Show simple item record

dc.creatorKozić, M.
dc.creatorRistić, Slavica S.
dc.creatorKatavic, B.
dc.creatorJegdić, Bore
dc.creatorPrvulović, M.
dc.creatorProkolab, M.
dc.creatorLinić, Suzana
dc.date.accessioned2019-01-30T17:55:49Z
dc.date.available2019-01-30T17:55:49Z
dc.date.issued2017
dc.identifier.issn1451-3749
dc.identifier.urihttps://cer.ihtm.bg.ac.rs/handle/123456789/2216
dc.description.abstractNumerical simulation of 3D multiphase flow is performed to determine the velocity field in the fan mill. The mixture model of the Euler-Euler approach is used. Recirculating gas is a primary phase that carries granular phases including the coal powder and sand. The latter causes heavy wear of mill impact plates. The optimal form of hardfacing geometry and technology has an impact both on velocity magnitude and direction of flow in such a way as to reduce plate wear. This paper presents results of surface modification (based on numerical simulation), implemented on impact plates of the fan mill in the Kostolac B power plant in Serbia. Fishbone hardfacing is made in order to increase the lifetime of impact plates and extend the period between overhauls of fan mills. The experimental tests of fishbone surfacing plates, in exploitation conditions, show that the applied modification, hardfacing technologies and coating materials, give expected results. The application of this hardfacing in the form of a fishbone is simpler, faster and more economical compared to complete overlaying and honeycomb impact plate surfacing. The relative weight loss of base plate after an 1440-hour period of exploitation is 8%, while the weight losses for the hard-faced plate is below 7%.en
dc.publisherSociety for Structural Integrity and Life, Institute for Material Testing
dc.relationinfo:eu-repo/grantAgreement/MESTD/Technological Development (TD or TR)/34028/RS//
dc.rightsopenAccess
dc.rights.urihttps://creativecommons.org/licenses/by-nc-nd/4.0/
dc.sourceStructural Integrity and Life
dc.subjectCFDen
dc.subjectFan millen
dc.subjectMultiphase flowen
dc.subjectThermal power planten
dc.subjectWearen
dc.titleWear resistance improvement of thermal plant fan mill impact plates based on numerical flow simulationen
dc.typearticle
dc.rights.licenseBY-NC-ND
dcterms.abstractРистић, С.; Јегдић, Боре; Линић, С.; Проколаб, М.; Првуловић, М.; Катавиц, Б.; Козић, М.;
dc.citation.volume17
dc.citation.issue3
dc.citation.spage221
dc.citation.epage228
dc.citation.other17(3): 221-228
dc.citation.rankM24
dc.identifier.rcubhttps://hdl.handle.net/21.15107/rcub_cer_2216
dc.identifier.fulltexthttps://cer.ihtm.bg.ac.rs/bitstream/id/14692/221-IVK3-2017-MK-SR-BK-BJ-MP-MP-SL.pdf
dc.identifier.scopus2-s2.0-85041078225
dc.type.versionpublishedVersion


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record