Приказ основних података о документу

Sagorevanje tečnog otpada fabrike pesticida u fluidizovanom sloju

dc.creatorArsenijević, Zorana
dc.creatorGrbavčić, Željko
dc.creatorGrbić, Boško
dc.creatorRadić, Nenad
dc.creatorGarić Grulović, Radmila
dc.creatorMiletic, Sasa
dc.creatorSavcic, Gordan
dc.creatorDordevic, Bojana
dc.date.accessioned2019-01-30T17:23:08Z
dc.date.available2019-01-30T17:23:08Z
dc.date.issued2010
dc.identifier.issn0352-5139
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/663
dc.description.abstractIndustrial liquid wastes can be in the form of solutions, suspensions, sludges, scums or waste oil and have organic properties. The objective of this work was to demonstrate the technical feasibility of a fluidized bed as a clean technology for burning liquid waste from a pesticide production plant. The combustion of liquid waste mixtures, obtained from realistic samples, was investigated in a pilot scale fluidized bed with quartz sand particles of 0.63-1.25 mm in diameter and 2610 kg/m3 in density at 800-950°C. To ensure complete combustion of liquid waste and additional fuel, the combustion chamber was supplied with excess air and the U/UmF (at ambient temperature) was in between 1.1 and 2.3. In the fluidized bed chamber, liquid waste, additional liquid fuel and air can be brought into intense contact sufficient to permit combustion in bed without backfire problems. The experimental results show that the fluidized bed furnace offers excellent thermal uniformity and temperature control. The results of the combustion tests showed that degradation of liquid wastes can be successfully realized in a fluidized bed with no harmful gaseous emissions by ensuring that the temperatures of both the bed and the freeboard are not lower than 900°C.en
dc.description.abstractIndustrijski tečni otpad može biti u obliku rastvora, suspenzija, mulja, pene, otpadnog ulja i generalno sadrži različite organske komponente. Predmet ovog rada je demonstracija tretmana tečnog otpada sa visokim sadržajem zagađujućih materija fabrike za proizvodnju pesticida metodom termičke destrukcije u fluidizovanom sloju peska kao tehnički praktične i optimalne tehnologije. Ispitivanja sagorevanja realnih tečnih otpadnih smeša fabrike pesticida su izvršena u poluindustrijskom-demonstracionom postrojenju, tj. u fluidizacionoj koloni sa slojem kvarcnog peska granulacije 0,63-1,25 mm i gustine 2610 kg/m3 na 800-950°C. U cilju obezbeđenja potpunog sagorevanja tečnog otpada, u fluidizacionu kolonu je uvođen vazduh u višku i odnos U/UmF (na temperaturi okoline) je iznosio između 1,1 i 2,3. U fluidizacionoj koloni se tečni otpad, dodatno tečno gorivo i vazduh mogu dovesti u stanje intenzivnog kontakta što omogućava stabilno i homogeno sagorevanje u sloju. Rezultati eksperimentalnih ispitivanja pokazuju da se u fluidizovanom sloju peska ostvaruje veoma dobra termička uniformnost i kontrola temperatura. Rezultati ispitivanja sagorevanja su pokazali da se tečni otpad sa visokim sadržajem zagađujućih materija može uspešno termički tretirati u fluidizovanom sloju peska bez emisije štetnih produkata sagorevanja, pod uslovom da su u sloju i iznad sloja obezbeđene temperature iznad 900°C.sr
dc.publisherSerbian Chemical Society
dc.relationinfo:eu-repo/grantAgreement/MESTD/MPN2006-2010/142014/RS//
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceJournal of the Serbian Chemical Society
dc.subjectfluidized bed incineratoren
dc.subjectliquid wasteen
dc.subjectpesticide production planten
dc.subjectdesignen
dc.subjectoperating experienceen
dc.titleFluidized bed combustion of pesticide-manufacture liquid wastesen
dc.titleSagorevanje tečnog otpada fabrike pesticida u fluidizovanom slojusr
dc.typearticle
dc.rights.licenseBY-NC-ND
dcterms.abstractДордевиц, Бојана; Милетиц, Саса; Aрсенијевић, Зорана; Грбавциц, Зељко; Грбић, Бошко; Гарић Груловић, Радмила; Радић, Ненад; Савциц, Гордан; Сагоревање течног отпада фабрике пестицида у флуидизованом слоју; Сагоревање течног отпада фабрике пестицида у флуидизованом слоју;
dc.citation.volume75
dc.citation.issue4
dc.citation.spage523
dc.citation.epage535
dc.citation.other75(4): 523-535
dc.citation.rankM23
dc.identifier.doi10.2298/JSC090820024A
dc.identifier.fulltexthttps://cer.ihtm.bg.ac.rs//bitstream/id/9289/661.pdf
dc.identifier.wos000277339000011
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу