CER - Centralni Repozitorijum IHTM-a
Institut za hemiju, tehnologiju i metalurgiju
    • English
    • Српски
    • Српски (Serbia)
  • Srpski (latinica) 
    • Engleski
    • Srpski (ćirilica)
    • Srpski (latinica)
  • Prijava
Pregled zapisa 
  •   CER
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Pregled zapisa
  •   CER
  • IHTM
  • Radovi istraživača / Researchers' publications
  • Pregled zapisa
JavaScript is disabled for your browser. Some features of this site may not work without it.

Optimization of a nanoparticle ball milling process parameters using the response surface method

Samo za registrovane korisnike
2018
Autori
Petrović, Srđan
Rožić, Ljiljana
Jović, Vesna
Stojadinović, Stevan
Grbić, Boško
Radić, Nenad
Lamovec, Jelena
Vasilić, Rastko
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentu
Apstrakt
Nanocrystalline TiO2-CeO2 powders were synthesized from their TiO2 and CeO2 oxides using mechanical ball milling process. The response surface method is applied to identify optimal parameters for the synthesis of TiO2-CeO2 photocatalyst. Analysis of variance and main effect plot are used to determine the significant parameters and set the optimal level for each parameter. Regression analysis showed good agreement of experimental data with the second-order polynomial model with a coefficients of determination: R-2 = 0.991, R-Adj(2). = 0.940 and R-Pred(2). = 0.983. Under optimal experimental conditions of TiO2:CeO2 weight percentage ratio 71: 29, milling speed 200 rpm, and milling time 115 min the highest photodegradation efficiency was achieved. On the basis of the above statistical analysis, it was found that the band gap energy of TiO2-CeO2 nanoparticles decreases with the increase of the milling speed and milling time with constant TiO2:CeO2 weight percentage ratio. Obtained results ...suggest that mechanical ball milling process is a rapid, efficient and low energy consumption method to synthesize TiO2-CeO2 photocatalyst.

Ključne reči:
TiO2-CeO(2)nanopowder / Planetary ball milling / Response surface methodology / Photocatalytic degradation
Izvor:
Advanced Powder Technology, 2018, 29, 9, 2129-2139
Izdavač:
  • Elsevier
Finansiranje / projekti:
  • Dinamika nelinearnih fizičkohemijskih i biohemijskih sistema sa modeliranjem i predviđanjem njihovih ponašanja pod neravnotežnim uslovima (RS-172015)
  • Proučavanje fizičkohemijskih i biohemijskih procesa u životnoj sredini koji utiču na zagađenje i istraživanje mogućnosti za minimiziranje posledica (RS-172001)
  • Razvoj efikasnijih hemijsko-inženjerskih procesa zasnovan na istraživanjima fenomena prenosa i principima intenzifikacije procesa (RS-172022)
  • Racionalni dizajn i sinteza biološki aktivnih i koordinacionih jedinjenja i funkcionalnih materijala, relevantnih u (bio)nanotehnologiji (RS-172035)
  • Hemijsko i strukturno dizajniranje nanomaterijala za primenu u medicini i inženjerstvu tkiva (RS-172026)
  • Mikro, nano-sistemi i senzori za primenu u elektroprivredi, procesnoj industriji i zaštiti životne sredine (RS-32008)

DOI: 10.1016/j.apt.2018.05.021

ISSN: 0921-8831

WoS: 000437308300018

Scopus: 2-s2.0-85047783874
[ Google Scholar ]
26
17
URI
https://cer.ihtm.bg.ac.rs/handle/123456789/2454
Kolekcije
  • Radovi istraživača / Researchers' publications
Institucija/grupa
IHTM
TY  - JOUR
AU  - Petrović, Srđan
AU  - Rožić, Ljiljana
AU  - Jović, Vesna
AU  - Stojadinović, Stevan
AU  - Grbić, Boško
AU  - Radić, Nenad
AU  - Lamovec, Jelena
AU  - Vasilić, Rastko
PY  - 2018
UR  - https://cer.ihtm.bg.ac.rs/handle/123456789/2454
AB  - Nanocrystalline TiO2-CeO2 powders were synthesized from their TiO2 and CeO2 oxides using mechanical ball milling process. The response surface method is applied to identify optimal parameters for the synthesis of TiO2-CeO2 photocatalyst. Analysis of variance and main effect plot are used to determine the significant parameters and set the optimal level for each parameter. Regression analysis showed good agreement of experimental data with the second-order polynomial model with a coefficients of determination: R-2 = 0.991, R-Adj(2). = 0.940 and R-Pred(2). = 0.983. Under optimal experimental conditions of TiO2:CeO2 weight percentage ratio 71: 29, milling speed 200 rpm, and milling time 115 min the highest photodegradation efficiency was achieved. On the basis of the above statistical analysis, it was found that the band gap energy of TiO2-CeO2 nanoparticles decreases with the increase of the milling speed and milling time with constant TiO2:CeO2 weight percentage ratio. Obtained results suggest that mechanical ball milling process is a rapid, efficient and low energy consumption method to synthesize TiO2-CeO2 photocatalyst.
PB  - Elsevier
T2  - Advanced Powder Technology
T1  - Optimization of a nanoparticle ball milling process parameters using the response surface method
VL  - 29
IS  - 9
SP  - 2129
EP  - 2139
DO  - 10.1016/j.apt.2018.05.021
ER  - 
@article{
author = "Petrović, Srđan and Rožić, Ljiljana and Jović, Vesna and Stojadinović, Stevan and Grbić, Boško and Radić, Nenad and Lamovec, Jelena and Vasilić, Rastko",
year = "2018",
abstract = "Nanocrystalline TiO2-CeO2 powders were synthesized from their TiO2 and CeO2 oxides using mechanical ball milling process. The response surface method is applied to identify optimal parameters for the synthesis of TiO2-CeO2 photocatalyst. Analysis of variance and main effect plot are used to determine the significant parameters and set the optimal level for each parameter. Regression analysis showed good agreement of experimental data with the second-order polynomial model with a coefficients of determination: R-2 = 0.991, R-Adj(2). = 0.940 and R-Pred(2). = 0.983. Under optimal experimental conditions of TiO2:CeO2 weight percentage ratio 71: 29, milling speed 200 rpm, and milling time 115 min the highest photodegradation efficiency was achieved. On the basis of the above statistical analysis, it was found that the band gap energy of TiO2-CeO2 nanoparticles decreases with the increase of the milling speed and milling time with constant TiO2:CeO2 weight percentage ratio. Obtained results suggest that mechanical ball milling process is a rapid, efficient and low energy consumption method to synthesize TiO2-CeO2 photocatalyst.",
publisher = "Elsevier",
journal = "Advanced Powder Technology",
title = "Optimization of a nanoparticle ball milling process parameters using the response surface method",
volume = "29",
number = "9",
pages = "2129-2139",
doi = "10.1016/j.apt.2018.05.021"
}
Petrović, S., Rožić, L., Jović, V., Stojadinović, S., Grbić, B., Radić, N., Lamovec, J.,& Vasilić, R.. (2018). Optimization of a nanoparticle ball milling process parameters using the response surface method. in Advanced Powder Technology
Elsevier., 29(9), 2129-2139.
https://doi.org/10.1016/j.apt.2018.05.021
Petrović S, Rožić L, Jović V, Stojadinović S, Grbić B, Radić N, Lamovec J, Vasilić R. Optimization of a nanoparticle ball milling process parameters using the response surface method. in Advanced Powder Technology. 2018;29(9):2129-2139.
doi:10.1016/j.apt.2018.05.021 .
Petrović, Srđan, Rožić, Ljiljana, Jović, Vesna, Stojadinović, Stevan, Grbić, Boško, Radić, Nenad, Lamovec, Jelena, Vasilić, Rastko, "Optimization of a nanoparticle ball milling process parameters using the response surface method" in Advanced Powder Technology, 29, no. 9 (2018):2129-2139,
https://doi.org/10.1016/j.apt.2018.05.021 . .

DSpace software copyright © 2002-2015  DuraSpace
O Centralnom repozitorijumu (CeR) | Pošaljite zapažanja

re3dataOpenAIRERCUB
 

 

Kompletan repozitorijumInstitucije/grupeAutoriNasloviTemeOva institucijaAutoriNasloviTeme

Statistika

Pregled statistika

DSpace software copyright © 2002-2015  DuraSpace
O Centralnom repozitorijumu (CeR) | Pošaljite zapažanja

re3dataOpenAIRERCUB