Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy
Članak u časopisu (Recenzirana verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results.
Ključne reči:
annealing temperature / corrosion / Microstructural characterization / Potentiodynamic measurementsIzvor:
Materials and Corrosion-Werkstoffe Und Korrosion, 2016, 67, 8, 867-875Izdavač:
- Wiley
Finansiranje / projekti:
- Ministry of Education, Science and Technological Development, Republic of Serbia
- Razvoj tehnologije proizvodnje i zavarivanja Al-Mg legura visoke čvrstoće za primenu u konstrukcijama drumskih i železničkih transportnih sredstava (RS-34018)
- Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy - DE-AC02-05CH11231
Napomena:
- This is the peer reviewed version of the following article: Radetić T, Popović M, Jegdić B, Romhanji E. Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy. Materials and Corrosion-Werkstoffe Und Korrosion. 2016;67(8):867-875, which has been published in final form at https://doi.org/10.1002/maco.201508709 This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions."
- The published version: https://cer.ihtm.bg.ac.rs/handle/123456789/1919
Povezane informacije:
- Druga verzija
https://cer.ihtm.bg.ac.rs/handle/123456789/1919
DOI: 10.1002/maco.201508709
ISSN: 0947-5117
WoS: 000383643000009
Scopus: 2-s2.0-84956862974
Institucija/grupa
IHTMTY - JOUR AU - Radetić, Tamara AU - Popović, M. AU - Jegdić, Bore AU - Romhanji, E. PY - 2016 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/4382 AB - Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results. PB - Wiley T2 - Materials and Corrosion-Werkstoffe Und Korrosion T1 - Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy VL - 67 IS - 8 SP - 867 EP - 875 DO - 10.1002/maco.201508709 ER -
@article{ author = "Radetić, Tamara and Popović, M. and Jegdić, Bore and Romhanji, E.", year = "2016", abstract = "Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results.", publisher = "Wiley", journal = "Materials and Corrosion-Werkstoffe Und Korrosion", title = "Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy", volume = "67", number = "8", pages = "867-875", doi = "10.1002/maco.201508709" }
Radetić, T., Popović, M., Jegdić, B.,& Romhanji, E.. (2016). Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy. in Materials and Corrosion-Werkstoffe Und Korrosion Wiley., 67(8), 867-875. https://doi.org/10.1002/maco.201508709
Radetić T, Popović M, Jegdić B, Romhanji E. Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy. in Materials and Corrosion-Werkstoffe Und Korrosion. 2016;67(8):867-875. doi:10.1002/maco.201508709 .
Radetić, Tamara, Popović, M., Jegdić, Bore, Romhanji, E., "Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy" in Materials and Corrosion-Werkstoffe Und Korrosion, 67, no. 8 (2016):867-875, https://doi.org/10.1002/maco.201508709 . .