This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. It was observed, that anodes with O2 content lower than 200 ppm, were not passivated. Results, obtained using the standard electrochemical techniques, have indicated that the anodes with non-standard chemical composition could be used under the same conditions as well as in the conventional copper refining process.
TY - CONF
AU - Marković, Radmila
AU - Jugović, Branimir
AU - Gvozdenović, Milica M.
AU - Stevanović, Jasmina
AU - Stevanović, Z.
AU - Bugarin, Mile
PY - 2011
UR - http://dais.sanu.ac.rs/123456789/551
UR - http://cer.ihtm.bg.ac.rs/handle/123456789/2617
AB - This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. It was observed, that anodes with O2 content lower than 200 ppm, were not passivated. Results, obtained using the standard electrochemical techniques, have indicated that the anodes with non-standard chemical composition could be used under the same conditions as well as in the conventional copper refining process.
PB - Tatranské Matliare : Slovak Society of Chemical Engineering
C3 - Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
T1 - Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment
SP - 972
EP - 975
ER -
@conference{
author = "Marković, Radmila and Jugović, Branimir and Gvozdenović, Milica M. and Stevanović, Jasmina and Stevanović, Z. and Bugarin, Mile",
year = "2011",
url = "http://dais.sanu.ac.rs/123456789/551, http://cer.ihtm.bg.ac.rs/handle/123456789/2617",
abstract = "This paper addresses on investigation the possibility of electrolytic treatment the sulphur acidic waste solution, obtained in the conventional electrolytic copper refining process. The copper anodes with non-standard nickel, lead, tin and antimony content were specially prepared for the refining process. Nickel content of all anodes was approximately 7.5 mass %, and the content of lead, tin and antimony was varied. It was observed, that anodes with O2 content lower than 200 ppm, were not passivated. Results, obtained using the standard electrochemical techniques, have indicated that the anodes with non-standard chemical composition could be used under the same conditions as well as in the conventional copper refining process.",
publisher = "Tatranské Matliare : Slovak Society of Chemical Engineering",
journal = "Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering",
title = "Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment",
pages = "972-975"
}
Marković, R., Jugović, B., Gvozdenović, M. M., Stevanović, J., Stevanović, Z.,& Bugarin, M. (2011). Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment.
Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering
Tatranské Matliare : Slovak Society of Chemical Engineering., 972-975.
Marković R, Jugović B, Gvozdenović MM, Stevanović J, Stevanović Z, Bugarin M. Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment. Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering. 2011;:972-975
Marković Radmila, Jugović Branimir, Gvozdenović Milica M., Stevanović Jasmina, Stevanović Z., Bugarin Mile, "Analyzing the corrosion characteristics of anodes used for the sulphur acidic waste water treatment" Proceedings of the 38th International Conference of Slovak Society of Chemical Engineering (2011):972-975
