamel defects and percentage of tooth surface affected by defects. Results: Treatment with 0.05% NaF partly reduced the appearance of enamel defects when compared with irregular demineralized enamel. Treatment with CPP-ACP or CPP-ACFP resulted in occlusion of defects which produced more flattened enamel surface. Image analysis revealed reduction of the dimensions of the defects in the 3 experimental groups. Treatment with CPP-ACFP decreased the number of enamel defects when compared with demineralized enamel. The EDS analysis did not show differences in Ca/O, P/O and Ca/P ratios between the groups (P>0.05). Microhardness test revealed significant effects of CPP-ACP and CPP-ACFP (P LT 0.05). Conclusions: Pastes containing CPP-ACP or CPP-ACFP showed potential to remineralize enamel surface lesions.
PB  - Wichtig Editore, Milan
T2  - Journal of Applied Biomaterials & Functional Materials
T1  - Influence of pastes containing casein phosphopeptide-amorphous calcium phosphate on surface of demineralized enamel
VL  - 12
IS  - 3
SP  - 234
EP  - 239
DO  - 10.5301/jabfm.5000194
ER  - 

@article{
author = "Perić, Tamara O. and Marković, Dejan and Radojević, Vesna and Jančić-Heinemann, Radmila and Petrovic, Bojan B and Lamovec, Jelena",
year = "2014",
abstract = "Purpose: The purpose of the study was to evaluate the surface characteristics of demineralized enamel after treatment with pastes containing casein phosphopeptide-amorphous calcium phosphate (CPP-ACP) or casein phosphopeptide-amorphous calcium fluoride phosphate (CPP-ACFP) and to compare their efficacy with that of 0.05% NaF. Methods: Following formation of the artificial carious lesion, enamel slabs were divided into 4 groups (CPP-ACP, CPP-ACFP, 0.05% NaF and control) and submitted to a chemical caries model. Remineralization potential was examined using scanning electron microscope, energy-dispersive spectroscopy (EDS) and microhardness test. Scanning electron microphotographs were analyzed for area, minimal, maximal and mean diameter, perimeter, roundness and number of enamel defects and percentage of tooth surface affected by defects. Results: Treatment with 0.05% NaF partly reduced the appearance of enamel defects when compared with irregular demineralized enamel. Treatment with CPP-ACP or CPP-ACFP resulted in occlusion of defects which produced more flattened enamel surface. Image analysis revealed reduction of the dimensions of the defects in the 3 experimental groups. Treatment with CPP-ACFP decreased the number of enamel defects when compared with demineralized enamel. The EDS analysis did not show differences in Ca/O, P/O and Ca/P ratios between the groups (P>0.05). Microhardness test revealed significant effects of CPP-ACP and CPP-ACFP (P LT 0.05). Conclusions: Pastes containing CPP-ACP or CPP-ACFP showed potential to remineralize enamel surface lesions.",
publisher = "Wichtig Editore, Milan",
journal = "Journal of Applied Biomaterials & Functional Materials",
title = "Influence of pastes containing casein phosphopeptide-amorphous calcium phosphate on surface of demineralized enamel",
volume = "12",
number = "3",
pages = "234-239",
doi = "10.5301/jabfm.5000194"
}

Perić, T. O., Marković, D., Radojević, V., Jančić-Heinemann, R., Petrovic, B. B.,& Lamovec, J.. (2014). Influence of pastes containing casein phosphopeptide-amorphous calcium phosphate on surface of demineralized enamel. in Journal of Applied Biomaterials & Functional Materials
Wichtig Editore, Milan., 12(3), 234-239.
https://doi.org/10.5301/jabfm.5000194

Perić TO, Marković D, Radojević V, Jančić-Heinemann R, Petrovic BB, Lamovec J. Influence of pastes containing casein phosphopeptide-amorphous calcium phosphate on surface of demineralized enamel. in Journal of Applied Biomaterials & Functional Materials. 2014;12(3):234-239.
doi:10.5301/jabfm.5000194 .

Perić, Tamara O., Marković, Dejan, Radojević, Vesna, Jančić-Heinemann, Radmila, Petrovic, Bojan B, Lamovec, Jelena, "Influence of pastes containing casein phosphopeptide-amorphous calcium phosphate on surface of demineralized enamel" in Journal of Applied Biomaterials & Functional Materials, 12, no. 3 (2014):234-239,
https://doi.org/10.5301/jabfm.5000194 . .

TY  - JOUR
AU  - Ristić, Slavica
AU  - Polić, Suzana R.
AU  - Radojković, Bojana M.
AU  - Zrilić, Milorad
AU  - Jančić-Heinemann, Radmila
PY  - 2014
UR  - https://scindeks.ceon.rs/article.aspx?artid=1820-02061404045R
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5495
AB  - This paper presents the results of the laser cleaning effects on textile samples with corroded metallic threads. In many museum collections, there are textile exhibits like uniforms, national costumes, flags and home textile, embroidered with metallic threads. Corrosion of metal threads is one of the most common problems that damage embroidered items. In the practice, the application of conventional cleaning methods rarely gives the expected results, and the implementation of laser technology was the next step for corrosion products cleaning. The Nd:YAG laser was used to clean the corrosion of embroidered items from a museum study collection. The effects on the laser irradiated zones were investigated by optical and SEM microscopy and the EDX analysis. The laser irradiation process parameters of the metal threads corrosion
AB  - U radu su prikazani rezultati čišćenja korozije na tekstilnim eksponatima sa metalnim nitima pomoću lasera. U mnogim muzejskim zbirkama nalaze se eksponati kao što su uniforme, narodne nošnje, zastave i kućni tekstil, ukrašeni vezom metalnim nitima. Korozija metalnih niti je jedan od najvećih problema, koji oštećuje vezene eksponate. U praksi, veoma često, klasične metode ne daju očekivane rezultate i primena lasera je sledeći korak čišćenja korozionih produkata. Nd- YAG laser je korišćen za čišćenje korozije vezenih eksponata iz muzejske, studijske zbirke. Efekti u zonama ozračenim laserom su ispitivani optičkim mikroskopom, SEMom i EDX analizom. Određeni su izabrani parametri za uspešno i bezbedno čišćenje korozije na metalnim nitima.
AB  - В этой статье приведены результаты очистки коррозии на экспонатах из текстиля с металлическими нитями с помощью лазера. Во многих музейных коллекциях представлены экспонаты, такие как формы, народные костюмы, флаги и домашний текстиль, вышитые металлической нитью. Коррозия металлических нитей является одной из самых больших проблем, которая повреждает вышитые экспонаты. На практике, очень часто, классические методы не дают ожидаемых результатов и применение лазера является следующим шагом
очистки следов коррозии. Nd-YAG лазер используется для очистки коррозии вышитых экспонатов из музейных исследовательских коллекций. Эффекты в областях облученных лазером были исследованы с помощью оптического микроскопа, SEM и EDX анализом. Некоторые параметры определяются и выбираются так, чтобы успешно и безопасно очистить металлические нити от коррозии.
AB  - Dans ce papier on a présenté les résultats du nettoyage de corrosion chez les objets exposés en textile aux fils métalliques réalisé au moyen du laser. Dans plusieurs collections de musée on trouve les objets tels que uniformes, costumes nationaux, drapeaux et textile de maison qui sont ornés de broderie faite en fils de métal. La corrosion des fils en métal est un des plus grands problèmes car elle endommage les objets exposés brodés. En pratique les méthodes classiques ne donnent pas souvent les résultats espérés et l’utilisation du laser est le pas suivant dans le nettoyage des produits de 
corrosion. Le laser Nd-YAG a été utilisé pour le nettoyage de corrosion sur les objets brodés appartenant à la collection d’étude de musée. Dans les zones irradiées par laser les effets ont été étudiés au moyen du microscope optique et en utilisant les analyses SEM et EDX. On a déterminé les paramètres choisis pour le nettoyage en sécurité et avec succès de la corrosion chez les fils en métal.
PB  - Belgrade, Serbia: Military Technical Institute, Belgrade
T2  - Scientific Technical Review
T1  - Laser Cleaning of Textile Artifacts with Metal Threads: Process Parameter Optimization
T1  - Lasersko čišćenje tekstilnih eksponata sa korodiranim metalnim nitima - optimzacije parametara procesa
VL  - 64
IS  - 4
SP  - 45
EP  - 52
UR  - https://hdl.handle.net/21.15107/rcub_cer_5495
ER  - 

@article{
author = "Ristić, Slavica and Polić, Suzana R. and Radojković, Bojana M. and Zrilić, Milorad and Jančić-Heinemann, Radmila",
year = "2014",
abstract = "This paper presents the results of the laser cleaning effects on textile samples with corroded metallic threads. In many museum collections, there are textile exhibits like uniforms, national costumes, flags and home textile, embroidered with metallic threads. Corrosion of metal threads is one of the most common problems that damage embroidered items. In the practice, the application of conventional cleaning methods rarely gives the expected results, and the implementation of laser technology was the next step for corrosion products cleaning. The Nd:YAG laser was used to clean the corrosion of embroidered items from a museum study collection. The effects on the laser irradiated zones were investigated by optical and SEM microscopy and the EDX analysis. The laser irradiation process parameters of the metal threads corrosion, U radu su prikazani rezultati čišćenja korozije na tekstilnim eksponatima sa metalnim nitima pomoću lasera. U mnogim muzejskim zbirkama nalaze se eksponati kao što su uniforme, narodne nošnje, zastave i kućni tekstil, ukrašeni vezom metalnim nitima. Korozija metalnih niti je jedan od najvećih problema, koji oštećuje vezene eksponate. U praksi, veoma često, klasične metode ne daju očekivane rezultate i primena lasera je sledeći korak čišćenja korozionih produkata. Nd- YAG laser je korišćen za čišćenje korozije vezenih eksponata iz muzejske, studijske zbirke. Efekti u zonama ozračenim laserom su ispitivani optičkim mikroskopom, SEMom i EDX analizom. Određeni su izabrani parametri za uspešno i bezbedno čišćenje korozije na metalnim nitima., В этой статье приведены результаты очистки коррозии на экспонатах из текстиля с металлическими нитями с помощью лазера. Во многих музейных коллекциях представлены экспонаты, такие как формы, народные костюмы, флаги и домашний текстиль, вышитые металлической нитью. Коррозия металлических нитей является одной из самых больших проблем, которая повреждает вышитые экспонаты. На практике, очень часто, классические методы не дают ожидаемых результатов и применение лазера является следующим шагом
очистки следов коррозии. Nd-YAG лазер используется для очистки коррозии вышитых экспонатов из музейных исследовательских коллекций. Эффекты в областях облученных лазером были исследованы с помощью оптического микроскопа, SEM и EDX анализом. Некоторые параметры определяются и выбираются так, чтобы успешно и безопасно очистить металлические нити от коррозии., Dans ce papier on a présenté les résultats du nettoyage de corrosion chez les objets exposés en textile aux fils métalliques réalisé au moyen du laser. Dans plusieurs collections de musée on trouve les objets tels que uniformes, costumes nationaux, drapeaux et textile de maison qui sont ornés de broderie faite en fils de métal. La corrosion des fils en métal est un des plus grands problèmes car elle endommage les objets exposés brodés. En pratique les méthodes classiques ne donnent pas souvent les résultats espérés et l’utilisation du laser est le pas suivant dans le nettoyage des produits de 
corrosion. Le laser Nd-YAG a été utilisé pour le nettoyage de corrosion sur les objets brodés appartenant à la collection d’étude de musée. Dans les zones irradiées par laser les effets ont été étudiés au moyen du microscope optique et en utilisant les analyses SEM et EDX. On a déterminé les paramètres choisis pour le nettoyage en sécurité et avec succès de la corrosion chez les fils en métal.",
publisher = "Belgrade, Serbia: Military Technical Institute, Belgrade",
journal = "Scientific Technical Review",
title = "Laser Cleaning of Textile Artifacts with Metal Threads: Process Parameter Optimization, Lasersko čišćenje tekstilnih eksponata sa korodiranim metalnim nitima - optimzacije parametara procesa",
volume = "64",
number = "4",
pages = "45-52",
url = "https://hdl.handle.net/21.15107/rcub_cer_5495"
}

Ristić, S., Polić, S. R., Radojković, B. M., Zrilić, M.,& Jančić-Heinemann, R.. (2014). Laser Cleaning of Textile Artifacts with Metal Threads: Process Parameter Optimization. in Scientific Technical Review
Belgrade, Serbia: Military Technical Institute, Belgrade., 64(4), 45-52.
https://hdl.handle.net/21.15107/rcub_cer_5495

Ristić S, Polić SR, Radojković BM, Zrilić M, Jančić-Heinemann R. Laser Cleaning of Textile Artifacts with Metal Threads: Process Parameter Optimization. in Scientific Technical Review. 2014;64(4):45-52.
https://hdl.handle.net/21.15107/rcub_cer_5495 .

Ristić, Slavica, Polić, Suzana R., Radojković, Bojana M., Zrilić, Milorad, Jančić-Heinemann, Radmila, "Laser Cleaning of Textile Artifacts with Metal Threads: Process Parameter Optimization" in Scientific Technical Review, 64, no. 4 (2014):45-52,
https://hdl.handle.net/21.15107/rcub_cer_5495 .

TY  - CONF
AU  - Svoboda, Vesna
AU  - Jančić-Heinemann, Radmila
AU  - Milovanović, Dragan
AU  - Radulac, Mišel
AU  - Obradović, Slobodan
AU  - Polić-Radovanović, Suzana R.
AU  - Popović-Živančević, Mila
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6223
AB  - Plocnik near Prokuplje is the location of the excavations of the interesting Neolithic settling having very developed pottery production for a period of about 800 years. Pottery artifacts are carrying information about the technological skills of Neolithic people and are giving the insight about their ability to control fire and firing process. This ability is performed in producing different color of their vessel and having bowls having very fine structure. In order to reconstruct the pottery production technique in the scope of the experimental archaeology two approaches were used. The classical geology approach was used to identify the origin of the clay used in the production. Petrography gives insight into the structural characteristics of the pottery. In order to reveal the technique of production of bowls and other utility pottery objects the multi slice scanner was used. The pottery has the density that is comparable to that one of the bones and the imaging techniques used for bone structure identification are used in this study.
PB  - Belgrade: Institute for Multidisciplinary research, University of Belgrade
C3  - Program and the Book of Abstracts - 2nd Conference of the Serbian Ceramic Society 2CSCS-2013, June 5-7, 2013, Belgrade, Serbia
T1  - Reconstruction of production process of neolithic pottery from Pločnik near Prokuplje
VL  - 2
SP  - 99
EP  - 99
UR  - https://hdl.handle.net/21.15107/rcub_cer_6223
ER  - 

@conference{
author = "Svoboda, Vesna and Jančić-Heinemann, Radmila and Milovanović, Dragan and Radulac, Mišel and Obradović, Slobodan and Polić-Radovanović, Suzana R. and Popović-Živančević, Mila",
year = "2013",
abstract = "Plocnik near Prokuplje is the location of the excavations of the interesting Neolithic settling having very developed pottery production for a period of about 800 years. Pottery artifacts are carrying information about the technological skills of Neolithic people and are giving the insight about their ability to control fire and firing process. This ability is performed in producing different color of their vessel and having bowls having very fine structure. In order to reconstruct the pottery production technique in the scope of the experimental archaeology two approaches were used. The classical geology approach was used to identify the origin of the clay used in the production. Petrography gives insight into the structural characteristics of the pottery. In order to reveal the technique of production of bowls and other utility pottery objects the multi slice scanner was used. The pottery has the density that is comparable to that one of the bones and the imaging techniques used for bone structure identification are used in this study.",
publisher = "Belgrade: Institute for Multidisciplinary research, University of Belgrade",
journal = "Program and the Book of Abstracts - 2nd Conference of the Serbian Ceramic Society 2CSCS-2013, June 5-7, 2013, Belgrade, Serbia",
title = "Reconstruction of production process of neolithic pottery from Pločnik near Prokuplje",
volume = "2",
pages = "99-99",
url = "https://hdl.handle.net/21.15107/rcub_cer_6223"
}

Svoboda, V., Jančić-Heinemann, R., Milovanović, D., Radulac, M., Obradović, S., Polić-Radovanović, S. R.,& Popović-Živančević, M.. (2013). Reconstruction of production process of neolithic pottery from Pločnik near Prokuplje. in Program and the Book of Abstracts - 2nd Conference of the Serbian Ceramic Society 2CSCS-2013, June 5-7, 2013, Belgrade, Serbia
Belgrade: Institute for Multidisciplinary research, University of Belgrade., 2, 99-99.
https://hdl.handle.net/21.15107/rcub_cer_6223

Svoboda V, Jančić-Heinemann R, Milovanović D, Radulac M, Obradović S, Polić-Radovanović SR, Popović-Živančević M. Reconstruction of production process of neolithic pottery from Pločnik near Prokuplje. in Program and the Book of Abstracts - 2nd Conference of the Serbian Ceramic Society 2CSCS-2013, June 5-7, 2013, Belgrade, Serbia. 2013;2:99-99.
https://hdl.handle.net/21.15107/rcub_cer_6223 .

Svoboda, Vesna, Jančić-Heinemann, Radmila, Milovanović, Dragan, Radulac, Mišel, Obradović, Slobodan, Polić-Radovanović, Suzana R., Popović-Živančević, Mila, "Reconstruction of production process of neolithic pottery from Pločnik near Prokuplje" in Program and the Book of Abstracts - 2nd Conference of the Serbian Ceramic Society 2CSCS-2013, June 5-7, 2013, Belgrade, Serbia, 2 (2013):99-99,
https://hdl.handle.net/21.15107/rcub_cer_6223 .

TY  - CONF
AU  - Gajić-Kvaščev, Maja
AU  - Svoboda, Vesna
AU  - Jančić-Heinemann, Radmila
AU  - Dimitrijević, Marija
AU  - Milovanović, Dragan
AU  - Polić-Radovanović, Suzana R.
PY  - 2012
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6224
AB  - In this study the eight bowls having different shap es, sizes and grades from the Vinča II period were chosen for the examination of ceramic body morphology. The morphology of ceramic pads, prepared in the laboratory using clays that were sampled nearby the excavation site, were also considered. The optical microscopy images of the pottery ceramic body and test pads were analyzed using the ImagePro plus 4 software package. Multivariate statistical analysis was employed to classify pottery sherds and clays according to their morphology. The obtained results show that morphological characteristics of the minerals can be considered as viable in recognition of the clay source.
PB  - Torino: Marco Valerio Editore
C3  - The Book of the Abstracts - Mediterraneum Meeting Use of Multivariate Analysis and Chemometrics in Cultural Heritage and Environment 4th ed. CMA4CH 2012, 27-30 May 2012Rome, Italy
T1  - Classification of Neolithic Ceramics and Clays According to Their Morphological Characteristics
VL  - 4
UR  - https://hdl.handle.net/21.15107/rcub_cer_6224
ER  - 

@conference{
author = "Gajić-Kvaščev, Maja and Svoboda, Vesna and Jančić-Heinemann, Radmila and Dimitrijević, Marija and Milovanović, Dragan and Polić-Radovanović, Suzana R.",
year = "2012",
abstract = "In this study the eight bowls having different shap es, sizes and grades from the Vinča II period were chosen for the examination of ceramic body morphology. The morphology of ceramic pads, prepared in the laboratory using clays that were sampled nearby the excavation site, were also considered. The optical microscopy images of the pottery ceramic body and test pads were analyzed using the ImagePro plus 4 software package. Multivariate statistical analysis was employed to classify pottery sherds and clays according to their morphology. The obtained results show that morphological characteristics of the minerals can be considered as viable in recognition of the clay source.",
publisher = "Torino: Marco Valerio Editore",
journal = "The Book of the Abstracts - Mediterraneum Meeting Use of Multivariate Analysis and Chemometrics in Cultural Heritage and Environment 4th ed. CMA4CH 2012, 27-30 May 2012Rome, Italy",
title = "Classification of Neolithic Ceramics and Clays According to Their Morphological Characteristics",
volume = "4",
url = "https://hdl.handle.net/21.15107/rcub_cer_6224"
}

Gajić-Kvaščev, M., Svoboda, V., Jančić-Heinemann, R., Dimitrijević, M., Milovanović, D.,& Polić-Radovanović, S. R.. (2012). Classification of Neolithic Ceramics and Clays According to Their Morphological Characteristics. in The Book of the Abstracts - Mediterraneum Meeting Use of Multivariate Analysis and Chemometrics in Cultural Heritage and Environment 4th ed. CMA4CH 2012, 27-30 May 2012Rome, Italy
Torino: Marco Valerio Editore., 4.
https://hdl.handle.net/21.15107/rcub_cer_6224

Gajić-Kvaščev M, Svoboda V, Jančić-Heinemann R, Dimitrijević M, Milovanović D, Polić-Radovanović SR. Classification of Neolithic Ceramics and Clays According to Their Morphological Characteristics. in The Book of the Abstracts - Mediterraneum Meeting Use of Multivariate Analysis and Chemometrics in Cultural Heritage and Environment 4th ed. CMA4CH 2012, 27-30 May 2012Rome, Italy. 2012;4.
https://hdl.handle.net/21.15107/rcub_cer_6224 .

Gajić-Kvaščev, Maja, Svoboda, Vesna, Jančić-Heinemann, Radmila, Dimitrijević, Marija, Milovanović, Dragan, Polić-Radovanović, Suzana R., "Classification of Neolithic Ceramics and Clays According to Their Morphological Characteristics" in The Book of the Abstracts - Mediterraneum Meeting Use of Multivariate Analysis and Chemometrics in Cultural Heritage and Environment 4th ed. CMA4CH 2012, 27-30 May 2012Rome, Italy, 4 (2012),
https://hdl.handle.net/21.15107/rcub_cer_6224 .

TY  - JOUR
AU  - Stajić-Trošić, Jasna
AU  - Pešić, Olivera
AU  - Jordović, Branka
AU  - Maričić, Aleksandar
AU  - Jančić-Heinemann, Radmila
AU  - Ćosović, Vladan
AU  - Grujić, Aleksandar
AU  - Stevanović, Jasmina
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/888
AB  - Magnetic thin films based on iron group elements (Fe, Co, Ni) are currently used in computer's hard disk drives and in MEMS, whereas electrodeposition is a suitable method to obtain these materials. The powders of metals and alloys were obtained by electrochemical deposition at constant current density using alkaline ammonium electrolyte which consist one, two or three different elements Co, Ni and Mo. Ni and Co are deposited anomalously. The Mo element cannot be obtained electrochemically from the aqueous solutions. Electrochemical deposition of this metal is induced by codeposited iron-group metals, Ni and Co, for instance. This study investigates the influence of electrochemical parameters on composition and properties of obtained powders. Based on the obtained experimental results, it could be concluded that the particle size of deposited powders and chemical composition are influenced by the chemical composition of the electrolyte, with changing the concentration ratio of ions of metallic salts as well as current density imposed. As a consequence, the changes in magnetic properties are obvious. The structure and morphology of powders were investigated by Scanning Electron Microscopy (SEM). For demonstration of mechanism of powder deposition Image ProPlus software for SEM microphotograph analysis was used. The values of individual objects as well as formed clusters of powders were measured by this technique. The chemical composition of the powders was determinate using Energy Dispersive X-ray (EDX) analysis. XRD results suggested that obtained powders were of amorphous structure.
T2  - Metalurgija
T1  - Structural properties of Co, Ni and Mo powders obtained by electrochemical deposition
VL  - 17
IS  - 2
SP  - 95
EP  - 102
UR  - https://hdl.handle.net/21.15107/rcub_cer_888
ER  - 

@article{
author = "Stajić-Trošić, Jasna and Pešić, Olivera and Jordović, Branka and Maričić, Aleksandar and Jančić-Heinemann, Radmila and Ćosović, Vladan and Grujić, Aleksandar and Stevanović, Jasmina",
year = "2011",
abstract = "Magnetic thin films based on iron group elements (Fe, Co, Ni) are currently used in computer's hard disk drives and in MEMS, whereas electrodeposition is a suitable method to obtain these materials. The powders of metals and alloys were obtained by electrochemical deposition at constant current density using alkaline ammonium electrolyte which consist one, two or three different elements Co, Ni and Mo. Ni and Co are deposited anomalously. The Mo element cannot be obtained electrochemically from the aqueous solutions. Electrochemical deposition of this metal is induced by codeposited iron-group metals, Ni and Co, for instance. This study investigates the influence of electrochemical parameters on composition and properties of obtained powders. Based on the obtained experimental results, it could be concluded that the particle size of deposited powders and chemical composition are influenced by the chemical composition of the electrolyte, with changing the concentration ratio of ions of metallic salts as well as current density imposed. As a consequence, the changes in magnetic properties are obvious. The structure and morphology of powders were investigated by Scanning Electron Microscopy (SEM). For demonstration of mechanism of powder deposition Image ProPlus software for SEM microphotograph analysis was used. The values of individual objects as well as formed clusters of powders were measured by this technique. The chemical composition of the powders was determinate using Energy Dispersive X-ray (EDX) analysis. XRD results suggested that obtained powders were of amorphous structure.",
journal = "Metalurgija",
title = "Structural properties of Co, Ni and Mo powders obtained by electrochemical deposition",
volume = "17",
number = "2",
pages = "95-102",
url = "https://hdl.handle.net/21.15107/rcub_cer_888"
}

Stajić-Trošić, J., Pešić, O., Jordović, B., Maričić, A., Jančić-Heinemann, R., Ćosović, V., Grujić, A.,& Stevanović, J.. (2011). Structural properties of Co, Ni and Mo powders obtained by electrochemical deposition. in Metalurgija, 17(2), 95-102.
https://hdl.handle.net/21.15107/rcub_cer_888

Stajić-Trošić J, Pešić O, Jordović B, Maričić A, Jančić-Heinemann R, Ćosović V, Grujić A, Stevanović J. Structural properties of Co, Ni and Mo powders obtained by electrochemical deposition. in Metalurgija. 2011;17(2):95-102.
https://hdl.handle.net/21.15107/rcub_cer_888 .

Stajić-Trošić, Jasna, Pešić, Olivera, Jordović, Branka, Maričić, Aleksandar, Jančić-Heinemann, Radmila, Ćosović, Vladan, Grujić, Aleksandar, Stevanović, Jasmina, "Structural properties of Co, Ni and Mo powders obtained by electrochemical deposition" in Metalurgija, 17, no. 2 (2011):95-102,
https://hdl.handle.net/21.15107/rcub_cer_888 .

TY  - CONF
AU  - Svoboda, Vesna
AU  - Jančić-Heinemann, Radmila
AU  - Polić-Radovanović, Suzana R.
PY  - 2011
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6387
AB  - Pottery is the most durable artifact in archeology that could be used to determine the technological level, as well as helpful identification of ancient people's life. Existence of the technological method of ancient man that evolved in response to their environment is the subject of research in experimental archeology and evidence of existence of the intangible cultural heritage. Studying the neolith technology and possible interaction with later cultures includes multidisciplinary study. Initial research is aimed to classification, structure and artifacts studies that could lead to assumptions aboutthe preparation technique of pottery from archaeological site of Pločnik.
PB  - Belgrade: The Serbian Ceramic Society
PB  - Belgrade: Vinča Institute of Nuclear Sciences, University of Belgrade
PB  - Belgrade: Institute for Multidisciplinary research, University of Belgrade
PB  - Zemun: Institute of Physics, University of Belgrade
C3  - Program and the Book of Abstracts - 1st Conference of the Serbian Ceramic Society – 1CSCS 2011, March 17.-18. 2011., Belgrade, Serbia
T1  - The role of experimental research on ceramics in the identification of intangible cultural heritage
VL  - I
SP  - 64
UR  - https://hdl.handle.net/21.15107/rcub_cer_6387
ER  - 

@conference{
author = "Svoboda, Vesna and Jančić-Heinemann, Radmila and Polić-Radovanović, Suzana R.",
year = "2011",
abstract = "Pottery is the most durable artifact in archeology that could be used to determine the technological level, as well as helpful identification of ancient people's life. Existence of the technological method of ancient man that evolved in response to their environment is the subject of research in experimental archeology and evidence of existence of the intangible cultural heritage. Studying the neolith technology and possible interaction with later cultures includes multidisciplinary study. Initial research is aimed to classification, structure and artifacts studies that could lead to assumptions aboutthe preparation technique of pottery from archaeological site of Pločnik.",
publisher = "Belgrade: The Serbian Ceramic Society, Belgrade: Vinča Institute of Nuclear Sciences, University of Belgrade, Belgrade: Institute for Multidisciplinary research, University of Belgrade, Zemun: Institute of Physics, University of Belgrade",
journal = "Program and the Book of Abstracts - 1st Conference of the Serbian Ceramic Society – 1CSCS 2011, March 17.-18. 2011., Belgrade, Serbia",
title = "The role of experimental research on ceramics in the identification of intangible cultural heritage",
volume = "I",
pages = "64",
url = "https://hdl.handle.net/21.15107/rcub_cer_6387"
}

Svoboda, V., Jančić-Heinemann, R.,& Polić-Radovanović, S. R.. (2011). The role of experimental research on ceramics in the identification of intangible cultural heritage. in Program and the Book of Abstracts - 1st Conference of the Serbian Ceramic Society – 1CSCS 2011, March 17.-18. 2011., Belgrade, Serbia
Belgrade: The Serbian Ceramic Society., I, 64.
https://hdl.handle.net/21.15107/rcub_cer_6387

Svoboda V, Jančić-Heinemann R, Polić-Radovanović SR. The role of experimental research on ceramics in the identification of intangible cultural heritage. in Program and the Book of Abstracts - 1st Conference of the Serbian Ceramic Society – 1CSCS 2011, March 17.-18. 2011., Belgrade, Serbia. 2011;I:64.
https://hdl.handle.net/21.15107/rcub_cer_6387 .

Svoboda, Vesna, Jančić-Heinemann, Radmila, Polić-Radovanović, Suzana R., "The role of experimental research on ceramics in the identification of intangible cultural heritage" in Program and the Book of Abstracts - 1st Conference of the Serbian Ceramic Society – 1CSCS 2011, March 17.-18. 2011., Belgrade, Serbia, I (2011):64,
https://hdl.handle.net/21.15107/rcub_cer_6387 .