Micromorphological and chemical changes on the glazed ceramics irradiated by the CO2 laser
Микроморфолошке и хемијске промене глазиране керамике озрачене CO2 ласером
Само за регистроване кориснике
2016
Поглавље у монографији (Објављена верзија)
,
ANURS
Метаподаци
Приказ свих података о документуАпстракт
This paper presents the results of the micromorphological and chemical changes on the surface of a glazed ceramic sample irradiated by the CO2 laser. The tested sample is a part of a title. The laser irradiation effects were studied as a function of the number of laser pulses and lase fluences around and over the damage threshold. The obtained modifications were investigated because these are essential in laser processing of the ceramics. The CO2 laser with λ= 10.6 μm and full width at half the maximum pulse τ=100 ps has been used for the surface treatment. The ceramic surface morphology modifications, induced by laser, were characterized by a scanning electron microscope (SEM), while the composition was examined by energy-dispersive (EDX) and X-ray fluorescence (XRF) spectroscopy. The results show that there are significant differences depending on the applied laser fluences and number of pulses.
У раду су приказани резултати испитивања микроморфолошких и хемијских промена на површини глазиране керамике, озрачене CO2 ласером. Испитивани узорак је део керамичке плочице. Ефекти ласерског деловања су испитивани у зависности од броја ласерских импулса и ласерске флуенце око и изнад прага пштећења. Добијене промене су испитиване јер су веома значајне у ласерској обради керамике. CO2 ласер са таласном дужином λ= 10.6 μm и трајањем импулса τ=100 ps, је коришћен за обраду површине. Морфолошке промене површине керамике изазване деловањем ласером су испитане скенирајућим електронсим микроскопом (СЕМ), а хемијски састав испитан је EDX и X-ray флуоресцентном спектроскопијом (XRF). Резултати показују да постоје значајне разлике у зависности од примењених ласерских флуенци и броја импулса.
Кључне речи:
ceramics / CO2 laser / laser processing / SEM / EDX / XRFИзвор:
Contemporary Materials, 2016, VIII, 561-572Издавач:
- Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska
Финансирање / пројекти:
- Истраживање и оптимизација технолошких и функционалних перформанси вентилационог млина термоелектране Костолац Б (RS-MESTD-Technological Development (TD or TR)-34028)
Напомена:
- Scientific conferences Book XXXVIII, Department of natural-mathematical and technical sciences, Book 29
Институција/група
IHTMTY - CHAP AU - Radojković, Bojana AU - Ristić, Slavica AU - Polić, Suzana R. AU - Davidović, Milorad PY - 2016 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/6221 AB - This paper presents the results of the micromorphological and chemical changes on the surface of a glazed ceramic sample irradiated by the CO2 laser. The tested sample is a part of a title. The laser irradiation effects were studied as a function of the number of laser pulses and lase fluences around and over the damage threshold. The obtained modifications were investigated because these are essential in laser processing of the ceramics. The CO2 laser with λ= 10.6 μm and full width at half the maximum pulse τ=100 ps has been used for the surface treatment. The ceramic surface morphology modifications, induced by laser, were characterized by a scanning electron microscope (SEM), while the composition was examined by energy-dispersive (EDX) and X-ray fluorescence (XRF) spectroscopy. The results show that there are significant differences depending on the applied laser fluences and number of pulses. AB - У раду су приказани резултати испитивања микроморфолошких и хемијских промена на површини глазиране керамике, озрачене CO2 ласером. Испитивани узорак је део керамичке плочице. Ефекти ласерског деловања су испитивани у зависности од броја ласерских импулса и ласерске флуенце око и изнад прага пштећења. Добијене промене су испитиване јер су веома значајне у ласерској обради керамике. CO2 ласер са таласном дужином λ= 10.6 μm и трајањем импулса τ=100 ps, је коришћен за обраду површине. Морфолошке промене површине керамике изазване деловањем ласером су испитане скенирајућим електронсим микроскопом (СЕМ), а хемијски састав испитан је EDX и X-ray флуоресцентном спектроскопијом (XRF). Резултати показују да постоје значајне разлике у зависности од примењених ласерских флуенци и броја импулса. PB - Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska T2 - Contemporary Materials T1 - Micromorphological and chemical changes on the glazed ceramics irradiated by the CO2 laser T1 - Микроморфолошке и хемијске промене глазиране керамике озрачене CO2 ласером VL - VIII SP - 561 EP - 572 UR - https://hdl.handle.net/21.15107/rcub_cer_6221 ER -
@inbook{ author = "Radojković, Bojana and Ristić, Slavica and Polić, Suzana R. and Davidović, Milorad", year = "2016", abstract = "This paper presents the results of the micromorphological and chemical changes on the surface of a glazed ceramic sample irradiated by the CO2 laser. The tested sample is a part of a title. The laser irradiation effects were studied as a function of the number of laser pulses and lase fluences around and over the damage threshold. The obtained modifications were investigated because these are essential in laser processing of the ceramics. The CO2 laser with λ= 10.6 μm and full width at half the maximum pulse τ=100 ps has been used for the surface treatment. The ceramic surface morphology modifications, induced by laser, were characterized by a scanning electron microscope (SEM), while the composition was examined by energy-dispersive (EDX) and X-ray fluorescence (XRF) spectroscopy. The results show that there are significant differences depending on the applied laser fluences and number of pulses., У раду су приказани резултати испитивања микроморфолошких и хемијских промена на површини глазиране керамике, озрачене CO2 ласером. Испитивани узорак је део керамичке плочице. Ефекти ласерског деловања су испитивани у зависности од броја ласерских импулса и ласерске флуенце око и изнад прага пштећења. Добијене промене су испитиване јер су веома значајне у ласерској обради керамике. CO2 ласер са таласном дужином λ= 10.6 μm и трајањем импулса τ=100 ps, је коришћен за обраду површине. Морфолошке промене површине керамике изазване деловањем ласером су испитане скенирајућим електронсим микроскопом (СЕМ), а хемијски састав испитан је EDX и X-ray флуоресцентном спектроскопијом (XRF). Резултати показују да постоје значајне разлике у зависности од примењених ласерских флуенци и броја импулса.", publisher = "Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska", journal = "Contemporary Materials", booktitle = "Micromorphological and chemical changes on the glazed ceramics irradiated by the CO2 laser, Микроморфолошке и хемијске промене глазиране керамике озрачене CO2 ласером", volume = "VIII", pages = "561-572", url = "https://hdl.handle.net/21.15107/rcub_cer_6221" }
Radojković, B., Ristić, S., Polić, S. R.,& Davidović, M.. (2016). Micromorphological and chemical changes on the glazed ceramics irradiated by the CO2 laser. in Contemporary Materials Бања Лука: Академија наука и умјетности Републике Српске / Banja Luka : Academy of Sciences and Arts of the Republic of Srpska., VIII, 561-572. https://hdl.handle.net/21.15107/rcub_cer_6221
Radojković B, Ristić S, Polić SR, Davidović M. Micromorphological and chemical changes on the glazed ceramics irradiated by the CO2 laser. in Contemporary Materials. 2016;VIII:561-572. https://hdl.handle.net/21.15107/rcub_cer_6221 .
Radojković, Bojana, Ristić, Slavica, Polić, Suzana R., Davidović, Milorad, "Micromorphological and chemical changes on the glazed ceramics irradiated by the CO2 laser" in Contemporary Materials, VIII (2016):561-572, https://hdl.handle.net/21.15107/rcub_cer_6221 .