CER - Centralni Repozitorijum IHTM-a
Institut za hemiju, tehnologiju i metalurgiju
    • English
    • Српски
    • Српски (Serbia)
  • Srpski (latinica) 
    • Engleski
    • Srpski (ćirilica)
    • Srpski (latinica)
  • Prijava
Pregled rada 
  •   CER - Repozitorijum Instituta za hemiju, tehnologiju i metalurgiju
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Pregled rada
  •   CER - Repozitorijum Instituta za hemiju, tehnologiju i metalurgiju
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Pregled rada
JavaScript is disabled for your browser. Some features of this site may not work without it.

Sorption of zinc by novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid

Samo za registrovane korisnike
2011
Autori
Milosavljevic, Nedeljko B.
Ristic, Mirjana D.
Peric-Grujic, Aleksandra A.
Filipovic, Jovanka M.
Štrbac, Svetlana
Rakočević, Zlatko Lj.
Kalagasidis Krušić, Melina
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentu
Apstrakt
Novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid were applied as adsorbents for the removal of Zn(2+) ions from aqueous solution. In batch tests, the influence of solution pH, contact time, initial metal ion concentration and temperature was examined. The sorption was found pH dependent, pH 5.5 being the optimum value. The adsorption process was well described by the pseudosecond order kinetic. The hydrogels were characterized by spectral (Fourier transform infrared-FTIR) and structural (SEM/EDX and atomic force microscopy-AFM) analyses. The surface topography changes were observed by atomic force microscopy, while the changes in surface composition were detected using phase imaging AFM. The negative values of free energy and enthalpy indicated that the adsorption is spontaneous and exothermic one. The best fitting isotherms were Langmuir and Redlich-Peterson and it was found that both linear and nonlinear methods were appropriate for obtaining the iso...therm parameters. However, the increase of temperature leads to higher adsorption capacity, since swelling degree increased with temperature.

Ključne reči:
Hydrogel / Kinetic model / Adsorption isotherm / Separation / Atomic force microscopy
Izvor:
Journal of Hazardous Materials, 2011, 192, 2, 846-854
Izdavač:
  • Elsevier Science Bv, Amsterdam
Projekti:
  • Sinteza i karakterizacija novih funkcionalnih polimera i polimernih nanokompozita (RS-172062)
  • Razvoj i primena metoda i materijala za monitoring novih zagađujućih i toksičnih organskih materija i teških metala (RS-172007)

DOI: 10.1016/j.jhazmat.2011.05.093

ISSN: 0304-3894

PubMed: 21703762

WoS: 000293314000055

Scopus: 2-s2.0-79960164022
[ Google Scholar ]
34
36
URI
http://cer.ihtm.bg.ac.rs/handle/123456789/805
Kolekcije
  • Radovi istraživača / Researchers' publications
Institucija
IHTM
TY  - JOUR
AU  - Milosavljevic, Nedeljko B.
AU  - Ristic, Mirjana D.
AU  - Peric-Grujic, Aleksandra A.
AU  - Filipovic, Jovanka M.
AU  - Štrbac, Svetlana
AU  - Rakočević, Zlatko Lj.
AU  - Kalagasidis Krušić, Melina
PY  - 2011
UR  - http://cer.ihtm.bg.ac.rs/handle/123456789/805
AB  - Novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid were applied as adsorbents for the removal of Zn(2+) ions from aqueous solution. In batch tests, the influence of solution pH, contact time, initial metal ion concentration and temperature was examined. The sorption was found pH dependent, pH 5.5 being the optimum value. The adsorption process was well described by the pseudosecond order kinetic. The hydrogels were characterized by spectral (Fourier transform infrared-FTIR) and structural (SEM/EDX and atomic force microscopy-AFM) analyses. The surface topography changes were observed by atomic force microscopy, while the changes in surface composition were detected using phase imaging AFM. The negative values of free energy and enthalpy indicated that the adsorption is spontaneous and exothermic one. The best fitting isotherms were Langmuir and Redlich-Peterson and it was found that both linear and nonlinear methods were appropriate for obtaining the isotherm parameters. However, the increase of temperature leads to higher adsorption capacity, since swelling degree increased with temperature.
PB  - Elsevier Science Bv, Amsterdam
T2  - Journal of Hazardous Materials
T1  - Sorption of zinc by novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid
VL  - 192
IS  - 2
SP  - 846
EP  - 854
DO  - 10.1016/j.jhazmat.2011.05.093
ER  - 
@article{
author = "Milosavljevic, Nedeljko B. and Ristic, Mirjana D. and Peric-Grujic, Aleksandra A. and Filipovic, Jovanka M. and Štrbac, Svetlana and Rakočević, Zlatko Lj. and Kalagasidis Krušić, Melina",
year = "2011",
url = "http://cer.ihtm.bg.ac.rs/handle/123456789/805",
abstract = "Novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid were applied as adsorbents for the removal of Zn(2+) ions from aqueous solution. In batch tests, the influence of solution pH, contact time, initial metal ion concentration and temperature was examined. The sorption was found pH dependent, pH 5.5 being the optimum value. The adsorption process was well described by the pseudosecond order kinetic. The hydrogels were characterized by spectral (Fourier transform infrared-FTIR) and structural (SEM/EDX and atomic force microscopy-AFM) analyses. The surface topography changes were observed by atomic force microscopy, while the changes in surface composition were detected using phase imaging AFM. The negative values of free energy and enthalpy indicated that the adsorption is spontaneous and exothermic one. The best fitting isotherms were Langmuir and Redlich-Peterson and it was found that both linear and nonlinear methods were appropriate for obtaining the isotherm parameters. However, the increase of temperature leads to higher adsorption capacity, since swelling degree increased with temperature.",
publisher = "Elsevier Science Bv, Amsterdam",
journal = "Journal of Hazardous Materials",
title = "Sorption of zinc by novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid",
volume = "192",
number = "2",
pages = "846-854",
doi = "10.1016/j.jhazmat.2011.05.093"
}
Milosavljevic NB, Ristic MD, Peric-Grujic AA, Filipovic JM, Štrbac S, Rakočević ZL, Kalagasidis Krušić M. Sorption of zinc by novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid. Journal of Hazardous Materials. 2011;192(2):846-854
Milosavljevic, N. B., Ristic, M. D., Peric-Grujic, A. A., Filipovic, J. M., Štrbac, S., Rakočević, Z. Lj.,& Kalagasidis Krušić, M. (2011). Sorption of zinc by novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid.
Journal of Hazardous MaterialsElsevier Science Bv, Amsterdam., 192(2), 846-854.
https://doi.org/10.1016/j.jhazmat.2011.05.093
Milosavljevic Nedeljko B., Ristic Mirjana D., Peric-Grujic Aleksandra A., Filipovic Jovanka M., Štrbac Svetlana, Rakočević Zlatko Lj., Kalagasidis Krušić Melina, "Sorption of zinc by novel pH-sensitive hydrogels based on chitosan, itaconic acid and methacrylic acid" 192, no. 2 (2011):846-854,
https://doi.org/10.1016/j.jhazmat.2011.05.093 .

DSpace software copyright © 2002-2015  DuraSpace
O Centralnom repozitorijumu (CeR) | Pošaljite zapažanja

OpenAIRERCUB
 

 

Kompletan repozitorijumInstitucijeAutoriNasloviTemeOva institucijaAutoriNasloviTeme

Statistika

Pregled statistika

DSpace software copyright © 2002-2015  DuraSpace
O Centralnom repozitorijumu (CeR) | Pošaljite zapažanja

OpenAIRERCUB