Show simple item record

dc.creatorPantović Pavlović, Marijana
dc.creatorPavlović, Miroslav M.
dc.creatorEraković, Sanja
dc.creatorBarudžija, Tanja
dc.creatorStevanović, Jasmina
dc.creatorIgnjatović, Nenad
dc.creatorPanić, Vladimir
dc.date.accessioned2020-01-12T21:11:29Z
dc.date.available2020-01-12T21:11:29Z
dc.date.issued2019
dc.identifier.issn1820-7421
dc.identifier.urihttps://www.shd-pub.org.rs/index.php/JSCS/article/view/8524
dc.identifier.urihttp://dais.sanu.ac.rs/123456789/6916
dc.identifier.urihttp://cer.ihtm.bg.ac.rs/handle/123456789/3327
dc.description.abstractThe optimization of the anodization process of Ti substrate for in situ synthesis of hydroxyapatite/titanium oxide composite coatings on titanium substrate was accomplished. The anodization was performed under 30, 60 and 90 V cell voltage, and the morphology of treated surface, as well as linear and surface roughness, were analysed by field emission-scanning electron micro­scopy, atomic force microscopy and roughness tester. It was shown by linear and surface roughness analyses that titanium anodized under 60 V has the high­est roughness, whereas at 90 V the flattening of the surface occurs. As the highest surface roughness results emerged at 60 V, the novel process of com­po­site anHAp/TiO2 coating synthesis, which comprises simultaneous processes of TiO2 formation and HAp deposition, as well as HAp impregnation within TiO2 surface layer, was performed at this voltage. Ti substrate surface was completely covered by composite coating, with no visible cracks. The adhesion quantified according to ASTM D3359-02 standard is considerably improved with respect to the coatings obtained by cathaphoretic processes, with no need of subsequent sintering.
dc.languageen
dc.publisherSerbian Chemical Society
dc.relationinfo:eu-repo/grantAgreement/MESTD/Basic Research (BR or ON)/172060/RS//
dc.rightsopenAccess
dc.sourceJournal of the Serbian Chemical Society
dc.subjectadhesion
dc.subjecthyd-roxyapatite coating
dc.subjectin situ anaphoretic deposition
dc.subjectroughness
dc.subjecttitanium anodization
dc.subjecttitanium oxide.
dc.titleRelationship between the properties of an interlayer formed by in situ Ti anodization and anaphoretically deposited hydroxyapatite
dc.typearticleen
dc.rights.licenseBY-NC-ND
dcterms.abstractЕраковић, Сања; Стевановић, Јасмина С.; Пантовић Павловић, Маријана Р.; Игњатовић, Ненад; Панић, Владимир В.; Баруджија, Тања; Павловић, Мирослав М.;
dc.citation.volume84
dc.citation.issue11
dc.citation.spage1305
dc.citation.epage1318
dc.citation.rankM23
dc.identifier.doi10.2298/JSC190730105P
dc.identifier.fulltexthttp://cer.ihtm.bg.ac.rs/bitstream/id/15827/8524-48924-4-PB.pdf
dc.identifier.scopus2-s2.0-85076257517
dc.identifier.wos000500748300010
dc.type.versionpublishedVersion


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record