Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology
Autori
Vuksanović, MarijaMladenović, Ivana
Stupar, Stevan
Marinković, Aleksandar
Jančić-Heinemann, Radmila
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modified
plant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained from
waste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the produced
silica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigate
the mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization of
composite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) and
measurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM)
regression analysis. T...he maximal microhardness values (0.459 GPa) were obtained of type modification of silica particles with
vinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and load
for comparison of measurements between different composite materials and to enable the choice of the material in terms of
optimization of the quality of reinforcement and quality of interphase determined by surface modification.
Ključne reči:
Unsaturated polyester composites / biosilica / response surface methodology / optimizationIzvor:
Polymers and Polymer Composites, 2024, 32, 1-12Izdavač:
- SAGE
Finansiranje / projekti:
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200026 (Univerzitet u Beogradu, Institut za hemiju, tehnologiju i metalurgiju - IHTM) (RS-MESTD-inst-2020-200026)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200135 (Univerzitet u Beogradu, Tehnološko-metalurški fakultet) (RS-MESTD-inst-2020-200135)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200017 (Univerzitet u Beogradu, Institut za nuklearne nauke Vinča, Beograd-Vinča) (RS-MESTD-inst-2020-200017)
- Ministarstvo nauke, tehnološkog razvoja i inovacija Republike Srbije, institucionalno finansiranje - 200287 (Inovacioni centar Tehnološko-metalurškog fakulteta u Beogradu doo) (RS-MESTD-inst-2020-200287)
Institucija/grupa
IHTMTY - JOUR AU - Vuksanović, Marija AU - Mladenović, Ivana AU - Stupar, Stevan AU - Marinković, Aleksandar AU - Jančić-Heinemann, Radmila PY - 2024 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/7366 AB - Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modified plant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained from waste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the produced silica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigate the mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization of composite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) and measurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM) regression analysis. The maximal microhardness values (0.459 GPa) were obtained of type modification of silica particles with vinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and load for comparison of measurements between different composite materials and to enable the choice of the material in terms of optimization of the quality of reinforcement and quality of interphase determined by surface modification. PB - SAGE T2 - Polymers and Polymer Composites T1 - Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology VL - 32 SP - 1 EP - 12 DO - 10.1177/09673911241228 ER -
@article{ author = "Vuksanović, Marija and Mladenović, Ivana and Stupar, Stevan and Marinković, Aleksandar and Jančić-Heinemann, Radmila", year = "2024", abstract = "Polymer composites based on unsaturated polyester resin (UPR) and reinforced with particles based on unmodified/modified plant provenance biosilica particles were synthesized and characterized. An unsaturated polyester resin was obtained from waste poly (ethylene terephthalate (PET). Biosilaca particles are made from rice husk biomass. The surface of the produced silica particles was modified using three different silanes: 3-trimethoxysilylpropyl methacrylate (MEMO), trimethoxyvinylsilane (TMEVS), and 3-aminopropyltrimethoxysilane (APTMS). The microhardness test method was used to investigate the mechanical properties of synthesized composite material with variations in dwell times and applied loads. Optimization of composite microhardness value prediction in function of synthesized parameters (type of modification of silica particles) and measurement parameters (applied loads and dwell times) was done using the method of response surface methodology (RSM) regression analysis. The maximal microhardness values (0.459 GPa) were obtained of type modification of silica particles with vinyl with 80% confidence for 120 experimental variables. This method can be used to choose the optimal dwell time and load for comparison of measurements between different composite materials and to enable the choice of the material in terms of optimization of the quality of reinforcement and quality of interphase determined by surface modification.", publisher = "SAGE", journal = "Polymers and Polymer Composites", title = "Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology", volume = "32", pages = "1-12", doi = "10.1177/09673911241228" }
Vuksanović, M., Mladenović, I., Stupar, S., Marinković, A.,& Jančić-Heinemann, R.. (2024). Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology. in Polymers and Polymer Composites SAGE., 32, 1-12. https://doi.org/10.1177/09673911241228
Vuksanović M, Mladenović I, Stupar S, Marinković A, Jančić-Heinemann R. Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology. in Polymers and Polymer Composites. 2024;32:1-12. doi:10.1177/09673911241228 .
Vuksanović, Marija, Mladenović, Ivana, Stupar, Stevan, Marinković, Aleksandar, Jančić-Heinemann, Radmila, "Microhardness measurement optimization in green derived silica/polyester composites using response surface methodology" in Polymers and Polymer Composites, 32 (2024):1-12, https://doi.org/10.1177/09673911241228 . .