BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) composites synthesized by thermal decomposition: The influence of phase composition and sintering temperature on their physical properties
Uticaj faznog sastava i temperature sinterovanja na fizička svojstva BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) kompozita sintetisanih metodom termalne dekompozicije
Аутори
Šuljagić, MarijaPetronijević, Ivan
Mirković, Miljana
Kremenović, Aleksandar
Džunuzović, Adis
Pavlović, Vladimir
Kalezić-Glišović, Aleksandra
Anđelković, Ljubica
Конференцијски прилог (Објављена верзија)
,
Serbian Cristallographic Soceity / Srpsko Kristalografsko društvo
Метаподаци
Приказ свих података о документуАпстракт
In order to examine the influence of phase composition and sintering temperature on the functional properties of perovskite/spinel composites, BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface. Acetylacetonate complexes were used as the precursors. The obtained powders were compressed to pellets and sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the comprehensive investigation of phase composition and morphology. The magnetic, dielectric, and ferroelectric properties were performed in detail. The optimal phase composition was found in the BaTiO3/NiFe2O4 composite sintered at 1150 °C, which resulted in a wide frequency range stability. Furthermore, particular phase composition led to suitable properties such as low conductivity and ideal-like hysteresis loop behavior [1]. Th...ese functional properties of BaTiO3/NiFe2O4 make this composite a “material of choice“ for further studies on applications of multiferroic devices.
U cilju ispitivanja uticaja faznog sastava i temperature sinterovanja na funkcionalna svojstva perovskit/spinel kompozita BaTiO3/NixZn1−xFe2O4 (x = 0, 0,5, 1), NiFe2O4, ZnFe2O4, i Ni0,5Zn0,5Fe2O4 pripremljeni su in situ metodom termalne dekompozicije. U sintezi su korišćeni acetilacetonatni kompleksi kao prekursori. Dobijeni prahovi su komprimovani u tablete i sinterovani na 1150 °C i 1300 °C. Za detaljno ispitivanje faznog sastava i morfologije sintetisanih kompozita korišćene su metode rendgenske difrakcije praha (XRPD) i skenirajuće elektronske mikroskopije (SEM) spregnute sa energetsko disperzivnom spektroskopijom (EDS). Ispitivana su i magnetna, dielektrična i feroelektrična svojstva sinterovanih kompozita. Ustanovljeno je da optimalni fazni sastav pronađen kod kompozita BaTiO3/NiFe2O4 sinterovanog na 1150 °C dovodi do stabilnosti u širokom opsegu frekvencija. Optimalni fazni sastav pomenutog kompozita povoljno je uticao na funkcionalna svojstva kao što su niska provodnost i feroe...lektrično ponašenje koje se ogleda u zadovoljavajućem izgledu histerezisa [1]. Ova svojstva nedvosmisleno ukazuju da je kompozit BaTiO3/NiFe2O4 odgovarajući izbor za dalja istraživanja posvećena primeni multiferoičnih materijala.
Извор:
28th Conference of the Serbian Crystallographic Society - Abstracts, June 14–15th, 2023 Čačak, Serbia / XXVIII Konferencija Srpskog kristalografskog društva - Izvodi radova, Jun 14–15, 2023 Čačak, Srbija, 2023, 36-37Издавач:
- Belgrade, Serbia : Serbian Cristallographic Soceity / Beograd, Srbija : Srpsko kristalografsko društvo
Институција/група
IHTMTY - CONF AU - Šuljagić, Marija AU - Petronijević, Ivan AU - Mirković, Miljana AU - Kremenović, Aleksandar AU - Džunuzović, Adis AU - Pavlović, Vladimir AU - Kalezić-Glišović, Aleksandra AU - Anđelković, Ljubica PY - 2023 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/6328 AB - In order to examine the influence of phase composition and sintering temperature on the functional properties of perovskite/spinel composites, BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface. Acetylacetonate complexes were used as the precursors. The obtained powders were compressed to pellets and sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the comprehensive investigation of phase composition and morphology. The magnetic, dielectric, and ferroelectric properties were performed in detail. The optimal phase composition was found in the BaTiO3/NiFe2O4 composite sintered at 1150 °C, which resulted in a wide frequency range stability. Furthermore, particular phase composition led to suitable properties such as low conductivity and ideal-like hysteresis loop behavior [1]. These functional properties of BaTiO3/NiFe2O4 make this composite a “material of choice“ for further studies on applications of multiferroic devices. AB - U cilju ispitivanja uticaja faznog sastava i temperature sinterovanja na funkcionalna svojstva perovskit/spinel kompozita BaTiO3/NixZn1−xFe2O4 (x = 0, 0,5, 1), NiFe2O4, ZnFe2O4, i Ni0,5Zn0,5Fe2O4 pripremljeni su in situ metodom termalne dekompozicije. U sintezi su korišćeni acetilacetonatni kompleksi kao prekursori. Dobijeni prahovi su komprimovani u tablete i sinterovani na 1150 °C i 1300 °C. Za detaljno ispitivanje faznog sastava i morfologije sintetisanih kompozita korišćene su metode rendgenske difrakcije praha (XRPD) i skenirajuće elektronske mikroskopije (SEM) spregnute sa energetsko disperzivnom spektroskopijom (EDS). Ispitivana su i magnetna, dielektrična i feroelektrična svojstva sinterovanih kompozita. Ustanovljeno je da optimalni fazni sastav pronađen kod kompozita BaTiO3/NiFe2O4 sinterovanog na 1150 °C dovodi do stabilnosti u širokom opsegu frekvencija. Optimalni fazni sastav pomenutog kompozita povoljno je uticao na funkcionalna svojstva kao što su niska provodnost i feroelektrično ponašenje koje se ogleda u zadovoljavajućem izgledu histerezisa [1]. Ova svojstva nedvosmisleno ukazuju da je kompozit BaTiO3/NiFe2O4 odgovarajući izbor za dalja istraživanja posvećena primeni multiferoičnih materijala. PB - Belgrade, Serbia : Serbian Cristallographic Soceity / Beograd, Srbija : Srpsko kristalografsko društvo C3 - 28th Conference of the Serbian Crystallographic Society - Abstracts, June 14–15th, 2023 Čačak, Serbia / XXVIII Konferencija Srpskog kristalografskog društva - Izvodi radova, Jun 14–15, 2023 Čačak, Srbija T1 - BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) composites synthesized by thermal decomposition: The influence of phase composition and sintering temperature on their physical properties T1 - Uticaj faznog sastava i temperature sinterovanja na fizička svojstva BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) kompozita sintetisanih metodom termalne dekompozicije SP - 36 EP - 37 UR - https://hdl.handle.net/21.15107/rcub_cer_6328 ER -
@conference{ author = "Šuljagić, Marija and Petronijević, Ivan and Mirković, Miljana and Kremenović, Aleksandar and Džunuzović, Adis and Pavlović, Vladimir and Kalezić-Glišović, Aleksandra and Anđelković, Ljubica", year = "2023", abstract = "In order to examine the influence of phase composition and sintering temperature on the functional properties of perovskite/spinel composites, BaTiO3/NixZn1−xFe2O4 (x = 0, 0.5, 1), NiFe2O4, ZnFe2O4, and Ni0.5Zn0.5Fe2O4 were in situ prepared by thermal decomposition onto BaTiO3 surface. Acetylacetonate complexes were used as the precursors. The obtained powders were compressed to pellets and sintered at 1150 °C and 1300 °C. X-ray powder diffraction (XRPD) and scanning electron microscopy (SEM) coupled with electron dispersive spectroscopy (EDS) were used for the comprehensive investigation of phase composition and morphology. The magnetic, dielectric, and ferroelectric properties were performed in detail. The optimal phase composition was found in the BaTiO3/NiFe2O4 composite sintered at 1150 °C, which resulted in a wide frequency range stability. Furthermore, particular phase composition led to suitable properties such as low conductivity and ideal-like hysteresis loop behavior [1]. These functional properties of BaTiO3/NiFe2O4 make this composite a “material of choice“ for further studies on applications of multiferroic devices., U cilju ispitivanja uticaja faznog sastava i temperature sinterovanja na funkcionalna svojstva perovskit/spinel kompozita BaTiO3/NixZn1−xFe2O4 (x = 0, 0,5, 1), NiFe2O4, ZnFe2O4, i Ni0,5Zn0,5Fe2O4 pripremljeni su in situ metodom termalne dekompozicije. U sintezi su korišćeni acetilacetonatni kompleksi kao prekursori. Dobijeni prahovi su komprimovani u tablete i sinterovani na 1150 °C i 1300 °C. Za detaljno ispitivanje faznog sastava i morfologije sintetisanih kompozita korišćene su metode rendgenske difrakcije praha (XRPD) i skenirajuće elektronske mikroskopije (SEM) spregnute sa energetsko disperzivnom spektroskopijom (EDS). Ispitivana su i magnetna, dielektrična i feroelektrična svojstva sinterovanih kompozita. Ustanovljeno je da optimalni fazni sastav pronađen kod kompozita BaTiO3/NiFe2O4 sinterovanog na 1150 °C dovodi do stabilnosti u širokom opsegu frekvencija. Optimalni fazni sastav pomenutog kompozita povoljno je uticao na funkcionalna svojstva kao što su niska provodnost i feroelektrično ponašenje koje se ogleda u zadovoljavajućem izgledu histerezisa [1]. Ova svojstva nedvosmisleno ukazuju da je kompozit BaTiO3/NiFe2O4 odgovarajući izbor za dalja istraživanja posvećena primeni multiferoičnih materijala.", publisher = "Belgrade, Serbia : Serbian Cristallographic Soceity / Beograd, Srbija : Srpsko kristalografsko društvo", journal = "28th Conference of the Serbian Crystallographic Society - Abstracts, June 14–15th, 2023 Čačak, Serbia / XXVIII Konferencija Srpskog kristalografskog društva - Izvodi radova, Jun 14–15, 2023 Čačak, Srbija", title = "BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) composites synthesized by thermal decomposition: The influence of phase composition and sintering temperature on their physical properties, Uticaj faznog sastava i temperature sinterovanja na fizička svojstva BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) kompozita sintetisanih metodom termalne dekompozicije", pages = "36-37", url = "https://hdl.handle.net/21.15107/rcub_cer_6328" }
Šuljagić, M., Petronijević, I., Mirković, M., Kremenović, A., Džunuzović, A., Pavlović, V., Kalezić-Glišović, A.,& Anđelković, L.. (2023). BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) composites synthesized by thermal decomposition: The influence of phase composition and sintering temperature on their physical properties. in 28th Conference of the Serbian Crystallographic Society - Abstracts, June 14–15th, 2023 Čačak, Serbia / XXVIII Konferencija Srpskog kristalografskog društva - Izvodi radova, Jun 14–15, 2023 Čačak, Srbija Belgrade, Serbia : Serbian Cristallographic Soceity / Beograd, Srbija : Srpsko kristalografsko društvo., 36-37. https://hdl.handle.net/21.15107/rcub_cer_6328
Šuljagić M, Petronijević I, Mirković M, Kremenović A, Džunuzović A, Pavlović V, Kalezić-Glišović A, Anđelković L. BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) composites synthesized by thermal decomposition: The influence of phase composition and sintering temperature on their physical properties. in 28th Conference of the Serbian Crystallographic Society - Abstracts, June 14–15th, 2023 Čačak, Serbia / XXVIII Konferencija Srpskog kristalografskog društva - Izvodi radova, Jun 14–15, 2023 Čačak, Srbija. 2023;:36-37. https://hdl.handle.net/21.15107/rcub_cer_6328 .
Šuljagić, Marija, Petronijević, Ivan, Mirković, Miljana, Kremenović, Aleksandar, Džunuzović, Adis, Pavlović, Vladimir, Kalezić-Glišović, Aleksandra, Anđelković, Ljubica, "BaTiO3/NixZn1-xFe2O4 (x =0, 0.5, 1) composites synthesized by thermal decomposition: The influence of phase composition and sintering temperature on their physical properties" in 28th Conference of the Serbian Crystallographic Society - Abstracts, June 14–15th, 2023 Čačak, Serbia / XXVIII Konferencija Srpskog kristalografskog društva - Izvodi radova, Jun 14–15, 2023 Čačak, Srbija (2023):36-37, https://hdl.handle.net/21.15107/rcub_cer_6328 .