Приказ основних података о документу

dc.creatorVorkapić, Miloš
dc.creatorSimonović, Aleksandar
dc.creatorIvanov, Toni
dc.date.accessioned2020-12-04T10:18:48Z
dc.date.available2020-12-04T10:18:48Z
dc.date.issued2020
dc.identifier.isbn978-3-030-58361-3
dc.identifier.issn2367-3370
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/3972
dc.description.abstractAdditive manufacturing technology helped many organizations to save money in the product design process by reducing prototype costs, and also by providing a means for early evaluation and decision making. The idea of this paper is to design an electronics enclosure for an intelligent industrial pressure transmitter, using the additive technology. All enclosure elements are made on a 3D printer WANHAO duplicator i3 plus, using PLA materials. The enclosure realization, from CAD drawings to the finished model, enables a designer to correct existing errors, or make certain modifications as required by end-users. A process is described that enables designers to review their decisions at any stage of product realization, thus providing much more freedom in rapid prototyping. In this example, the advantages and disadvantages of additive manufacturing over conventional manufacturing are outlined. Some deficiencies have also been observed, such as mechanical damage to surfaces, burning of surfaces, tearing of prints, and surface roughness. To mitigate such irregularities, both mechanical and chemical finishing methods were used. The example confirmed that the finishing methods can affect the final enclosure dimensions and shape. Further prototype development should focus more on print quality, which depends on the shape of surfaces, the accuracy of the geometry, the uniformity of structure and shape, material density, and the resolution of details.en
dc.language.isoensr
dc.publisherSpringersr
dc.relationinfo:eu-repo/grantAgreement/MESTD/inst-2020/200026/RS//sr
dc.relationinfo:eu-repo/grantAgreement/MESTD/inst-2020/200105/RS//sr
dc.rightsrestrictedAccesssr
dc.sourceLecture Notes in Networks and Systems - Experimental and Computational Investigations in Engineeringsr
dc.subjectPrototype enclosuresr
dc.subjectPressure transmittersr
dc.subjectAdditive manufacturingsr
dc.subject3D printingsr
dc.subjectPLAsr
dc.subjectNozzlesr
dc.subjectQuality controlsr
dc.titleAlgorithm for Applying 3D Printing in Prototype Realization – Case: Enclosure for an Industrial Pressure Transmitteren
dc.typebookPartsr
dc.rights.licenseARRsr
dcterms.abstractВоркапић, Милош; Симоновић, Aлександар; Иванов, Тони;
dc.rights.holderThe Editor and the Authorssr
dc.citation.volume153
dc.citation.spage112
dc.citation.epage129
dc.citation.rankM13
dc.description.otherProceedings of the International Conference of Experimental and Numerical Investigations and New Technologies, CNNTech 2020, vol 153, June 29 – July 02, Zlatibor, Serbia,en
dc.identifier.doi10.1007/978-3-030-58362-0_8
dc.identifier.scopus2-s2.0-85090876224
dc.type.versionpublishedVersionsr


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу