Prikaz osnovnih podataka o dokumentu

dc.creatorGrujić, Aleksandar
dc.creatorTalijan, Nadežda M.
dc.creatorStojanović, D.
dc.creatorStajić-Trošić, Jasna
dc.creatorBurzić, Z.
dc.creatorBalanović, Ljubiša
dc.creatorAleksić, Radoslav
dc.date.accessioned2019-01-30T17:24:37Z
dc.date.available2019-01-30T17:24:37Z
dc.date.issued2010
dc.identifier.issn1450-5339
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/734
dc.description.abstractMany of modern technologies require materials with unusual combinations of properties that cannot be met by the conventional metal alloys, ceramics, and polymeric materials. Material property combinations and ranges have been extended by the development of composite materials. Development of Nd-Fe-B/polymer composite magnetic materials has significantly increased interest in research and development of bonded magnets, since particles of Nd-Fe-B alloys are proved to be very suitable for their production. This study investigates the mechanical and magnetic properties of compression molded Nd-Fe-B magnets with different content of magnetic powder in epoxy matrix. Mechanical properties were investigated at ambient temperature according to ASTM standard D 3039-00. The obtained results show that tensile strength and elongation decrease with an increase of Nd-Fe-B particles content in epoxy matrix. The modulus of elasticity increases, which means that in exploitation material with higher magnetic powder content, subjected to the same level of stress, undergoes 2 to 3.5 times smaller deformation. Scanning Electron Microscopy (SEM) was used to examine the morphology of sample surfaces and fracture surfaces caused by the tensile strength tests. The results of SQUID magnetic measurements show an increase of magnetic properties of the investigated composites with increasing content of Nd-Fe-B particles.en
dc.publisherTechnical Faculty, Bor
dc.relationinfo:eu-repo/grantAgreement/MESTD/MPN2006-2010/142035/RS//
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-sa/4.0/
dc.sourceJournal of Mining and Metallurgy B: Metallurgy
dc.subjectcomposite materialsen
dc.subjectpermanent magnetsen
dc.subjectNd-Fe-Ben
dc.subjectepoxy resinen
dc.subjectmechanical propertiesen
dc.subjectmagnetic propertiesen
dc.titleMechanical and magnetic properties of composite materials with polymer matrixen
dc.typearticle
dc.rights.licenseBY-SA
dcterms.abstractСтајић-Трошић, Ј.; Aлексић, Радослав Р.; Стојановић, Д.; Бурзић, З.; Талијан, Надежда М.; Балановић, Љубиша; Грујић, Aлександар;
dc.citation.volume46
dc.citation.issue1
dc.citation.spage25
dc.citation.epage32
dc.citation.other46(1): 25-32
dc.citation.rankM21
dc.identifier.doi10.2298/JMMB1001025G
dc.identifier.fulltexthttps://cer.ihtm.bg.ac.rs//bitstream/id/9351/732.pdf
dc.identifier.scopus2-s2.0-77957764179
dc.identifier.wos000282142400003
dc.type.versionpublishedVersion


Dokumenti

Thumbnail

Ovaj dokument se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu