Prikaz osnovnih podataka o dokumentu

dc.creatorArsenijević, Zorana
dc.creatorGrbavčić, Željko
dc.creatorGarić Grulović, Radmila
dc.date.accessioned2019-01-30T17:10:17Z
dc.date.available2019-01-30T17:10:17Z
dc.date.issued2002
dc.identifier.issn0354-9836
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/67
dc.description.abstractA modified spouted bed dryer with inert particles was used for drying of solutions and suspensions. The effects of the operating conditions on dryer throughput and product quality were investigated. Experiments were performed in a cylindrical column 215 mm in diameter and 1150 mm in height with a draft tube 70 mm in diameter and 900 mm length. The bed was made of polyethylene particles 3.3 mm in diameter and of density of 921 kg/m3. The pesticide Cineb, inorganic compound calcium carbonate, organic compound calcium stearate, and pure water were used as feeding materials. A drying model using the continuity and momentum equations for turbulent accelerating two-phase flow and conventional rate equations is proposed and discussed. The work is relevant for estimating dryer performance.en
dc.publisherVINCA Institute of Nuclear Sciences
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceThermal Science
dc.subjectspouted beden
dc.subjectdryingen
dc.subjectsolid-water solutionsen
dc.subjectsuspensionsen
dc.titleDrying of solutions and suspensions in the modified spouted bed with draft tubeen
dc.typearticle
dc.rights.licenseBY-NC-ND
dcterms.abstractГарић Груловић, Радмила; Грбавчић, Жељко Б.; Aрсенијевић, Зорана;
dc.citation.volume6
dc.citation.issue2
dc.citation.spage47
dc.citation.epage70
dc.citation.other6(2): 47-70
dc.identifier.doi10.2298/TSCI0202047A
dc.identifier.fulltexthttps://cer.ihtm.bg.ac.rs//bitstream/id/9287/65.pdf
dc.type.versionpublishedVersion


Dokumenti

Thumbnail

Ovaj dokument se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu