Prikaz osnovnih podataka o dokumentu
Characterization of PDMS membranes fabricated by bulkmicromachining on silicon wafers
dc.creator | Jović, Vesna | |
dc.creator | Đinović, Zoran | |
dc.creator | Radovanović, Filip | |
dc.creator | Starčević, Marko | |
dc.creator | Lamovec, Jelena | |
dc.creator | Smiljanić, Milče | |
dc.creator | Lazić, Žarko | |
dc.date.accessioned | 2019-02-06T12:25:38Z | |
dc.date.available | 2019-02-06T12:25:38Z | |
dc.date.issued | 2014 | |
dc.identifier.uri | http://dais.sanu.ac.rs/123456789/785 | |
dc.identifier.uri | https://cer.ihtm.bg.ac.rs/handle/123456789/2605 | |
dc.description.abstract | In this paper we proposed microfabrication scheme for PDMS (Polydimethylsiloxane) thin membrane fabrication on Si micromachined cavities with square cross section. PDMS network samples for this research were synthesized with the same composition, which are Sylgard 184 (Dow Corning, USA) silicone elastomer base and silicone elastomer curing agent, volume ratio 10:1. Mechanical testing of PDMS elastic properties and bond strength between membranes and oxidized Si wafers, were investigated applying pressurized bulge testing In this paper experimentally determined dependence of the PDMS membrane deflection on pressure load for different membrane thicknesses and sizes of square cavities in Si wafers are given. Also, the influence of different types of Si wafer structuring by anisotropic wet chemical etching on membrane bonding strength were considered. | en |
dc.format | (2014) 674-679 | |
dc.format | application/pdf | |
dc.language | en | |
dc.publisher | Belgrade : Military Technical Institute | |
dc.relation | info:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/32008/RS// | |
dc.relation | Integrated Microsystems Austria GmbH, Wiener Neustadt, Österreich – Austrian Center for Medical Inovation and Technology, Phase Change Actuator (PCA) for Steering Catheter (INP 103-PCA) | |
dc.rights | openAccess | |
dc.source | 6th International Scientific Conference on Defensive Technologies, OTEH 2014, Belgrade, 09-10 October 2014: Proceedings | en |
dc.subject | Polydimethylsiloxane (PDMS) | |
dc.subject | bulk silicon micromachining | |
dc.subject | silicone elastomer membrane | |
dc.subject | bulging test | |
dc.subject | bonding strength | |
dc.title | Characterization of PDMS membranes fabricated by bulkmicromachining on silicon wafers | en |
dc.type | conferenceObject | |
dc.rights.license | ARR | |
dcterms.abstract | Ђиновић, Зоран; Јовић, Весна; Ламовец, Јелена; Радовановић, Филип; Смиљанић, Милче; Лазић, Жарко; Старчевић, Марко; | |
dc.citation.spage | 674 | |
dc.citation.epage | 679 | |
dc.identifier.rcub | https://hdl.handle.net/21.15107/rcub_dais_785 | |
dc.identifier.fulltext | https://cer.ihtm.bg.ac.rs//bitstream/id/8913/2604.pdf | |
dc.type.version | publishedVersion |