Importance of Applying Risk Analysis to Pressure Equipment Tested by a Special Program
Važnost primene analize rizika kod opreme pod pritiskom koja se ispituje po posebnom programu
Konferencijski prilog (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
According to PED 2014/68 and the Regulation on technical requirements for design, manufac-
ture and conformity assessment of pressure equipment, pressure equipment is divided into high- and
low-level risk level equipment, depending on the type of equipment, condition and group of fluids and
products of volume and pressure, i.e. accumulated energy. This equipment is tested according to the
Regulation on the inspection of pressure equipment during its service life. However, there are a num-
ber of pressure equipment that cannot be tested according to a regular program, most often due to
their construction, or working fluid. This equipment is tested according to a special program that is
made for each equipment particular. As part of this program, it is necessary to do a risk analysis.
This paper will explain the importance of applying risk analysis and will show its application to
certain sets of equipment.
Oprema pod pritiskom se prema PED 2014/68 i Pravilniku o tehničkim zahtevima za projektovanje, izradu i ocenjivanje usaglašenosti opreme pod pritiskom deli na opremu visokog i niskog
nivoa opasnost, u zavisnosti od vrste opreme, stanja i grupe fluida i proizvoda zapremine i pritiska,
odnosno akumulirane energije. Ova oprema se ispituje prema Pravilniku o pregledu opreme pod
pritiskom tokom veka upotrebe. Međutim, postoji određeni broj opreme pod pritiskom koji ne može
da se ispituje po redovnom programu, najčešće zbog svoje konstrukcije, ili radnog fluida. Ova
oprema se ispituje po posebnom programu koji se pravi za svaku opremu posebno. U sklopu ovog
programa potrebno je uraditi i analizu rizika. U ovom radu će biti pojašnjena važnost primene analize rizika i biće prikazana njena primena na određene sklopove opreme.
Ključne reči:
pressure equipment / PED / risk analysis / oprema pod pritiskom / analiza rizikaIzvor:
Proceedings, 8th International Conference on Renewable Electrical Power Source, SMEITS, 2020, 2020, 271-278Izdavač:
- Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS/ Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia - SMEITS
- Društvo za obnovljive izvore električne energije / Society for Renewable Electrical Power Sources
Napomena:
- 8th International Conference on Renewable Electrical Power Sources, Belgrade, October 16, 2020 / 8. Međunarodna konferencija o obnovljivim izvorima električne energije, Beograd, 16. oktobar 2020
URI
http://www.smeits.rs/include/img/mkoiee-2020/Zbornik_8_MKOIEE.pdfhttps://cer.ihtm.bg.ac.rs/handle/123456789/4065
Institucija/grupa
IHTMTY - CONF AU - Петронић, Сања AU - Јарић, Марко AU - Чолић, Катарина AU - Polić, Suzana R. AU - Маљевић, Димитрије PY - 2020 UR - http://www.smeits.rs/include/img/mkoiee-2020/Zbornik_8_MKOIEE.pdf UR - https://cer.ihtm.bg.ac.rs/handle/123456789/4065 AB - According to PED 2014/68 and the Regulation on technical requirements for design, manufac- ture and conformity assessment of pressure equipment, pressure equipment is divided into high- and low-level risk level equipment, depending on the type of equipment, condition and group of fluids and products of volume and pressure, i.e. accumulated energy. This equipment is tested according to the Regulation on the inspection of pressure equipment during its service life. However, there are a num- ber of pressure equipment that cannot be tested according to a regular program, most often due to their construction, or working fluid. This equipment is tested according to a special program that is made for each equipment particular. As part of this program, it is necessary to do a risk analysis. This paper will explain the importance of applying risk analysis and will show its application to certain sets of equipment. AB - Oprema pod pritiskom se prema PED 2014/68 i Pravilniku o tehničkim zahtevima za projektovanje, izradu i ocenjivanje usaglašenosti opreme pod pritiskom deli na opremu visokog i niskog nivoa opasnost, u zavisnosti od vrste opreme, stanja i grupe fluida i proizvoda zapremine i pritiska, odnosno akumulirane energije. Ova oprema se ispituje prema Pravilniku o pregledu opreme pod pritiskom tokom veka upotrebe. Međutim, postoji određeni broj opreme pod pritiskom koji ne može da se ispituje po redovnom programu, najčešće zbog svoje konstrukcije, ili radnog fluida. Ova oprema se ispituje po posebnom programu koji se pravi za svaku opremu posebno. U sklopu ovog programa potrebno je uraditi i analizu rizika. U ovom radu će biti pojašnjena važnost primene analize rizika i biće prikazana njena primena na određene sklopove opreme. PB - Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS/ Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia - SMEITS PB - Društvo za obnovljive izvore električne energije / Society for Renewable Electrical Power Sources C3 - Proceedings, 8th International Conference on Renewable Electrical Power Source, SMEITS, 2020 T1 - Importance of Applying Risk Analysis to Pressure Equipment Tested by a Special Program T1 - Važnost primene analize rizika kod opreme pod pritiskom koja se ispituje po posebnom programu SP - 271 EP - 278 UR - https://hdl.handle.net/21.15107/rcub_cer_4065 ER -
@conference{ author = "Петронић, Сања and Јарић, Марко and Чолић, Катарина and Polić, Suzana R. and Маљевић, Димитрије", year = "2020", abstract = "According to PED 2014/68 and the Regulation on technical requirements for design, manufac- ture and conformity assessment of pressure equipment, pressure equipment is divided into high- and low-level risk level equipment, depending on the type of equipment, condition and group of fluids and products of volume and pressure, i.e. accumulated energy. This equipment is tested according to the Regulation on the inspection of pressure equipment during its service life. However, there are a num- ber of pressure equipment that cannot be tested according to a regular program, most often due to their construction, or working fluid. This equipment is tested according to a special program that is made for each equipment particular. As part of this program, it is necessary to do a risk analysis. This paper will explain the importance of applying risk analysis and will show its application to certain sets of equipment., Oprema pod pritiskom se prema PED 2014/68 i Pravilniku o tehničkim zahtevima za projektovanje, izradu i ocenjivanje usaglašenosti opreme pod pritiskom deli na opremu visokog i niskog nivoa opasnost, u zavisnosti od vrste opreme, stanja i grupe fluida i proizvoda zapremine i pritiska, odnosno akumulirane energije. Ova oprema se ispituje prema Pravilniku o pregledu opreme pod pritiskom tokom veka upotrebe. Međutim, postoji određeni broj opreme pod pritiskom koji ne može da se ispituje po redovnom programu, najčešće zbog svoje konstrukcije, ili radnog fluida. Ova oprema se ispituje po posebnom programu koji se pravi za svaku opremu posebno. U sklopu ovog programa potrebno je uraditi i analizu rizika. U ovom radu će biti pojašnjena važnost primene analize rizika i biće prikazana njena primena na određene sklopove opreme.", publisher = "Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS/ Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia - SMEITS, Društvo za obnovljive izvore električne energije / Society for Renewable Electrical Power Sources", journal = "Proceedings, 8th International Conference on Renewable Electrical Power Source, SMEITS, 2020", title = "Importance of Applying Risk Analysis to Pressure Equipment Tested by a Special Program, Važnost primene analize rizika kod opreme pod pritiskom koja se ispituje po posebnom programu", pages = "271-278", url = "https://hdl.handle.net/21.15107/rcub_cer_4065" }
Петронић, С., Јарић, М., Чолић, К., Polić, S. R.,& Маљевић, Д.. (2020). Importance of Applying Risk Analysis to Pressure Equipment Tested by a Special Program. in Proceedings, 8th International Conference on Renewable Electrical Power Source, SMEITS, 2020 Savez mašinskih i elektrotehničkih inženjera i tehničara Srbije - SMEITS/ Union of Mechanical and Electrotechnical Engineers and Technicians of Serbia - SMEITS., 271-278. https://hdl.handle.net/21.15107/rcub_cer_4065
Петронић С, Јарић М, Чолић К, Polić SR, Маљевић Д. Importance of Applying Risk Analysis to Pressure Equipment Tested by a Special Program. in Proceedings, 8th International Conference on Renewable Electrical Power Source, SMEITS, 2020. 2020;:271-278. https://hdl.handle.net/21.15107/rcub_cer_4065 .
Петронић, Сања, Јарић, Марко, Чолић, Катарина, Polić, Suzana R., Маљевић, Димитрије, "Importance of Applying Risk Analysis to Pressure Equipment Tested by a Special Program" in Proceedings, 8th International Conference on Renewable Electrical Power Source, SMEITS, 2020 (2020):271-278, https://hdl.handle.net/21.15107/rcub_cer_4065 .