Multipurpose MEMS thermal sensor based on thermopiles
Само за регистроване кориснике
Đurić, Zoran G.
Чланак у часопису (Објављена верзија)
МетаподациПриказ свих података о документу
This paper presents design, fabrication and experimental results of multipurpose thermopile based sensor which is compatible with technological processes already developed at IHTM-IMTM for fabrication of pressure sensors. Thermal isolation is assured using back etching of bulk silicon. Thermopiles have multilayer structure and sandwich membrane consists of layer of residual n-Si and sputtered oxide. Post-etching technique was developed and functional structures with membranes below 3 mu m were fabricated. Steady state and transient behaviour of fabricated structures were anticipated by applying two-zone 1D analytical model and FEA Comsol simulation. Sensors were tested as ac-dc transfer devices, gas flow meters and vacuum detectors.
Кључне речи:thermopile / micromachining / analytical and FEA modelling / thermal converter / flow meter / vacuum detector
Извор:Sensors and Actuators, A: Physical, 2008, 141, 2, 404-413
- Elsevier Science Sa, Lausanne