Show simple item record

dc.creatorManasijević, Dragan
dc.creatorBalanović, Ljubiša
dc.creatorĆosović, Vladan
dc.creatorMinić, Duško
dc.creatorPremović, Milena
dc.creatorGorgievski, Milan
dc.creatorStamenković, Uroš
dc.creatorTalijan, Nadežda M.
dc.date.accessioned2020-02-08T12:34:25Z
dc.date.available2020-02-08T12:34:25Z
dc.date.issued2020
dc.identifier.issn2217-8961
dc.identifier.urihttp://cer.ihtm.bg.ac.rs/handle/123456789/3391
dc.description.abstractThermal properties, including melting temperature, latent heat of melting, specific heat capacity and thermal conductivity, of a low-melting In–Sn–Zn eutectic alloy were investigated in this work. The In–Sn–Zn eutectic alloy with nominal composition 52.7In-44.9Sn-2.4Zn (at.%) was prepared by the melting of pure metals under an argon atmosphere. The conducted assessment consisted of both theoretical and experimental approaches. Differential scanning calorimetry (DSC) was used for the measurement of melting temperature and latent heat, and the obtained results were compared with the results of thermodynamic calculations. The measured melting temperature and the latent heat of melting for the In–Sn–Zn eutectic alloy are 106.5±0.1 °C and 28.3±0.1 Jg-1, respectively. Thermal diffusivity and thermal conductivity of the In–Sn–Zn eutectic alloy were studied by the xenon-flash method. The determined thermal conductivity of the investigated eutectic alloy at 25 °C is 42.2±3.4 Wm-1K-1. Apart from providing insight into the possibility for application of the investigated alloy as the metallic phase-change material, the obtained values of thermal properties can also be utilized as input parameters for various simulation processes such as casting and soldering.
dc.publisherAssociation of Metallurgical Engineers of Serbia
dc.relationinfo:eu-repo/grantAgreement/MESTD/Basic Research (BR or ON)/172037/RS//
dc.rightsopenAccess
dc.sourceMetallurgical and Materials Engineering
dc.subjectIn–Sn–Zn system
dc.subjecteutectic alloy
dc.subjectlatent heat of melting
dc.subjectthermal conductivity
dc.titleThermal characterization of the In–Sn–Zn eutectic alloy
dc.typearticleen
dc.rights.licenseBY
dcterms.abstractГоргиевски, Милан; Талијан, Надежда; Премовић, Милена; Минић, Душко; Ћосовић, Владан; Манасијевић, Драган; Стаменковић, Урош; Балановић, Љубиша;
dc.rights.holderThe Authors
dc.citation.volume25
dc.citation.issue04
dc.citation.spage325
dc.citation.epage334
dc.citation.rankM24~
dc.description.otherDjordje Drobnjak - Memorial Issue
dc.identifier.doi10.30544/456
dc.identifier.fulltexthttp://cer.ihtm.bg.ac.rs/bitstream/id/16029/bitstream_16029.pdf
dc.identifier.scopus2-s2.0-85078519314
dc.type.versionpublishedVersion


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record