Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy
Само за регистроване кориснике
2016
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results.
Кључне речи:
annealing temperature / corrosion / Microstructural characterization / Potentiodynamic measurementsИзвор:
Materials and Corrosion-Werkstoffe Und Korrosion, 2016, 67, 8, 867-875Издавач:
- Wiley
Финансирање / пројекти:
- Ministry of Education, Science and Technological Development, Republic of Serbia
- Развој технологије производње и заваривања Ал-Мг легура високе чврстоће за примену у конструкцијама друмских и железничких транспортних средстава (RS-34018)
- Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy - DE-AC02-05CH11231
Напомена:
- The published version: https://cer.ihtm.bg.ac.rs/handle/123456789/4382
Повезане информације:
- Друга верзија
https://cer.ihtm.bg.ac.rs/handle/123456789/4382
DOI: 10.1002/maco.201508709
ISSN: 0947-5117
WoS: 000383643000009
Scopus: 2-s2.0-84956862974
Институција/група
IHTMTY - JOUR AU - Radetić, Tamara AU - Popović, M. AU - Jegdić, Bore AU - Romhanji, E. PY - 2016 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/1919 AB - Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results. PB - Wiley T2 - Materials and Corrosion-Werkstoffe Und Korrosion T1 - Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy VL - 67 IS - 8 SP - 867 EP - 875 DO - 10.1002/maco.201508709 ER -
@article{ author = "Radetić, Tamara and Popović, M. and Jegdić, Bore and Romhanji, E.", year = "2016", abstract = "Influence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results.", publisher = "Wiley", journal = "Materials and Corrosion-Werkstoffe Und Korrosion", title = "Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy", volume = "67", number = "8", pages = "867-875", doi = "10.1002/maco.201508709" }
Radetić, T., Popović, M., Jegdić, B.,& Romhanji, E.. (2016). Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy. in Materials and Corrosion-Werkstoffe Und Korrosion Wiley., 67(8), 867-875. https://doi.org/10.1002/maco.201508709
Radetić T, Popović M, Jegdić B, Romhanji E. Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy. in Materials and Corrosion-Werkstoffe Und Korrosion. 2016;67(8):867-875. doi:10.1002/maco.201508709 .
Radetić, Tamara, Popović, M., Jegdić, Bore, Romhanji, E., "Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy" in Materials and Corrosion-Werkstoffe Und Korrosion, 67, no. 8 (2016):867-875, https://doi.org/10.1002/maco.201508709 . .