Pretraživanje
Prikaz rezultata 1-10 od 81
Morphology of Ni-Mo-O alloy powders electrodeposited from ammonium sulfate solutions / Morfologija prahova Ni-Mo-O legura istaloženih elektrohemijskim postupkom iz rastvora amonijum sulfata
(Belgrade, Serbia : Engineering Society for Corrosion, 2008)
The electro deposition of the Ni-Mo-O alloy powders from ammonium sulfate containing electrolytes of different Ni/Mo ions concentration ratios was investigated by the polarization measurements. In all electrolytes similar ...
Influence of welding current intensity on pitting corrosion resistance in welded joint of stainless steel X5CrNi18-10 / Uticaj jačine struje zavarivanja na otpornost prema piting koroziji zavarenog spoja nerđajućeg čelika X5CrNi18-10
(Belgrade, Serbia : Engineering Society for Corrosion, 2017)
The effect of welding current on the pitting corrosion resistance in the welded joint of austenitic stainless steel X5CrNi18-10 was tested. Welding was carried out using three different current intensity (110 A, 130 A and ...
The effect of preparation of aluminum surface on surface roughness / Uticaj pripreme površine aluminijuma na površinsku hrapavost
(Belgrade, Serbia : Engineering Society for Corrosion, 2004)
Aluminum samples were electrochemically polished in one of three solutions for electrochemical polishing. On those samples the surface roughness was measured. The effect of the anode treatment on surface roughness was also ...
The effect of preparation of aluminum surface on the structure of final coating of nickel / Uticaj pripreme površine aluminijuma na strukturu završne prevlake nikla
(Belgrade, Serbia : Engineering Society for Corrosion, 2003)
In this work structure characteristics of the final coating of nickel were studied. Nickel was deposited onto chemically prepared aluminum, chemically and electrochemically. Structural characteristics of metallic coatings ...
Correlation between crystal orientation and morphology of electrolytically produced powder particles: Analysis of the limiting cases / Korelacija izmedju orijentacije kristala i morfologije elektrolitički proizvedenih praškastih čestica - analiza graničnih slučajeva
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
Lead and nickel powder particles were produced by the processes of electrolysis and characterized by scanning electron microscope (SEM). The X-ray diffraction (XRD) analysis of the produced particles was done. Morphologies ...
Properties of Ni-W alloys electrochemically deposited by direct and pulse current / Karakteristike legura Ni-W elektrohemijski taloženih konstantnom i pulsirajućom strujom
(Belgrade, Serbia : Engineering Society for Corrosion, 2005)
The Ni-W alloys were electrochemically deposited from a ammonia-citrate electrolyte on rotation disc electrode with a replaceable steel disc, by direct and pulsed current. The aim of the paper is investigations of parameters ...
Formation and growth of pits on X5CrNi18-10 austenitic stainless steel in presence of chlorides and sulphates / Formiranje i rast pitova na austenitnom nerđajućem čeliku X5CrNi18-10 u prisustvu hlorida i sulfata
(Belgrade, Serbia : Engineering Society for Corrosion, 2018)
The resistance of X5CrNi18-10 stainless steel to pitting corrosion in a solution containing chlorides and sulphates was tested using the potentiodynamic polarization method. The obtained results show that the stainless ...
The electrochemical deposition and corrosion stability of Zn-Mn alloy coatings / Elektrohemijsko taloženje i koroziona stabilnost prevlaka Zn-Mn legura
(Belgrade, Serbia : Engineering Society for Corrosion, 2010)
The influence of the type of the deposition solution on the current efficiency during electrodeposition of Zn-Mn alloys was examined. The Zn-Mn alloys were deposited on steel from chloride, sulphate and pyrophosphate plating ...
Polymer bonded magnetic composites based on Nd-Fe-B / Polimerni magnetni kompoziti na bazi Nd-Fe-B
(Belgrade, Serbia : Engineering Society for Corrosion, 2013)
Various types and contents of magnetic powder and polymer matrix induce different mechanical, magnetic, electrical and optical properties of final composite material. The strong influence of relatively small amounts of ...
The effect of filler morphology on thermal characteristics of lignocellulose and metal powders composites / Uticaj morfologije punioca na termijske karakteristike kompozita lignoceluloze punjene metalnim prahovima
(Belgrade, Serbia : Engineering Society for Corrosion, 2015)
In this manuscript the results of experimental studies of the properties of composite materials based on lignocellulosic matrix (LC) filled with electrolytic copper powder and chemically obtained silver powder are presented. ...