Prikaz osnovnih podataka o dokumentu

dc.creatorSeidel, Carsten
dc.creatorFelischak, Matthias
dc.creatorNikolić, Daliborka
dc.creatorSeidel-Morgenstern, Andreas
dc.creatorPetkovska, Menka
dc.creatorKienle, Achim
dc.date.accessioned2020-11-24T08:02:01Z
dc.date.available2020-11-24T08:02:01Z
dc.date.issued2020
dc.identifier.urihttps://www.mpi-magdeburg.mpg.de/Indo-German-Workshop2020
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/3844
dc.description.abstractMethanol is an essential primary chemical in the chemical industry. Further, there is a growing interest in using methanol also for chemical energy storage. Excess electrical wind or solar energy can be converted to hydrogen and react with CO and CO2 from biogas or waste streams to methanol. Suitable kinetic models are required for designing such processes. Established kinetics need to be extended to account for strongly varying input ratios of H2, CO, and CO2 in such applications leading to the need for dynamic process operation. Kinetic models for methanol synthesis accounting for dynamic changes of the catalyst morphology were proposed recently [1]. For the implementation and evaluation of the dynamic operation, a novel reactor concept, incorporating a micro-berty reactor, is established. The configuration allows the modulation of single and multiple input parameters simultaneously, such as partial pressure, total flow-rate, and total pressure. Periodic variation of the inputs results in fluctuating outputs. For the analysis of these changes, an online mass spectrometer (MS) and a micro-gas chromatograph (GC) are implemented for time-resolved concentration profiles, as well as the analysis of collected samples of multiple fluctuation periods. A set of dynamic experiments is determined by optimal experimental design that improves the parameter sensitivity by solving optimal control problems to identify an optimal parameter set. Additionally, it is analyzed what kind of additional measurement is required for further improvement of the identifiability of the kinetic model [2]. The nonlinear dynamic behavior of the methanol synthesis can be exploited by a forced periodic modulation of different feed streams and total flow-rate (separately of simultaneously) that result in improvements of the time-average output, in comparison to the steady-state process, concerning different objective functions. The nonlinear frequency response (NFR) analysis [3] is used to estimate suitable input variations and the corresponding optimal dynamic parameters (forcing frequency, amplitudes, and phase difference). The NFR method was already applied in various cases [4–6], and it represents promising starting points for rigorous dynamic optimization. The selection of the objective functions for single- and multi-objective optimization of forced periodic operations is critically discussed.en
dc.language.isoensr
dc.relationDFG Priority Programme 2080, SPP 2080 Catalyst and reactors under dynamic conditions for energy storage and conversion, Project: Analysis of forced periodic operation of chemical reactors considering methanol synthesis as an examplesr
dc.rightsrestrictedAccesssr
dc.source4th Indo-German Workshop on Advances in Materials, Reaction& Separation Processes, Berlin, Germanysr
dc.subjectmethanol synthesissr
dc.subjectdynamic operationsr
dc.subjectoptimizationsr
dc.subjectparameter estimationsr
dc.titleOptimization of methanol synthesis under forced dynamic operationen
dc.typeconferenceObjectsr
dc.rights.licenseARRsr
dcterms.abstractСеидел, Царстен; Киенле, Aцхим; Петковска, Менка; Сеидел-Моргенстерн, Aндреас; Фелисцхак, Маттхиас; Николић, Далиборка;
dc.rights.holderMax Planck Institutesr
dc.description.otherPoster award at 4th Indo-German Workshop on Advances in Materials, Reaction & Separation Processes, February 23-26 2020, Berlin, Germanysr
dc.identifier.rcubhttps://hdl.handle.net/21.15107/rcub_cer_3844
dc.type.versionpublishedVersionsr


Dokumenti

Thumbnail

Ovaj dokument se pojavljuje u sledećim kolekcijama

Prikaz osnovnih podataka o dokumentu