TY  - JOUR
AU  - Presburger Ulniković, Vladanka
AU  - Vukic, Marija
AU  - Milutinović Nikolić, Aleksandra
PY  - 2013
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/1330
AB  - This study focuses on the issues related to the waste management in river ports in general and, particularly, in ports on the river Danube's flow through Serbia. The ports of Apatin, Bezdan, Backa Palanka, Novi Sad, Belgrade, Smederevo, Veliko Gradiste, Prahovo and Kladovo were analyzed. The input data (number of watercrafts, passengers and crew members) were obtained from harbor authorities for the period 2005-2009. The quantities of solid waste generated on both cruise and cargo ships are considered in this article. As there is no strategy for waste treatment in the ports in Serbia, these data are extremely valuable for further design of equipment for waste treatment and collection. Trends in data were analyzed and regression models were used to predict the waste quantities in each port in next 3 years. The obtained trends could be utilized as the basis for the calculation of the equipment capacities for waste selection, collection, storage and treatment. The results presented in this study establish the need for an organized management system for this type of waste, as well as suggest where the terminals for collection, storage and treatment of solid waste from ships should be located.
PB  - Sage Publications Ltd, London
T2  - Waste Management & Research
T1  - Analysis of solid waste from ships and modeling of its generation on the river Danube in Serbia
VL  - 31
IS  - 6
SP  - 618
EP  - 624
DO  - 10.1177/0734242X13477716
ER  - 

@article{
author = "Presburger Ulniković, Vladanka and Vukic, Marija and Milutinović Nikolić, Aleksandra",
year = "2013",
abstract = "This study focuses on the issues related to the waste management in river ports in general and, particularly, in ports on the river Danube's flow through Serbia. The ports of Apatin, Bezdan, Backa Palanka, Novi Sad, Belgrade, Smederevo, Veliko Gradiste, Prahovo and Kladovo were analyzed. The input data (number of watercrafts, passengers and crew members) were obtained from harbor authorities for the period 2005-2009. The quantities of solid waste generated on both cruise and cargo ships are considered in this article. As there is no strategy for waste treatment in the ports in Serbia, these data are extremely valuable for further design of equipment for waste treatment and collection. Trends in data were analyzed and regression models were used to predict the waste quantities in each port in next 3 years. The obtained trends could be utilized as the basis for the calculation of the equipment capacities for waste selection, collection, storage and treatment. The results presented in this study establish the need for an organized management system for this type of waste, as well as suggest where the terminals for collection, storage and treatment of solid waste from ships should be located.",
publisher = "Sage Publications Ltd, London",
journal = "Waste Management & Research",
title = "Analysis of solid waste from ships and modeling of its generation on the river Danube in Serbia",
volume = "31",
number = "6",
pages = "618-624",
doi = "10.1177/0734242X13477716"
}

Presburger Ulniković, V., Vukic, M.,& Milutinović Nikolić, A.. (2013). Analysis of solid waste from ships and modeling of its generation on the river Danube in Serbia. in Waste Management & Research
Sage Publications Ltd, London., 31(6), 618-624.
https://doi.org/10.1177/0734242X13477716

Presburger Ulniković V, Vukic M, Milutinović Nikolić A. Analysis of solid waste from ships and modeling of its generation on the river Danube in Serbia. in Waste Management & Research. 2013;31(6):618-624.
doi:10.1177/0734242X13477716 .

Presburger Ulniković, Vladanka, Vukic, Marija, Milutinović Nikolić, Aleksandra, "Analysis of solid waste from ships and modeling of its generation on the river Danube in Serbia" in Waste Management & Research, 31, no. 6 (2013):618-624,
https://doi.org/10.1177/0734242X13477716 . .

TY  - JOUR
AU  - Milutinović Nikolić, Aleksandra
AU  - Presburger Ulniković, Vladanka
AU  - Veličković, Sava
AU  - Aleksić, Radoslav
PY  - 2003
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/3458
AB  - The aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with mechanical and dielectric properties that satisfy the quality needed for production of printed circuit boards for microelectronics. 
Commercial materials: glass woven fabric, different types of silane finish and epoxy resin were starting materials in obtaining composites.  The conditions needed for the thermal removal of the original size from glass fabric were investigated. The optimal heat treatment should be performed at temperatures less than 550 оC, while cooling rates should be as slow as possible. In this manner the fabric has less than 0.1% of residual size, and the mechanical properties remain satisfactory.
Different types of adhesion promoters based on silanes were applied on heat-treated glass fabric as finishes. The quality of the composite material made of thermally and chemically treated glass fabric and epoxy resin was controlled by measuring the tensile and dielectric strength of composite. Depending on which properties of composite are of main concern, mechanical or dielectric, finish with amino functional group and lower heat treatment temperature or epoxy modified coatings and higher heat treatment temperature should be used for obtaining glass-fabric epoxy resin laminar composites.
PB  - Springer Netherlands
T2  - Journal of Materials Science: Materials in Electronics
T1  - The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites
VL  - 14
IS  - 2
SP  - 75
EP  - 79
DO  - 10.1023/A:1021948502150
ER  - 

@article{
author = "Milutinović Nikolić, Aleksandra and Presburger Ulniković, Vladanka and Veličković, Sava and Aleksić, Radoslav",
year = "2003",
abstract = "The aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with mechanical and dielectric properties that satisfy the quality needed for production of printed circuit boards for microelectronics. 
Commercial materials: glass woven fabric, different types of silane finish and epoxy resin were starting materials in obtaining composites.  The conditions needed for the thermal removal of the original size from glass fabric were investigated. The optimal heat treatment should be performed at temperatures less than 550 оC, while cooling rates should be as slow as possible. In this manner the fabric has less than 0.1% of residual size, and the mechanical properties remain satisfactory.
Different types of adhesion promoters based on silanes were applied on heat-treated glass fabric as finishes. The quality of the composite material made of thermally and chemically treated glass fabric and epoxy resin was controlled by measuring the tensile and dielectric strength of composite. Depending on which properties of composite are of main concern, mechanical or dielectric, finish with amino functional group and lower heat treatment temperature or epoxy modified coatings and higher heat treatment temperature should be used for obtaining glass-fabric epoxy resin laminar composites.",
publisher = "Springer Netherlands",
journal = "Journal of Materials Science: Materials in Electronics",
title = "The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites",
volume = "14",
number = "2",
pages = "75-79",
doi = "10.1023/A:1021948502150"
}

Milutinović Nikolić, A., Presburger Ulniković, V., Veličković, S.,& Aleksić, R.. (2003). The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites. in Journal of Materials Science: Materials in Electronics
Springer Netherlands., 14(2), 75-79.
https://doi.org/10.1023/A:1021948502150

Milutinović Nikolić A, Presburger Ulniković V, Veličković S, Aleksić R. The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites. in Journal of Materials Science: Materials in Electronics. 2003;14(2):75-79.
doi:10.1023/A:1021948502150 .

Milutinović Nikolić, Aleksandra, Presburger Ulniković, Vladanka, Veličković, Sava, Aleksić, Radoslav, "The influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar composites" in Journal of Materials Science: Materials in Electronics, 14, no. 2 (2003):75-79,
https://doi.org/10.1023/A:1021948502150 . .

TY  - JOUR
AU  - Milutinović Nikolić, Aleksandra
AU  - Presburger-Ulniković, Vladanka
AU  - Aleksić, Radoslav
PY  - 2002
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/6900
AB  - The aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with appropriate mechanical properties that satisfy the quality needed for production of printed circuit boards for microelectronics. Commercial materials: domestic glass woven fabric, different types of silane finish and epoxy resin were starting materials in obtaining composites.  
 The conditions needed for the thermal removal of the original size from glass fabric were investigated. The optimal heat treatment should be performed on temperatures less than 550C, while cooling rate should be as slow as possible. In this manner the fabric has less than 0.1% of residual size, and the mechanical properties remain satisfactory.
 	Two most commonly used silane based finishes were applied on heat-treated glass fabric. Tensile strength of the composite material made of thermally and chemically treated glass fabric and epoxy resin was investigated. The possibility of using domestic glass fabric in production of printed circuit boards for microelectronics  has been confirmed. Finish with amino functional group and lower heat treatment temperature should be used for obtaining glass-fabric epoxy resin laminar composites with desirable mechanical properties.
PB  - Savez inženjera metalurgije Jugoslavije- Yugoslav Association of Metallurgical Engineers
T2  - Metalurgija
T1  - The influence of heat treatment and finishing on the mechanical properties of laminar composites
VL  - 8
IS  - 3
SP  - 229
EP  - 234
UR  - https://hdl.handle.net/21.15107/rcub_cer_6900
ER  - 

@article{
author = "Milutinović Nikolić, Aleksandra and Presburger-Ulniković, Vladanka and Aleksić, Radoslav",
year = "2002",
abstract = "The aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with appropriate mechanical properties that satisfy the quality needed for production of printed circuit boards for microelectronics. Commercial materials: domestic glass woven fabric, different types of silane finish and epoxy resin were starting materials in obtaining composites.  
 The conditions needed for the thermal removal of the original size from glass fabric were investigated. The optimal heat treatment should be performed on temperatures less than 550C, while cooling rate should be as slow as possible. In this manner the fabric has less than 0.1% of residual size, and the mechanical properties remain satisfactory.
 	Two most commonly used silane based finishes were applied on heat-treated glass fabric. Tensile strength of the composite material made of thermally and chemically treated glass fabric and epoxy resin was investigated. The possibility of using domestic glass fabric in production of printed circuit boards for microelectronics  has been confirmed. Finish with amino functional group and lower heat treatment temperature should be used for obtaining glass-fabric epoxy resin laminar composites with desirable mechanical properties.",
publisher = "Savez inženjera metalurgije Jugoslavije- Yugoslav Association of Metallurgical Engineers",
journal = "Metalurgija",
title = "The influence of heat treatment and finishing on the mechanical properties of laminar composites",
volume = "8",
number = "3",
pages = "229-234",
url = "https://hdl.handle.net/21.15107/rcub_cer_6900"
}

Milutinović Nikolić, A., Presburger-Ulniković, V.,& Aleksić, R.. (2002). The influence of heat treatment and finishing on the mechanical properties of laminar composites. in Metalurgija
Savez inženjera metalurgije Jugoslavije- Yugoslav Association of Metallurgical Engineers., 8(3), 229-234.
https://hdl.handle.net/21.15107/rcub_cer_6900

Milutinović Nikolić A, Presburger-Ulniković V, Aleksić R. The influence of heat treatment and finishing on the mechanical properties of laminar composites. in Metalurgija. 2002;8(3):229-234.
https://hdl.handle.net/21.15107/rcub_cer_6900 .

Milutinović Nikolić, Aleksandra, Presburger-Ulniković, Vladanka, Aleksić, Radoslav, "The influence of heat treatment and finishing on the mechanical properties of laminar composites" in Metalurgija, 8, no. 3 (2002):229-234,
https://hdl.handle.net/21.15107/rcub_cer_6900 .