The influence of heat treatment and finishing on the mechanical properties of laminar composites
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with appropriate mechanical properties that satisfy the quality needed for production of printed circuit boards for microelectronics. Commercial materials: domestic glass woven fabric, different types of silane finish and epoxy resin were starting materials in obtaining composites.
The conditions needed for the thermal removal of the original size from glass fabric were investigated. The optimal heat treatment should be performed on temperatures less than 550C, while cooling rate should be as slow as possible. In this manner the fabric has less than 0.1% of residual size, and the mechanical properties remain satisfactory.
Two most commonly used silane based finishes were applied on heat-treated glass fabric. Tensile strength of the composite material made of thermally and chemically treated glass fabric and epoxy resin was investigated. The possibility o...f using domestic glass fabric in production of printed circuit boards for microelectronics has been confirmed. Finish with amino functional group and lower heat treatment temperature should be used for obtaining glass-fabric epoxy resin laminar composites with desirable mechanical properties.
Кључне речи:
Heat treatment / silane finishes / tensile strength / glass fabric - epoxy resin laminar compositesИзвор:
Metalurgija, 2002, 8, 3, 229-234Издавач:
- Savez inženjera metalurgije Jugoslavije- Yugoslav Association of Metallurgical Engineers
Институција/група
IHTMTY - JOUR AU - Milutinović Nikolić, Aleksandra AU - Presburger-Ulniković, Vladanka AU - Aleksić, Radoslav PY - 2002 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/6900 AB - The aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with appropriate mechanical properties that satisfy the quality needed for production of printed circuit boards for microelectronics. Commercial materials: domestic glass woven fabric, different types of silane finish and epoxy resin were starting materials in obtaining composites. The conditions needed for the thermal removal of the original size from glass fabric were investigated. The optimal heat treatment should be performed on temperatures less than 550C, while cooling rate should be as slow as possible. In this manner the fabric has less than 0.1% of residual size, and the mechanical properties remain satisfactory. Two most commonly used silane based finishes were applied on heat-treated glass fabric. Tensile strength of the composite material made of thermally and chemically treated glass fabric and epoxy resin was investigated. The possibility of using domestic glass fabric in production of printed circuit boards for microelectronics has been confirmed. Finish with amino functional group and lower heat treatment temperature should be used for obtaining glass-fabric epoxy resin laminar composites with desirable mechanical properties. PB - Savez inženjera metalurgije Jugoslavije- Yugoslav Association of Metallurgical Engineers T2 - Metalurgija T1 - The influence of heat treatment and finishing on the mechanical properties of laminar composites VL - 8 IS - 3 SP - 229 EP - 234 UR - https://hdl.handle.net/21.15107/rcub_cer_6900 ER -
@article{ author = "Milutinović Nikolić, Aleksandra and Presburger-Ulniković, Vladanka and Aleksić, Radoslav", year = "2002", abstract = "The aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with appropriate mechanical properties that satisfy the quality needed for production of printed circuit boards for microelectronics. Commercial materials: domestic glass woven fabric, different types of silane finish and epoxy resin were starting materials in obtaining composites. The conditions needed for the thermal removal of the original size from glass fabric were investigated. The optimal heat treatment should be performed on temperatures less than 550C, while cooling rate should be as slow as possible. In this manner the fabric has less than 0.1% of residual size, and the mechanical properties remain satisfactory. Two most commonly used silane based finishes were applied on heat-treated glass fabric. Tensile strength of the composite material made of thermally and chemically treated glass fabric and epoxy resin was investigated. The possibility of using domestic glass fabric in production of printed circuit boards for microelectronics has been confirmed. Finish with amino functional group and lower heat treatment temperature should be used for obtaining glass-fabric epoxy resin laminar composites with desirable mechanical properties.", publisher = "Savez inženjera metalurgije Jugoslavije- Yugoslav Association of Metallurgical Engineers", journal = "Metalurgija", title = "The influence of heat treatment and finishing on the mechanical properties of laminar composites", volume = "8", number = "3", pages = "229-234", url = "https://hdl.handle.net/21.15107/rcub_cer_6900" }
Milutinović Nikolić, A., Presburger-Ulniković, V.,& Aleksić, R.. (2002). The influence of heat treatment and finishing on the mechanical properties of laminar composites. in Metalurgija Savez inženjera metalurgije Jugoslavije- Yugoslav Association of Metallurgical Engineers., 8(3), 229-234. https://hdl.handle.net/21.15107/rcub_cer_6900
Milutinović Nikolić A, Presburger-Ulniković V, Aleksić R. The influence of heat treatment and finishing on the mechanical properties of laminar composites. in Metalurgija. 2002;8(3):229-234. https://hdl.handle.net/21.15107/rcub_cer_6900 .
Milutinović Nikolić, Aleksandra, Presburger-Ulniković, Vladanka, Aleksić, Radoslav, "The influence of heat treatment and finishing on the mechanical properties of laminar composites" in Metalurgija, 8, no. 3 (2002):229-234, https://hdl.handle.net/21.15107/rcub_cer_6900 .