Prikaz osnovnih podataka o dokumentu

dc.creatorPavlović, Miroslav M.
dc.creatorPantović, Radoje V.
dc.creatorJanković, Zoran
dc.creatorNedeljković, Dragan
dc.creatorNikolić, Nebojša D.
dc.creatorPavlović, Miomir
dc.creatorStevanović, Jasmina
dc.date.accessioned2020-12-15T23:47:33Z
dc.date.available2020-12-15T23:47:33Z
dc.date.issued2019
dc.identifier.issn1452-3981
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/4018
dc.description.abstractThis manuscript presents the results of investigating the properties of composite materials having poly(lactide-co-glycolide) (PLGA) matrix filled with electrolytically produced copper powder whose particles have a highly developed branched structure. The volume fraction of the copper powder used as a filler for the preparation of the composite was varied from 0.4 to 7.2 vol. %. The samples were prepared at 140 °C by hot molding injection. The effect of the morphology of electrolytically obtained copper powder on the appearance of the percolation threshold and on the conductivity of the composites was studied. Characterization included impedance spectroscopy (IS) measurement of electric conductivity and scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), and Fourier-transform Infrared Spectroscopy (FTIR) morphological analysis. Electric conductive pathways were formed throughout the entire volume of the composites, where their formation was purely stochastic in all the dimensions. The percolation threshold was 2.72 vol.%, which is significantly lower than the one stated in the literature for similar composites, since these kind of composites are investigated for the first time. This property can be attributed to the use of a filler of different, diverse morphologies.en
dc.publisherESG
dc.relationinfo:eu-repo/grantAgreement/MESTD/Basic Research (BR or ON)/172060/RS//
dc.relationinfo:eu-repo/grantAgreement/MESTD/Basic Research (BR or ON)/172046/RS//
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceInternational Journal of Electrochemical Science
dc.subjectelectrical conductivity
dc.subjectbiodegradable composite material
dc.subjectPoly(lactide-co-glycolide)
dc.subjectelectrolytic copper powder
dc.subjectFTIR
dc.subjecthardness
dc.titleElectric Conductivity of Electrolytic Copper Powder Filled Poly(Lactide-co-Glycolide) Compositesen
dc.typearticleen
dc.rights.licenseBY
dcterms.abstractПантовић, Радоје В.; Стевановић, Јасмина; Николић, Небојша; Недељковић, Драган; Јанковић, Зоран; Павловић, Мирослав М.; Павловић, Миомир Г.;
dc.rights.holderThe Authors
dc.citation.spage9825
dc.citation.epage9837
dc.citation.rankM23
dc.identifier.doi10.20964/2019.10.02
dc.identifier.fulltexthttps://cer.ihtm.bg.ac.rs/bitstream/id/18478/141009825.pdf
dc.identifier.scopus2-s2.0-85084840271
dc.identifier.wos000489224100038
dc.type.versionpublishedVersion


Dokumenti

Thumbnail

Ovaj dokument se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu