Far Infrared Reflectivity Properties of BaTiO3 Ceramics
Authorized Users Only
2001
Authors
Nikolić, Pantelija M.
Vasiljević-Radović, Dana

Radulović, Katarina

Đurić, Stevan
Siapkas, Dimitrios I.
Zorba, Triantafyllia T.
Ristić, Momčilo M.
Article (Published version)

Carl Hanser Verlag, München
Metadata
Show full item recordAbstract
Far-infrared and infrared reflectivity measurements have been made on pure BaTiO3, BaTiO3 doped with 5 mol% LiF and (Ba,Ca,Pb)TiO3 at room temperature in the range between 50 and 1000 cm–1. A fitting procedure, based on a four-parameter model, and Kramers-Krönig analysis of the spectra were performed and the optical parameters of the observed ionic oscillators determined. Group theory analysis has been done and the number of experimentally observed active modes was compared with theoretical predictions. It was shown that the high frequency dielectric permittivity increases from 1.88 to 5.13 for pure BaTiO3 sintered at 1320 °C for 2 to 10 h, respectively. It is also shown that infrared optical reflectivity measurements could give useful results for boundary cases when it is difficult to distinguish if a sample has a cubic or tetragonal structure. Reflectivity data and its numerical analysis can also give information on the degree of the sintering process and density of the samples.
Keywords:
Reflectivity; BaTiOM3 ceramics; Kramers-Krönig analysis; Optical parameters / Reflectivity / BaTiOM3 ceramics / Kramers-Krönig analysis / Optical parametersSource:
Zeitschrift fur Metallkunde, 2001, 92, 2, 115-118Publisher:
- Carl Hanser Verlag
Collections
Institution/Community
IHTMTY - JOUR AU - Nikolić, Pantelija M. AU - Vasiljević-Radović, Dana AU - Radulović, Katarina AU - Đurić, Stevan AU - Siapkas, Dimitrios I. AU - Zorba, Triantafyllia T. AU - Ristić, Momčilo M. PY - 2001 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/5697 AB - Far-infrared and infrared reflectivity measurements have been made on pure BaTiO3, BaTiO3 doped with 5 mol% LiF and (Ba,Ca,Pb)TiO3 at room temperature in the range between 50 and 1000 cm–1. A fitting procedure, based on a four-parameter model, and Kramers-Krönig analysis of the spectra were performed and the optical parameters of the observed ionic oscillators determined. Group theory analysis has been done and the number of experimentally observed active modes was compared with theoretical predictions. It was shown that the high frequency dielectric permittivity increases from 1.88 to 5.13 for pure BaTiO3 sintered at 1320 °C for 2 to 10 h, respectively. It is also shown that infrared optical reflectivity measurements could give useful results for boundary cases when it is difficult to distinguish if a sample has a cubic or tetragonal structure. Reflectivity data and its numerical analysis can also give information on the degree of the sintering process and density of the samples. PB - Carl Hanser Verlag T2 - Zeitschrift fur Metallkunde T1 - Far Infrared Reflectivity Properties of BaTiO3 Ceramics VL - 92 IS - 2 SP - 115 EP - 118 DO - 10.3139/ijmr-2001-0025 ER -
@article{ author = "Nikolić, Pantelija M. and Vasiljević-Radović, Dana and Radulović, Katarina and Đurić, Stevan and Siapkas, Dimitrios I. and Zorba, Triantafyllia T. and Ristić, Momčilo M.", year = "2001", abstract = "Far-infrared and infrared reflectivity measurements have been made on pure BaTiO3, BaTiO3 doped with 5 mol% LiF and (Ba,Ca,Pb)TiO3 at room temperature in the range between 50 and 1000 cm–1. A fitting procedure, based on a four-parameter model, and Kramers-Krönig analysis of the spectra were performed and the optical parameters of the observed ionic oscillators determined. Group theory analysis has been done and the number of experimentally observed active modes was compared with theoretical predictions. It was shown that the high frequency dielectric permittivity increases from 1.88 to 5.13 for pure BaTiO3 sintered at 1320 °C for 2 to 10 h, respectively. It is also shown that infrared optical reflectivity measurements could give useful results for boundary cases when it is difficult to distinguish if a sample has a cubic or tetragonal structure. Reflectivity data and its numerical analysis can also give information on the degree of the sintering process and density of the samples.", publisher = "Carl Hanser Verlag", journal = "Zeitschrift fur Metallkunde", title = "Far Infrared Reflectivity Properties of BaTiO3 Ceramics", volume = "92", number = "2", pages = "115-118", doi = "10.3139/ijmr-2001-0025" }
Nikolić, P. M., Vasiljević-Radović, D., Radulović, K., Đurić, S., Siapkas, D. I., Zorba, T. T.,& Ristić, M. M.. (2001). Far Infrared Reflectivity Properties of BaTiO3 Ceramics. in Zeitschrift fur Metallkunde Carl Hanser Verlag., 92(2), 115-118. https://doi.org/10.3139/ijmr-2001-0025
Nikolić PM, Vasiljević-Radović D, Radulović K, Đurić S, Siapkas DI, Zorba TT, Ristić MM. Far Infrared Reflectivity Properties of BaTiO3 Ceramics. in Zeitschrift fur Metallkunde. 2001;92(2):115-118. doi:10.3139/ijmr-2001-0025 .
Nikolić, Pantelija M., Vasiljević-Radović, Dana, Radulović, Katarina, Đurić, Stevan, Siapkas, Dimitrios I., Zorba, Triantafyllia T., Ristić, Momčilo M., "Far Infrared Reflectivity Properties of BaTiO3 Ceramics" in Zeitschrift fur Metallkunde, 92, no. 2 (2001):115-118, https://doi.org/10.3139/ijmr-2001-0025 . .