Приказ основних података о документу

Ispitivanje interakcije rubinskog lasera sa staklom

dc.creatorRadojković, Bojana M.
dc.creatorRistić, Slavica
dc.creatorPolić-Radovanović, Suzana R.
dc.date.accessioned2022-12-15T15:07:41Z
dc.date.available2022-12-15T15:07:41Z
dc.date.issued2013
dc.identifier.issn1451-2092
dc.identifier.urihttps://scindeks.ceon.rs/article.aspx?artid=1451-20921302109R
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/5491
dc.description.abstractThis paper presents the results of the ruby laser light interaction with glass surface. The investigation was conducted in order to determine the maximum density of laser light energy (λ = 694.3 nm, t = 30ns) that can be safely applied in different laser systems used in nondestructive testing methods (NDT). The process of irradiation took place in atmospheric conditions. The results show that interaction of laser beams with glass materials is a complex phenomenon. It depends on many factors and it is associated with localized formation of plasma, heating of the material that leads to melting and transient stresses causing mechanical damages. The zones of laser light interactions were investigated by scanning electron microscope (SEM) with energy-dispersal unit for the analysis of X-ray (EDX). The results obtained by SEM and EDX analysis show that the maximum allowable energy density is 5 J/cm2 for ruby laser light.sr
dc.description.abstractУ овом раду је приказан део резултата истраживања која се односе на проучавање интеракције светлости рубинског ласера и површине стакла. Циљ испитивања је одређивање максималне густине енергије ласерске светлости (λ = 694.3 nm, t = 30ns), која може безбедно да се користи у различитим ласерским системима за испитивање без разарања (ИБР). Озрачавање стаклених узорака је вршено у атмосферским условима. Резултати показују да је интеракција ласерске светлости са стаклом веома комплексан феномен. Резултати интеракције зависе од више фактора и повезани су са формирањем локалне плазме и грејањем материјала које доводи до топљења и напрезања што причињава механичка оштећења. Зоне интеракције ласерске светлости са површином стакла су испитивани скенирајућим електронским микроскопом (SEM) и енергодисперзивним детектором рендгенских зрака (EDX). Резултати добијени SEM и EDX анализом показују да је DE = 5·J/cm2 максимално дозвољена енергија за безбедан рад оптичких система који користе рубински ласер.sr
dc.language.isoensr
dc.publisherBelgrade : Faculty of Mechanical Engineering, University of Belgradesr
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/34022/RS//sr
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/35046/RS//sr
dc.rightsopenAccesssr
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceFME Transactionssr
dc.subjectruby laser interactionsr
dc.subjectglasssr
dc.subjectSEMsr
dc.subjectEDXsr
dc.titleStudy of ruby laser beam interaction with glasssr
dc.titleIspitivanje interakcije rubinskog lasera sa staklomsr
dc.typearticlesr
dc.rights.licenseBYsr
dc.rights.holderFaculty of Mechanical Engineering, University of Belgradesr
dc.citation.volume41
dc.citation.issue2
dc.citation.spage109
dc.citation.epage113
dc.citation.rankM24
dc.identifier.rcubhttps://hdl.handle.net/21.15107/rcub_cer_5491
dc.identifier.fulltexthttp://cer.ihtm.bg.ac.rs/bitstream/id/23150/bitstream_23150.pdf
dc.identifier.scopus2-s2.0-84876994116
dc.identifier.wos000409692400004
dc.type.versionpublishedVersionsr


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу