Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution
Samo za registrovane korisnike
2011
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Wear and corrosion behaviour of cold-rolled Ti-13Nb-13Zr alloy, with martensitic microstructure, and Ti-6Al-4V ELI alloy, in martensitic and two-phase (alpha + beta) microstructural conditions, was studied in a Ringer's solution. The wear experiments were performed at room temperature with a normal load of 40 N and sliding speeds 0.26. 0.5 and 1.0 m/s. The corrosion behaviour was studied at 37 degrees C using open circuit potential-time measurements and potentiodynamic polarization. It was found that Ti-13Nb-13Zr alloy has a substantially lower wear resistance than Ti-6Al-4V ELI alloy in both microstructural conditions. Surface damage extent increases with sliding speed increase and is always smallest for martensitic Ti-6Al-4V ELI alloy with highest hardness. Both alloys exhibit spontaneous passivity in Ringer's solution. Corrosion potential values are similar for all three materials. However, Ti-13Nb-13Zr and martensitic Ti-6Al-4V ELI alloys show improved corrosion resistance comparat...ively to Ti-6Al-4V ELI alloy with (alpha + beta) microstructure. Martensitic Ti-6Al-4V ELI alloy possesses the best combination of both corrosion and wear resistance, although its corrosion resistance is found to be slightly higher than that of the Ti-13Nb-13Zr alloy.
Ključne reči:
Ti orthopaedic alloys / Ringer's solution / Microstructures / Wear rate / Corrosion resistanceIzvor:
Corrosion Science, 2011, 53, 2, 796-808Izdavač:
- Oxford : Pergamon-Elsevier Science Ltd
Finansiranje / projekti:
- Specijalne teme mehanike loma materijala (RS-MESTD-MPN2006-2010-144027)
- Mikromehanički kriterijumi oštećenja i loma (RS-MESTD-Basic Research (BR or ON)-174004)
DOI: 10.1016/j.corsci.2010.11.014
ISSN: 0010-938X
WoS: 000287004700033
Scopus: 2-s2.0-78650240099
Institucija/grupa
IHTMTY - JOUR AU - Cvijovic-Alagic, I. AU - Cvijovic, Z. AU - Mitrovic, S. AU - Panić, Vladimir AU - Rakin, M. PY - 2011 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/908 AB - Wear and corrosion behaviour of cold-rolled Ti-13Nb-13Zr alloy, with martensitic microstructure, and Ti-6Al-4V ELI alloy, in martensitic and two-phase (alpha + beta) microstructural conditions, was studied in a Ringer's solution. The wear experiments were performed at room temperature with a normal load of 40 N and sliding speeds 0.26. 0.5 and 1.0 m/s. The corrosion behaviour was studied at 37 degrees C using open circuit potential-time measurements and potentiodynamic polarization. It was found that Ti-13Nb-13Zr alloy has a substantially lower wear resistance than Ti-6Al-4V ELI alloy in both microstructural conditions. Surface damage extent increases with sliding speed increase and is always smallest for martensitic Ti-6Al-4V ELI alloy with highest hardness. Both alloys exhibit spontaneous passivity in Ringer's solution. Corrosion potential values are similar for all three materials. However, Ti-13Nb-13Zr and martensitic Ti-6Al-4V ELI alloys show improved corrosion resistance comparatively to Ti-6Al-4V ELI alloy with (alpha + beta) microstructure. Martensitic Ti-6Al-4V ELI alloy possesses the best combination of both corrosion and wear resistance, although its corrosion resistance is found to be slightly higher than that of the Ti-13Nb-13Zr alloy. PB - Oxford : Pergamon-Elsevier Science Ltd T2 - Corrosion Science T1 - Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution VL - 53 IS - 2 SP - 796 EP - 808 DO - 10.1016/j.corsci.2010.11.014 ER -
@article{ author = "Cvijovic-Alagic, I. and Cvijovic, Z. and Mitrovic, S. and Panić, Vladimir and Rakin, M.", year = "2011", abstract = "Wear and corrosion behaviour of cold-rolled Ti-13Nb-13Zr alloy, with martensitic microstructure, and Ti-6Al-4V ELI alloy, in martensitic and two-phase (alpha + beta) microstructural conditions, was studied in a Ringer's solution. The wear experiments were performed at room temperature with a normal load of 40 N and sliding speeds 0.26. 0.5 and 1.0 m/s. The corrosion behaviour was studied at 37 degrees C using open circuit potential-time measurements and potentiodynamic polarization. It was found that Ti-13Nb-13Zr alloy has a substantially lower wear resistance than Ti-6Al-4V ELI alloy in both microstructural conditions. Surface damage extent increases with sliding speed increase and is always smallest for martensitic Ti-6Al-4V ELI alloy with highest hardness. Both alloys exhibit spontaneous passivity in Ringer's solution. Corrosion potential values are similar for all three materials. However, Ti-13Nb-13Zr and martensitic Ti-6Al-4V ELI alloys show improved corrosion resistance comparatively to Ti-6Al-4V ELI alloy with (alpha + beta) microstructure. Martensitic Ti-6Al-4V ELI alloy possesses the best combination of both corrosion and wear resistance, although its corrosion resistance is found to be slightly higher than that of the Ti-13Nb-13Zr alloy.", publisher = "Oxford : Pergamon-Elsevier Science Ltd", journal = "Corrosion Science", title = "Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution", volume = "53", number = "2", pages = "796-808", doi = "10.1016/j.corsci.2010.11.014" }
Cvijovic-Alagic, I., Cvijovic, Z., Mitrovic, S., Panić, V.,& Rakin, M.. (2011). Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution. in Corrosion Science Oxford : Pergamon-Elsevier Science Ltd., 53(2), 796-808. https://doi.org/10.1016/j.corsci.2010.11.014
Cvijovic-Alagic I, Cvijovic Z, Mitrovic S, Panić V, Rakin M. Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution. in Corrosion Science. 2011;53(2):796-808. doi:10.1016/j.corsci.2010.11.014 .
Cvijovic-Alagic, I., Cvijovic, Z., Mitrovic, S., Panić, Vladimir, Rakin, M., "Wear and corrosion behaviour of Ti-13Nb-13Zr and Ti-6Al-4V alloys in simulated physiological solution" in Corrosion Science, 53, no. 2 (2011):796-808, https://doi.org/10.1016/j.corsci.2010.11.014 . .