Приказ основних података о документу

dc.creatorManasijević, Dragan
dc.creatorBalanović, Ljubiša
dc.creatorHoljevac Grgurić, Tamara
dc.creatorGorgievski, Milan
dc.creatorMarković, Ivana
dc.creatorĆosović, Vladan
dc.creatorPremović, Milena
dc.creatorMinić, Duško
dc.date.accessioned2021-02-10T20:30:41Z
dc.date.available2021-02-10T20:30:41Z
dc.date.issued2020
dc.identifier.issn2217-8961
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/4222
dc.description.abstractLow-melting alloys, based on bismuth and indium, have found commercial use in soldering, safety devices, coatings, and bonding applications. In this respect, the accurate knowledge of their thermal properties such as melting and solidification temperatures, latent heat of melting, supercooling tendency, etc. is of large importance. In the present research, low-melting alloy with nominal composition Bi40In40Pb20 (at. %) was investigated by means of scanning electron microscopy (SEM) with energy dispersive Xray spectrometry (EDS) and by differential scanning calorimetry (DSC). Microstructural and chemical (SEM-EDS) analysis has revealed the existence of two coexisting phases in the prepared alloy, which was identified as BiIn and (Pb). Melting and solidification temperatures and the related heat effects were measured by the DSC technique. The solidus temperature obtained from the DSC heating curves was 76.3 °C and the solidus temperature obtained from the corresponding DSC cooling runs was 61.2 °C. The experimentally obtained results were compared with the results of thermodynamic calculation according to CALPHAD (calculation of phase diagram) approach, and a close agreement was noticed.sr
dc.language.isoensr
dc.publisherSerbia : Association of Metallurgical Engineers of Serbiasr
dc.relationinfo:eu-repo/grantAgreement/MESTD/inst-2020/200131/RS//sr
dc.rightsopenAccesssr
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceMetallurgical & Materials Engineeringsr
dc.subjectBi–In-Pb systemsr
dc.subjectLow-melting alloysr
dc.subjectSEM-EDS, DSCsr
dc.titleThermal and microstructural analysis of the low-melting Bi-In-Pb alloysr
dc.typearticlesr
dc.rights.licenseBYsr
dcterms.abstractМанасијевић, Драган М.; Минић, Душко; Хољевац Гргурић, Тамара; Балановић, Љубиша; Премовић, Милена; Ћосовић, Владан; Марковић, Ивана И.; Горгиевски, Милан;
dc.citation.volume26
dc.citation.issue4
dc.citation.spage385
dc.citation.epage394
dc.citation.rankM24~
dc.identifier.doi10.30544/564
dc.identifier.fulltexthttps://cer.ihtm.bg.ac.rs/bitstream/id/19098/bitstream_19098.pdf
dc.identifier.scopus2-s2.0-85099344753
dc.identifier.wos000605080200006
dc.type.versionpublishedVersionsr


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу