Приказ основних података о документу

dc.creatorRadetić, Tamara
dc.creatorPopović, M.
dc.creatorJegdić, Bore
dc.creatorRomhanji, E.
dc.date.accessioned2021-03-23T07:49:25Z
dc.date.available2017-01-22
dc.date.issued2016
dc.identifier.issn0947-5117
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/4382
dc.description.abstractInfluence of annealing temperature on beta-(Al3Mg2) phase precipitation and corrosion properties of sensitised Al-6.8wt% Mg alloy is investigated. Sensitisation of specimens annealed at 320 degrees C results in IGC and SCC susceptibility. Microstructural characterization shows fine precipitation of Mg-rich phase forming nearly continuous film at grain boundaries, despite small precipitated fraction (0.5%), and grain boundary faceting. Sensitised specimens annealed at 265 degrees C are IGC susceptible, but SCC resistant. Precipitation at grain boundaries is discrete, although the precipitated fraction is greater (3%) than in specimens annealed at 320 degrees C. Potentiodynamic measurements show that of all measured parameters, charge density is in the strongest correlation with the NAMLT and SSRT results.en
dc.publisherWiley
dc.relationMinistry of Education, Science and Technological Development, Republic of Serbia
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/34018/RS//
dc.relationOffice of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy - DE-AC02-05CH11231
dc.relation.isversionofhttps://cer.ihtm.bg.ac.rs/handle/123456789/1919
dc.rightsembargoedAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceMaterials and Corrosion-Werkstoffe Und Korrosion
dc.subjectannealing temperature
dc.subjectcorrosion
dc.subjectMicrostructural characterization
dc.subjectPotentiodynamic measurements
dc.titleInfluence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloyen
dc.typearticle
dc.rights.licenseBY-NC-ND
dcterms.abstractРомхањи, Е.; Радетић, Тамара; Јегдић, Боре; Поповић, М.;
dc.citation.volume67
dc.citation.issue8
dc.citation.spage867
dc.citation.epage875
dc.citation.other67(8): 867-875
dc.citation.rankM22
dc.description.otherThis is the peer reviewed version of the following article: Radetić T, Popović M, Jegdić B, Romhanji E. Influence of annealing temperature on sensitisation behaviour and corrosion properties of an Al-6.8wt% Mg alloy. Materials and Corrosion-Werkstoffe Und Korrosion. 2016;67(8):867-875, which has been published in final form at [https://doi.org/10.1002/maco.201508709] This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Use of Self-Archived Versions."
dc.description.otherThe published version: [https://cer.ihtm.bg.ac.rs/handle/123456789/1919]
dc.identifier.doi10.1002/maco.201508709
dc.identifier.fulltexthttps://cer.ihtm.bg.ac.rs/bitstream/id/19629/1919acc.pdf
dc.identifier.scopus2-s2.0-84956862974
dc.identifier.wos000383643000009
dc.type.versionacceptedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу