Show simple item record

dc.creatorVidojković, Sonja
dc.creatorRakin, Marko P.
dc.date.accessioned2019-01-30T17:56:26Z
dc.date.available2019-01-30T17:56:26Z
dc.date.issued2017
dc.identifier.issn0001-8686
dc.identifier.urihttp://cer.ihtm.bg.ac.rs/handle/123456789/2246
dc.description.abstractDeposits and scales formed on heat transfer surfaces in power plant water/steam circuits have a significant negative impact on plant reliability, availability and performance, causing tremendous economic consequences and subsequent increases in electricity cost. Consequently, the improvement of the understanding of deposition mechanisms on power generating surfaces is defined as a high priority in the power industry. The deposits consist principally of iron oxides, which are steel corrosion products and usually present in colloidal form. Magnetite (Fe3O4) is the predominant and most abundant compound found in water/steam cycles of all types of power plants. The crucial factor that governs the deposition process and influences the deposition rate of magnetite is the electrostatic interaction between the metal wall surfaces and the suspended colloidal particles. However, there is scarcity of data on magnetite surface properties at elevated temperatures due to difficulties in their experimental measurement. In this paper a generalized overview of existing experimental data on surface characteristics of magnetite at high temperatures is presented with particular emphasis on possible application in the power industry. A thorough analysis of experimental techniques, mathematical models and results has been performed and directions for future investigations have been considered. The state-of-the-art assessment showed that for the characterization of magnetite/aqueous electrolyte solution interface at high temperatures acid-base potentiometric titrations and electrophoresis were the most beneficial and dependable techniques which yielded results up to 290 and 200 degrees C, respectively. Mass titrations provided data on magnetite surface charge up to 320 degrees C, however, this technique is highly sensitive to the minor concentrations of impurities present on the surface of particle. Generally, fairly good correlation between the isoelectric point (pH(iep)) and point of zero charge (pH(pzc)) values has been obtained. All obtained results showed that the surface of magnetite particles is negatively charged in typical high temperature thermal power plant water, which indicates the low probability of aggregation and deposition on plant metal surfaces. The results also gave strong evidence on decline of pHiep and pHpzc with temperature in the same manner as neutral pH of water. The thermodynamic parameters of magnetite surface protonation reactions were in good agreement with each other and obtained using one site/two pK and mainly one site/one pK model. All collected data provided evidences for interaction between particles, probability of deposition and eventual attachment to the steel surface at various pH and temperatures and can serve as a foundation for future surface studies aimed at optimizing plant performances and reducing of magnetite deposition. In future works it would be indispensable to provide the surface experimental data for extended temperature ranges, typical solution chemistries and metal surfaces of power plant structural components and thus obtain entire set of results useful in modeling the surface behavior and control of deposition process in power reactors and thermal plant circuits. Moreover, the acquired results will be applicable and greatly valuable to all other types of power plants, industrial facilities and technological processes using the high temperature water medium.en
dc.publisherElsevier Science Bv, Amsterdam
dc.relationinfo:eu-repo/grantAgreement/MESTD/Integrated and Interdisciplinary Research (IIR or III)/43009/RS//
dc.rightsrestrictedAccess
dc.sourceAdvances in Colloid and Interface Science
dc.subjectMagnetiteen
dc.subjectSurface propertiesen
dc.subjectHigh temperatureen
dc.subjectDepositsen
dc.titleSurface properties of magnetite in high temperature aqueous electrolyte solutions: A reviewen
dc.typearticle
dc.rights.licenseARR
dcterms.abstractРакин, Марко П.; Видојковић, Соња;
dc.citation.volume245
dc.citation.spage108
dc.citation.epage129
dc.citation.other245: 108-129
dc.citation.rankM21
dc.identifier.pmid28434531
dc.identifier.doi10.1016/j.cis.2016.08.008
dc.identifier.rcubConv_3743
dc.identifier.scopus2-s2.0-85018649675
dc.identifier.wos000403540400008
dc.type.versionpublishedVersion


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record