Surface Modification of Aqueduct Ceramics Induced by Nd:Yag Pulsed Laser Treatment
Samo za registrovane korisnike
2017
Članak u časopisu (Objavljena verzija)
,
Old City Publishing, Inc
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
The main aim of this paper is to present the results of the morphological and chemical changes on the surface of a ceramic sample irradiated by the Nd:YAG laser. The tested sample is a part of an aqueduct tile, originating from the archaeological site of Yazd, Iran. The laser irradiation effects were studied as a function of the number of laser pulses and laser fluences around and over the damage threshold. The obtained modifications were investigated because these are essential in laser cleaning of aqueduct ceramics. The Nd: YAG laser with a wavelength, lambda, of 1064 nm and full width at half maximum (FWHM) pulse, tau, of 150 ps has been used for the surface treatment. The ceramic surface morphology modifications, induced by laser, were characterized by a scanning electron microscope (SEM), while the composition was examined by energy-dispersive (EDX) and X-ray fluorescence (XRF) spectroscopy. The results show that there are significant differences depending on the applied laser flu...ences and whether the surface is glazed or not.
Ključne reči:
Nd:YAG laser / ceramic / surface modification / medieval Iranian ceramics / laser cleaning / morphological analysis / chemical analysisIzvor:
Lasers in Engineering, 2017, 36, 4-6, 373-390Izdavač:
- Philadelphia, PA, USA: Old City Publishing, Inc
Finansiranje / projekti:
- Istraživanje i optimizacija tehnoloških i funkcionalnih performansi ventilacionog mlina termoelektrane Kostolac B (RS-MESTD-Technological Development (TD or TR)-34028)
- Primena savremenih mernih i proračunskih tehnika za izučavanje strujnih parametara ventilacionih sistema na modelu energetski izuzetno efikasnog (pasivnog) objekta (RS-MESTD-Technological Development (TD or TR)-35046)
Institucija/grupa
IHTMTY - JOUR AU - Radojković, Bojana M. AU - Ristić, Slavica AU - Polić, Suzana R. AU - Jančić-Heinemann, Radmila PY - 2017 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/5483 AB - The main aim of this paper is to present the results of the morphological and chemical changes on the surface of a ceramic sample irradiated by the Nd:YAG laser. The tested sample is a part of an aqueduct tile, originating from the archaeological site of Yazd, Iran. The laser irradiation effects were studied as a function of the number of laser pulses and laser fluences around and over the damage threshold. The obtained modifications were investigated because these are essential in laser cleaning of aqueduct ceramics. The Nd: YAG laser with a wavelength, lambda, of 1064 nm and full width at half maximum (FWHM) pulse, tau, of 150 ps has been used for the surface treatment. The ceramic surface morphology modifications, induced by laser, were characterized by a scanning electron microscope (SEM), while the composition was examined by energy-dispersive (EDX) and X-ray fluorescence (XRF) spectroscopy. The results show that there are significant differences depending on the applied laser fluences and whether the surface is glazed or not. PB - Philadelphia, PA, USA: Old City Publishing, Inc T2 - Lasers in Engineering T1 - Surface Modification of Aqueduct Ceramics Induced by Nd:Yag Pulsed Laser Treatment VL - 36 IS - 4-6 SP - 373 EP - 390 UR - https://hdl.handle.net/21.15107/rcub_cer_5483 ER -
@article{ author = "Radojković, Bojana M. and Ristić, Slavica and Polić, Suzana R. and Jančić-Heinemann, Radmila", year = "2017", abstract = "The main aim of this paper is to present the results of the morphological and chemical changes on the surface of a ceramic sample irradiated by the Nd:YAG laser. The tested sample is a part of an aqueduct tile, originating from the archaeological site of Yazd, Iran. The laser irradiation effects were studied as a function of the number of laser pulses and laser fluences around and over the damage threshold. The obtained modifications were investigated because these are essential in laser cleaning of aqueduct ceramics. The Nd: YAG laser with a wavelength, lambda, of 1064 nm and full width at half maximum (FWHM) pulse, tau, of 150 ps has been used for the surface treatment. The ceramic surface morphology modifications, induced by laser, were characterized by a scanning electron microscope (SEM), while the composition was examined by energy-dispersive (EDX) and X-ray fluorescence (XRF) spectroscopy. The results show that there are significant differences depending on the applied laser fluences and whether the surface is glazed or not.", publisher = "Philadelphia, PA, USA: Old City Publishing, Inc", journal = "Lasers in Engineering", title = "Surface Modification of Aqueduct Ceramics Induced by Nd:Yag Pulsed Laser Treatment", volume = "36", number = "4-6", pages = "373-390", url = "https://hdl.handle.net/21.15107/rcub_cer_5483" }
Radojković, B. M., Ristić, S., Polić, S. R.,& Jančić-Heinemann, R.. (2017). Surface Modification of Aqueduct Ceramics Induced by Nd:Yag Pulsed Laser Treatment. in Lasers in Engineering Philadelphia, PA, USA: Old City Publishing, Inc., 36(4-6), 373-390. https://hdl.handle.net/21.15107/rcub_cer_5483
Radojković BM, Ristić S, Polić SR, Jančić-Heinemann R. Surface Modification of Aqueduct Ceramics Induced by Nd:Yag Pulsed Laser Treatment. in Lasers in Engineering. 2017;36(4-6):373-390. https://hdl.handle.net/21.15107/rcub_cer_5483 .
Radojković, Bojana M., Ristić, Slavica, Polić, Suzana R., Jančić-Heinemann, Radmila, "Surface Modification of Aqueduct Ceramics Induced by Nd:Yag Pulsed Laser Treatment" in Lasers in Engineering, 36, no. 4-6 (2017):373-390, https://hdl.handle.net/21.15107/rcub_cer_5483 .