ЦЕР - Централни Репозиторијум ИХТМ-а
Институт за хемију, технологију и металургију
    • English
    • Српски
    • Српски (Serbia)
  • Српски (ћирилица) 
    • Енглески
    • Српски (ћирилица)
    • Српски (латиница)
  • Пријава
Преглед рада 
  •   ЦЕР - Централни репозиторијум ИХТМ-а
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Преглед рада
  •   ЦЕР - Централни репозиторијум ИХТМ-а
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Преглед рада
JavaScript is disabled for your browser. Some features of this site may not work without it.

Comparative analysis of length differences between georeference surfaces

Само за регистроване кориснике
2020
Аутори
Borisov, Mirko
Gavrilović, Milan
Sladić, Dubravka
Radulović, Aleksandra
Petrović, Vladimir
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документу
Апстракт
The article deals with the length differences between georeference surfaces within the state coordinate system of Serbia. It’s an analysis starting from the topography, through geoid and ellipsoid, to the map projection. During the literature review, analyses of the length changes from topography to the state map projection for the geographic territory of Serbia were not found. The set of initial data consists DEM and the geoid model, as well as vector data that contain the boundary of the research area. Calculation will be performed on the basis of 88439 points of grids, located at a distance of 1 km, while the analysis will be done by comparing average deformations, extreme deformation values, percentage of positive and negative values of deformations, as well as percentage of length without deformations. The aim of this research is to provide a set of data on length differences that covers the entire territory of Serbia.
Кључне речи:
Length differences / topography / geoid / map projection / ellipsoid
Извор:
Geocarto International, 2020
Издавач:
  • England : Taylor and Francis Ltd.
Напомена:
  • The peer-reviewed version: http://cer.ihtm.bg.ac.rs/handle/123456789/3622

DOI: 10.1080/10106049.2020.1750065

ISSN: 1010-6049; 1752-0762

WoS: 000526340600001

Scopus: 2-s2.0-85083566664
[ Google Scholar ]
URI
http://cer.ihtm.bg.ac.rs/handle/123456789/3574
Колекције
  • Radovi istraživača / Researchers' publications
Институција
IHTM
TY  - JOUR
AU  - Borisov, Mirko
AU  - Gavrilović, Milan
AU  - Sladić, Dubravka
AU  - Radulović, Aleksandra
AU  - Petrović, Vladimir
PY  - 2020
UR  - http://cer.ihtm.bg.ac.rs/handle/123456789/3574
AB  - The article deals with the length differences between georeference
surfaces within the state coordinate system of Serbia. It’s an
analysis starting from the topography, through geoid and ellipsoid,
to the map projection. During the literature review, analyses
of the length changes from topography to the state map projection
for the geographic territory of Serbia were not found. The
set of initial data consists DEM and the geoid model, as well as
vector data that contain the boundary of the research area.
Calculation will be performed on the basis of 88439 points of
grids, located at a distance of 1 km, while the analysis will be
done by comparing average deformations, extreme deformation
values, percentage of positive and negative values of deformations,
as well as percentage of length without deformations. The
aim of this research is to provide a set of data on length differences
that covers the entire territory of Serbia.
PB  - England : Taylor and Francis Ltd.
T2  - Geocarto International
T1  - Comparative analysis of length differences between georeference surfaces
DO  - 10.1080/10106049.2020.1750065
ER  - 
@article{
author = "Borisov, Mirko and Gavrilović, Milan and Sladić, Dubravka and Radulović, Aleksandra and Petrović, Vladimir",
year = "2020",
url = "http://cer.ihtm.bg.ac.rs/handle/123456789/3574",
abstract = "The article deals with the length differences between georeference
surfaces within the state coordinate system of Serbia. It’s an
analysis starting from the topography, through geoid and ellipsoid,
to the map projection. During the literature review, analyses
of the length changes from topography to the state map projection
for the geographic territory of Serbia were not found. The
set of initial data consists DEM and the geoid model, as well as
vector data that contain the boundary of the research area.
Calculation will be performed on the basis of 88439 points of
grids, located at a distance of 1 km, while the analysis will be
done by comparing average deformations, extreme deformation
values, percentage of positive and negative values of deformations,
as well as percentage of length without deformations. The
aim of this research is to provide a set of data on length differences
that covers the entire territory of Serbia.",
publisher = "England : Taylor and Francis Ltd.",
journal = "Geocarto International",
title = "Comparative analysis of length differences between georeference surfaces",
doi = "10.1080/10106049.2020.1750065"
}
Borisov M, Gavrilović M, Sladić D, Radulović A, Petrović V. Comparative analysis of length differences between georeference surfaces. Geocarto International. 2020;
Borisov, M., Gavrilović, M., Sladić, D., Radulović, A.,& Petrović, V. (2020). Comparative analysis of length differences between georeference surfaces.
Geocarto InternationalEngland : Taylor and Francis Ltd...
https://doi.org/10.1080/10106049.2020.1750065
Borisov Mirko, Gavrilović Milan, Sladić Dubravka, Radulović Aleksandra, Petrović Vladimir, "Comparative analysis of length differences between georeference surfaces" (2020),
https://doi.org/10.1080/10106049.2020.1750065 .

DSpace software copyright © 2002-2015  DuraSpace
О Централном репозиторијуму (ЦеР) | Пошаљите запажања

OpenAIRERCUB
 

 

Комплетан репозиторијумИнституцијеАуториНасловиТемеОва институцијаАуториНасловиТеме

Статистика

Преглед статистика

DSpace software copyright © 2002-2015  DuraSpace
О Централном репозиторијуму (ЦеР) | Пошаљите запажања

OpenAIRERCUB