Приказ основних података о документу
Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy
dc.creator | Radetić, Tamara | |
dc.creator | Popović, M. | |
dc.creator | Jegdić, Bore | |
dc.creator | Romhanji, E. | |
dc.date.accessioned | 2021-03-23T07:49:25Z | |
dc.date.available | 2017-01-22 | |
dc.date.issued | 2016 | |
dc.identifier.issn | 0947-5117 | |
dc.identifier.uri | https://cer.ihtm.bg.ac.rs/handle/123456789/4382 | |
dc.description.abstract | Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results. | en |
dc.publisher | Wiley | |
dc.relation | Ministry of Education, Science and Technological Development, Republic of Serbia | |
dc.relation | info:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/34018/RS// | |
dc.relation | Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy - DE-AC02-05CH11231 | |
dc.relation.isversionof | https://cer.ihtm.bg.ac.rs/handle/123456789/1919 | |
dc.rights | embargoedAccess | |
dc.rights.uri | https://creativecommons.org/licenses/by-nc-nd/4.0/ | |
dc.source | Materials and Corrosion-Werkstoffe Und Korrosion | |
dc.subject | annealing temperature | |
dc.subject | corrosion | |
dc.subject | Microstructural characterization | |
dc.subject | Potentiodynamic measurements | |
dc.title | Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy | en |
dc.type | article | |
dc.rights.license | BY-NC-ND | |
dcterms.abstract | Ромхањи, Е.; Радетић, Тамара; Јегдић, Боре; Поповић, М.; | |
dc.citation.volume | 67 | |
dc.citation.issue | 8 | |
dc.citation.spage | 867 | |
dc.citation.epage | 875 | |
dc.citation.other | 67(8): 867-875 | |
dc.citation.rank | M22 | |
dc.description.other | This is the peer reviewed version of the following article: Radetić T, Popović M, Jegdić B, Romhanji E. Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy. Materials and Corrosion-Werkstoffe Und Korrosion. 2016;67(8):867-875, which has been published in final form at [https://doi.org/10.1002/maco.201508709] This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions." | |
dc.description.other | The published version: [https://cer.ihtm.bg.ac.rs/handle/123456789/1919] | |
dc.identifier.doi | 10.1002/maco.201508709 | |
dc.identifier.fulltext | https://cer.ihtm.bg.ac.rs/bitstream/id/19629/1919acc.pdf | |
dc.identifier.scopus | 2-s2.0-84956862974 | |
dc.identifier.wos | 000383643000009 | |
dc.type.version | acceptedVersion |