Претраживање
Приказ резултата 1-10 од 16
Characterization of carbon fibrous material from platanus achenes as platinum catalysts support
(Serbia : Association of Metallurgical Engineers of Serbia, 2020)
Carbon materials with developed porosity are usually used as supports for platinum catalysts. Physico-chemical characteristics of the support influence the properties of platinum deposited and its catalytic activity. In ...
Thermal and microstructural analysis of the low-melting Bi-In-Pb alloy
(Association of Metallurgical Engineers of Serbia (AMES), 2020)
Low-melting alloys, based on bismuth and indium, have found commercial use in soldering, safety devices, coatings, and bonding applications. In this respect, the accurate knowledge of their thermal properties such ...
Thermal and microstructural analysis of the low-melting Bi-In-Pb alloy
(Serbia : Association of Metallurgical Engineers of Serbia, 2020)
Low-melting alloys, based on bismuth and indium, have found commercial use in soldering, safety devices, coatings, and bonding applications. In this respect, the accurate knowledge of their thermal properties such as melting ...
Numerical simulation of fluid-structure interaction between fishing wobbler and water
(Niš, Serbia : University of Niš, 2020)
This paper deals with modeling, discretization, and numerical analysis of the two-way fluid-structure interaction between a fishing wobbler and a water stream. The structural domain is an assembly of several bodies that ...
Thermal characterization of the In–Sn–Zn eutectic alloy
(Belgrade : Association of Metallurgical Engineers of Serbia, 2020)
Thermal properties, including melting temperature, latent heat of melting, specific heat capacity and thermal conductivity, of a low-melting In–Sn–Zn eutectic alloy were investigated in this work. The In–Sn–Zn eutectic ...
Corrosion characteristics of laser-cleaned surfaces on iron artefact / Koroziona svojstva laserski čišćenih površina na artefaktu od gvožđa
(Belgrade : Engineering Society for Corrosion, 2020)
Nd:YAG laser was used for cleaning surfaces of cultural heritage iron artefacts covered with
corrosion products. The corrosion products were removed without damaging the base material.
Three different electrochemical ...
Mercury pollution of sediments from the river Tisa (Serbia)
(Novi sad : Matica srpska, 2020)
Mercury (Hg) has been listed as a global high priority pollutant by many international organizations due to its mobility and persistence in the environments and high toxicity to organisms. This research was conducted with ...
Chemical composition of hyssop cv. 'Domaći ljubičasti' essential oil and its antimicrobial activity / Hemijski sastav etarskog ulja miloduha kultivara 'Domaći ljubičasti' i ocena antimikrobne aktivnosti
(Belgrade : Centre for Evaluation in Education and Science, 2021)
Hyssop (Hyssopus officinalis L., Lamiaceae) is a perennial shrub or subshrub violet-blue flowers in verticillasters and spicy taste with a pungent flavour. Besides being used as a culinary herb for flavouring and food ...
Thermal transport properties and microstructure of the solid Bi-Cu alloys
(Belgrade : Association of Metallurgical Engineers of Serbia ( AMES ), 2022)
Thermal transport properties of solid Bi-Cu alloys have been investigated over a wide composition range and temperature range ranging from 25 to 250 °C. The flash method was used to determine thermal diffusivity. Thermal ...
The manufacturing technology of 3D printed models on various materials using the fused deposition modeling process / Tehnologija proizvodnje 3d štampanih modela na različitim materijalima korišćenjem procesa fuzionog taloženja materijala
(University of Niš, Faculty of Technology Leskovac, 2023)
The joining of thermoplastic and textile materials is gaining more and more importance
today. New combinations of materials and new structures that change
fashion trends are obtained. The paper presents the technology ...