Influence of secondary phases in A356 MMCs on their mechanical properties at macro- and nanoscale
Samo za registrovane korisnike
2020
Autori
Vencl, AleksandarBobić, Ilija
Stanković, Miloš
Hvizdoš, Pavol
Bobić, Biljana
Stojanović, Blaža
Franek, Friedrich
Članak u časopisu (Objavljena verzija)
,
Springer
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Metal matrix composites are very inhomogeneous materials, and their properties depend on various parameters (production process, constituents, their interfaces, etc.). The influence of SiC microparticles (40 mu m) reinforcement and graphite macroparticles (200-800 mu m) addition on the mechanical properties of Al-Si A356 alloy, produced by compocasting, has been assessed using macro- and nanoscale measurements of hardness and modulus of elasticity. The Al makes over 90 wt% of the A356 alloy, so the nanoscale measurements were performed on different alpha phase regions on each material (core of alpha phase, eutectic alpha phase, and alpha phase near the phase boundaries alpha phase/secondary phases). The results showed that there is no direct correlation between mechanical properties on macro- and nanoscale. The nanoscale results also showed that the secondary phases (SiC and graphite particles) can have significant effect on the mechanical properties on the atomic level, i.e. in the al...pha phase regions very close to the secondary phases.
Ključne reči:
A356 alloy / Hybrid composites / Compocasting / SiC / Graphite / Hardness / Modulus of elasticityIzvor:
Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2020, 42, 3, 115-Izdavač:
- Springer
Finansiranje / projekti:
- Istraživanje i optimizacija tehnoloških i funkcionalnih performansi ventilacionog mlina termoelektrane Kostolac B (RS-34028)
- Razvoj triboloških mikro/nano dvokomponentnih i hibridnih samopodmazujućih kompozita (RS-35021)
- Uticaj nano i mikrostrukturnih konstituenata na sintezu i karakteristike savremenih kompozitnih materijala sa metalnom osnovom (RS-172005)
- Austrian COMET-Program (Project K2 XTribology, Grant Nos. 824187 and 849109)
- CEEPUS network CIII-BG-0703
- COST Action CA 15102 “Solutions for Critical Raw Materials under Extreme Conditions (CRM-EXTREME)”
DOI: 10.1007/s40430-020-2197-6
ISSN: 1678-5878
WoS: 000513237400001
Scopus: 2-s2.0-85079295084
Institucija/grupa
IHTMTY - JOUR AU - Vencl, Aleksandar AU - Bobić, Ilija AU - Stanković, Miloš AU - Hvizdoš, Pavol AU - Bobić, Biljana AU - Stojanović, Blaža AU - Franek, Friedrich PY - 2020 UR - https://cer.ihtm.bg.ac.rs/handle/123456789/3437 AB - Metal matrix composites are very inhomogeneous materials, and their properties depend on various parameters (production process, constituents, their interfaces, etc.). The influence of SiC microparticles (40 mu m) reinforcement and graphite macroparticles (200-800 mu m) addition on the mechanical properties of Al-Si A356 alloy, produced by compocasting, has been assessed using macro- and nanoscale measurements of hardness and modulus of elasticity. The Al makes over 90 wt% of the A356 alloy, so the nanoscale measurements were performed on different alpha phase regions on each material (core of alpha phase, eutectic alpha phase, and alpha phase near the phase boundaries alpha phase/secondary phases). The results showed that there is no direct correlation between mechanical properties on macro- and nanoscale. The nanoscale results also showed that the secondary phases (SiC and graphite particles) can have significant effect on the mechanical properties on the atomic level, i.e. in the alpha phase regions very close to the secondary phases. PB - Springer T2 - Journal of the Brazilian Society of Mechanical Sciences and Engineering T1 - Influence of secondary phases in A356 MMCs on their mechanical properties at macro- and nanoscale VL - 42 IS - 3 SP - 115 DO - 10.1007/s40430-020-2197-6 ER -
@article{ author = "Vencl, Aleksandar and Bobić, Ilija and Stanković, Miloš and Hvizdoš, Pavol and Bobić, Biljana and Stojanović, Blaža and Franek, Friedrich", year = "2020", abstract = "Metal matrix composites are very inhomogeneous materials, and their properties depend on various parameters (production process, constituents, their interfaces, etc.). The influence of SiC microparticles (40 mu m) reinforcement and graphite macroparticles (200-800 mu m) addition on the mechanical properties of Al-Si A356 alloy, produced by compocasting, has been assessed using macro- and nanoscale measurements of hardness and modulus of elasticity. The Al makes over 90 wt% of the A356 alloy, so the nanoscale measurements were performed on different alpha phase regions on each material (core of alpha phase, eutectic alpha phase, and alpha phase near the phase boundaries alpha phase/secondary phases). The results showed that there is no direct correlation between mechanical properties on macro- and nanoscale. The nanoscale results also showed that the secondary phases (SiC and graphite particles) can have significant effect on the mechanical properties on the atomic level, i.e. in the alpha phase regions very close to the secondary phases.", publisher = "Springer", journal = "Journal of the Brazilian Society of Mechanical Sciences and Engineering", title = "Influence of secondary phases in A356 MMCs on their mechanical properties at macro- and nanoscale", volume = "42", number = "3", pages = "115", doi = "10.1007/s40430-020-2197-6" }
Vencl, A., Bobić, I., Stanković, M., Hvizdoš, P., Bobić, B., Stojanović, B.,& Franek, F.. (2020). Influence of secondary phases in A356 MMCs on their mechanical properties at macro- and nanoscale. in Journal of the Brazilian Society of Mechanical Sciences and Engineering Springer., 42(3), 115. https://doi.org/10.1007/s40430-020-2197-6
Vencl A, Bobić I, Stanković M, Hvizdoš P, Bobić B, Stojanović B, Franek F. Influence of secondary phases in A356 MMCs on their mechanical properties at macro- and nanoscale. in Journal of the Brazilian Society of Mechanical Sciences and Engineering. 2020;42(3):115. doi:10.1007/s40430-020-2197-6 .
Vencl, Aleksandar, Bobić, Ilija, Stanković, Miloš, Hvizdoš, Pavol, Bobić, Biljana, Stojanović, Blaža, Franek, Friedrich, "Influence of secondary phases in A356 MMCs on their mechanical properties at macro- and nanoscale" in Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42, no. 3 (2020):115, https://doi.org/10.1007/s40430-020-2197-6 . .