Metastabile nanopowder ZnTiO3 pressed into cylindrical compacts at 200 MPa was submitted to conventional heating with isothermal holding at 931oC for 10 minutes, 25 minutes and 40 minutes. Same compacts were heated with two-step sintering schedule with maximal 912oC and isothermal holding at 896oC, for approximately the same holding times as with isothermal. Shrinkage during heating was monitored with dilatometric device, while microstructure was determined with atomic force microscopy. XRD patterns were collected for the most prominent samples. Sintered specimens microstructure showed differences introduced during last sintering stage by two heating schedules.
Keywords:
ZnTiO3 / nanopowders / two-step sintering
Source:
Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia, 2015, 101-101
Publisher:
Belgrade : Institute for Multidisciplinary Research, University of Belgrade
TY - CONF
AU - Vasiljević, Zorka
AU - Vasiljević-Radović, Dana
AU - Nikolić, Maria Vesna
AU - Labus, Nebojša
PY - 2015
UR - http://dais.sanu.ac.rs/123456789/15426
UR - http://cer.ihtm.bg.ac.rs/handle/123456789/2865
AB - Metastabile nanopowder ZnTiO3 pressed into cylindrical compacts at 200 MPa was submitted to conventional heating with isothermal holding at 931oC for 10 minutes, 25 minutes and 40 minutes. Same compacts were heated with two-step sintering schedule with maximal 912oC and isothermal holding at 896oC, for approximately the same holding times as with isothermal. Shrinkage during heating was monitored with dilatometric device, while microstructure was determined with atomic force microscopy. XRD patterns were collected for the most prominent samples. Sintered specimens microstructure showed differences introduced during last sintering stage by two heating schedules.
PB - Belgrade : Institute for Multidisciplinary Research, University of Belgrade
C3 - Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia
T1 - Two step sintering of the ZnTiO3 nanopowder
SP - 101
EP - 101
ER -
@conference{
author = "Vasiljević, Zorka and Vasiljević-Radović, Dana and Nikolić, Maria Vesna and Labus, Nebojša",
year = "2015",
url = "http://dais.sanu.ac.rs/123456789/15426, http://cer.ihtm.bg.ac.rs/handle/123456789/2865",
abstract = "Metastabile nanopowder ZnTiO3 pressed into cylindrical compacts at 200 MPa was submitted to conventional heating with isothermal holding at 931oC for 10 minutes, 25 minutes and 40 minutes. Same compacts were heated with two-step sintering schedule with maximal 912oC and isothermal holding at 896oC, for approximately the same holding times as with isothermal. Shrinkage during heating was monitored with dilatometric device, while microstructure was determined with atomic force microscopy. XRD patterns were collected for the most prominent samples. Sintered specimens microstructure showed differences introduced during last sintering stage by two heating schedules.",
publisher = "Belgrade : Institute for Multidisciplinary Research, University of Belgrade",
journal = "Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia",
title = "Two step sintering of the ZnTiO3 nanopowder",
pages = "101-101"
}
Vasiljević, Z., Vasiljević-Radović, D., Nikolić, M. V.,& Labus, N. (2015). Two step sintering of the ZnTiO3 nanopowder.
Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia
Belgrade : Institute for Multidisciplinary Research, University of Belgrade., 101-101.
Vasiljević Z, Vasiljević-Radović D, Nikolić MV, Labus N. Two step sintering of the ZnTiO3 nanopowder. Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia. 2015;:101-101
Vasiljević Zorka, Vasiljević-Radović Dana, Nikolić Maria Vesna, Labus Nebojša, "Two step sintering of the ZnTiO3 nanopowder" Programme and the Book of Abstracts / 3rd Conference of the Serbian Society for Ceramic Materials, 3CSCS-2015, June 15-17, 2015, Belgrade, Serbia (2015):101-101
