Optimal laser parameters for laser induction of graphene on poly(dimethylsiloxane)-based materials
Само за регистроване кориснике
2023
Аутори
Rašljić Rafajilović, MilenaVićentić, Teodora
Spasenović, Marko
Bajuk-Bogdanović, Danica
Pašti, Igor
Radulović, Katarina
Pergal, Marija
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
The objective of this study was to develop optimal laser parameters (resolution, power, and velocity) for the formation of graphene on poly(dimethylsiloxane) (PDMS)-based materials using laser-induced graphene (LIG). A series of novel PDMS/poly(ethylene glycol) (PEG) materials with varying concentrations of PEG (30, 40, and 50 wt.%) was prepared through a blending approach. For comparison, pure PDMS was prepared using a casting method. To the best of our knowledge, the synthesis of PDMS/PEG materials and the direct laser graphenization (LIG) of PDMS/PEG materials have not been reported in the literature. Once the optimal laser parameters were established, the prepared PDMS/PEG/graphene composites were characterized using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and scanning electron microscopy (SEM). The results demonstrated that the addition of PEG led to an enhanced degree of graphenization compared to the pure PDMS sample, which did not induce graphene for...mation. Among the materials tested, the PDMS/PEG/graphene composite with 30 wt.% PEG in the PDMS matrix exhibited the optimal degree of graphenization. SEM analysis of the LIG on PDMS/PEG material revealed a porous network structure. With their improved properties, the developed PDMS/PEG/graphene composites hold promise as materials suitable for the production of flexible electronic devices.
Кључне речи:
laser induced graphene / poly(dimethylsiloxane) / poly(ethylene glycol)Извор:
XVI Mеђународни научни скуп Савремени материјали 2023, Програм рада и Књига апстраката, 7 - 8. септембар 2023. године, Бања Лука /XVI International Scientific Conference Contemporary Materials 2023, Programme and the Book Of Abstracts, September 7 - 8, 2023, Banja Luka, 2023, 40-40Издавач:
- Академија наука и умјетности Републике Српске / Academy of Sciences and Arts of the Republic of Srpska
Финансирање / пројекти:
- Министарство науке, технолошког развоја и иновација Републике Србије, институционално финансирање - 200026 (Универзитет у Београду, Институт за хемију, технологију и металургију - ИХТМ) (RS-MESTD-inst-2020-200026)
Институција/група
IHTMTY - CONF AU - Rašljić Rafajilović, Milena AU - Vićentić, Teodora AU - Spasenović, Marko AU - Bajuk-Bogdanović, Danica AU - Pašti, Igor AU - Radulović, Katarina AU - Pergal, Marija PY - 2023 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/7115 AB - The objective of this study was to develop optimal laser parameters (resolution, power, and velocity) for the formation of graphene on poly(dimethylsiloxane) (PDMS)-based materials using laser-induced graphene (LIG). A series of novel PDMS/poly(ethylene glycol) (PEG) materials with varying concentrations of PEG (30, 40, and 50 wt.%) was prepared through a blending approach. For comparison, pure PDMS was prepared using a casting method. To the best of our knowledge, the synthesis of PDMS/PEG materials and the direct laser graphenization (LIG) of PDMS/PEG materials have not been reported in the literature. Once the optimal laser parameters were established, the prepared PDMS/PEG/graphene composites were characterized using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and scanning electron microscopy (SEM). The results demonstrated that the addition of PEG led to an enhanced degree of graphenization compared to the pure PDMS sample, which did not induce graphene formation. Among the materials tested, the PDMS/PEG/graphene composite with 30 wt.% PEG in the PDMS matrix exhibited the optimal degree of graphenization. SEM analysis of the LIG on PDMS/PEG material revealed a porous network structure. With their improved properties, the developed PDMS/PEG/graphene composites hold promise as materials suitable for the production of flexible electronic devices. PB - Академија наука и умјетности Републике Српске / Academy of Sciences and Arts of the Republic of Srpska C3 - XVI Mеђународни научни скуп Савремени материјали 2023, Програм рада и Књига апстраката, 7 - 8. септембар 2023. године, Бања Лука /XVI International Scientific Conference Contemporary Materials 2023, Programme and the Book Of Abstracts, September 7 - 8, 2023, Banja Luka T1 - Optimal laser parameters for laser induction of graphene on poly(dimethylsiloxane)-based materials SP - 40 EP - 40 UR - https://hdl.handle.net/21.15107/rcub_cer_7115 ER -
@conference{ author = "Rašljić Rafajilović, Milena and Vićentić, Teodora and Spasenović, Marko and Bajuk-Bogdanović, Danica and Pašti, Igor and Radulović, Katarina and Pergal, Marija", year = "2023", abstract = "The objective of this study was to develop optimal laser parameters (resolution, power, and velocity) for the formation of graphene on poly(dimethylsiloxane) (PDMS)-based materials using laser-induced graphene (LIG). A series of novel PDMS/poly(ethylene glycol) (PEG) materials with varying concentrations of PEG (30, 40, and 50 wt.%) was prepared through a blending approach. For comparison, pure PDMS was prepared using a casting method. To the best of our knowledge, the synthesis of PDMS/PEG materials and the direct laser graphenization (LIG) of PDMS/PEG materials have not been reported in the literature. Once the optimal laser parameters were established, the prepared PDMS/PEG/graphene composites were characterized using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and scanning electron microscopy (SEM). The results demonstrated that the addition of PEG led to an enhanced degree of graphenization compared to the pure PDMS sample, which did not induce graphene formation. Among the materials tested, the PDMS/PEG/graphene composite with 30 wt.% PEG in the PDMS matrix exhibited the optimal degree of graphenization. SEM analysis of the LIG on PDMS/PEG material revealed a porous network structure. With their improved properties, the developed PDMS/PEG/graphene composites hold promise as materials suitable for the production of flexible electronic devices.", publisher = "Академија наука и умјетности Републике Српске / Academy of Sciences and Arts of the Republic of Srpska", journal = "XVI Mеђународни научни скуп Савремени материјали 2023, Програм рада и Књига апстраката, 7 - 8. септембар 2023. године, Бања Лука /XVI International Scientific Conference Contemporary Materials 2023, Programme and the Book Of Abstracts, September 7 - 8, 2023, Banja Luka", title = "Optimal laser parameters for laser induction of graphene on poly(dimethylsiloxane)-based materials", pages = "40-40", url = "https://hdl.handle.net/21.15107/rcub_cer_7115" }
Rašljić Rafajilović, M., Vićentić, T., Spasenović, M., Bajuk-Bogdanović, D., Pašti, I., Radulović, K.,& Pergal, M.. (2023). Optimal laser parameters for laser induction of graphene on poly(dimethylsiloxane)-based materials. in XVI Mеђународни научни скуп Савремени материјали 2023, Програм рада и Књига апстраката, 7 - 8. септембар 2023. године, Бања Лука /XVI International Scientific Conference Contemporary Materials 2023, Programme and the Book Of Abstracts, September 7 - 8, 2023, Banja Luka Академија наука и умјетности Републике Српске / Academy of Sciences and Arts of the Republic of Srpska., 40-40. https://hdl.handle.net/21.15107/rcub_cer_7115
Rašljić Rafajilović M, Vićentić T, Spasenović M, Bajuk-Bogdanović D, Pašti I, Radulović K, Pergal M. Optimal laser parameters for laser induction of graphene on poly(dimethylsiloxane)-based materials. in XVI Mеђународни научни скуп Савремени материјали 2023, Програм рада и Књига апстраката, 7 - 8. септембар 2023. године, Бања Лука /XVI International Scientific Conference Contemporary Materials 2023, Programme and the Book Of Abstracts, September 7 - 8, 2023, Banja Luka. 2023;:40-40. https://hdl.handle.net/21.15107/rcub_cer_7115 .
Rašljić Rafajilović, Milena, Vićentić, Teodora, Spasenović, Marko, Bajuk-Bogdanović, Danica, Pašti, Igor, Radulović, Katarina, Pergal, Marija, "Optimal laser parameters for laser induction of graphene on poly(dimethylsiloxane)-based materials" in XVI Mеђународни научни скуп Савремени материјали 2023, Програм рада и Књига апстраката, 7 - 8. септембар 2023. године, Бања Лука /XVI International Scientific Conference Contemporary Materials 2023, Programme and the Book Of Abstracts, September 7 - 8, 2023, Banja Luka (2023):40-40, https://hdl.handle.net/21.15107/rcub_cer_7115 .