Приказ основних података о документу

dc.creatorMilutinović Nikolić, Aleksandra
dc.creatorPresburger Ulniković, Vladanka
dc.creatorVeličković, Sava
dc.creatorAleksić, Radoslav
dc.date.accessioned2020-04-10T11:35:23Z
dc.date.available2020-04-10T11:35:23Z
dc.date.issued2003
dc.identifier.issn0957-4522
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/3458
dc.description.abstractThe aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with mechanical and dielectric properties that satisfy the quality needed for production of printed circuit boards for microelectronics. Commercial materials: glass woven fabric, different types of silane finish and epoxy resin were starting materials in obtaining composites. The conditions needed for the thermal removal of the original size from glass fabric were investigated. The optimal heat treatment should be performed at temperatures less than 550 оC, while cooling rates should be as slow as possible. In this manner the fabric has less than 0.1% of residual size, and the mechanical properties remain satisfactory. Different types of adhesion promoters based on silanes were applied on heat-treated glass fabric as finishes. The quality of the composite material made of thermally and chemically treated glass fabric and epoxy resin was controlled by measuring the tensile and dielectric strength of composite. Depending on which properties of composite are of main concern, mechanical or dielectric, finish with amino functional group and lower heat treatment temperature or epoxy modified coatings and higher heat treatment temperature should be used for obtaining glass-fabric epoxy resin laminar composites.en
dc.language.isoensr
dc.publisherSpringer Netherlandssr
dc.rightsrestrictedAccesssr
dc.sourceJournal of Materials Science: Materials in Electronicssr
dc.subjectHeat treatmentsr
dc.subjectfinishingsr
dc.subjecttensile strengthsr
dc.subjectdielectric strengthsr
dc.subjectglass-epoxy laminar compositessr
dc.titleThe influence of heat treatment and finishing on the mechanical and dielectric properties of glass fabric-epoxy resin laminar compositesen
dc.typearticlesr
dc.rights.licenseARRsr
dcterms.abstractМилутиновић Николић, Aлександра; Пресбургер Улниковић, Владанка; Величковић, Сава; Aлексић, Радослав;
dc.rights.holderKluwer Academic Publishersr
dc.citation.volume14
dc.citation.issue2
dc.citation.spage75
dc.citation.epage79
dc.citation.rankM22
dc.identifier.doi10.1023/A:1021948502150
dc.identifier.scopus2-s2.0-0037296227
dc.identifier.wos000180452900003
dc.type.versionpublishedVersionsr


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу