Претраживање
Приказ резултата 1-5 од 5
Phase equilibria investigation and characterization of the Au-In-Sb system
(Metalurgija, 2007)
The Au-In-Sb system belongs to the group of potential candidates for lead-free solder materials. The results of phase equilibria investigation and characterization of the alloys in the Au-In-Sb section are presented in ...
Phase composition, structure and magnetic behaviour of low neodymium Nd-Fe-B permanent magnets
(Metalurgija, 2007)
Phase composition, structure and magnetic behaviour of two low neodymium hard magnetic materials differing in way of preparation, centrifugal atomization and melt spinning, were compared using Mössbauer spectroscopy, X-ray ...
Study of microstructure and magnetic properties of optimally annealed R/Q Nd4.5Fe77B18.5 alloy
(Metalurgija, 2009)
The rapid-quenched (R/Q) and subsequently optimally annealed Nd-Fe-B alloy with 12 wt% Nd was characterized using the X-Ray diffractometry (XRD), transmission electron microscopy (TEM), high resolution transmission electron ...
Evolution of microstructure of melt-spun Nd-Fe-B alloy with low Nd content during the heat treatment
(Metalurgija, 2004)
In order to examine and study evolution of microstructure during the phase transformations for applied heat treatment regime for achieving the optimal values of magnetic properties of the investigated melt-spun Nd-Fe-B ...
The influence of heat treatment and finishing on the mechanical properties of laminar composites
(Savez inženjera metalurgije Jugoslavije- Yugoslav Association of Metallurgical Engineers, 2002)
The aim of this investigation was to define the optimum conditions of obtaining glass fabric - epoxy resin laminar composites with appropriate mechanical properties that satisfy the quality needed for production of printed ...