Приказ основних података о документу

dc.creatorVuksanović, Marija M.
dc.creatorMladenović, Ivana O.
dc.creatorTomić, Nataša Z.
dc.creatorPetrović, Miloš
dc.creatorRadojević, Vesna J.
dc.creatorMarinković, Aleksandar D.
dc.creatorJančić- Heinemann, Radmila
dc.date.accessioned2022-12-02T10:50:37Z
dc.date.available2022-12-02T10:50:37Z
dc.date.issued2022
dc.identifier.issn0350-820X
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/5423
dc.description.abstractRice husk was used to produce silica particles, which were then used to reinforce the polymer matrix. The synthesized SiO2 particles were characterized using X-ray diffraction, Fourier transforms infrared spectroscopy (FTIR) and scanning electron microscopy with EDS. In a PMMA matrix, prepared SiO2 particles in amounts of 1, 3, and 5 wt.% were used as reinforcing agents. The goal of this research was to see if SiO2 particles had any effect on the mechanical properties of polymer composite materials. The morphology of the composites was examined using a field emission scanning electron microscope (FE-SEM). Vickers microindentation hardness and impact testing were used to determine the mechanical properties of the obtained composites. The indentation creep’s behavior of a polymethylmetacrylate (PMMA) composite material with varying amounts of nanoparticles (SiO2) was investigated and analyzed.sr
dc.description.abstractЉуска пиринча је коришћена за производњу честица силицијум диоксида, које су коришћене за ојачавање полимерне матрице. Синтетизоване честице силицијум диоксида карактерисане су дифракцијом рендгенских зрака, инфрацрвеном спектроскопијом Фуријеове трансформације (ФТИР) и скенирајућом лектронском микроскопом са ЕДС. У матрици полиметил метакриилата, припремљене честицее силицијум диоксида у количинама од 1, 3 и 5 мас. %, коришћене су као ојачање. Циљ овог истраживања био је да се утврди да ли честице силицијум диоксида утичу на механичка својства полимерних композитних материјала. Морфологија композита је испитивана коришћењем поља емисионог скенирајућег електронског микроскопа (ФЕ-СЕМ). За одређивање механичких својстава добијених композита коришћени су Вицкерс микроиндентациони тестови и испитивање на удар. Понашање пузања композитног материјала полиметилметакрилата (ПММА) са различитим количинама наночестица силицијум диоксида је испитано и анализирано.sr
dc.language.isoensr
dc.publisherBelgrade : International Institute for the Science of Sintering (IISS)sr
dc.relationinfo:eu-repo/grantAgreement/MESTD/inst-2020/200135/RS//sr
dc.relationinfo:eu-repo/grantAgreement/MESTD/inst-2020/200287/RS//sr
dc.relationinfo:eu-repo/grantAgreement/MESTD/inst-2020/200026/RS//sr
dc.rightsopenAccesssr
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceScience of sinteringsr
dc.subjectCompositessr
dc.subjectCreep behaviorsr
dc.subjectSilicasr
dc.subjectVickers hardnesssr
dc.subjectСилицијум диоксидsr
dc.subjectкомпозитиsr
dc.subjectтврдоћа по Викерсуsr
dc.subjectпонашање пузањаsr
dc.titleMechanical Properties of Biomass-derived Silica Nanoparticles Reinforced PMMA Composite Materialsr
dc.typearticlesr
dc.rights.licenseBYsr
dc.citation.volume54
dc.citation.issue2
dc.citation.spage211
dc.citation.epage221
dc.citation.rankM22
dc.identifier.doi10.2298/SOS2202211V
dc.identifier.fulltexthttp://cer.ihtm.bg.ac.rs/bitstream/id/22969/0350-820X2202211V.pdf
dc.identifier.scopus2-s2.0-85132947656
dc.type.versionpublishedVersionsr


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу