ЦЕР - Централни Репозиторијум ИХТМ-а
Институт за хемију, технологију и металургију
    • English
    • Српски
    • Српски (Serbia)
  • Српски (ћирилица) 
    • Енглески
    • Српски (ћирилица)
    • Српски (латиница)
  • Пријава
Преглед рада 
  •   ЦЕР - Централни репозиторијум ИХТМ-а
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Преглед рада
  •   ЦЕР - Централни репозиторијум ИХТМ-а
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Преглед рада
JavaScript is disabled for your browser. Some features of this site may not work without it.

Reduction of carbon monoxide emission from a solid-fuel thermo-accumulation furnace

Thumbnail
2006
246.pdf (459.2Kb)
Аутори
Dakić, Dragoljub
Belošević, Srđan
Mladenović, Rastko
Paprika, Milijana
Đurović, Dejan
Erić, Aleksandar
Komatina, Mirko
Grbić, Boško
Radić, Nenad
Чланак у часопису (Објављена верзија)
Метаподаци
Приказ свих података о документу
Апстракт
Many households in Serbia, using electric thermo-accumulation furnaces for heating, have been forced to find an alternative solution, due to a significant increase in electricity prices during the last decade. A possible solution is replacing electric heating appliances with the solid fuel-fired ones. A prototype of a new concept of thermo-accumulation solid fuel-fired furnace has been developed to meet these growing needs, providing electricity saving together with considerable environmental benefits. Two strategies for reduction of carbon monoxide emission are examined in the paper: application of Pt/Al2O3 catalyst, in the form of 3 ± 0.3 mm spheres, providing further combustion of flue gases within the furnace, as well as an additional emission reduction by means of the air excess control. Experimental investigations of the catalyst influence on the conversion of carbon monoxide have been done for different operation regimes and positions of the catalyst. The paper presents selected... results regarding carbon monoxide emission during wood and coal combustion. Investigations suggest a considerable effect of the catalyst and a strong influence of the catalyst position within the furnace to carbon monoxide emission reduction. In addition, experimental tests have been conducted to asses the effect of the air excess control in the furnace on carbon monoxide emission. The amount of combustion air, the flue gas flow rate, and the fuel feeding regime have been adjusted in order to keep the flue gas oxygen content in a relatively narrow range, thus obtaining controlled combustion conditions and lower carbon monoxide emission. In this way, the furnace has been made able to respond to the changes in heating needs, fuel quality and other parameters, which is advantageous in comparison with similar solid-fuel fired furnaces.

Кључне речи:
thermo-accumulation furnace / solid fuel / emission reduction / catalyst / air excess control
Извор:
Thermal Science, 2006, 10, 4, 107-119
Издавач:
  • VINCA Institute of Nuclear Sciences

DOI: 10.2298/TSCI0604107D

ISSN: 0354-9836

[ Google Scholar ]
URI
http://cer.ihtm.bg.ac.rs/handle/123456789/248
Колекције
  • Radovi istraživača / Researchers' publications
Институција
IHTM

DSpace software copyright © 2002-2015  DuraSpace
О Централном репозиторијуму (ЦеР) | Пошаљите запажања

OpenAIRERCUB
 

 

Комплетан репозиторијумИнституцијеАуториНасловиТемеОва институцијаАуториНасловиТеме

Статистика

Преглед статистика

DSpace software copyright © 2002-2015  DuraSpace
О Централном репозиторијуму (ЦеР) | Пошаљите запажања

OpenAIRERCUB