CO2 looping cycles with CaO-based sorbent pretreated in CO2 at high temperature
Само за регистроване кориснике
2009
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
In this study, pretreatment of CaO-based sorbent in a CO2 atmosphere at high temperature is investigated for its effect on CO2 capture. Three limestones from three widely different geographical locations are used for the tests: Kelly Rock (Canada), La Blanca (Spain), and Katowice (Poland). The particle sizes used are typically as employed in fluidized bed conversion systems. Pretreatment was done in a tube furnace at different temperatures and for different durations. The pretreated samples are characterized by nitrogen physisorption tests, scanning electron microscopy (SEM), and carbonation/calcination conversion measurements in a thermogravimetric analyzer (TGA). The results obtained showed significant decrease of sorbent surface area after pretreatment and the presence of smooth CaO grains was typical of the sorbent particle surface morphology. The pore surface area of pretreated sorbent samples increased after CO2 cycling, with a peak in pore volume distributions at 50 nm, and SEM ...images showed the reappearance of smaller CaO grains. In the case of Kelly Rock and Katowice samples, this led to an increase in CO2 capture activity, up to 45% after 20 cycles. After that, conversions decreased but still remained 5-10% above those for the original (no pretreatment) samples. This beneficial effect means that particles of larger size, typical of fluidized bed combustion (FBC) systems, can be suitably pretreated for use in longer series of CO2 capture cycles. An additional expected advantage of pretreating sorbent in this manner is reduced elutriation at any given FBC condition. Attempts to pretreat La Blanca failed, as they did when using N2, and it is believed that this is explained by the high Na content of this limestone. Crown Copyright
Кључне речи:
Ca looping cycles / CO2 capture / FBC / Lime based sorbents / Sintering / Thermal pretreatmentИзвор:
Chemical Engineering Science, 2009, 64, 14, 3236-3245
DOI: 10.1016/j.ces.2009.03.051
ISSN: 0009-2509
WoS: 000271298400004
Scopus: 2-s2.0-67349163288
Институција/група
IHTMTY - JOUR AU - Manovic, V. AU - Anthony, E.J. AU - Lončarević, Davor PY - 2009 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/572 AB - In this study, pretreatment of CaO-based sorbent in a CO2 atmosphere at high temperature is investigated for its effect on CO2 capture. Three limestones from three widely different geographical locations are used for the tests: Kelly Rock (Canada), La Blanca (Spain), and Katowice (Poland). The particle sizes used are typically as employed in fluidized bed conversion systems. Pretreatment was done in a tube furnace at different temperatures and for different durations. The pretreated samples are characterized by nitrogen physisorption tests, scanning electron microscopy (SEM), and carbonation/calcination conversion measurements in a thermogravimetric analyzer (TGA). The results obtained showed significant decrease of sorbent surface area after pretreatment and the presence of smooth CaO grains was typical of the sorbent particle surface morphology. The pore surface area of pretreated sorbent samples increased after CO2 cycling, with a peak in pore volume distributions at 50 nm, and SEM images showed the reappearance of smaller CaO grains. In the case of Kelly Rock and Katowice samples, this led to an increase in CO2 capture activity, up to 45% after 20 cycles. After that, conversions decreased but still remained 5-10% above those for the original (no pretreatment) samples. This beneficial effect means that particles of larger size, typical of fluidized bed combustion (FBC) systems, can be suitably pretreated for use in longer series of CO2 capture cycles. An additional expected advantage of pretreating sorbent in this manner is reduced elutriation at any given FBC condition. Attempts to pretreat La Blanca failed, as they did when using N2, and it is believed that this is explained by the high Na content of this limestone. Crown Copyright T2 - Chemical Engineering Science T1 - CO2 looping cycles with CaO-based sorbent pretreated in CO2 at high temperature VL - 64 IS - 14 SP - 3236 EP - 3245 DO - 10.1016/j.ces.2009.03.051 ER -
@article{ author = "Manovic, V. and Anthony, E.J. and Lončarević, Davor", year = "2009", abstract = "In this study, pretreatment of CaO-based sorbent in a CO2 atmosphere at high temperature is investigated for its effect on CO2 capture. Three limestones from three widely different geographical locations are used for the tests: Kelly Rock (Canada), La Blanca (Spain), and Katowice (Poland). The particle sizes used are typically as employed in fluidized bed conversion systems. Pretreatment was done in a tube furnace at different temperatures and for different durations. The pretreated samples are characterized by nitrogen physisorption tests, scanning electron microscopy (SEM), and carbonation/calcination conversion measurements in a thermogravimetric analyzer (TGA). The results obtained showed significant decrease of sorbent surface area after pretreatment and the presence of smooth CaO grains was typical of the sorbent particle surface morphology. The pore surface area of pretreated sorbent samples increased after CO2 cycling, with a peak in pore volume distributions at 50 nm, and SEM images showed the reappearance of smaller CaO grains. In the case of Kelly Rock and Katowice samples, this led to an increase in CO2 capture activity, up to 45% after 20 cycles. After that, conversions decreased but still remained 5-10% above those for the original (no pretreatment) samples. This beneficial effect means that particles of larger size, typical of fluidized bed combustion (FBC) systems, can be suitably pretreated for use in longer series of CO2 capture cycles. An additional expected advantage of pretreating sorbent in this manner is reduced elutriation at any given FBC condition. Attempts to pretreat La Blanca failed, as they did when using N2, and it is believed that this is explained by the high Na content of this limestone. Crown Copyright", journal = "Chemical Engineering Science", title = "CO2 looping cycles with CaO-based sorbent pretreated in CO2 at high temperature", volume = "64", number = "14", pages = "3236-3245", doi = "10.1016/j.ces.2009.03.051" }
Manovic, V., Anthony, E.J.,& Lončarević, D.. (2009). CO2 looping cycles with CaO-based sorbent pretreated in CO2 at high temperature. in Chemical Engineering Science, 64(14), 3236-3245. https://doi.org/10.1016/j.ces.2009.03.051
Manovic V, Anthony E, Lončarević D. CO2 looping cycles with CaO-based sorbent pretreated in CO2 at high temperature. in Chemical Engineering Science. 2009;64(14):3236-3245. doi:10.1016/j.ces.2009.03.051 .
Manovic, V., Anthony, E.J., Lončarević, Davor, "CO2 looping cycles with CaO-based sorbent pretreated in CO2 at high temperature" in Chemical Engineering Science, 64, no. 14 (2009):3236-3245, https://doi.org/10.1016/j.ces.2009.03.051 . .