Приказ основних података о документу

dc.creatorJegdić, Bore
dc.creatorBobić, Biljana
dc.creatorRadojković, Bojana
dc.creatorAlić, Behar
dc.date.accessioned2019-01-30T17:58:58Z
dc.date.available2019-01-30T17:58:58Z
dc.date.issued2018
dc.identifier.issn0947-5117
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/2363
dc.description.abstractThe resistance to pitting and intergranular corrosion of the welded joint of X5CrNi18-10 austenitic stainless steel is analyzed in this paper. The resistance of the welded joint to intergranular corrosion does not depend on the nitrogen content in the shielding gas. It depends on the heat input into the welded joint, that is, on the welding current intensity. The resistance to pitting corrosion depends on the content of nitrogen in the shielding gas and on the welding current intensity. With the increase in the nitrogen content in the shielding gas, the resistance of the heat affected zone (HAZ) to pitting corrosion increases. The welding current intensity (heat input into the welded joint) shows two opposite effects. On the one hand, the increase of the heat input into the welded joint causes a more intensive precipitation of chromium carbides along the grain boundaries, which then leads to depletion in chromium of the grain boundary areas. The sensitization degree of the HAZ is thus increased and the formation of pits easier. On the other hand, with the increase in the welding current intensity, diffusion of nitrogen from the weld metal into the HAZ is facilitated, which contributes to the increased HAZ resistance to pitting corrosion. Possible mechanisms for increasing the HAZ resistance to pitting corrosion in the presence of nitrogen are also considered.en
dc.publisherWiley
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/34028/RS//
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/35021/RS//
dc.rightsrestrictedAccess
dc.sourceMaterials and Corrosion-Werkstoffe Und Korrosion
dc.subjectintergranular corrosionen
dc.subjectpitting corrosionen
dc.subjectstainless steelsen
dc.subjecttest methodsen
dc.subjectwelded jointen
dc.titleInfluence of the welding current intensity and nitrogen content on the corrosion resistance of austenitic stainless steelsen
dc.typearticle
dc.rights.licenseARR
dcterms.abstractAлић, Бехар; Бобић, Биљана; Радојковић, Бојана; Јегдић, Боре;
dc.citation.volume69
dc.citation.issue12
dc.citation.spage1758
dc.citation.epage1769
dc.citation.other69(12): 1758-1769
dc.citation.rankM22
dc.identifier.doi10.1002/maco.201810182
dc.identifier.scopus2-s2.0-85050868975
dc.identifier.wos000452197200007
dc.type.versionpublishedVersion


Документи

Thumbnail

Овај документ се појављује у следећим колекцијама

Приказ основних података о документу