Show simple item record

dc.creatorPantović Pavlović, Marijana
dc.creatorEraković, Sanja
dc.creatorPavlović, Miroslav M.
dc.creatorVeselinović, Ljiljana
dc.creatorStevanović, Jasmina
dc.creatorPanić, Vladimir
dc.creatorIgnjatović, Nenad
dc.date.accessioned2019-06-06T07:29:01Z
dc.date.accessioned2020-01-12T21:50:27Z
dc.date.available2019-06-06T07:29:01Z
dc.date.available2020-01-12T21:50:27Z
dc.date.issued2019
dc.identifier.isbn978-953-56942-7-4
dc.identifier.urihttp://dais.sanu.ac.rs/123456789/6244
dc.identifier.urihttp://cer.ihtm.bg.ac.rs/handle/123456789/3335
dc.description.abstractThe medical devices based on titanium and its alloys are widely used in the repair and replacement of a degraded or inhibited func-tion of locomotor system [1]. Ti and its alloys exhibit high mechanical strength, good workability, resistant to corrosion and low cost. Although, they are widely used as orthopedic and dental implants their inability to interact with living tissue will inhibit their biological fixation and osseoin-tegration [2]. Therefore, to improve the hard-tissue compatibility of Ti various sur-face treatments have been developed for the inorganic coating formation [3]. The hyd-roxyapatite (HAp, Ca10(PO4)6(OH)2) with superior osteogenic activity is a competitive approach to make novel coatings for titanium implants applications. HAp is a calcium phosphate very similar to the inorganic part of the human bone and hard tissues both in morphology and compo-sition. Herein, in-situ synthesis of HAp/TiO2 coating on titanium was performed via ana-phoretic deposition of HAp and simulta-neous anodization of Ti to produce highly adherent and strengthened composite coating. It can be seen that morphology of Ti substrate of anHAP/TiO2 coating is of tubular shape, and tube formation occurs mainly due to competing processes of anodization and electrophoretic deposition of HAp. anHAp/TiO2 coating does not need sintering process, and simultaneous Ti anodization and HAp deposition occur, where HAp crystals incorporate in the anodized Ti surface. From the presented results it can be concluded that novel suggested process of in situ simultaneous anHAp/TiO2 deposition with Ti surface anodization gives much better results that cathaphoretic deposition regarding adhesion.sr
dc.language.isoensr
dc.publisherInternational Association of Physical Chemistssr
dc.relationinfo:eu-repo/grantAgreement/MESTD/Basic Research (BR or ON)/172060/RS//sr
dc.rightsopenAccesssr
dc.sourceBook of abstracts / 7th Regional Symposium on Electrochemistry – South East Europe & 8th Kurt Schwabe Symposium, Split, Croatia, May 27-30, 2019sr
dc.subjecttitanium implantssr
dc.subjecthydroxyapatitesr
dc.subjecttitanium oxidesr
dc.subjectcoatingssr
dc.titleSurface modification of titanium implants by adherent hydroxyapatite/titanium oxide composite coatings using novel in-situ synthesissr
dc.typeconferenceObjectsr
dc.rights.licenseBY-NC-NDsr
dcterms.abstractПантовић Павловић, Маријана Р.; Павловић, Мирослав М.; Ераковић, Сања Г.; Веселиновић, Љиљана; Стевановић, Јасмина С.; Панић, Владимир В.; Игњатовић, Ненад;
dc.citation.spage120
dc.citation.epage120
dc.identifier.fulltexthttp://cer.ihtm.bg.ac.rs/bitstream/id/15861/bitstream_15861.pdf
dc.type.versionpublishedVersionsr


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record