TY  - JOUR
AU  - Jaćimovski, Darko
AU  - Šućurović, Katarina
AU  - Đuriš, Mihal
AU  - Arsenijević, Zorana
AU  - Krstić, Sanja
AU  - Bošković-Vragolović, Nevenka
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/7410
AB  - In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and non-spherical particles of polypropylene and polyethylene with a diameter of 3.3-4.9 mm and a density of about 930 kg m-3. A diluted solution of methylene blue was used as a fluidization medium, which was adsorbed on part of the surface of the column on silica gel. The obtained results showed that the presence of particles during inverse fluidization does not contribute significantly to mass transfer compared to the influence of particles on transfer in conventional fluidized beds. Therefore, the pseudofluid concept was introduced into the analysis and an empirical correlation was performed to determine the mass transfer coefficient. The obtained results were compared with literature correlations for inverse and conventional fluidized beds.
AB  - У овом раду је одређиван коефицијент преноса масе флуид-зид у инверзнофлуидизованом слоју применом адсорпционе методе. Експерименти су вршени у колони  пречника 45 мм са сферичним и несферичним честицама полипропилена и полиетилена  пречника 3.3-4.9 мм и густине око 930 кг м-3. Као флуидизациони медијум коришћен је  разблажени раствор метиленски плавог који је адсорбован на делу површине колоне на  силикагелу. Добијени резултати показали су да присуство честица при инверзној  флуидизацији не доприноси значајно преносу масе у поређењу са утицајем честица на  пренос масе у конвенционално флуидизованим слојевима. Због тога је у анализу уведен  концепт псеудофлуида и изведена је емпиријска корелација за одређивање коефицијента  преноса масе. Извршено је поређење добијених резултата са литературним корелацијама за  инверзну и конвенционалну флуидизације.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Mass transfer in inverse fluidized beds
T1  - Пренос масе у инверзно флуидизованом слоју
VL  - 88
IS  - 9
SP  - 905
EP  - 919
DO  - 10.2298/JSC230116016J
ER  - 

@article{
author = "Jaćimovski, Darko and Šućurović, Katarina and Đuriš, Mihal and Arsenijević, Zorana and Krstić, Sanja and Bošković-Vragolović, Nevenka",
year = "2023",
abstract = "In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and non-spherical particles of polypropylene and polyethylene with a diameter of 3.3-4.9 mm and a density of about 930 kg m-3. A diluted solution of methylene blue was used as a fluidization medium, which was adsorbed on part of the surface of the column on silica gel. The obtained results showed that the presence of particles during inverse fluidization does not contribute significantly to mass transfer compared to the influence of particles on transfer in conventional fluidized beds. Therefore, the pseudofluid concept was introduced into the analysis and an empirical correlation was performed to determine the mass transfer coefficient. The obtained results were compared with literature correlations for inverse and conventional fluidized beds., У овом раду је одређиван коефицијент преноса масе флуид-зид у инверзнофлуидизованом слоју применом адсорпционе методе. Експерименти су вршени у колони  пречника 45 мм са сферичним и несферичним честицама полипропилена и полиетилена  пречника 3.3-4.9 мм и густине око 930 кг м-3. Као флуидизациони медијум коришћен је  разблажени раствор метиленски плавог који је адсорбован на делу површине колоне на  силикагелу. Добијени резултати показали су да присуство честица при инверзној  флуидизацији не доприноси значајно преносу масе у поређењу са утицајем честица на  пренос масе у конвенционално флуидизованим слојевима. Због тога је у анализу уведен  концепт псеудофлуида и изведена је емпиријска корелација за одређивање коефицијента  преноса масе. Извршено је поређење добијених резултата са литературним корелацијама за  инверзну и конвенционалну флуидизације.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Mass transfer in inverse fluidized beds, Пренос масе у инверзно флуидизованом слоју",
volume = "88",
number = "9",
pages = "905-919",
doi = "10.2298/JSC230116016J"
}

Jaćimovski, D., Šućurović, K., Đuriš, M., Arsenijević, Z., Krstić, S.,& Bošković-Vragolović, N.. (2023). Mass transfer in inverse fluidized beds. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 88(9), 905-919.
https://doi.org/10.2298/JSC230116016J

Jaćimovski D, Šućurović K, Đuriš M, Arsenijević Z, Krstić S, Bošković-Vragolović N. Mass transfer in inverse fluidized beds. in Journal of the Serbian Chemical Society. 2023;88(9):905-919.
doi:10.2298/JSC230116016J .

Jaćimovski, Darko, Šućurović, Katarina, Đuriš, Mihal, Arsenijević, Zorana, Krstić, Sanja, Bošković-Vragolović, Nevenka, "Mass transfer in inverse fluidized beds" in Journal of the Serbian Chemical Society, 88, no. 9 (2023):905-919,
https://doi.org/10.2298/JSC230116016J . .

TY  - CONF
AU  - Krstić, Sanja
AU  - Dodevski, Vladimir
AU  - Čebela, Maria
AU  - Rosić, Milena
AU  - Egerić, Marija
AU  - Vujasin, Radojka
AU  - Jaćimovski, Darko
PY  - 2023
UR  - https://vinar.vin.bg.ac.rs/handle/123456789/11485
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6622
AB  - The main aim of this research is to show influence of different hydroxides, applied in carbon materials activation process on the electrochemical properties of activated carbon samples. The carbon material samples were prepared by hydrothermal treatment of sucrose and thermally activated using KOH, NaOH and LiOH by chemical activation method. The electrochemical properties of the obtained carbon material samples were examined by cyclic voltammetry and electrochemical impedance spectroscopy and correlated to their physicochemical properties. Investigated samples showed characteristic capacitor-like behavior. The best result of specific capacitance was obtained for the sample synthesized treated by KOH, while the increase in capacitance follows the arrangement of the growth of ionic radius of a metal from an alkali which is used for activation. Dependence on the type of hydroxide is due to differences in the radii of a metal. The alkalis with larger radii of metal produce wider pores and consequently the structure of a porous layer become more accessible and available to the charge transfer of capacitive response.
PB  - Belgrade : University of Belgrade, Institute for Multidisciplinary Research
C3  - Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade
T1  - Supercapacitive properties of carbon materials activated by alkali metal hydroxides obtained from sucrose
SP  - 102
EP  - 102
UR  - https://hdl.handle.net/21.15107/rcub_vinar_11485
ER  - 

@conference{
author = "Krstić, Sanja and Dodevski, Vladimir and Čebela, Maria and Rosić, Milena and Egerić, Marija and Vujasin, Radojka and Jaćimovski, Darko",
year = "2023",
abstract = "The main aim of this research is to show influence of different hydroxides, applied in carbon materials activation process on the electrochemical properties of activated carbon samples. The carbon material samples were prepared by hydrothermal treatment of sucrose and thermally activated using KOH, NaOH and LiOH by chemical activation method. The electrochemical properties of the obtained carbon material samples were examined by cyclic voltammetry and electrochemical impedance spectroscopy and correlated to their physicochemical properties. Investigated samples showed characteristic capacitor-like behavior. The best result of specific capacitance was obtained for the sample synthesized treated by KOH, while the increase in capacitance follows the arrangement of the growth of ionic radius of a metal from an alkali which is used for activation. Dependence on the type of hydroxide is due to differences in the radii of a metal. The alkalis with larger radii of metal produce wider pores and consequently the structure of a porous layer become more accessible and available to the charge transfer of capacitive response.",
publisher = "Belgrade : University of Belgrade, Institute for Multidisciplinary Research",
journal = "Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade",
title = "Supercapacitive properties of carbon materials activated by alkali metal hydroxides obtained from sucrose",
pages = "102-102",
url = "https://hdl.handle.net/21.15107/rcub_vinar_11485"
}

Krstić, S., Dodevski, V., Čebela, M., Rosić, M., Egerić, M., Vujasin, R.,& Jaćimovski, D.. (2023). Supercapacitive properties of carbon materials activated by alkali metal hydroxides obtained from sucrose. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade
Belgrade : University of Belgrade, Institute for Multidisciplinary Research., 102-102.
https://hdl.handle.net/21.15107/rcub_vinar_11485

Krstić S, Dodevski V, Čebela M, Rosić M, Egerić M, Vujasin R, Jaćimovski D. Supercapacitive properties of carbon materials activated by alkali metal hydroxides obtained from sucrose. in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade. 2023;:102-102.
https://hdl.handle.net/21.15107/rcub_vinar_11485 .

Krstić, Sanja, Dodevski, Vladimir, Čebela, Maria, Rosić, Milena, Egerić, Marija, Vujasin, Radojka, Jaćimovski, Darko, "Supercapacitive properties of carbon materials activated by alkali metal hydroxides obtained from sucrose" in Programme and the Book of Abstracts / 7th Conference of The Serbian Society for Ceramic Materials, 7CSCS-2023, June 14-16, 2023 Belgrade (2023):102-102,
https://hdl.handle.net/21.15107/rcub_vinar_11485 .

TY  - JOUR
AU  - Jaćimovski, Darko
AU  - Šućurović, Katarina
AU  - Đuriš, Mihal
AU  - Arsenijević, Zorana
AU  - Krstić, Sanja
AU  - Bošković-Vragolović, Nevenka
PY  - 2023
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6303
AB  - In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and non-spherical particles of polypropylene and polyethylene with a diameter of 3.3-4.9 mm and a density of about 930 kg m-3. A diluted solution of methylene blue was used as a fluidization medium, which was adsorbed on part of the surface of the column on silica gel. The obtained results showed that the presence of particles during inverse fluidization does not contribute significantly to mass transfer compared to the influence of particles on transfer in conventional fluidized beds. Therefore, the pseudofluid concept was introduced into the analysis and an empirical correlation was performed to determine the mass transfer coefficient. The obtained results were compared with literature correlations for inverse and conventional fluidized beds.
AB  - У овом раду је одређиван коефицијент преноса масе флуид-зид у инверзнофлуидизованом слоју применом адсорпционе методе. Експерименти су вршени у колони  пречника 45 мм са сферичним и несферичним честицама полипропилена и полиетилена  пречника 3.3-4.9 мм и густине око 930 кг м-3. Као флуидизациони медијум коришћен је  разблажени раствор метиленски плавог који је адсорбован на делу површине колоне на  силикагелу. Добијени резултати показали су да присуство честица при инверзној  флуидизацији не доприноси значајно преносу масе у поређењу са утицајем честица на  пренос масе у конвенционално флуидизованим слојевима. Због тога је у анализу уведен  концепт псеудофлуида и изведена је емпиријска корелација за одређивање коефицијента  преноса масе. Извршено је поређење добијених резултата са литературним корелацијама за  инверзну и конвенционалну флуидизације.
PB  - Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Mass transfer in inverse fluidized beds
T1  - Пренос масе у инверзно флуидизованом слоју
VL  - 88
IS  - 9
SP  - 905
EP  - 919
DO  - 10.2298/JSC230116016J
ER  - 

@article{
author = "Jaćimovski, Darko and Šućurović, Katarina and Đuriš, Mihal and Arsenijević, Zorana and Krstić, Sanja and Bošković-Vragolović, Nevenka",
year = "2023",
abstract = "In this work, the coefficient of fluid-wall mass transfer in an inverse fluidized bed was determined using the adsorption method. The experiments were carried out in a column with a diameter of 45 mm with spherical and non-spherical particles of polypropylene and polyethylene with a diameter of 3.3-4.9 mm and a density of about 930 kg m-3. A diluted solution of methylene blue was used as a fluidization medium, which was adsorbed on part of the surface of the column on silica gel. The obtained results showed that the presence of particles during inverse fluidization does not contribute significantly to mass transfer compared to the influence of particles on transfer in conventional fluidized beds. Therefore, the pseudofluid concept was introduced into the analysis and an empirical correlation was performed to determine the mass transfer coefficient. The obtained results were compared with literature correlations for inverse and conventional fluidized beds., У овом раду је одређиван коефицијент преноса масе флуид-зид у инверзнофлуидизованом слоју применом адсорпционе методе. Експерименти су вршени у колони  пречника 45 мм са сферичним и несферичним честицама полипропилена и полиетилена  пречника 3.3-4.9 мм и густине око 930 кг м-3. Као флуидизациони медијум коришћен је  разблажени раствор метиленски плавог који је адсорбован на делу површине колоне на  силикагелу. Добијени резултати показали су да присуство честица при инверзној  флуидизацији не доприноси значајно преносу масе у поређењу са утицајем честица на  пренос масе у конвенционално флуидизованим слојевима. Због тога је у анализу уведен  концепт псеудофлуида и изведена је емпиријска корелација за одређивање коефицијента  преноса масе. Извршено је поређење добијених резултата са литературним корелацијама за  инверзну и конвенционалну флуидизације.",
publisher = "Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Mass transfer in inverse fluidized beds, Пренос масе у инверзно флуидизованом слоју",
volume = "88",
number = "9",
pages = "905-919",
doi = "10.2298/JSC230116016J"
}

Jaćimovski, D., Šućurović, K., Đuriš, M., Arsenijević, Z., Krstić, S.,& Bošković-Vragolović, N.. (2023). Mass transfer in inverse fluidized beds. in Journal of the Serbian Chemical Society
Serbian Chemical Society., 88(9), 905-919.
https://doi.org/10.2298/JSC230116016J

Jaćimovski D, Šućurović K, Đuriš M, Arsenijević Z, Krstić S, Bošković-Vragolović N. Mass transfer in inverse fluidized beds. in Journal of the Serbian Chemical Society. 2023;88(9):905-919.
doi:10.2298/JSC230116016J .

Jaćimovski, Darko, Šućurović, Katarina, Đuriš, Mihal, Arsenijević, Zorana, Krstić, Sanja, Bošković-Vragolović, Nevenka, "Mass transfer in inverse fluidized beds" in Journal of the Serbian Chemical Society, 88, no. 9 (2023):905-919,
https://doi.org/10.2298/JSC230116016J . .

TY  - JOUR
AU  - Košević, Milica
AU  - Krstić, Sanja
AU  - Panić, Vladimir
AU  - Nikolić, Branislav Ž.
PY  - 2022
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/5395
AB  - The influence of different hydroxides, applied to activate carbon black, on the electrochemical properties of activated carbon was investigated. The carbon material was prepared by hydrothermal treatment of sucrose and afterwards thermally activated using KOH, NaOH and LiOH. The electrochemical properties of the obtained samples were examined by cyclic voltammetry and electrochemical impedance spectroscopy and correlated to their physicochemical properties. All samples showed characteristic capacitor-like behaviour. The highest specific capacitance was obtained for the KOH-treated sample, while the increase in capacitance follows the sequence of the growth of ionic radius of a metal from an alkali which is used for activation. It was found that the dependence on the type of hydroxide is due to differences in the radii of a metal. The alkalies of larger radii of metal generated make pores wider and consequently the structure of a porous layer become more accessible to the charge transfer of capacitive response.
AB  - Испитиван је утицај различитих активирајућих хидроксида на електрохемијска својства активираних угљеничних материјала. Угљенични материјал је добијен хидротермалним третманом сахарозе, а потом активиран помоћу KOH, NaOH и LiOH. Електрохемијска својства добијених узорака испитивана су цикличном волтаметријом и спектроскопијом електрохемијске импеданције. Синтетизовани материјали показују капацитивна својства. Највећа специфична капацитивност добијена је за узорак третиран помоћу KOH, док капацитивност прати величину пречника јона метала из алкалије којом је активиран угљенични материјал.
PB  - Belgrade : Serbian Chemical Society
T2  - Journal of the Serbian Chemical Society
T1  - Supercapacitive properties of the alkali metal hydroxides-activated carbons obtained from sucrose
T1  - Суперкапацитативна својства угљеничних материјала добијених из сахарозе и активираних хидроксидима алкалних метала
VL  - 87
IS  - 7-8
SP  - 867
EP  - 877
DO  - 10.2298/JSC220730059K
ER  - 

@article{
author = "Košević, Milica and Krstić, Sanja and Panić, Vladimir and Nikolić, Branislav Ž.",
year = "2022",
abstract = "The influence of different hydroxides, applied to activate carbon black, on the electrochemical properties of activated carbon was investigated. The carbon material was prepared by hydrothermal treatment of sucrose and afterwards thermally activated using KOH, NaOH and LiOH. The electrochemical properties of the obtained samples were examined by cyclic voltammetry and electrochemical impedance spectroscopy and correlated to their physicochemical properties. All samples showed characteristic capacitor-like behaviour. The highest specific capacitance was obtained for the KOH-treated sample, while the increase in capacitance follows the sequence of the growth of ionic radius of a metal from an alkali which is used for activation. It was found that the dependence on the type of hydroxide is due to differences in the radii of a metal. The alkalies of larger radii of metal generated make pores wider and consequently the structure of a porous layer become more accessible to the charge transfer of capacitive response., Испитиван је утицај различитих активирајућих хидроксида на електрохемијска својства активираних угљеничних материјала. Угљенични материјал је добијен хидротермалним третманом сахарозе, а потом активиран помоћу KOH, NaOH и LiOH. Електрохемијска својства добијених узорака испитивана су цикличном волтаметријом и спектроскопијом електрохемијске импеданције. Синтетизовани материјали показују капацитивна својства. Највећа специфична капацитивност добијена је за узорак третиран помоћу KOH, док капацитивност прати величину пречника јона метала из алкалије којом је активиран угљенични материјал.",
publisher = "Belgrade : Serbian Chemical Society",
journal = "Journal of the Serbian Chemical Society",
title = "Supercapacitive properties of the alkali metal hydroxides-activated carbons obtained from sucrose, Суперкапацитативна својства угљеничних материјала добијених из сахарозе и активираних хидроксидима алкалних метала",
volume = "87",
number = "7-8",
pages = "867-877",
doi = "10.2298/JSC220730059K"
}

Košević, M., Krstić, S., Panić, V.,& Nikolić, B. Ž.. (2022). Supercapacitive properties of the alkali metal hydroxides-activated carbons obtained from sucrose. in Journal of the Serbian Chemical Society
Belgrade : Serbian Chemical Society., 87(7-8), 867-877.
https://doi.org/10.2298/JSC220730059K

Košević M, Krstić S, Panić V, Nikolić BŽ. Supercapacitive properties of the alkali metal hydroxides-activated carbons obtained from sucrose. in Journal of the Serbian Chemical Society. 2022;87(7-8):867-877.
doi:10.2298/JSC220730059K .

Košević, Milica, Krstić, Sanja, Panić, Vladimir, Nikolić, Branislav Ž., "Supercapacitive properties of the alkali metal hydroxides-activated carbons obtained from sucrose" in Journal of the Serbian Chemical Society, 87, no. 7-8 (2022):867-877,
https://doi.org/10.2298/JSC220730059K . .

TY  - JOUR
AU  - Kaluđerović, Branka
AU  - Jovanović, Vladislava M.
AU  - Stevanović, Sanja
AU  - Bogdanov, Zarko D.
AU  - Sanja Krstić
AU  - Dodevski, Vladimir
PY  - 2020
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/4221
AB  - Carbon materials with developed porosity are usually used as supports for platinum catalysts. Physico-chemical characteristics of the support influence the properties of platinum deposited and its catalytic activity. In our studies, we deposited platinum on carbon fibrous like materials obtained from platanus seeds-achenes. The precursor was chemically activated with different reagents: NaOH, pyrogallol, and H2O2, before the carbonization process. Platinum was deposited on all substrates to study the influence of the substrate properties on the activity of the catalyst. Carbon materials were characterized by nitrogen adsorption/desorption isotherms measurements, X-ray diffraction, and scanning electron microscopy. It was noticed that the adsorption characteristics of carbon support affected the structure of platinum deposits and thus their activity.
PB  - Serbia : Association of Metallurgical Engineers of Serbia
T2  - Metallurgical and Materials Engineering
T1  - Characterization of carbon fibrous material from platanus achenes as platinum catalysts support
VL  - 26
IS  - 4
SP  - 375
EP  - 383
DO  - 10.30544/588
ER  - 

@article{
author = "Kaluđerović, Branka and Jovanović, Vladislava M. and Stevanović, Sanja and Bogdanov, Zarko D. and Sanja Krstić and Dodevski, Vladimir",
year = "2020",
abstract = "Carbon materials with developed porosity are usually used as supports for platinum catalysts. Physico-chemical characteristics of the support influence the properties of platinum deposited and its catalytic activity. In our studies, we deposited platinum on carbon fibrous like materials obtained from platanus seeds-achenes. The precursor was chemically activated with different reagents: NaOH, pyrogallol, and H2O2, before the carbonization process. Platinum was deposited on all substrates to study the influence of the substrate properties on the activity of the catalyst. Carbon materials were characterized by nitrogen adsorption/desorption isotherms measurements, X-ray diffraction, and scanning electron microscopy. It was noticed that the adsorption characteristics of carbon support affected the structure of platinum deposits and thus their activity.",
publisher = "Serbia : Association of Metallurgical Engineers of Serbia",
journal = "Metallurgical and Materials Engineering",
title = "Characterization of carbon fibrous material from platanus achenes as platinum catalysts support",
volume = "26",
number = "4",
pages = "375-383",
doi = "10.30544/588"
}

Kaluđerović, B., Jovanović, V. M., Stevanović, S., Bogdanov, Z. D., Sanja Krstić,& Dodevski, V.. (2020). Characterization of carbon fibrous material from platanus achenes as platinum catalysts support. in Metallurgical and Materials Engineering
Serbia : Association of Metallurgical Engineers of Serbia., 26(4), 375-383.
https://doi.org/10.30544/588

Kaluđerović B, Jovanović VM, Stevanović S, Bogdanov ZD, Sanja Krstić, Dodevski V. Characterization of carbon fibrous material from platanus achenes as platinum catalysts support. in Metallurgical and Materials Engineering. 2020;26(4):375-383.
doi:10.30544/588 .

Kaluđerović, Branka, Jovanović, Vladislava M., Stevanović, Sanja, Bogdanov, Zarko D., Sanja Krstić, Dodevski, Vladimir, "Characterization of carbon fibrous material from platanus achenes as platinum catalysts support" in Metallurgical and Materials Engineering, 26, no. 4 (2020):375-383,
https://doi.org/10.30544/588 . .

TY  - JOUR
AU  - Kaluđerović, Branka
AU  - Čokeša, Đuro
AU  - Dodevski, Vladimir
AU  - Krstić, Sanja
AU  - Jovanović, Vladislava M.
PY  - 2015
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1687
AB  - Nanostructures of noble metals (Pt and Ag) on carbon support were prepared from fructose and solution of the Nobel metal salts (H2PtCl6 x 6H2O or AgNO3) under hydrothermal conditions. Commercial fructose (C6H12O6) acts as the carbon source and reducing agent and noble metal salts is a source of the metal to be incorporated in the new formed carbon material structure. The crystalline structure was examined by X-ray diffraction (XRD) and morphology investigated by scanning electron microscopy (SEM). The crystallite size of the deposited particles could be estimated by evaluating the line width of the Bragg peak applying the Scherrer method. All the XRD patterns clearly show the five main characteristic peaks of the face-centered cubic (fcc) crystalline for both Pt and Ag crystallite. The obtained Pt crystallite sizes were below 5.5 nm, while the Ag crystallite sizes were about 32 or 34nm.
AB  - Nanostrukture plemenitih metala (Pt i Ag) na ugljeničnom materijalu, kao nosaču, su napravljene, polazeći od fruktoze i rastvora soli plemenitih metala (H2PtCl6 x 6H2O ili AgNO3) pri hidrotermalnim uslovima. Komercijalna fruktoza (C6H12O6) deluje kao izvor ugljenika i redukujući agens, a soli plemenitih metala, kao izvor metala, koji treba da se inkorporira u novonastalu strukturu ugljeničnog materijala. Kristalita struktura je ispitivana pomoću difrakcije X-zraka (XRD) a morfologija je ispitivana pomoću skanirajuće elektronske mikroskopije (SEM). Veličina kristalita deponovanih čestica se računa iz širine linije Bragg-ovog pika koristeći Scherrer-ov metod. Svi XRD uzorci jasno pokazuju pet karakterističnih pikova površinski centrirane kristalne rešetke (fcc) i za kristalite Pt i za kristalite Ag. Dobijeni kristaliti Pt imaju veličinu manju od 5.5 nm, dok su veličine kristalita Ag oko 32 i 34nm.
PB  - Belgrade, Serbia : Engineering Society for Corrosion
T2  - Zaštita materijala
T1  - Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process
T1  - Direktna sinteza nanostrukturnog plemenitog metala na ugljeničnoj osnovi pomoću hidrotermalnog procesa
VL  - 56
IS  - 4
SP  - 409
EP  - 412
DO  - 10.5937/ZasMat1504409K
ER  - 

@article{
author = "Kaluđerović, Branka and Čokeša, Đuro and Dodevski, Vladimir and Krstić, Sanja and Jovanović, Vladislava M.",
year = "2015",
abstract = "Nanostructures of noble metals (Pt and Ag) on carbon support were prepared from fructose and solution of the Nobel metal salts (H2PtCl6 x 6H2O or AgNO3) under hydrothermal conditions. Commercial fructose (C6H12O6) acts as the carbon source and reducing agent and noble metal salts is a source of the metal to be incorporated in the new formed carbon material structure. The crystalline structure was examined by X-ray diffraction (XRD) and morphology investigated by scanning electron microscopy (SEM). The crystallite size of the deposited particles could be estimated by evaluating the line width of the Bragg peak applying the Scherrer method. All the XRD patterns clearly show the five main characteristic peaks of the face-centered cubic (fcc) crystalline for both Pt and Ag crystallite. The obtained Pt crystallite sizes were below 5.5 nm, while the Ag crystallite sizes were about 32 or 34nm., Nanostrukture plemenitih metala (Pt i Ag) na ugljeničnom materijalu, kao nosaču, su napravljene, polazeći od fruktoze i rastvora soli plemenitih metala (H2PtCl6 x 6H2O ili AgNO3) pri hidrotermalnim uslovima. Komercijalna fruktoza (C6H12O6) deluje kao izvor ugljenika i redukujući agens, a soli plemenitih metala, kao izvor metala, koji treba da se inkorporira u novonastalu strukturu ugljeničnog materijala. Kristalita struktura je ispitivana pomoću difrakcije X-zraka (XRD) a morfologija je ispitivana pomoću skanirajuće elektronske mikroskopije (SEM). Veličina kristalita deponovanih čestica se računa iz širine linije Bragg-ovog pika koristeći Scherrer-ov metod. Svi XRD uzorci jasno pokazuju pet karakterističnih pikova površinski centrirane kristalne rešetke (fcc) i za kristalite Pt i za kristalite Ag. Dobijeni kristaliti Pt imaju veličinu manju od 5.5 nm, dok su veličine kristalita Ag oko 32 i 34nm.",
publisher = "Belgrade, Serbia : Engineering Society for Corrosion",
journal = "Zaštita materijala",
title = "Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process, Direktna sinteza nanostrukturnog plemenitog metala na ugljeničnoj osnovi pomoću hidrotermalnog procesa",
volume = "56",
number = "4",
pages = "409-412",
doi = "10.5937/ZasMat1504409K"
}

Kaluđerović, B., Čokeša, Đ., Dodevski, V., Krstić, S.,& Jovanović, V. M.. (2015). Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process. in Zaštita materijala
Belgrade, Serbia : Engineering Society for Corrosion., 56(4), 409-412.
https://doi.org/10.5937/ZasMat1504409K

Kaluđerović B, Čokeša Đ, Dodevski V, Krstić S, Jovanović VM. Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process. in Zaštita materijala. 2015;56(4):409-412.
doi:10.5937/ZasMat1504409K .

Kaluđerović, Branka, Čokeša, Đuro, Dodevski, Vladimir, Krstić, Sanja, Jovanović, Vladislava M., "Direct synthesis of noble metal nanostructures on carbon support by hydrothermal process" in Zaštita materijala, 56, no. 4 (2015):409-412,
https://doi.org/10.5937/ZasMat1504409K . .