Show simple item record

dc.creatorCvetanović Zobenica, Katarina
dc.creatorTadić, Nenad
dc.creatorLačnjevac, Uroš
dc.creatorMilinković, Evgenija
dc.creatorRašljić Rafajilović, Milena
dc.creatorSmiljanić, Milče M.
dc.creatorVasiljević-Radović, Dana
dc.creatorStanisavljev, Dragomir
dc.date.accessioned2020-12-09T14:37:33Z
dc.date.available2021-12-06
dc.date.issued2020
dc.identifier.isbn978-86-7466-852-8
dc.identifier.urihttps://www.etran.rs/2020/IcETRAN/About_Conference/
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/4001
dc.description.abstractDye Sensitized Solar cells (DSSC) are very attractive due to their low cost fabricating methods and used materials. One of the most important parts of the cells is the photoanode. Many semiconducting materials are used for this purpose, but most common one is titanium dioxide (TiO2). Optimal sintering temperature of anode plays important role in performance of TiO2 layer in DSSC, since it provides good electrical contact between particles, which consequently leads to better electron transfer through the cell, but still restricts unfavorable phase transformation. In this paper two identical cells with natural pigment hypericin as sensitizer were assembled with anodes sintered on two different temperatures (500 °C and 600 °C), so their performance parameters could be compared. The ratios between the maximal power densities (Pmax) and solar to electrical energy conversion efficiencies (η) for the two measured cells are 5 times in favor for the cell sintered at 600 °C, which shows the importance of temperature treatment of TiO2 electrodes for better performance of solar cells.en
dc.language.isoensr
dc.publisherBelgrade : ETRAN Societysr
dc.relationinfo:eu-repo/grantAgreement/MESTD/inst-2020/200026/RS//sr
dc.relationinfo:eu-repo/grantAgreement/MESTD/Basic Research (BR or ON)/172015/RS//sr
dc.rightsopenAccesssr
dc.rights.urihttps://creativecommons.org/licenses/by/4.0/
dc.sourceProccedings - 7th International Conference on Electrical, Electronic and Computing Engineering, IcETRAN 2020sr
dc.subjectDSSCsr
dc.subjectDSSCsr
dc.subjectTiO2 anodesr
dc.subjectsintering temperaturesr
dc.subjecthypericinsr
dc.subjectTiO2 anodesr
dc.subjectsintering temperaturesr
dc.subjecthypericinsr
dc.titleInfluence of sintering temperature on the performance of titanium dioxide anode in Dye Sensitized Solar Cells with natural pigment hypericinen
dc.typeconferenceObjectsr
dc.rights.licenseBYsr
dcterms.abstractРашљић Рафајиловић, Милена; Цветановић Зобеница, Катарина; Тадић, Ненад; Лачњевац, Урош; Милинковић, Евгенија; Смиљанић, Милче М.; Васиљевић-Радовић, Дана; Станисављев, Драгомир;
dc.type.versionpublishedVersionsr


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record