Show simple item record

dc.creatorKazasidis, Marios
dc.creatorYin, Shuo
dc.creatorCassidy, Jonathan
dc.creatorVolkov-Husović, Tatjana
dc.creatorVlahović, Milica
dc.creatorMartinović, Sanja
dc.creatorKyriakopoulou, Elena
dc.creatorLupoi, Rocco
dc.date.accessioned2020-01-28T10:29:57Z
dc.date.available2021-11-26
dc.date.issued2020
dc.identifier.issn0257-8972
dc.identifier.urihttp://cer.ihtm.bg.ac.rs/handle/123456789/3387
dc.description.abstractThe cold spray technique was employed in this study to produce pure nickel (Ni) and nickel-Inconel 718 powder deposits on duplex stainless steel substrates. High quality coatings were manufactured using nitrogen as the propellant gas. The coatings exhibited satisfactory Inconel 718 (In718) retention within the Ni matrix due to the highly ductile binder phase necessary for fabrication. The characterization of the coating microstructures was implemented by means of X-ray diffraction, electron microscopy, energy-dispersive X-ray spectroscopy, and microhardness testing. In addition, the erosion resistance of both coatings was evaluated by performing cavitation erosion tests, with the analysis of the eroded surfaces revealing different erosion mechanisms for each coating. The results demonstrated the efficiency of the cold spray technique for use in the production of metal-metal matrix composite coatings and the potential of In718 use in applications which demand enhanced cavitation erosion resistance.en
dc.publisherElsevier BVen
dc.relationSchuF Valve Technology GmbH : IP2018 0730en
dc.relationinfo:eu-repo/grantAgreement/MESTD/Integrated and Interdisciplinary Research (IIR or III)/45012/RS//en
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/33007/RS//en
dc.rightsembargoedAccess
dc.sourceSurface and Coatings Technologyen
dc.subjectCold spray
dc.subjectNickel
dc.subjectInconel 718
dc.subjectCavitation erosion
dc.subjectCoating
dc.titleMicrostructure and cavitation erosion performance of nickel-Inconel 718 composite coatings produced with cold sprayen
dc.typearticleen
dc.rights.licenseARR
dcterms.abstractКазасидис, Мариос; Yин, Схуо; Цассидy, Јонатхан; Влаховић, Милица; Мартиновић, Сања; Кyриакопоулоу, Елена; Лупои, Роццо; Волков-Хусовић, Татјана;
dc.rights.holderElsevier
dc.citation.volume382
dc.citation.spage125195
dc.citation.rankM21~
dc.description.otherThis is the peer-reviewed version of the article: Surface and Coatings Technology, 2020, 382, 125195, [https://doi.org/10.1016/j.surfcoat.2019.125195]
dc.description.otherThe published version: [http://cer.ihtm.bg.ac.rs/handle/123456789/3274]
dc.identifier.doi10.1016/j.surfcoat.2019.125195
dc.identifier.scopus2-s2.0-85076004015
dc.identifier.wos000509631200007
dc.type.versionacceptedVersion


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record